Skip to contentSkip to conversation

Bluetooth: btintel: Check firmware version before download

RFC Superseded Luiz Augusto von Dentz 3 participants 3 messages Feb 1, 2021 – Feb 3, 2021 Bluetooth drivers

v2 of 10 Superseded Latest is v10 →

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

RFC v2 1/1 Bluetooth: btintel: Check firmware version before download

From: Luiz Augusto von Dentz <[email protected]>

This checking the firmware build number, week and years matches and then skip the download process.

---
 drivers/bluetooth/btintel.c   | 88 +++++++++++++++++++++++++++--------
 drivers/bluetooth/btintel.h   |  5 +-
 drivers/bluetooth/btusb.c     | 22 +++++----
 drivers/bluetooth/hci_intel.c |  2 +-
 4 files changed, 84 insertions(+), 33 deletions(-)
drivers/bluetooth/btintel.c +68 -20
index 88ce5f0ffc4b..bf7b910966c8 100644
@@ -24,6 +24,14 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} _packed;
+
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
 
 static int btintel_download_firmware_payload(struct hci_dev *hdev,
 					     const struct firmware *fw,
-					     u32 *boot_param, size_t offset)
+					     size_t offset)
 {
 	int err;
 	const u8 *fw_ptr;
@@ -854,20 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		/* Each SKU has a different reset parameter to use in the
-		 * HCI_Intel_Reset command and it is embedded in the firmware
-		 * data. So, instead of using static value per SKU, check
-		 * the firmware data and save it for later use.
-		 */
-		if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
-			/* The boot parameter is the first 32-bit value
-			 * and rest of 3 octets are reserved.
-			 */
-			*boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
-
-			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
-		}
-
 		frag_len += sizeof(*cmd) + cmd->plen;
 
 		/* The parameter length of the secure send command requires
@@ -896,28 +890,84 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	return err;
 }
 
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+	u32 frag_len;
+
+	fw_ptr = fw->data;
+	frag_len = 0;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			bt_dev_dbg(hdev, "Boot Address: 0x%x\n"
+				   "Firmware Version: %u-%u.%u",
+				   le32_to_cpu(params->boot_addr),
+				   params->fw_build_num, params->fw_build_ww,
+				   params->fw_build_yy);
+
+			if (num == params->fw_build_num &&
+			    ww == params->fw_build_ww &&
+			    yy == params->fw_build_yy)
+				return true;
+			else
+				return false;
+		}
+
+		frag_len += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
 int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
 			      const struct firmware *fw,
 			      u32 *boot_param)
 {
 	int err;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->fw_build_num, ver->fw_build_ww,
+				     ver->fw_build_yy, fw, boot_param))
+		return -EALREADY;
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
 
-	return btintel_download_firmware_payload(hdev, fw, boot_param,
-						 RSA_HEADER_LEN);
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw, u32 *boot_param,
 				     u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw, ver->min_fw_build_yy,
+				     fw, boot_param))
+		return -EALREADY;
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
@@ -947,7 +997,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		if (err)
 			return err;
 
-		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 		if (err)
 			return err;
 	} else if (hw_variant >= 0x17) {
@@ -968,7 +1018,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
@@ -978,7 +1027,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
drivers/bluetooth/btintel.h +3 -2
index 6511b091caf5..51f1f2c883b4 100644
@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
 int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
-			      u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw,
 				     u32 *boot_param, u8 hw_variant,
 				     u8 sbe_type);
drivers/bluetooth/btusb.c +12 -10
index 4266c057746e..a06e86f52da3 100644
@@ -2612,14 +2612,15 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware_newgen(hdev, fw, boot_param,
+	err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
 					       INTEL_HW_VARIANT(ver->cnvi_bt),
 					       ver->sbe_type);
 	if (err < 0) {
-		/* When FW download fails, send Intel Reset to retry
-		 * FW download.
-		 */
-		btintel_reset_to_bootloader(hdev);
+		if (err != -EALREADY)
+			/* When FW download fails, send Intel Reset to retry
+			 * FW download.
+			 */
+			btintel_reset_to_bootloader(hdev);
 		goto done;
 	}
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
@@ -2806,12 +2807,13 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, boot_param);
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
 	if (err < 0) {
-		/* When FW download fails, send Intel Reset to retry
-		 * FW download.
-		 */
-		btintel_reset_to_bootloader(hdev);
+		if (err != -EALREADY)
+			/* When FW download fails, send Intel Reset to retry
+			 * FW download.
+			 */
+			btintel_reset_to_bootloader(hdev);
 		goto done;
 	}
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
drivers/bluetooth/hci_intel.c +1 -1
index b20a40fab83e..050fae33dab8 100644
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
 	set_bit(STATE_DOWNLOADING, &intel->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
 	if (err < 0)
 		goto done;
 
Signature · 1 line
2.26.2
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=425679

---Test result---

##############################

    Test: CheckPatch - PASS
    

    ##############################
    Test: CheckGitLint - PASS
    

    ##############################
    Test: CheckBuildK - PASS
    

    ##############################
    Test: CheckTestRunner: Setup - PASS
    

    ##############################
    Test: CheckTestRunner: l2cap-tester - PASS
    Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6

    ##############################
    Test: CheckTestRunner: bnep-tester - PASS
    Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: mgmt-tester - PASS
    Total: 416, Passed: 402 (96.6%), Failed: 0, Not Run: 14

    ##############################
    Test: CheckTestRunner: rfcomm-tester - PASS
    Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: sco-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: smp-tester - PASS
    Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

    ##############################
    Test: CheckTestRunner: userchan-tester - PASS
    Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0

---
Regards,
Linux Bluetooth

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e792e0
input_len: 0x000000000034ea20
output: 0x0000000001000000
output_len: 0x0000000001195358
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-gda5f46fc8d49 (root@c4d42e8af403) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Feb 2 00:20:33 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/l2cap-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/l2cap-tester
New process 38 created
Changing into directory /github/workspace

Basic L2CAP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic L2CAP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic L2CAP Socket - Success - setup complete
Basic L2CAP Socket - Success - run
Basic L2CAP Socket - Success - test passed
Basic L2CAP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic L2CAP Socket - Success - teardown complete
Basic L2CAP Socket - Success - done

Non-connected getpeername - Failure - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Non-connected getpeername - Failure - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Non-connected getpeername - Failure - setup complete Non-connected getpeername - Failure - run Non-connected getpeername - Failure - test passed Non-connected getpeername - Failure - teardown
Index Removed callback

    Index: 0x0000

Non-connected getpeername - Failure - teardown complete Non-connected getpeername - Failure - done

L2CAP BR/EDR Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Success - setup complete
L2CAP BR/EDR Client - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Success - test passed
L2CAP BR/EDR Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Success - teardown complete
L2CAP BR/EDR Client - Success - done

L2CAP BR/EDR Client SSP - Success 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 1 - setup complete L2CAP BR/EDR Client SSP - Success 1 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 1 - test passed L2CAP BR/EDR Client SSP - Success 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 1 - teardown complete L2CAP BR/EDR Client SSP - Success 1 - done

L2CAP BR/EDR Client SSP - Success 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client SSP - Success 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client SSP - Success 2 - setup complete L2CAP BR/EDR Client SSP - Success 2 - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client SSP - Success 2 - test passed L2CAP BR/EDR Client SSP - Success 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client SSP - Success 2 - teardown complete L2CAP BR/EDR Client SSP - Success 2 - done

L2CAP BR/EDR Client PIN Code - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client PIN Code - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client PIN Code - Success - setup complete L2CAP BR/EDR Client PIN Code - Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client PIN Code - Success - test passed L2CAP BR/EDR Client PIN Code - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client PIN Code - Success - teardown complete L2CAP BR/EDR Client PIN Code - Success - done

L2CAP BR/EDR Client - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Read Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Read Success - setup complete L2CAP BR/EDR Client - Read Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Read Success - test passed L2CAP BR/EDR Client - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Read Success - teardown complete L2CAP BR/EDR Client - Read Success - done

L2CAP BR/EDR Client - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Write Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Write Success - setup complete L2CAP BR/EDR Client - Write Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Write Success - test passed L2CAP BR/EDR Client - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Write Success - teardown complete L2CAP BR/EDR Client - Write Success - done

L2CAP BR/EDR Client - Invalid PSM 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 1 - setup complete L2CAP BR/EDR Client - Invalid PSM 1 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 1 - test passed L2CAP BR/EDR Client - Invalid PSM 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 1 - teardown complete L2CAP BR/EDR Client - Invalid PSM 1 - done

L2CAP BR/EDR Client - Invalid PSM 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 2 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Invalid PSM 2 - setup complete L2CAP BR/EDR Client - Invalid PSM 2 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 2 - test passed L2CAP BR/EDR Client - Invalid PSM 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 2 - teardown complete L2CAP BR/EDR Client - Invalid PSM 2 - done

L2CAP BR/EDR Client - Invalid PSM 3 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Invalid PSM 3 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Client enable SSP status 0x00
L2CAP BR/EDR Client - Invalid PSM 3 - setup complete L2CAP BR/EDR Client - Invalid PSM 3 - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP BR/EDR Client - Invalid PSM 3 - test passed L2CAP BR/EDR Client - Invalid PSM 3 - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Invalid PSM 3 - teardown complete L2CAP BR/EDR Client - Invalid PSM 3 - done

