Skip to contentSkip to conversation

Instruction Cache Parity Error / 2.6.10 on MPC8540

DISCUSSION Clemens Koller 2 participants 3 messages Jan 20, 2005

lore
Share & tools
lore
#0 lore raw

Hello,

Well, I made good progress with Kernel 2.6.10 on my target (PM854, Microsys) which is very similar to the MPC8540_ads configuration. But now, after working for several minutes, I ran into the following
Oops:

-----8<-------------------------------------------------------------

root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
Caused by (from MCSR=40000000): Instruction Cache Parity Error
Oops: machine check, sig: 7 [#1]
PREEMPT
NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202    Not tainted
MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0233720[0] 'swapper' THREAD: c0262000
Last syscall: 120
GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351 00000000
GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700 007FFF93
GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00 C02B5C78
GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000 C0263E90
NIP [c00054f8] __switch_to+0x14/0x9c
LR [c01f8348] schedule+0x318/0x704
Call trace:
 [c01f8348] schedule+0x318/0x704
 [c00026c8] resume_kernel+0x38/0x5c
 [c00039f8] cpu_idle+0x28/0x40
 [c0001afc] rest_init+0x28/0x38
 [c0264804] start_kernel+0x16c/0x1a4
 [c0000364] skpinv+0x294/0x2d0
Kernel panic - not syncing: Attempted to kill the idle task!
 <0>Rebooting in 180 seconds..
-----8<-------------------------------------------------------------

Does this look familiar to anybody? Any ideas where to start debugging?

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

#1 lore raw

Clemens,

I dont think there is really and debug to do with this. If this is=20 happening consistently it suppose to be an faulty part. What rev of=20 the silicon do you have (PVR, SVR)?

- kumar

Quoted 7 lines · Clemens Koller

Hello,

Well, I made good progress with Kernel 2.6.10 on my target (PM854,
Microsys) which is very similar to the MPC8540_ads configuration. But now, after working for several minutes, I ran into the following Oops:

Quoted 6 lines

-----8<-------------------------------------------------------------

 root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
 Caused by (from MCSR=3D40000000): Instruction Cache Parity Error
 Oops: machine check, sig: 7 [#1]
 PREEMPT
 NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202=A0=A0=

=A0=20

Quoted 46 lines

Not
tainted
MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK =3D c0233720[0] 'swapper' THREAD: c0262000
Last syscall: 120
GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351
00000000
GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700
007FFF93
GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00
C02B5C78
GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000
C0263E90
NIP [c00054f8] __switch_to+0x14/0x9c
LR [c01f8348] schedule+0x318/0x704

Call trace:
 =A0 [c01f8348] schedule+0x318/0x704
=A0 [c00026c8] resume_kernel+0x38/0x5c
=A0 [c00039f8] cpu_idle+0x28/0x40
=A0 [c0001afc] rest_init+0x28/0x38
=A0 [c0264804] start_kernel+0x16c/0x1a4
=A0 [c0000364] skpinv+0x294/0x2d0
Kernel panic - not syncing: Attempted to kill the idle task!
 =A0 <0>Rebooting in 180 seconds..
 -----8<-------------------------------------------------------------

Does this look familiar to anybody? Any ideas where to start
debugging?

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

#2 lore raw

Hello, Kumar!

Thank you again for your help...

The inscription of the CPU says:
PPC8540 PX833LB
2L71V MSIA
QEAD0412
(Yes, there is a heatsink on it ;-)

root@PM854:/cdrom/crux/base$ cat /proc/cpuinfo
processor       : 0
cpu             : e500
revision        : 2.0 (pvr 8020 0020)
bogomips        : 823.29
Vendor          : Freescale Semiconductor
Machine         : mpc8540ads
clock           : 825MHz
PVR             : 0x80200020
SVR             : 0x80300020
PLL setting     : 0x5
Memory          : 256 MB

I hope that this is current...
Where can I find more information about the SVR? (I had a look to the Errata Sheets... but there is no overview of the different silicons.)

Up to now, the Panic didn't appear again - I didn't change anything yet...
I just try to setup a new system (CRUX) on the attached hdd.

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

Quoted 69 lines · Kumar Gala

Clemens,

I dont think there is really and debug to do with this. If this is happening consistently it suppose to be an faulty part. What rev of the silicon do you have (PVR, SVR)?

- kumar

Quoted 58 lines · Clemens Koller

Hello,

Well, I made good progress with Kernel 2.6.10 on my target (PM854,
Microsys) which is very similar to the MPC8540_ads configuration. But now, after working for several minutes, I ran into the following Oops:

-----8<-------------------------------------------------------------

 root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
 Caused by (from MCSR=40000000): Instruction Cache Parity Error
 Oops: machine check, sig: 7 [#1]
 PREEMPT
 NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202    Not
tainted
 MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
 TASK = c0233720[0] 'swapper' THREAD: c0262000
 Last syscall: 120
 GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351
00000000
 GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700
007FFF93
 GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00
C02B5C78
 GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000
C0263E90
 NIP [c00054f8] __switch_to+0x14/0x9c
LR [c01f8348] schedule+0x318/0x704
Call trace:
   [c01f8348] schedule+0x318/0x704
  [c00026c8] resume_kernel+0x38/0x5c
  [c00039f8] cpu_idle+0x28/0x40
  [c0001afc] rest_init+0x28/0x38
  [c0264804] start_kernel+0x16c/0x1a4
  [c0000364] skpinv+0x294/0x2d0
Kernel panic - not syncing: Attempted to kill the idle task!
   <0>Rebooting in 180 seconds..
 -----8<-------------------------------------------------------------

Does this look familiar to anybody? Any ideas where to start
debugging?

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded