Skip to contentSkip to conversation

Bring up internal eMMC on Samsung Galaxy A8 (2018)

PATCH Applied David Virag 3 participants 19 messages Jun 1, 2022 – Jun 20, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Bring up internal eMMC on Samsung Galaxy A8 (2018)

This set adds support to the internal eMMC storage found on the Samsung Galaxy A8 (2018) (jackpotlte). It seems to work reliably for reads and writes. postmarketOS is able to boot off of it.

The original kernel from samsung sets pinctrl options at runtime changing pin-drv levels automatically. Without this code, mmc seems to work the best with the lv3 setting on jackpotlte.

David Virag (5):
dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS
dt-bindings: clock: Add indices for Exynos7885 TREX clocks
clk: samsung: exynos7885: Implement CMU_FSYS domain
clk: samsung: exynos7885: Add TREX clocks
arm64: dts: exynos: Add internal eMMC support to jackpotlte

 .../clock/samsung,exynos7885-clock.yaml       |  27 +++
 .../boot/dts/exynos/exynos7885-jackpotlte.dts |  20 ++
 arch/arm64/boot/dts/exynos/exynos7885.dtsi    |  32 +++
 drivers/clk/samsung/clk-exynos7885.c          | 207 +++++++++++++++++-
 include/dt-bindings/clock/exynos7885.h        |  54 ++++-
 5 files changed, 324 insertions(+), 16 deletions(-)
Signature · 1 line
2.36.1
#1 lore raw

PATCH 1/5 dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS

CMU_FSYS clock domain provides clocks for MMC (MMC_CARD, MMC_EMBD, MMC_SDIO), and USB30DRD.

Add clock indices and bindings documentation for CMU_FSYS domain.

---
 .../clock/samsung,exynos7885-clock.yaml       | 27 ++++++++++++++++
 include/dt-bindings/clock/exynos7885.h        | 31 ++++++++++++++++++-
 2 files changed, 57 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml +27 -0
index 5073e569a47f..006d33a9e0f1 100644
@@ -33,6 +33,7 @@ properties:
     enum:
       - samsung,exynos7885-cmu-top
       - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
       - samsung,exynos7885-cmu-peri
 
   clocks:
@@ -88,6 +89,32 @@ allOf:
             - const: dout_core_cci
             - const: dout_core_g3d
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
   - if:
       properties:
         compatible:
include/dt-bindings/clock/exynos7885.h +30 -1
index 1f8701691d62..d2e1483f93e4 100644
@@ -54,7 +54,22 @@
 #define CLK_GOUT_PERI_USI0		43
 #define CLK_GOUT_PERI_USI1		44
 #define CLK_GOUT_PERI_USI2		45
-#define TOP_NR_CLK			46
+#define CLK_MOUT_FSYS_BUS		46
+#define CLK_MOUT_FSYS_MMC_CARD		47
+#define CLK_MOUT_FSYS_MMC_EMBD		48
+#define CLK_MOUT_FSYS_MMC_SDIO		49
+#define CLK_MOUT_FSYS_USB30DRD		50
+#define CLK_DOUT_FSYS_BUS		51
+#define CLK_DOUT_FSYS_MMC_CARD		52
+#define CLK_DOUT_FSYS_MMC_EMBD		53
+#define CLK_DOUT_FSYS_MMC_SDIO		54
+#define CLK_DOUT_FSYS_USB30DRD		55
+#define CLK_GOUT_FSYS_BUS		56
+#define CLK_GOUT_FSYS_MMC_CARD		57
+#define CLK_GOUT_FSYS_MMC_EMBD		58
+#define CLK_GOUT_FSYS_MMC_SDIO		59
+#define CLK_GOUT_FSYS_USB30DRD		60
+#define TOP_NR_CLK			61
 
 /* CMU_CORE */
 #define CLK_MOUT_CORE_BUS_USER		1
@@ -112,4 +127,18 @@
 #define CLK_GOUT_WDT1_PCLK		43
 #define PERI_NR_CLK			44
 
+/* CMU_FSYS */
+#define CLK_MOUT_FSYS_BUS_USER		1
+#define CLK_MOUT_FSYS_MMC_CARD_USER	2
+#define CLK_MOUT_FSYS_MMC_EMBD_USER	3
+#define CLK_MOUT_FSYS_MMC_SDIO_USER	4
+#define CLK_MOUT_FSYS_USB30DRD_USER	4
+#define CLK_GOUT_MMC_CARD_ACLK		5
+#define CLK_GOUT_MMC_CARD_SDCLKIN	6
+#define CLK_GOUT_MMC_EMBD_ACLK		7
+#define CLK_GOUT_MMC_EMBD_SDCLKIN	8
+#define CLK_GOUT_MMC_SDIO_ACLK		9
+#define CLK_GOUT_MMC_SDIO_SDCLKIN	10
+#define FSYS_NR_CLK			11
+
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_7885_H */
Signature · 1 line
2.36.1
#3 lore raw

Re: [PATCH 1/5] dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS

In reply to David Virag
Quoted 9 lines · David Virag

CMU_FSYS clock domain provides clocks for MMC (MMC_CARD, MMC_EMBD, MMC_SDIO), and USB30DRD.

Add clock indices and bindings documentation for CMU_FSYS domain.