L2CAP BR/EDR Client - Socket Shut WR Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Client - Socket Shut WR Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP BR/EDR Client - Socket Shut WR Success - setup complete L2CAP BR/EDR Client - Socket Shut WR Success - run
Connect in progress
Successfully connected
L2CAP BR/EDR Client - Socket Shut WR Success - test passed L2CAP BR/EDR Client - Socket Shut WR Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Client - Socket Shut WR Success - teardown complete L2CAP BR/EDR Client - Socket Shut WR Success - done

L2CAP BR/EDR Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Success - setup complete
L2CAP BR/EDR Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Success - test passed
Successfully connected
L2CAP BR/EDR Server - Success - test passed
L2CAP BR/EDR Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Success - teardown complete
L2CAP BR/EDR Server - Success - done

L2CAP BR/EDR Server - Read Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Read Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Read Success - setup complete L2CAP BR/EDR Server - Read Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Read Success - test passed L2CAP BR/EDR Server - Read Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Read Success - teardown complete L2CAP BR/EDR Server - Read Success - done

L2CAP BR/EDR Server - Write Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Write Success - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Write Success - setup complete L2CAP BR/EDR Server - Write Success - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Write Success - test passed L2CAP BR/EDR Server - Write Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Write Success - teardown complete L2CAP BR/EDR Server - Write Success - done

L2CAP BR/EDR Server - Security Block - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Security Block - setup
Powering on controller
Controller powered on
Server enable SSP status 0x00
L2CAP BR/EDR Server - Security Block - setup complete L2CAP BR/EDR Server - Security Block - run
Listening for connections
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Security Block - test passed L2CAP BR/EDR Server - Security Block - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Security Block - teardown complete L2CAP BR/EDR Server - Security Block - done

L2CAP BR/EDR Server - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PSM - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PSM - setup complete L2CAP BR/EDR Server - Invalid PSM - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x03
L2CAP BR/EDR Server - Invalid PSM - test passed L2CAP BR/EDR Server - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PSM - teardown complete L2CAP BR/EDR Server - Invalid PSM - done

L2CAP BR/EDR Server - Invalid PDU - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid PDU - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid PDU - setup complete L2CAP BR/EDR Server - Invalid PDU - run
New client connection with handle 0x002a Sending L2CAP Request from client
Bluetooth: Wrong link type (-71)
Client received response code 0x01
L2CAP BR/EDR Server - Invalid PDU - test passed L2CAP BR/EDR Server - Invalid PDU - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid PDU - teardown complete L2CAP BR/EDR Server - Invalid PDU - done

L2CAP BR/EDR Server - Invalid Disconnect CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Disconnect CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Disconnect CID - setup complete L2CAP BR/EDR Server - Invalid Disconnect CID - run
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Disconnect CID - test passed L2CAP BR/EDR Server - Invalid Disconnect CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Disconnect CID - teardown complete L2CAP BR/EDR Server - Invalid Disconnect CID - done

L2CAP BR/EDR Server - Invalid Config CID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP BR/EDR Server - Invalid Config CID - setup
Powering on controller
Controller powered on
L2CAP BR/EDR Server - Invalid Config CID - setup complete L2CAP BR/EDR Server - Invalid Config CID - run
New client connection with handle 0x002a Sending L2CAP Request from client
Client received response code 0x01
L2CAP BR/EDR Server - Invalid Config CID - test passed L2CAP BR/EDR Server - Invalid Config CID - teardown
Index Removed callback

    Index: 0x0000

L2CAP BR/EDR Server - Invalid Config CID - teardown complete L2CAP BR/EDR Server - Invalid Config CID - done

L2CAP LE Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Success - setup complete
L2CAP LE Client - Success - run
Connect in progress
Successfully connected
L2CAP LE Client - Success - test passed
L2CAP LE Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Success - teardown complete
L2CAP LE Client - Success - done

L2CAP LE Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client, Direct Advertising - Success - setup complete L2CAP LE Client, Direct Advertising - Success - run
Connect in progress
Received advertising parameters HCI command
L2CAP LE Client, Direct Advertising - Success - test passed L2CAP LE Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client, Direct Advertising - Success - teardown complete L2CAP LE Client, Direct Advertising - Success - done

L2CAP LE Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client SMP - Success - setup complete
L2CAP LE Client SMP - Success - run
Connect in progress
Successfully connected
L2CAP LE Client SMP - Success - test passed
Bluetooth: hci0: link tx timeout
L2CAP LE Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client SMP - Success - teardown complete
L2CAP LE Client SMP - Success - done

L2CAP LE Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Command Reject - setup complete
L2CAP LE Client - Command Reject - run
Connect in progress
New connection with handle 0x002a
Connect failed: Connection refused (111)
L2CAP LE Client - Command Reject - test passed
L2CAP LE Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Command Reject - teardown complete L2CAP LE Client - Command Reject - done

L2CAP LE Client - Connection Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Connection Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Connection Reject - setup complete L2CAP LE Client - Connection Reject - run
Can't connect socket: No route to host (113)
L2CAP LE Client - Connection Reject - test passed L2CAP LE Client - Connection Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Connection Reject - teardown complete L2CAP LE Client - Connection Reject - done

L2CAP LE Client - Close socket 1 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 1 - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Close socket 1 - setup complete
L2CAP LE Client - Close socket 1 - run
Connect in progress, sk = 13
Will close socket during scan phase...
Checking whether scan was properly stopped...
L2CAP LE Client - Close socket 1 - test passed
L2CAP LE Client - Close socket 1 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 1 - teardown complete L2CAP LE Client - Close socket 1 - done

L2CAP LE Client - Close socket 2 - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Close socket 2 - setup
Powering on controller
Controller powered on
L2CAP LE Client - Close socket 2 - setup complete
L2CAP LE Client - Close socket 2 - run
Connect in progress, sk = 13
Client set connectable status 0x00
Client set connectable status 0x00
L2CAP LE Client - Close socket 2 - test passed
L2CAP LE Client - Close socket 2 - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Close socket 2 - teardown complete L2CAP LE Client - Close socket 2 - done

L2CAP LE Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets - setup complete L2CAP LE Client - Open two sockets - run
Connect in progress, sk = 13
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
Successfully connected
L2CAP LE Client - Open two sockets - test passed

(l2cap-tester:38): GLib-WARNING **: 00:20:42.014: Invalid file descriptor. L2CAP LE Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets - teardown complete L2CAP LE Client - Open two sockets - done

L2CAP LE Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP LE Client - Open two sockets close one - setup complete L2CAP LE Client - Open two sockets close one - run
Connect in progress, sk = 13
HCI Command 0x200b length 7
HCI Command 0x200c length 2
Connect in progress, sk = 14
Closing first socket! 13
HCI Command 0x200c length 2
Client set connectable status 0x00
HCI Command 0x200d length 25
HCI Command 0x2016 length 2
Successfully connected
L2CAP LE Client - Open two sockets close one - test passed

(l2cap-tester:38): GLib-WARNING **: 00:20:42.050: Invalid file descriptor. L2CAP LE Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Open two sockets close one - teardown complete L2CAP LE Client - Open two sockets close one - done

L2CAP LE Client - Invalid PSM - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Client - Invalid PSM - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE Client - Invalid PSM - setup complete
L2CAP LE Client - Invalid PSM - run
Connect in progress
Connect failed: Connection refused (111)
L2CAP LE Client - Invalid PSM - test passed
L2CAP LE Client - Invalid PSM - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Client - Invalid PSM - teardown complete
L2CAP LE Client - Invalid PSM - done

L2CAP LE Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE Server - Success - setup complete
L2CAP LE Server - Success - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Successfully connected
L2CAP LE Server - Success - test passed
Client received response code 0x15
L2CAP LE Server - Success - test passed
L2CAP LE Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Success - teardown complete
L2CAP LE Server - Success - done

L2CAP LE Server - Nval SCID - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE Server - Nval SCID - setup
Powering on controller
Controller powered on
L2CAP LE Server - Nval SCID - setup complete
L2CAP LE Server - Nval SCID - run
Listening for connections
New client connection with handle 0x002a
Sending L2CAP Request from client
Client received response code 0x15
L2CAP LE Server - Nval SCID - test passed
L2CAP LE Server - Nval SCID - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE Server - Nval SCID - teardown complete
L2CAP LE Server - Nval SCID - done

L2CAP Ext-Flowctl Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Success - setup complete L2CAP Ext-Flowctl Client - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Success - test not run L2CAP Ext-Flowctl Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Success - teardown complete L2CAP Ext-Flowctl Client - Success - done

L2CAP Ext-Flowctl Client, Direct Advertising - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client, Direct Advertising - Success - setup complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client, Direct Advertising - Success - test not run L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client, Direct Advertising - Success - teardown complete L2CAP Ext-Flowctl Client, Direct Advertising - Success - done

L2CAP Ext-Flowctl Client SMP - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client SMP - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client SMP - Success - setup complete L2CAP Ext-Flowctl Client SMP - Success - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client SMP - Success - test not run L2CAP Ext-Flowctl Client SMP - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client SMP - Success - teardown complete L2CAP Ext-Flowctl Client SMP - Success - done

L2CAP Ext-Flowctl Client - Command Reject - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Command Reject - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP Ext-Flowctl Client - Command Reject - setup complete L2CAP Ext-Flowctl Client - Command Reject - run
Can't set mode: Protocol not available (92)
L2CAP Ext-Flowctl Client - Command Reject - test not run L2CAP Ext-Flowctl Client - Command Reject - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Command Reject - teardown complete L2CAP Ext-Flowctl Client - Command Reject - done

L2CAP Ext-Flowctl Client - Open two sockets - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets - setup complete L2CAP Ext-Flowctl Client - Open two sockets - run
Can't set mode: Protocol not available (92) Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets - test not run L2CAP Ext-Flowctl Client - Open two sockets - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets - teardown complete L2CAP Ext-Flowctl Client - Open two sockets - done

L2CAP Ext-Flowctl Client - Open two sockets close one - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP Ext-Flowctl Client - Open two sockets close one - setup
Powering on controller
Controller powered on
L2CAP Ext-Flowctl Client - Open two sockets close one - setup complete L2CAP Ext-Flowctl Client - Open two sockets close one - run
Can't set mode: Protocol not available (92)
Error in create_l2cap_sock
L2CAP Ext-Flowctl Client - Open two sockets close one - test not run L2CAP Ext-Flowctl Client - Open two sockets close one - teardown
Index Removed callback

    Index: 0x0000

L2CAP Ext-Flowctl Client - Open two sockets close one - teardown complete L2CAP Ext-Flowctl Client - Open two sockets close one - done

L2CAP LE ATT Client - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Client - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
L2CAP LE ATT Client - Success - setup complete
L2CAP LE ATT Client - Success - run
Connect in progress
Successfully connected
L2CAP LE ATT Client - Success - test passed
L2CAP LE ATT Client - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Client - Success - teardown complete
L2CAP LE ATT Client - Success - done

L2CAP LE ATT Server - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

L2CAP LE ATT Server - Success - setup
Powering on controller
Controller powered on
L2CAP LE ATT Server - Success - setup complete
L2CAP LE ATT Server - Success - run
Listening for connections
New client connection with handle 0x002a
Successfully connected
L2CAP LE ATT Server - Success - test passed
L2CAP LE ATT Server - Success - teardown
Index Removed callback

    Index: 0x0000

L2CAP LE ATT Server - Success - teardown complete
L2CAP LE ATT Server - Success - done

Test Summary
------------

Basic L2CAP Socket - Success                         Passed       0.063 seconds
Non-connected getpeername - Failure                  Passed       0.014 seconds
L2CAP BR/EDR Client - Success                        Passed       0.028 seconds
L2CAP BR/EDR Client SSP - Success 1                  Passed       0.023 seconds
L2CAP BR/EDR Client SSP - Success 2                  Passed       0.019 seconds
L2CAP BR/EDR Client PIN Code - Success               Passed       0.017 seconds
L2CAP BR/EDR Client - Read Success                   Passed       0.015 seconds
L2CAP BR/EDR Client - Write Success                  Passed       0.020 seconds
L2CAP BR/EDR Client - Invalid PSM 1                  Passed       0.016 seconds
L2CAP BR/EDR Client - Invalid PSM 2                  Passed       0.015 seconds
L2CAP BR/EDR Client - Invalid PSM 3                  Passed       0.014 seconds
L2CAP BR/EDR Client - Socket Shut WR Success         Passed       0.015 seconds
L2CAP BR/EDR Server - Success                        Passed       0.017 seconds
L2CAP BR/EDR Server - Read Success                   Passed       0.014 seconds
L2CAP BR/EDR Server - Write Success                  Passed       0.019 seconds
L2CAP BR/EDR Server - Security Block                 Passed       0.017 seconds
L2CAP BR/EDR Server - Invalid PSM                    Passed       0.018 seconds
L2CAP BR/EDR Server - Invalid PDU                    Passed       0.015 seconds
L2CAP BR/EDR Server - Invalid Disconnect CID         Passed       0.017 seconds
L2CAP BR/EDR Server - Invalid Config CID             Passed       0.017 seconds
L2CAP LE Client - Success                            Passed       0.020 seconds
L2CAP LE Client, Direct Advertising - Success        Passed       0.018 seconds
L2CAP LE Client SMP - Success                        Passed       0.028 seconds
L2CAP LE Client - Command Reject                     Passed       0.018 seconds
L2CAP LE Client - Connection Reject                  Passed       0.015 seconds
L2CAP LE Client - Close socket 1                     Passed       0.012 seconds
L2CAP LE Client - Close socket 2                     Passed       0.016 seconds
L2CAP LE Client - Open two sockets                   Passed       0.052 seconds
L2CAP LE Client - Open two sockets close one         Passed       0.022 seconds
L2CAP LE Client - Invalid PSM                        Passed       0.012 seconds
L2CAP LE Server - Success                            Passed       0.014 seconds
L2CAP LE Server - Nval SCID                          Passed       0.012 seconds
L2CAP Ext-Flowctl Client - Success                   Not Run   
L2CAP Ext-Flowctl Client, Direct Advertising - Success Not Run   
L2CAP Ext-Flowctl Client SMP - Success               Not Run   
L2CAP Ext-Flowctl Client - Command Reject            Not Run   
L2CAP Ext-Flowctl Client - Open two sockets          Not Run   
L2CAP Ext-Flowctl Client - Open two sockets close one Not Run   
L2CAP LE ATT Client - Success                        Passed       0.016 seconds
L2CAP LE ATT Server - Success                        Passed       0.017 seconds

Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6 Overall execution time: 0.784 seconds Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e792e0
input_len: 0x000000000034ea20
output: 0x0000000001000000
output_len: 0x0000000001195358
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-gda5f46fc8d49 (root@c4d42e8af403) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Feb 2 00:20:33 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/bnep-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/bnep-tester
New process 38 created
Changing into directory /github/workspace

Basic BNEP Socket - Success - init
Read Index List callback

    Status: 0x00
  New hciemu instance created
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: 0x00
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Basic BNEP Socket - Success - setup
Powering on controller
Controller powered on
Client set connectable status 0x00
Basic BNEP Socket - Success - setup complete
Basic BNEP Socket - Success - run
Basic BNEP Socket - Success - test passed
Basic BNEP Socket - Success - teardown
Index Removed callback

    Index: 0x0000

Basic BNEP Socket - Success - teardown complete
Basic BNEP Socket - Success - done

Test Summary
------------
Basic BNEP Socket - Success Passed 0.056 seconds
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0636 seconds Process 38 exited with status 0
reboot: Restarting system

c[?7lSeaBIOS (version 1.13.0-1ubuntu1.1) Booting from ROM..c[?7learly console in extract_kernel
input_data: 0x0000000001e792e0
input_len: 0x000000000034ea20
output: 0x0000000001000000
output_len: 0x0000000001195358
kernel_total_size: 0x000000000102c000
needed_size: 0x0000000001200000
trampoline_32bit: 0x000000000009d000
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
Linux version 5.10.0-gda5f46fc8d49 (root@c4d42e8af403) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 Tue Feb 2 00:20:33 UTC 2021
Command line: console=ttyS0,115200n8 earlyprintk=serial rootfstype=9p rootflags=trans=virtio,version=9p2000.L acpi=off pci=noacpi noapic quiet ro init=/github/workspace/bluez/tools/test-runner TESTHOME=/github/workspace TESTDBUS=0 TESTMONITOR=0 TESTDEVS=0 TESTAUTO=0 TESTARGS='/github/workspace/bluez/tools/mgmt-tester' x86/fpu: x87 FPU will use FXSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000bffdfff] usable
BIOS-e820: [mem 0x000000000bffe000-0x000000000bffffff] reserved
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
printk: bootconsole [earlyser0] enabled
Memory KASLR using RDTSC...
Poking KASLR using RDTSC...
Mounting sysfs to /sys
Mounting proc to /proc
Mounting devtmpfs to /dev
Creating /dev/pts
Mounting devpts to /dev/pts
Creating /dev/shm
Mounting tmpfs to /dev/shm
Mounting tmpfs to /run
Mounting tmpfs to /tmp
Mounting debugfs to /sys/kernel/debug
Linking /dev/fd to /proc/self/fd
Linking /dev/stdin to /proc/self/fd/0
Linking /dev/stdout to /proc/self/fd/1
Linking /dev/stderr to /proc/self/fd/2
Creating new session group leader
Setting controlling terminal
Creating /var/lib/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/bluetooth
Failed to create filesystem: No such file or directory
Creating /etc/dbus-1
Failed to create filesystem: No such file or directory
Creating /usr/share/dbus-1
Running command /github/workspace/bluez/tools/mgmt-tester
New process 38 created
Changing into directory /github/workspace

Controller setup - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup - setup
Controller setup - setup complete
Controller setup - run
Controller setup - test passed
Controller setup - teardown
Index Removed callback

    Index: 0x0000

Controller setup - teardown complete
Controller setup - done

Controller setup (BR/EDR-only) - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (BR/EDR-only) - setup
Controller setup (BR/EDR-only) - setup complete
Controller setup (BR/EDR-only) - run
Controller setup (BR/EDR-only) - test passed
Controller setup (BR/EDR-only) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (BR/EDR-only) - teardown complete Controller setup (BR/EDR-only) - done

Controller setup (LE) - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Controller setup (LE) - setup
Controller setup (LE) - setup complete
Controller setup (LE) - run
Controller setup (LE) - test passed
Controller setup (LE) - teardown
Index Removed callback

    Index: 0x0000

Controller setup (LE) - teardown complete
Controller setup (LE) - done

Invalid command - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Invalid command - setup
Invalid command - setup complete
Invalid command - run
Sending <unknown opcode> (0xffff)
Test condition added, total 1
<unknown opcode> (0xffff): Unknown Command (0x01) Test condition complete, 0 left
Invalid command - test passed
Invalid command - teardown
Index Removed callback

    Index: 0x0000

Invalid command - teardown complete
Invalid command - done

Read version - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Success - setup
Read version - Success - setup complete
Read version - Success - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Success (0x00)
Test condition complete, 0 left
Read version - Success - test passed
Read version - Success - teardown
Index Removed callback

    Index: 0x0000

Read version - Success - teardown complete
Read version - Success - done

Read version - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid parameters - setup Read version - Invalid parameters - setup complete Read version - Invalid parameters - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Parameters (0x0d) Test condition complete, 0 left
Read version - Invalid parameters - test passed Read version - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid parameters - teardown complete Read version - Invalid parameters - done

Read version - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read version - Invalid index - setup
Read version - Invalid index - setup complete
Read version - Invalid index - run
Sending Read Version (0x0001)
Test condition added, total 1
Read Version (0x0001): Invalid Index (0x11)
Test condition complete, 0 left
Read version - Invalid index - test passed
Read version - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read version - Invalid index - teardown complete
Read version - Invalid index - done

Read commands - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid parameters - setup Read commands - Invalid parameters - setup complete Read commands - Invalid parameters - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Parameters (0x0d) Test condition complete, 0 left
Read commands - Invalid parameters - test passed Read commands - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid parameters - teardown complete Read commands - Invalid parameters - done

Read commands - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read commands - Invalid index - setup
Read commands - Invalid index - setup complete
Read commands - Invalid index - run
Sending Read Commands (0x0002)
Test condition added, total 1
Read Commands (0x0002): Invalid Index (0x11)
Test condition complete, 0 left
Read commands - Invalid index - test passed
Read commands - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read commands - Invalid index - teardown complete
Read commands - Invalid index - done

Read index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid parameters - setup Read index list - Invalid parameters - setup complete Read index list - Invalid parameters - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Parameters (0x0d) Test condition complete, 0 left
Read index list - Invalid parameters - test passed Read index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid parameters - teardown complete Read index list - Invalid parameters - done

Read index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read index list - Invalid index - setup
Read index list - Invalid index - setup complete
Read index list - Invalid index - run
Sending Read Index List (0x0003)
Test condition added, total 1
Read Index List (0x0003): Invalid Index (0x11)
Test condition complete, 0 left
Read index list - Invalid index - test passed
Read index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read index list - Invalid index - teardown complete Read index list - Invalid index - done

Read info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid parameters - setup
Read info - Invalid parameters - setup complete Read info - Invalid parameters - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Parameters (0x0d) Test condition complete, 0 left
Read info - Invalid parameters - test passed
Read info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid parameters - teardown complete Read info - Invalid parameters - done

Read info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read info - Invalid index - setup
Read info - Invalid index - setup complete Read info - Invalid index - run
Sending Read Controller Info (0x0004)
Test condition added, total 1
Read Controller Info (0x0004): Invalid Index (0x11) Test condition complete, 0 left
Read info - Invalid index - test passed
Read info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read info - Invalid index - teardown complete
Read info - Invalid index - done

Read unconfigured index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid parameters - setup Read unconfigured index list - Invalid parameters - setup complete Read unconfigured index list - Invalid parameters - run
Sending Read Unconfigured Index List (0x0036)
Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Parameters (0x0d) Test condition complete, 0 left
Read unconfigured index list - Invalid parameters - test passed Read unconfigured index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid parameters - teardown complete Read unconfigured index list - Invalid parameters - done

Read unconfigured index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read unconfigured index list - Invalid index - setup Read unconfigured index list - Invalid index - setup complete Read unconfigured index list - Invalid index - run
Sending Read Unconfigured Index List (0x0036) Test condition added, total 1
Read Unconfigured Index List (0x0036): Invalid Index (0x11) Test condition complete, 0 left
Read unconfigured index list - Invalid index - test passed Read unconfigured index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read unconfigured index list - Invalid index - teardown complete Read unconfigured index list - Invalid index - done

Read configuration info - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid parameters - setup
Read configuration info - Invalid parameters - setup complete
Read configuration info - Invalid parameters - run
Sending Read Controller Configuration Information (0x0037)
Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Parameters (0x0d) Test condition complete, 0 left
Read configuration info - Invalid parameters - test passed
Read configuration info - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid parameters - teardown complete Read configuration info - Invalid parameters - done

Read configuration info - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read configuration info - Invalid index - setup
Read configuration info - Invalid index - setup complete
Read configuration info - Invalid index - run
Sending Read Controller Configuration Information (0x0037) Test condition added, total 1
Read Controller Configuration Information (0x0037): Invalid Index (0x11) Test condition complete, 0 left
Read configuration info - Invalid index - test passed
Read configuration info - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read configuration info - Invalid index - teardown complete Read configuration info - Invalid index - done

Read extended index list - Invalid parameters - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid parameters - setup
Read extended index list - Invalid parameters - setup complete Read extended index list - Invalid parameters - run
Sending Read Extended Controller Index List (0x003c)
Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Parameters (0x0d) Test condition complete, 0 left
Read extended index list - Invalid parameters - test passed Read extended index list - Invalid parameters - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid parameters - teardown complete Read extended index list - Invalid parameters - done

Read extended index list - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Read extended index list - Invalid index - setup
Read extended index list - Invalid index - setup complete Read extended index list - Invalid index - run
Sending Read Extended Controller Index List (0x003c) Test condition added, total 1
Read Extended Controller Index List (0x003c): Invalid Index (0x11) Test condition complete, 0 left
Read extended index list - Invalid index - test passed Read extended index list - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Read extended index list - Invalid index - teardown complete Read extended index list - Invalid index - done

Set powered on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Success - setup
Set powered on - Success - setup complete
Set powered on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered on - Success - test passed
Set powered on - Success - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set powered on - Success - teardown complete
Set powered on - Success - done

Set powered on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 1 - setup Set powered on - Invalid parameters 1 - setup complete Set powered on - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 1 - test passed Set powered on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 1 - teardown complete Set powered on - Invalid parameters 1 - done

Set powered on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 2 - setup Set powered on - Invalid parameters 2 - setup complete Set powered on - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 2 - test passed Set powered on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 2 - teardown complete Set powered on - Invalid parameters 2 - done

Set powered on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid parameters 3 - setup Set powered on - Invalid parameters 3 - setup complete Set powered on - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered on - Invalid parameters 3 - test passed Set powered on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid parameters 3 - teardown complete Set powered on - Invalid parameters 3 - done

Set powered on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Invalid index - setup
Set powered on - Invalid index - setup complete
Set powered on - Invalid index - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Index (0x11)
Test condition complete, 0 left
Set powered on - Invalid index - test passed
Set powered on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Invalid index - teardown complete Set powered on - Invalid index - done

Set powered on - Privacy and Advertising - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set powered on - Privacy and Advertising - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered on - Privacy and Advertising - setup complete Set powered on - Privacy and Advertising - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Success (0x00)
Test condition complete, 0 left
Set powered on - Privacy and Advertising - test passed Set powered on - Privacy and Advertising - teardown
Index Removed callback

    Index: 0x0000

Set powered on - Privacy and Advertising - teardown complete Set powered on - Privacy and Advertising - done

Set powered off - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Success - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Success - setup complete
Set powered off - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Powered (0x0005)
Test condition added, total 2
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set powered off - Success - test passed
Set powered off - Success - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Success - teardown complete
Set powered off - Success - done

Set powered off - Class of Device - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Class of Device - setup
Setting device class and powering on Controller powered on
Client set connectable: Success (0x00)
Set powered off - Class of Device - setup complete Set powered off - Class of Device - run
Registering new settings notification Test condition added, total 1 Registering Class of Device Changed notification Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
Set Powered (0x0005): Success (0x00) Test condition complete, 2 left
New Class of Device Changed event received Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set powered off - Class of Device - test passed Set powered off - Class of Device - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Class of Device - teardown complete Set powered off - Class of Device - done

Set powered off - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 1 - setup complete Set powered off - Invalid parameters 1 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 1 - test passed Set powered off - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 1 - teardown complete Set powered off - Invalid parameters 1 - done

