Skip to contentSkip to conversation

mt76: mt7921: fix mgmt frame using unexpected bitrate

PATCH In review [email protected] 2 participants 3 messages Jul 8, 2021

Subsystems (2)
lore
Share & tools
lore

[email protected]

author reviewer
#0 lore raw

PATCH 1/2 mt76: mt7921: fix mgmt frame using unexpected bitrate

From: Sean Wang <[email protected]>

Fix the current driver mgmt frame is not respecting the basic rates field provided by the AP and then unconditionally is using the lowest (1 or 6 Mbps) rate.

For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps, mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send.

The patch also fixed up the hw_value in ieee80211_rate for MT7921 hardware.

Fixes 163f4d22c118 ("mt76: mt7921: add MAC support")
---
 .../net/wireless/mediatek/mt76/mt7921/init.c  | 19 +++++++++++++++--
 .../net/wireless/mediatek/mt76/mt7921/mac.c   | 21 +++++++++++++++----
 .../wireless/mediatek/mt76/mt7921/mt7921.h    | 14 +++++++++++++
 3 files changed, 48 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/init.c +17 -2
index a9ce10b98827..ee57f268c29c 100644
@@ -24,6 +24,21 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
+struct ieee80211_rate mt7921_rates[] = {
+	MT7921_CCK_RATE(0, 10),
+	MT7921_CCK_RATE(1, 20),
+	MT7921_CCK_RATE(2, 55),
+	MT7921_CCK_RATE(3, 110),
+	MT7921_OFDM_RATE(11, 60),
+	MT7921_OFDM_RATE(15, 90),
+	MT7921_OFDM_RATE(10, 120),
+	MT7921_OFDM_RATE(14, 180),
+	MT7921_OFDM_RATE(9,  240),
+	MT7921_OFDM_RATE(13, 360),
+	MT7921_OFDM_RATE(8,  480),
+	MT7921_OFDM_RATE(12, 540),
+};
+
 static void
 mt7921_regd_notifier(struct wiphy *wiphy,
 		     struct regulatory_request *request)
@@ -227,8 +242,8 @@ int mt7921_register_device(struct mt7921_dev *dev)
 	mt76_set_stream_caps(&dev->mphy, true);
 	mt7921_set_stream_he_caps(&dev->phy);
 
-	ret = mt76_register_device(&dev->mt76, true, mt76_rates,
-				   ARRAY_SIZE(mt76_rates));
+	ret = mt76_register_device(&dev->mt76, true, mt7921_rates,
+				   ARRAY_SIZE(mt7921_rates));
 	if (ret)
 		return ret;
 
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +17 -4
index 7fe2e3a50428..76985a6b3be5 100644
@@ -749,6 +749,22 @@ static void mt7921_update_txs(struct mt76_wcid *wcid, __le32 *txwi)
 			       FIELD_PREP(MT_TXD5_PID, pid));
 }
 
+static u16
+mt7921_default_basic_rates(struct mt7921_dev *dev, struct ieee80211_vif *vif)
+{
+	struct mt76_phy *mphy = &dev->mphy;
+	struct ieee80211_rate *rate;
+	int i, offset = 0;
+
+	if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
+		offset = 4;
+
+	i = ffs(vif->bss_conf.basic_rates) - 1;
+	rate = &mt7921_rates[offset + i];
+
+	return rate->hw_value;
+}
+
 void mt7921_mac_write_txwi(struct mt7921_dev *dev, __le32 *txwi,
 			   struct sk_buff *skb, struct mt76_wcid *wcid,
 			   struct ieee80211_key_conf *key, bool beacon)
@@ -815,10 +831,7 @@ void mt7921_mac_write_txwi(struct mt7921_dev *dev, __le32 *txwi,
 		/* hardware won't add HTC for mgmt/ctrl frame */
 		txwi[2] |= cpu_to_le32(MT_TXD2_HTC_VLD);
 
-		if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
-			rate = MT7921_5G_RATE_DEFAULT;
-		else
-			rate = MT7921_2G_RATE_DEFAULT;
+		rate = mt7921_default_basic_rates(dev, vif);
 
 		val = MT_TXD6_FIXED_BW |
 		      FIELD_PREP(MT_TXD6_TX_RATE, rate);
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +14 -0
index 2d8bd6bfc820..6ef69f5e8f42 100644
@@ -45,6 +45,19 @@
 #define MT7921_SKU_MAX_DELTA_IDX	MT7921_SKU_RATE_NUM
 #define MT7921_SKU_TABLE_SIZE		(MT7921_SKU_RATE_NUM + 1)
 
+#define MT7921_CCK_RATE(_idx, _rate) {				\
+	.bitrate = _rate,					\
+	.flags = IEEE80211_RATE_SHORT_PREAMBLE,			\
+	.hw_value = (MT_PHY_TYPE_CCK << 6) | (_idx),		\
+	.hw_value_short = (MT_PHY_TYPE_CCK << 6) | (4 + _idx),	\
+}
+
+#define MT7921_OFDM_RATE(_idx, _rate) {				\
+	.bitrate = _rate,					\
+	.hw_value = (MT_PHY_TYPE_OFDM << 6) | (_idx),		\
+	.hw_value_short = (MT_PHY_TYPE_OFDM << 6) | (_idx),	\
+}
+
 #define to_rssi(field, rxv)		((FIELD_GET(field, rxv) - 220) / 2)
 #define to_rcpi(rssi)			(2 * (rssi) + 220)
 
