Skip to contentSkip to conversation

IIO for PCIe-DMA ADC

DISCUSSION Krzysztof Sywula 2 participants 4 messages Jul 24, 2014 – Jul 28, 2014 IIO

lore
Share & tools
lore
#0 lore raw

Hi there, I’m designing a PCIe driver for DMA enabled ADC. Is IIO handling such a combo? I'm based on kernel 3.8.7.

Website:
http://wiki.analog.com/software/linux/docs/iio/iio
says "However typical DMA operated devices such as ones connected to a high speed synchronous serial (McBSP, SPORT) or high speed synchronous parallel (EPI, PPI) or FPGA peripherals are also subject to this subsystem."

which is not clear enough for me to answer that question.

Thanks,
Krzysztof Sywula

#1 lore raw
Quoted 11 lines · Krzysztof Sywula

Hi there, I’m designing a PCIe driver for DMA enabled ADC. Is IIO handling such a combo? I'm based on kernel 3.8.7.

Website:
http://wiki.analog.com/software/linux/docs/iio/iio
says "However typical DMA operated devices such as ones connected to a high speed synchronous serial (McBSP, SPORT) or high speed synchronous parallel (EPI, PPI) or FPGA peripherals are also subject to this subsystem."

which is not clear enough for me to answer that question.

Hi,

The current upstream version of IIO does not have built-in support for DMA, but you can always create your custom buffer implementation that handles the DMA.

There is a out of tree generic DMA[0] and DMAengine[1] support for IIO. This is both scheduled for mainline submission, but obviously will not be available in a 3.8.7 kernel.

- Lars

[0] https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmabuf.c
[1] https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmaengine.c

#2 lore raw

Lars, I have few more questions, would love if you could answer.
- ADC I have uses max 4KHz sampling frequency, SoC CPU is 533MHz; will IIO cope?
- are there any other ADCs in IIO framework that use your DMA-extension?
- I would like to use dw_dmac DMA driver, I hope both, IIO and your DMA-extension will honour that
- what is the status of upstreaming DMA-extension? Are you commited to any dates?
- is there any out of the box set of tests for IIO/DMA-extension?

Thanks,
Krzysztof Sywula

Quoted 36 lines · Krzysztof Sywula
Quoted 4 lines

Hi there, I’m designing a PCIe driver for DMA enabled ADC. Is IIO handling
such a combo? I'm based on kernel 3.8.7.

Quoted 8 lines

Website:
http://wiki.analog.com/software/linux/docs/iio/iio
says "However typical DMA operated devices such as ones connected to a high speed synchronous serial (McBSP, SPORT) or high speed synchronous parallel (EPI, PPI) or FPGA peripherals are also subject to this subsystem."

which is not clear enough for me to answer that question.

Hi,

The current upstream version of IIO does not have built-in support for DMA,
but you can always create your custom buffer implementation that handles the
DMA.

There is a out of tree generic DMA[0] and DMAengine[1] support for IIO. This
is both scheduled for mainline submission, but obviously will not be available in a 3.8.7 kernel.

- Lars

[0]
https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmabuf.c
[1]
https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmaengine.c

#3 lore raw
Quoted 3 lines · Krzysztof Sywula

Lars, I have few more questions, would love if you could answer.
- ADC I have uses max 4KHz sampling frequency, SoC CPU is 533MHz; will IIO cope?

That's more of a hardware issue and less of a IIO framework issue. But I think 4kHz is something that's even without DMA possible to archive without problems.

Quoted 1 line

- are there any other ADCs in IIO framework that use your DMA-extension?

Not at this point.

Quoted 2 lines

- I would like to use dw_dmac DMA driver, I hope both, IIO and your DMA-extension will honour that

If the dw_dmac driver is compliant with the DMAengine API it will work out of the box.

Quoted 2 lines

- what is the status of upstreaming DMA-extension? Are you commited to any dates?

soon ;) The plan is to at least send the kernel parts after the next merge window has closed.

Quoted 1 line

- is there any out of the box set of tests for IIO/DMA-extension?

The userspace API is backwards compatible so you can use the same tools that can be used to test other IIO applications.

- Lars

Quoted 46 lines

Thanks,
Krzysztof Sywula

Quoted 28 lines · Krzysztof Sywula
Quoted 4 lines

Hi there, I’m designing a PCIe driver for DMA enabled ADC. Is IIO handling
such a combo? I'm based on kernel 3.8.7.

Quoted 8 lines

Website:
http://wiki.analog.com/software/linux/docs/iio/iio
says "However typical DMA operated devices such as ones connected to a high speed synchronous serial (McBSP, SPORT) or high speed synchronous parallel (EPI, PPI) or FPGA peripherals are also subject to this subsystem."

which is not clear enough for me to answer that question.

Hi,

The current upstream version of IIO does not have built-in support for DMA,
but you can always create your custom buffer implementation that handles the
DMA.

There is a out of tree generic DMA[0] and DMAengine[1] support for IIO. This
is both scheduled for mainline submission, but obviously will not be available in a 3.8.7 kernel.

Quoted 8 lines

- Lars

[0]
https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmabuf.c
[1]
https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/iio/industrialio-dmaengine.c

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html