Set powered off - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 2 - setup complete Set powered off - Invalid parameters 2 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 2 - test passed Set powered off - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 2 - teardown complete Set powered off - Invalid parameters 2 - done

Set powered off - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set powered off - Invalid parameters 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set powered off - Invalid parameters 3 - setup complete Set powered off - Invalid parameters 3 - run
Sending Set Powered (0x0005)
Test condition added, total 1
Set Powered (0x0005): Invalid Parameters (0x0d) Test condition complete, 0 left
Set powered off - Invalid parameters 3 - test passed Set powered off - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set powered off - Invalid parameters 3 - teardown complete Set powered off - Invalid parameters 3 - done

Set connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 1 - setup
Set connectable on - Success 1 - setup complete
Set connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000082 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 1 - test passed
Set connectable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Success 1 - teardown complete Set connectable on - Success 1 - done

Set connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on - Success 2 - setup complete
Set connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000083 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable on - Success 2 - test passed
Set connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on - Success 2 - teardown complete Set connectable on - Success 2 - done

Set connectable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 1 - setup Set connectable on - Invalid parameters 1 - setup complete Set connectable on - Invalid parameters 1 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 1 - test passed Set connectable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 1 - teardown complete Set connectable on - Invalid parameters 1 - done

Set connectable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 2 - setup Set connectable on - Invalid parameters 2 - setup complete Set connectable on - Invalid parameters 2 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 2 - test passed Set connectable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 2 - teardown complete Set connectable on - Invalid parameters 2 - done

Set connectable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid parameters 3 - setup Set connectable on - Invalid parameters 3 - setup complete Set connectable on - Invalid parameters 3 - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Parameters (0x0d) Test condition complete, 0 left
Set connectable on - Invalid parameters 3 - test passed Set connectable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid parameters 3 - teardown complete Set connectable on - Invalid parameters 3 - done

Set connectable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on - Invalid index - setup Set connectable on - Invalid index - setup complete Set connectable on - Invalid index - run
Sending Set Connectable (0x0007)
Test condition added, total 1
Set Connectable (0x0007): Invalid Index (0x11) Test condition complete, 0 left
Set connectable on - Invalid index - test passed Set connectable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set connectable on - Invalid index - teardown complete Set connectable on - Invalid index - done

Set connectable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 1 - setup Set connectable on (LE) - Success 1 - setup complete Set connectable on (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000202 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 1 - test passed Set connectable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 1 - teardown complete Set connectable on (LE) - Success 1 - done

Set connectable on (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 2 - setup complete Set connectable on (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000203 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 2 - test passed Set connectable on (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 2 - teardown complete Set connectable on (LE) - Success 2 - done

Set connectable on (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable on (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable on (LE) - Success 3 - setup complete Set connectable on (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000603 received Unregistering new settings notification Test condition complete, 0 left
Set connectable on (LE) - Success 3 - test passed Set connectable on (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable on (LE) - Success 3 - teardown complete Set connectable on (LE) - Success 3 - done

Set connectable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 1 - setup complete
Set connectable off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000080 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 1 - test passed
Set connectable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off - Success 1 - teardown complete Set connectable off - Success 1 - done

Set connectable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 2 - setup complete
Set connectable off - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 2 - test passed
Set connectable off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 2 - teardown complete Set connectable off - Success 2 - done

Set connectable off - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off - Success 3 - setup complete
Set connectable off - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 3 - test passed
Set connectable off - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 3 - teardown complete Set connectable off - Success 3 - done

Set connectable off - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off - Success 4 - setup
Initial settings completed
Powering on controller (with added device)
Controller powered on
Client set connectable: Success (0x00)
Set connectable off - Success 4 - setup complete
Set connectable off - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Connectable (0x0007): Success (0x00)
Test condition complete, 1 left
New settings 0x00000081 received
Unregistering new settings notification
Test condition complete, 0 left
Set connectable off - Success 4 - test passed
Set connectable off - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off - Success 4 - teardown complete Set connectable off - Success 4 - done

Set connectable off (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 1 - setup complete Set connectable off (LE) - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Connectable (0x0007)
Test condition added, total 2
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000200 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 1 - test passed Set connectable off (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 1 - teardown complete Set connectable off (LE) - Success 1 - done

Set connectable off (LE) - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 2 - setup complete Set connectable off (LE) - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 2 - test passed Set connectable off (LE) - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 2 - teardown complete Set connectable off (LE) - Success 2 - done

Set connectable off (LE) - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 3 - setup complete Set connectable off (LE) - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 3 - test passed Set connectable off (LE) - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 3 - teardown complete Set connectable off (LE) - Success 3 - done

Set connectable off (LE) - Success 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set connectable off (LE) - Success 4 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set connectable off (LE) - Success 4 - setup complete Set connectable off (LE) - Success 4 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Connectable (0x0007)
Test condition added, total 3
HCI Command 0x2008 length 32
HCI Command 0x200a length 1
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
Test condition complete, 2 left
HCI Command 0x200a length 1
Set Connectable (0x0007): Success (0x00) Test condition complete, 1 left
New settings 0x00000601 received Unregistering new settings notification Test condition complete, 0 left
Set connectable off (LE) - Success 4 - test passed Set connectable off (LE) - Success 4 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set connectable off (LE) - Success 4 - teardown complete Set connectable off (LE) - Success 4 - done

Set fast connectable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 1 - setup complete Set fast connectable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000087 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 1 - test passed Set fast connectable on - Success 1 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 1 - teardown complete Set fast connectable on - Success 1 - done

Set fast connectable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Success 2 - setup complete Set fast connectable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000085 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 2 - test passed Set fast connectable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 2 - teardown complete Set fast connectable on - Success 2 - done

Set fast connectable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Success 3 - setup Set fast connectable on - Success 3 - setup complete Set fast connectable on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Sending Set Fast Connectable (0x0008)
Test condition added, total 2
Set Fast Connectable (0x0008): Success (0x00) Test condition complete, 1 left
New settings 0x00000084 received Unregistering new settings notification Test condition complete, 0 left
Set fast connectable on - Success 3 - test passed Set fast connectable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Success 3 - teardown complete Set fast connectable on - Success 3 - done

Set fast connectable on - Invalid Params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Invalid Params 1 - setup Set fast connectable on - Invalid Params 1 - setup complete Set fast connectable on - Invalid Params 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Invalid Parameters (0x0d) Test condition complete, 0 left
Set fast connectable on - Invalid Params 1 - test passed Set fast connectable on - Invalid Params 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Invalid Params 1 - teardown complete Set fast connectable on - Invalid Params 1 - done

Set fast connectable on - Not Supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set fast connectable on - Not Supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set fast connectable on - Not Supported 1 - setup complete Set fast connectable on - Not Supported 1 - run
Sending Set Fast Connectable (0x0008)
Test condition added, total 1
Set Fast Connectable (0x0008): Not Supported (0x0c) Test condition complete, 0 left
Set fast connectable on - Not Supported 1 - test passed Set fast connectable on - Not Supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set fast connectable on - Not Supported 1 - teardown complete Set fast connectable on - Not Supported 1 - done

Set bondable on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Success - setup
Set bondable on - Success - setup complete
Set bondable on - Success - run
Registering new settings notification
Test condition added, total 1
Sending Set Bondable (0x0009)
Test condition added, total 2
Set Bondable (0x0009): Success (0x00)
Test condition complete, 1 left
New settings 0x00000090 received
Unregistering new settings notification
Test condition complete, 0 left
Set bondable on - Success - test passed
Set bondable on - Success - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Success - teardown complete
Set bondable on - Success - done

Set bondable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 1 - setup Set bondable on - Invalid parameters 1 - setup complete Set bondable on - Invalid parameters 1 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 1 - test passed Set bondable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 1 - teardown complete Set bondable on - Invalid parameters 1 - done

Set bondable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 2 - setup Set bondable on - Invalid parameters 2 - setup complete Set bondable on - Invalid parameters 2 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 2 - test passed Set bondable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 2 - teardown complete Set bondable on - Invalid parameters 2 - done

Set bondable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid parameters 3 - setup Set bondable on - Invalid parameters 3 - setup complete Set bondable on - Invalid parameters 3 - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Parameters (0x0d) Test condition complete, 0 left
Set bondable on - Invalid parameters 3 - test passed Set bondable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid parameters 3 - teardown complete Set bondable on - Invalid parameters 3 - done

Set bondable on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set bondable on - Invalid index - setup
Set bondable on - Invalid index - setup complete
Set bondable on - Invalid index - run
Sending Set Bondable (0x0009)
Test condition added, total 1
Set Bondable (0x0009): Invalid Index (0x11)
Test condition complete, 0 left
Set bondable on - Invalid index - test passed
Set bondable on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set bondable on - Invalid index - teardown complete Set bondable on - Invalid index - done

Set discoverable on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 1 - setup Set discoverable on - Invalid parameters 1 - setup complete Set discoverable on - Invalid parameters 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 1 - test passed Set discoverable on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 1 - teardown complete Set discoverable on - Invalid parameters 1 - done