@@ -241,6 +254,7 @@ static inline u8 mt7921_lmac_mapping(struct mt7921_dev *dev, u8 ac)
 
 extern const struct ieee80211_ops mt7921_ops;
 extern struct pci_driver mt7921_pci_driver;
+extern struct ieee80211_rate mt7921_rates[12];
 
 u32 mt7921_reg_map(struct mt7921_dev *dev, u32 addr);
 
Signature · 1 line
2.25.1
author reviewer
#1 lore raw

PATCH 2/2 mt76: connac: fix mt76_connac_gtk_rekey_tlv usage

From: Leon Yen <[email protected]>

The mistaken structure is introduced since we added the GTK rekey offload to mt7663. The patch fixes mt76_connac_gtk_rekey_tlv structure according to the MT7663 and MT7921 firmware we have submitted into linux-firmware.git.

Fixes b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
---
 drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h +3 -3
index 1c73beb22677..4bcd728ff97c 100644
@@ -844,14 +844,14 @@ struct mt76_connac_gtk_rekey_tlv {
 			* 2: rekey update
 			*/
 	u8 keyid;
-	u8 pad[2];
+	u8 option; /* 1: rekey data update without enabling offload */
+	u8 pad[1];
 	__le32 proto; /* WPA-RSN-WAPI-OPSN */
 	__le32 pairwise_cipher;
 	__le32 group_cipher;
 	__le32 key_mgmt; /* NONE-PSK-IEEE802.1X */
 	__le32 mgmt_group_cipher;
-	u8 option; /* 1: rekey data update without enabling offload */
-	u8 reserverd[3];
+	u8 reserverd[4];
 } __packed;
 
 #define MT76_CONNAC_WOW_MASK_MAX_LEN			16
Signature · 1 line
2.25.1
maintainer
#2 lore raw
In reply to [email protected]
Quoted 50 lines · On Thu, 2021-07-08 at 12:29 +0800, [email protected] wrote:

From: Sean Wang <[email protected]>

Fix the current driver mgmt frame is not respecting the basic rates field
provided by the AP and then unconditionally is using the lowest (1 or 6
Mbps) rate.

For example, if the AP only supported basic rate {24, 36, 48, 54} Mbps,
mt7921 cannot send mgmt frame with the rate not in the group. So, instead, we pick up the lowest basic rate the AP can support to send.

The patch also fixed up the hw_value in ieee80211_rate for MT7921 hardware.

Fixes 163f4d22c118 ("mt76: mt7921: add MAC support")
---
 .../net/wireless/mediatek/mt76/mt7921/init.c  | 19 +++++++++++++++--
 .../net/wireless/mediatek/mt76/mt7921/mac.c   | 21 +++++++++++++++
----
 .../wireless/mediatek/mt76/mt7921/mt7921.h    | 14 +++++++++++++
 3 files changed, 48 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +12 -4
+	int i, offset = 0;
+
+	if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
+		offset = 4;
+
+	i = ffs(vif->bss_conf.basic_rates) - 1;
+	rate = &mt7921_rates[offset + i];
+
+	return rate->hw_value;
+}
+
 void mt7921_mac_write_txwi(struct mt7921_dev *dev, __le32 *txwi,
 			   struct sk_buff *skb, struct mt76_wcid *wcid,
 			   struct ieee80211_key_conf *key, bool beacon)
@@ -815,10 +831,7 @@ void mt7921_mac_write_txwi(struct mt7921_dev
 *dev, __le32 *txwi,
 		/* hardware won't add HTC for mgmt/ctrl frame */
 		txwi[2] |= cpu_to_le32(MT_TXD2_HTC_VLD);
 
-		if (mphy->chandef.chan->band == NL80211_BAND_5GHZ)
-			rate = MT7921_5G_RATE_DEFAULT;
-		else
-			rate = MT7921_2G_RATE_DEFAULT;
+		rate = mt7921_default_basic_rates(dev, vif);

....

Quoted 10 lines

\

drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +7 -0
+	.bitrate = _rate,					\
+	.flags = IEEE80211_RATE_SHORT_PREAMBLE,			\
+	.hw_value = (MT_PHY_TYPE_CCK << 6) | (_idx),		\
+	.hw_value_short = (MT_PHY_TYPE_CCK << 6) | (4 + _idx),	\
+}
+
+#define MT7921_OFDM_RATE(_idx, _rate) {				

\

drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h line 60

Quoted 5 lines
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +5 -0
+	.bitrate = _rate,					\
+	.hw_value = (MT_PHY_TYPE_OFDM << 6) | (_idx),		\
+	.hw_value_short = (MT_PHY_TYPE_OFDM << 6) | (_idx),	\
+}
+

Nice catching. I shifted the wrong offset while bringing up mt7915, but I used the correct offset in TxD resulting in this mt7921 issue. Can you do me a favor to fix the offset of mt7915 as well?

Ryder