Skip to contentSkip to conversation

{11/17} - via-velocity-dont-oops-on-mtu-change-2 - series for stable kernel #2

2.6.22.y Oliver Pinter (Pintér Olivér) 1 participant 2 messages Feb 2, 2008 – Feb 6, 2008 Network drivers

lore
Share & tools
lore
#0 lore raw

mainline: 48f6b053613b62fed7a2fe3255e5568260a8d615

Signature · 2 lines
Thanks,
Oliver

Date: Wed, 28 Nov 2007 22:20:16 +0000 (-0800)
Subject: via-velocity: don't oops on MTU change (resend)
Patch-mainline: v2.6.24-rc4
References: 341537

via-velocity: don't oops on MTU change (resend)

The VIA veloicty driver needs the following to allow changing MTU when down. The buffer size needs to be computed when device is brought up, not when device is initialized. This also fixes a bug where the buffer size was computed differently on change_mtu versus initial setting.

---
 drivers/net/via-velocity.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/net/via-velocity.c +3 -8
@@ -1075,6 +1075,9 @@ static int velocity_init_rd_ring(struct 
 	int ret = -ENOMEM;
 	unsigned int rsize = sizeof(struct velocity_rd_info) *
 					vptr->options.numrx;
+	int mtu = vptr->dev->mtu;
+
+	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 
 	vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
 	if(vptr->rd_info == NULL)
@@ -1733,8 +1736,6 @@ static int velocity_open(struct net_devi
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
-
 	ret = velocity_init_rings(vptr);
 	if (ret < 0)
 		goto out;
@@ -1813,12 +1814,6 @@ static int velocity_change_mtu(struct ne
 		velocity_free_rd_ring(vptr);
 
 		dev->mtu = new_mtu;
-		if (new_mtu > 8192)
-			vptr->rx_buf_sz = 9 * 1024;
-		else if (new_mtu > 4096)
-			vptr->rx_buf_sz = 8192;
-		else
-			vptr->rx_buf_sz = 4 * 1024;
 
 		ret = velocity_init_rd_ring(vptr);
 		if (ret < 0)
author Acked-by Jeff Mahoney
#1 lore raw

From: Stephen Hemminger <[email protected]>
Date: Wed, 28 Nov 2007 22:20:16 +0000 (-0800)
Subject: via-velocity: don't oops on MTU change (resend)
Patch-mainline: v2.6.24-rc4
References: 341537

via-velocity: don't oops on MTU change (resend)

The VIA veloicty driver needs the following to allow changing MTU when down. The buffer size needs to be computed when device is brought up, not when device is initialized. This also fixes a bug where the buffer size was computed differently on change_mtu versus initial setting.

---
 drivers/net/via-velocity.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
drivers/net/via-velocity.c +3 -8
@@ -1075,6 +1075,9 @@ static int velocity_init_rd_ring(struct
 	int ret = -ENOMEM;
 	unsigned int rsize = sizeof(struct velocity_rd_info) *
 					vptr->options.numrx;
+	int mtu = vptr->dev->mtu;
+
+	vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
 
 	vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
 	if(vptr->rd_info == NULL)
@@ -1733,8 +1736,6 @@ static int velocity_open(struct net_devi
 	struct velocity_info *vptr = netdev_priv(dev);
 	int ret;
 
-	vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
-
 	ret = velocity_init_rings(vptr);
 	if (ret < 0)
 		goto out;
@@ -1813,12 +1814,6 @@ static int velocity_change_mtu(struct ne
 		velocity_free_rd_ring(vptr);
 
 		dev->mtu = new_mtu;
-		if (new_mtu > 8192)
-			vptr->rx_buf_sz = 9 * 1024;
-		else if (new_mtu > 4096)
-			vptr->rx_buf_sz = 8192;
-		else
-			vptr->rx_buf_sz = 4 * 1024;
 
 		ret = velocity_init_rd_ring(vptr);
 		if (ret < 0)
Quoted 7 lines · Oliver Pinter (Pintér Olivér)

mainline: 48f6b053613b62fed7a2fe3255e5568260a8d615

--
Thanks,
Oliver

Signature · 2 lines
Thanks,
Oliver