Set discoverable on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 2 - setup Set discoverable on - Invalid parameters 2 - setup complete Set discoverable on - Invalid parameters 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 2 - test passed Set discoverable on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 2 - teardown complete Set discoverable on - Invalid parameters 2 - done

Set discoverable on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 3 - setup Set discoverable on - Invalid parameters 3 - setup complete Set discoverable on - Invalid parameters 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 3 - test passed Set discoverable on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 3 - teardown complete Set discoverable on - Invalid parameters 3 - done

Set discoverable on - Invalid parameters 4 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Invalid parameters 4 - setup Set discoverable on - Invalid parameters 4 - setup complete Set discoverable on - Invalid parameters 4 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Invalid Parameters (0x0d) Test condition complete, 0 left
Set discoverable on - Invalid parameters 4 - test passed Set discoverable on - Invalid parameters 4 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Invalid parameters 4 - teardown complete Set discoverable on - Invalid parameters 4 - done

Set discoverable on - Not powered 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 1 - setup Set discoverable on - Not powered 1 - setup complete Set discoverable on - Not powered 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 1 - test passed Set discoverable on - Not powered 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 1 - teardown complete Set discoverable on - Not powered 1 - done

Set discoverable on - Not powered 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Not powered 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Not powered 2 - setup complete Set discoverable on - Not powered 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Not Powered (0x0f) Test condition complete, 0 left
Set discoverable on - Not powered 2 - test passed Set discoverable on - Not powered 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Not powered 2 - teardown complete Set discoverable on - Not powered 2 - done

Set discoverable on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 1 - setup complete
Set discoverable on - Rejected 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 1 - test passed
Set discoverable on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 1 - teardown complete Set discoverable on - Rejected 1 - done

Set discoverable on - Rejected 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 2 - setup complete
Set discoverable on - Rejected 2 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 2 - test passed
Set discoverable on - Rejected 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 2 - teardown complete Set discoverable on - Rejected 2 - done

Set discoverable on - Rejected 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Rejected 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Rejected 3 - setup complete
Set discoverable on - Rejected 3 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Rejected (0x0b)
Test condition complete, 0 left
Set discoverable on - Rejected 3 - test passed
Set discoverable on - Rejected 3 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Rejected 3 - teardown complete Set discoverable on - Rejected 3 - done

Set discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 1 - setup complete
Set discoverable on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008a received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 1 - test passed
Set discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 1 - teardown complete Set discoverable on - Success 1 - done

Set discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on - Success 2 - setup complete
Set discoverable on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Discoverable (0x0006)
Test condition added, total 3
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 2 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 1 left
New settings 0x0000008b received
Unregistering new settings notification
Test condition complete, 0 left
Set discoverable on - Success 2 - test passed
Set discoverable on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set discoverable on - Success 2 - teardown complete Set discoverable on - Success 2 - done

Set discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable on (LE) - Success 1 - setup complete Set discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set discoverable on (LE) - Success 1 - test passed Set discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable on (LE) - Success 1 - teardown complete Set discoverable on (LE) - Success 1 - done

Set discoverable off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 1 - setup complete
Set discoverable off - Success 1 - run
Sending Set Discoverable (0x0006)
Test condition added, total 1
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 1 - test passed
Set discoverable off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 1 - teardown complete Set discoverable off - Success 1 - done

Set discoverable off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set discoverable off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set discoverable off - Success 2 - setup complete
Set discoverable off - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c1a length 1
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set discoverable off - Success 2 - test passed
Set discoverable off - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set discoverable off - Success 2 - teardown complete Set discoverable off - Success 2 - done

Set limited discoverable on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 1 - setup complete Set limited discoverable on - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
Test condition complete, 1 left
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 1 - test passed Set limited discoverable on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 1 - teardown complete Set limited discoverable on - Success 1 - done

Set limited discoverable on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 2 - setup complete Set limited discoverable on - Success 2 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
Test condition complete, 1 left
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 2 - test passed Set limited discoverable on - Success 2 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 2 - teardown complete Set limited discoverable on - Success 2 - done

Set limited discoverable on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on - Success 3 - setup complete Set limited discoverable on - Success 3 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x0c3a length 4
HCI Command 0x0c1a length 1
HCI Command 0x0c24 length 3
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00) Test condition complete, 0 left
Set limited discoverable on - Success 3 - test passed Set limited discoverable on - Success 3 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on - Success 3 - teardown complete Set limited discoverable on - Success 3 - done

Set limited discoverable on (LE) - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001be1b
    Current settings: 0x00000200
    Class: 0x000000
    Name: 
    Short name: 

Set limited discoverable on (LE) - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set limited discoverable on (LE) - Success 1 - setup complete Set limited discoverable on (LE) - Success 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Discoverable (0x0006)
Test condition added, total 2
HCI Command 0x2008 length 32
Test condition complete, 1 left
Set Discoverable (0x0006): Success (0x00)
Test condition complete, 0 left
Set limited discoverable on (LE) - Success 1 - test passed Set limited discoverable on (LE) - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set limited discoverable on (LE) - Success 1 - teardown complete Set limited discoverable on (LE) - Success 1 - done

Set link security on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 1 - setup
Set link security on - Success 1 - setup complete
Set link security on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a0 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 1 - test passed
Set link security on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Success 1 - teardown complete Set link security on - Success 1 - done

Set link security on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 2 - setup complete
Set link security on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 2 - test passed
Set link security on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 2 - teardown complete Set link security on - Success 2 - done

Set link security on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security on - Success 3 - setup complete
Set link security on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000a1 received
Unregistering new settings notification
Test condition complete, 0 left
Set link security on - Success 3 - test passed
Set link security on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security on - Success 3 - teardown complete Set link security on - Success 3 - done

Set link security on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 1 - setup Set link security on - Invalid parameters 1 - setup complete Set link security on - Invalid parameters 1 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 1 - test passed Set link security on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 1 - teardown complete Set link security on - Invalid parameters 1 - done

Set link security on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 2 - setup Set link security on - Invalid parameters 2 - setup complete Set link security on - Invalid parameters 2 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 2 - test passed Set link security on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 2 - teardown complete Set link security on - Invalid parameters 2 - done

Set link security on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid parameters 3 - setup Set link security on - Invalid parameters 3 - setup complete Set link security on - Invalid parameters 3 - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Parameters (0x0d) Test condition complete, 0 left
Set link security on - Invalid parameters 3 - test passed Set link security on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid parameters 3 - teardown complete Set link security on - Invalid parameters 3 - done

Set link security on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security on - Invalid index - setup Set link security on - Invalid index - setup complete Set link security on - Invalid index - run
Sending Set Link Security (0x000a)
Test condition added, total 1
Set Link Security (0x000a): Invalid Index (0x11) Test condition complete, 0 left
Set link security on - Invalid index - test passed Set link security on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set link security on - Invalid index - teardown complete Set link security on - Invalid index - done

Set link security off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 1 - setup complete Set link security off - Success 1 - run
Registering new settings notification Test condition added, total 1
Sending Set Link Security (0x000a)
Test condition added, total 2
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000080 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 1 - test passed Set link security off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set link security off - Success 1 - teardown complete Set link security off - Success 1 - done

Set link security off - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set link security off - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set link security off - Success 2 - setup complete Set link security off - Success 2 - run
Registering new settings notification Test condition added, total 1 Registering HCI command callback
Test condition added, total 2
Sending Set Link Security (0x000a)
Test condition added, total 3
HCI Command 0x0c20 length 1
Test condition complete, 2 left
Set Link Security (0x000a): Success (0x00) Test condition complete, 1 left
New settings 0x00000081 received Unregistering new settings notification Test condition complete, 0 left
Set link security off - Success 2 - test passed Set link security off - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set link security off - Success 2 - teardown complete Set link security off - Success 2 - done

Set SSP on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 1 - setup
Set SSP on - Success 1 - setup complete
Set SSP on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 2
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c0 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 1 - test passed
Set SSP on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Success 1 - teardown complete
Set SSP on - Success 1 - done

Set SSP on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 2 - setup complete
Set SSP on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Simple Pairing (0x000b) Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
Set Secure Simple Pairing (0x000b): Success (0x00) Test condition complete, 1 left
New settings 0x000000c1 received Unregistering new settings notification Test condition complete, 0 left
Set SSP on - Success 2 - test passed
HCI Command 0x0c52 length 241
Set SSP on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 2 - teardown complete
Set SSP on - Success 2 - done

Set SSP on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set SSP on - Success 3 - setup complete
Set SSP on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c56 length 1
Test condition complete, 2 left
HCI Command 0x0c13 length 248
HCI Command 0x0c52 length 241
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x000000c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set SSP on - Success 3 - test passed
Set SSP on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set SSP on - Success 3 - teardown complete
Set SSP on - Success 3 - done

Set SSP on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 1 - setup
Set SSP on - Invalid parameters 1 - setup complete Set SSP on - Invalid parameters 1 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 1 - test passed
Set SSP on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 1 - teardown complete Set SSP on - Invalid parameters 1 - done

Set SSP on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 2 - setup
Set SSP on - Invalid parameters 2 - setup complete Set SSP on - Invalid parameters 2 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 2 - test passed
Set SSP on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 2 - teardown complete Set SSP on - Invalid parameters 2 - done

Set SSP on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid parameters 3 - setup
Set SSP on - Invalid parameters 3 - setup complete Set SSP on - Invalid parameters 3 - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Parameters (0x0d) Test condition complete, 0 left
Set SSP on - Invalid parameters 3 - test passed
Set SSP on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid parameters 3 - teardown complete Set SSP on - Invalid parameters 3 - done

Set SSP on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set SSP on - Invalid index - setup
Set SSP on - Invalid index - setup complete
Set SSP on - Invalid index - run
Sending Set Secure Simple Pairing (0x000b)
Test condition added, total 1
Set Secure Simple Pairing (0x000b): Invalid Index (0x11) Test condition complete, 0 left
Set SSP on - Invalid index - test passed
Set SSP on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set SSP on - Invalid index - teardown complete
Set SSP on - Invalid index - done

Set Secure Connections on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 1 - setup complete Set Secure Connections on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d) Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 1 - test passed Set Secure Connections on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 1 - teardown complete Set Secure Connections on - Success 1 - done

Set Secure Connections on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Success 2 - setup complete Set Secure Connections on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d) Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received Unregistering new settings notification Test condition complete, 0 left
Set Secure Connections on - Success 2 - test passed Set Secure Connections on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Success 2 - teardown complete Set Secure Connections on - Success 2 - done

Set Secure Connections on - Invalid params 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 1 - setup complete Set Secure Connections on - Invalid params 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 1 - test passed Set Secure Connections on - Invalid params 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 1 - teardown complete Set Secure Connections on - Invalid params 1 - done

Set Secure Connections on - Invalid params 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 2 - setup complete Set Secure Connections on - Invalid params 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 2 - test passed Set Secure Connections on - Invalid params 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 2 - teardown complete Set Secure Connections on - Invalid params 2 - done

Set Secure Connections on - Invalid params 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid params 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid params 3 - setup complete Set Secure Connections on - Invalid params 3 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Secure Connections on - Invalid params 3 - test passed Set Secure Connections on - Invalid params 3 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid params 3 - teardown complete Set Secure Connections on - Invalid params 3 - done

Set Secure Connections on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Invalid index - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Invalid index - setup complete Set Secure Connections on - Invalid index - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Invalid Index (0x11) Test condition complete, 0 left
Set Secure Connections on - Invalid index - test passed Set Secure Connections on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Invalid index - teardown complete Set Secure Connections on - Invalid index - done

Set Secure Connections on - Not supported 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 1 - setup complete Set Secure Connections on - Not supported 1 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 1 - test passed Set Secure Connections on - Not supported 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 1 - teardown complete Set Secure Connections on - Not supported 1 - done

Set Secure Connections on - Not supported 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x05
    Manufacturer: 0x003f
    Supported settings: 0x000110ff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections on - Not supported 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections on - Not supported 2 - setup complete Set Secure Connections on - Not supported 2 - run
Sending Set Secure Connections (0x002d)
Test condition added, total 1
Set Secure Connections (0x002d): Not Supported (0x0c) Test condition complete, 0 left
Set Secure Connections on - Not supported 2 - test passed Set Secure Connections on - Not supported 2 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections on - Not supported 2 - teardown complete Set Secure Connections on - Not supported 2 - done

Set Secure Connections Only on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 1 - setup complete Set Secure Connections Only on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Secure Connections (0x002d)
Test condition added, total 2
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c0 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 1 - test passed Set Secure Connections Only on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 1 - teardown complete Set Secure Connections Only on - Success 1 - done

Set Secure Connections Only on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Secure Connections Only on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Secure Connections Only on - Success 2 - setup complete Set Secure Connections Only on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Secure Connections (0x002d)
Test condition added, total 3
HCI Command 0x0c7a length 1
Test condition complete, 2 left
Set Secure Connections (0x002d): Success (0x00) Test condition complete, 1 left
New settings 0x000008c1 received
Unregistering new settings notification
Test condition complete, 0 left
Set Secure Connections Only on - Success 2 - test passed Set Secure Connections Only on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Secure Connections Only on - Success 2 - teardown complete Set Secure Connections Only on - Success 2 - done

Set High Speed on - Success - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Success - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Success - done

Set High Speed on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 1 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 1 - done

Set High Speed on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 2 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 2 - done

Set High Speed on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid parameters 3 - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid parameters 3 - done

Set High Speed on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Expected bit 8 not supported
Expected supported settings: 0x0001beff != 0x0001bfff
Set High Speed on - Invalid index - pre setup failed
Index Removed callback

    Index: 0x0000

Set High Speed on - Invalid index - done

Set Low Energy on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 1 - setup
Set Low Energy on - Success 1 - setup complete
Set Low Energy on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Low Energy (0x000d)
Test condition added, total 2
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 1 - test passed
Set Low Energy on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 1 - teardown complete
Set Low Energy on - Success 1 - done

Set Low Energy on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 2 - setup complete
Set Low Energy on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Low Energy (0x000d)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
Set Low Energy (0x000d): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 2 - test passed
HCI Command 0x2008 length 32
Set Low Energy on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 2 - teardown complete
Set Low Energy on - Success 2 - done

Set Low Energy on - Success 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Success 3 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Low Energy on - Success 3 - setup complete
Set Low Energy on - Success 3 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Powered (0x0005)
Test condition added, total 3
HCI Command 0x0c6d length 2
Test condition complete, 2 left
HCI Command 0x2008 length 32
HCI Command 0x0c13 length 248
Set Powered (0x0005): Success (0x00)
Test condition complete, 1 left
New settings 0x00000281 received
Unregistering new settings notification
Test condition complete, 0 left
Set Low Energy on - Success 3 - test passed
Set Low Energy on - Success 3 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Low Energy on - Success 3 - teardown complete
Set Low Energy on - Success 3 - done

Set Low Energy on - Invalid parameters 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 1 - setup Set Low Energy on - Invalid parameters 1 - setup complete Set Low Energy on - Invalid parameters 1 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 1 - test passed Set Low Energy on - Invalid parameters 1 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 1 - teardown complete Set Low Energy on - Invalid parameters 1 - done

Set Low Energy on - Invalid parameters 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 2 - setup Set Low Energy on - Invalid parameters 2 - setup complete Set Low Energy on - Invalid parameters 2 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 2 - test passed Set Low Energy on - Invalid parameters 2 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 2 - teardown complete Set Low Energy on - Invalid parameters 2 - done

Set Low Energy on - Invalid parameters 3 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid parameters 3 - setup Set Low Energy on - Invalid parameters 3 - setup complete Set Low Energy on - Invalid parameters 3 - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Parameters (0x0d) Test condition complete, 0 left
Set Low Energy on - Invalid parameters 3 - test passed Set Low Energy on - Invalid parameters 3 - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid parameters 3 - teardown complete Set Low Energy on - Invalid parameters 3 - done

Set Low Energy on - Invalid index - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Low Energy on - Invalid index - setup Set Low Energy on - Invalid index - setup complete Set Low Energy on - Invalid index - run
Sending Set Low Energy (0x000d)
Test condition added, total 1
Set Low Energy (0x000d): Invalid Index (0x11) Test condition complete, 0 left
Set Low Energy on - Invalid index - test passed Set Low Energy on - Invalid index - teardown
Index Removed callback

    Index: 0x0000

Set Low Energy on - Invalid index - teardown complete Set Low Energy on - Invalid index - done

Set Advertising on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 1 - setup complete
Set Advertising on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000680 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 1 - test passed
Set Advertising on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 1 - teardown complete Set Advertising on - Success 1 - done

Set Advertising on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Success 2 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Success 2 - setup complete
Set Advertising on - Success 2 - run
Registering new settings notification
Test condition added, total 1
Registering HCI command callback
Test condition added, total 2
Sending Set Advertising (0x0029)
Test condition added, total 3
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Test condition complete, 2 left
Set Advertising (0x0029): Success (0x00)
Test condition complete, 1 left
New settings 0x00000681 received
Unregistering new settings notification
Test condition complete, 0 left
Set Advertising on - Success 2 - test passed
Set Advertising on - Success 2 - teardown
New settings event received
Index Removed callback

    Index: 0x0000

Set Advertising on - Success 2 - teardown complete Set Advertising on - Success 2 - done

Set Advertising on - Rejected 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Rejected 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set Advertising on - Rejected 1 - setup complete
Set Advertising on - Rejected 1 - run
Sending Set Advertising (0x0029)
Test condition added, total 1
Set Advertising (0x0029): Rejected (0x0b)
Test condition complete, 0 left
Set Advertising on - Rejected 1 - test passed
Set Advertising on - Rejected 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Rejected 1 - teardown complete Set Advertising on - Rejected 1 - done

Set Advertising on - Appearance 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Appearance 1 - setup
Initial settings completed
Setup sending Set Appearance (0x0043) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Appearance 1 - setup complete Set Advertising on - Appearance 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Appearance 1 - test passed Set Advertising on - Appearance 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Appearance 1 - teardown complete Set Advertising on - Appearance 1 - done

Set Advertising on - Local name 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Local name 1 - setup
Initial settings completed
Setup sending Set Local Name (0x000f) Test setup condition added, total 1
Test setup condition complete, 0 left
Set Advertising on - Local name 1 - setup complete Set Advertising on - Local name 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Local name 1 - test passed Set Advertising on - Local name 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Local name 1 - teardown complete Set Advertising on - Local name 1 - done

Set Advertising on - Name + Appear 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set Advertising on - Name + Appear 1 - setup
Initial settings completed
Sending setup opcode array
Setup sending Set Appearance (0x0043)
Test setup condition added, total 1
Setup sending Set Local Name (0x000f)
Test setup condition added, total 2
Test setup condition complete, 1 left
Test setup condition complete, 0 left
Set Advertising on - Name + Appear 1 - setup complete Set Advertising on - Name + Appear 1 - run
Registering HCI command callback
Test condition added, total 1
Sending Set Advertising (0x0029)
Test condition added, total 2
HCI Command 0x2009 length 32
Test condition complete, 1 left
HCI Command 0x2005 length 6
HCI Command 0x2006 length 15
HCI Command 0x200a length 1
Set Advertising (0x0029): Success (0x00) Test condition complete, 0 left
Set Advertising on - Name + Appear 1 - test passed Set Advertising on - Name + Appear 1 - teardown
Index Removed callback

    Index: 0x0000

Set Advertising on - Name + Appear 1 - teardown complete Set Advertising on - Name + Appear 1 - done

Set BR/EDR off - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR off - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR off - Success 1 - setup complete
Set BR/EDR off - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000200 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR off - Success 1 - test passed
Set BR/EDR off - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR off - Success 1 - teardown complete
Set BR/EDR off - Success 1 - done

Set BR/EDR on - Success 1 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

Set BR/EDR on - Success 1 - setup
Initial settings completed
Client set connectable: Success (0x00)
Set BR/EDR on - Success 1 - setup complete
Set BR/EDR on - Success 1 - run
Registering new settings notification
Test condition added, total 1
Sending Set BR/EDR (0x002a)
Test condition added, total 2
Set BR/EDR (0x002a): Success (0x00)
Test condition complete, 1 left
New settings 0x00000280 received
Unregistering new settings notification
Test condition complete, 0 left
Set BR/EDR on - Success 1 - test passed
Set BR/EDR on - Success 1 - teardown
Index Removed callback

    Index: 0x0000

Set BR/EDR on - Success 1 - teardown complete
Set BR/EDR on - Success 1 - done

Set BR/EDR on - Success 2 - init
Read Version callback

    Status: Success (0x00)
    Version 1.19
  Read Commands callback
    Status: Success (0x00)
  Read Index List callback
    Status: Success (0x00)
  Index Added callback
    Index: 0x0000
  Read Info callback
    Status: Success (0x00)
    Address: 00:AA:01:00:00:00
    Version: 0x09
    Manufacturer: 0x003f
    Supported settings: 0x0001beff
    Current settings: 0x00000080
    Class: 0x000000
    Name: 
    Short name: 

13,126 lines not shown · raw message

Part of this message is not shown here. View the raw message.

maintainer
#2 lore raw
In reply to Luiz Augusto von Dentz

Hi Luiz,

Quoted 83 lines

This checking the firmware build number, week and years matches and then skip the download process.

---

drivers/bluetooth/btintel.c   | 88 +++++++++++++++++++++++++++--------
drivers/bluetooth/btintel.h   |  5 +-
drivers/bluetooth/btusb.c     | 22 +++++----
drivers/bluetooth/hci_intel.c |  2 +-
4 files changed, 84 insertions(+), 33 deletions(-)
drivers/bluetooth/btintel.c +28 -15
index 88ce5f0ffc4b..bf7b910966c8 100644
@@ -24,6 +24,14 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} _packed;
+
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
 
 static int btintel_download_firmware_payload(struct hci_dev *hdev,
 					     const struct firmware *fw,
-					     u32 *boot_param, size_t offset)
+					     size_t offset)
 {
 	int err;
 	const u8 *fw_ptr;
@@ -854,20 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		/* Each SKU has a different reset parameter to use in the
-		 * HCI_Intel_Reset command and it is embedded in the firmware
-		 * data. So, instead of using static value per SKU, check
-		 * the firmware data and save it for later use.
-		 */
-		if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
-			/* The boot parameter is the first 32-bit value
-			 * and rest of 3 octets are reserved.
-			 */
-			*boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
-
-			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
-		}
-
 		frag_len += sizeof(*cmd) + cmd->plen;
 
 		/* The parameter length of the secure send command requires
@@ -896,28 +890,84 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	return err;
 }
 
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+	u32 frag_len;
+
+	fw_ptr = fw->data;
+	frag_len = 0;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */

drivers/bluetooth/btintel.c static int btintel_download_firmware_payload(struct hci_dev *hdev, · line 921

Quoted 10 lines
drivers/bluetooth/btintel.c +10 -0
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			bt_dev_dbg(hdev, "Boot Address: 0x%x\n"
+				   "Firmware Version: %u-%u.%u",
+				   le32_to_cpu(params->boot_addr),
+				   params->fw_build_num, params->fw_build_ww,
+				   params->fw_build_yy);

use two bt_dev_dbg here please.

drivers/bluetooth/btintel.c static int btintel_download_firmware_payload(struct hci_dev *hdev, · line 927

Quoted 6 lines
drivers/bluetooth/btintel.c +6 -0
+
+			if (num == params->fw_build_num &&
+			    ww == params->fw_build_ww &&
+			    yy == params->fw_build_yy)
+				return true;
+			else

The else part is not really needed here.

drivers/bluetooth/btintel.c static int btintel_download_firmware_payload(struct hci_dev *hdev, · line 929

Quoted 2 lines
drivers/bluetooth/btintel.c +2 -0
+				return false;
+		}

Maybe this is better

			/* comment goes here, true when x and false when y */
			return (num == params_foo &&
				ww = params_bar &&
				yy = params_foobar);
Quoted 100 lines
drivers/bluetooth/btintel.c +22 -5
+
+		frag_len += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
 int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
 			      const struct firmware *fw,
 			      u32 *boot_param)
 {
 	int err;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->fw_build_num, ver->fw_build_ww,
+				     ver->fw_build_yy, fw, boot_param))
+		return -EALREADY;
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
 
-	return btintel_download_firmware_payload(hdev, fw, boot_param,
-						 RSA_HEADER_LEN);
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw, u32 *boot_param,
 				     u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw, ver->min_fw_build_yy,
+				     fw, boot_param))
+		return -EALREADY;
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
@@ -947,7 +997,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		if (err)
 			return err;
 
-		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 		if (err)
 			return err;
 	} else if (hw_variant >= 0x17) {
@@ -968,7 +1018,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
@@ -978,7 +1027,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
drivers/bluetooth/btintel.h +3 -2
index 6511b091caf5..51f1f2c883b4 100644
@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
 int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
-			      u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw,
 				     u32 *boot_param, u8 hw_variant,
 				     u8 sbe_type);
drivers/bluetooth/btusb.c +1 -1
index 4266c057746e..a06e86f52da3 100644
@@ -2612,14 +2612,15 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware_newgen(hdev, fw, boot_param,
+	err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
 					       INTEL_HW_VARIANT(ver->cnvi_bt),
 					       ver->sbe_type);

drivers/bluetooth/btusb.c static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev, · line 2623

Quoted 10 lines
drivers/bluetooth/btusb.c +5 -4
 	if (err < 0) {
-		/* When FW download fails, send Intel Reset to retry
-		 * FW download.
-		 */
-		btintel_reset_to_bootloader(hdev);
+		if (err != -EALREADY)
+			/* When FW download fails, send Intel Reset to retry
+			 * FW download.
+			 */
+			btintel_reset_to_bootloader(hdev);

Need another comment about the EALREADY case and here { } around it for readability.

Quoted 9 lines
drivers/bluetooth/btusb.c +1 -1
 		goto done;
 	}
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
@@ -2806,12 +2807,13 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, boot_param);
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);

drivers/bluetooth/btusb.c static int btusb_intel_download_firmware(struct hci_dev *hdev, · line 2816

Quoted 10 lines
drivers/bluetooth/btusb.c +5 -4
 	if (err < 0) {
-		/* When FW download fails, send Intel Reset to retry
-		 * FW download.
-		 */
-		btintel_reset_to_bootloader(hdev);
+		if (err != -EALREADY)
+			/* When FW download fails, send Intel Reset to retry
+			 * FW download.
+			 */
+			btintel_reset_to_bootloader(hdev);

See comment above.

Quoted 8 lines
drivers/bluetooth/btusb.c +0 -0
 		goto done;
 	}
 	set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
drivers/bluetooth/hci_intel.c +0 -0
index b20a40fab83e..050fae33dab8 100644

drivers/bluetooth/hci_intel.c static int intel_setup(struct hci_uart *hu) · line 740

Quoted 7 lines
drivers/bluetooth/hci_intel.c +1 -1
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
 	set_bit(STATE_DOWNLOADING, &intel->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
 	if (err < 0)
 		goto done;

Regards

Marcel