---
 .../clock/samsung,exynos7885-clock.yaml       | 27 ++++++++++++++++
 include/dt-bindings/clock/exynos7885.h        | 31 ++++++++++++++++++-

It seems the clock IDs from bindings are used by both driver and DTS. Sylwester, can I take them to Samsung Soc and send you a pull request?

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#4 lore raw

Re: [PATCH 1/5] dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS

Quoted 6 lines · Krzysztof Kozlowski
Quoted 5 lines · David Virag

CMU_FSYS clock domain provides clocks for MMC (MMC_CARD, MMC_EMBD, MMC_SDIO), and USB30DRD.

Add clock indices and bindings documentation for CMU_FSYS domain.

Quoted 7 lines
Quoted 4 lines
---
 .../clock/samsung,exynos7885-clock.yaml       | 27 ++++++++++++++++
 include/dt-bindings/clock/exynos7885.h        | 31 ++++++++++++++++++-

It seems the clock IDs from bindings are used by both driver and DTS. Sylwester, can I take them to Samsung Soc and send you a pull request?

Sure, let's do it that way.

Signature · 2 lines
Regards,
Sylwester
#6 lore raw

Re: (subset) [PATCH 1/5] dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS

In reply to David Virag
Quoted 6 lines · David Virag

CMU_FSYS clock domain provides clocks for MMC (MMC_CARD, MMC_EMBD, MMC_SDIO), and USB30DRD.

Add clock indices and bindings documentation for CMU_FSYS domain.

Applied, thanks!

[1/5] dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS

      https://git.kernel.org/krzk/linux/c/cd268e309c29e9a8b15a47f684d848c1d57fe150

Best regards,

Signature · 1 line
Krzysztof Kozlowski <[email protected]>
#7 lore raw

PATCH 2/5 dt-bindings: clock: Add indices for Exynos7885 TREX clocks

In reply to David Virag

TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic Shaper) inside the Exynos7885 SoC, and are needed for the SoC to function correctly.

Add indices for these clocks.

---
 include/dt-bindings/clock/exynos7885.h | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)
include/dt-bindings/clock/exynos7885.h +15 -8
index d2e1483f93e4..8256e7430b63 100644
@@ -72,14 +72,21 @@
 #define TOP_NR_CLK			61
 
 /* CMU_CORE */
-#define CLK_MOUT_CORE_BUS_USER		1
-#define CLK_MOUT_CORE_CCI_USER		2
-#define CLK_MOUT_CORE_G3D_USER		3
-#define CLK_MOUT_CORE_GIC		4
-#define CLK_DOUT_CORE_BUSP		5
-#define CLK_GOUT_CCI_ACLK		6
-#define CLK_GOUT_GIC400_CLK		7
-#define CORE_NR_CLK			8
+#define CLK_MOUT_CORE_BUS_USER			1
+#define CLK_MOUT_CORE_CCI_USER			2
+#define CLK_MOUT_CORE_G3D_USER			3
+#define CLK_MOUT_CORE_GIC			4
+#define CLK_DOUT_CORE_BUSP			5
+#define CLK_GOUT_CCI_ACLK			6
+#define CLK_GOUT_GIC400_CLK			7
+#define CLK_GOUT_TREX_D_CORE_ACLK		8
+#define CLK_GOUT_TREX_D_CORE_GCLK		9
+#define CLK_GOUT_TREX_D_CORE_PCLK		10
+#define CLK_GOUT_TREX_P_CORE_ACLK_P_CORE	11
+#define CLK_GOUT_TREX_P_CORE_CCLK_P_CORE	12
+#define CLK_GOUT_TREX_P_CORE_PCLK		13
+#define CLK_GOUT_TREX_P_CORE_PCLK_P_CORE	14
+#define CORE_NR_CLK				15
 
 /* CMU_PERI */
 #define CLK_MOUT_PERI_BUS_USER		1
Signature · 1 line
2.36.1
Reviewed-by on v1 2/5
#8 lore raw

Re: [PATCH 2/5] dt-bindings: clock: Add indices for Exynos7885 TREX clocks

Quoted 6 lines · David Virag

TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic Shaper) inside the Exynos7885 SoC, and are needed for the SoC to function correctly.

Add indices for these clocks.

Best regards,
Krzysztof

#9 lore raw

Re: (subset) [PATCH 2/5] dt-bindings: clock: Add indices for Exynos7885 TREX clocks

In reply to David Virag
Quoted 8 lines · David Virag

TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic Shaper) inside the Exynos7885 SoC, and are needed for the SoC to function correctly.

Add indices for these clocks.

[...]

Applied, thanks!

[2/5] dt-bindings: clock: Add indices for Exynos7885 TREX clocks

      https://git.kernel.org/krzk/linux/c/e756e932a3a16418cd8bad757b028bfb337b4a51

Best regards,

Signature · 1 line
Krzysztof Kozlowski <[email protected]>
#10 lore raw

PATCH 3/5 clk: samsung: exynos7885: Implement CMU_FSYS domain

In reply to David Virag

CMU_FSYS clock domain provides clocks for FSYS IP-core providing clocks for all MMC devices on Exynos7885, and USB30DRD.

This patch includes:
- Bus clocks in CMU_TOP needed for CMU_FSYS
- All clocks in CMU_FSYS needed for MMC devices

---
 drivers/clk/samsung/clk-exynos7885.c | 158 +++++++++++++++++++++++++++
 1 file changed, 158 insertions(+)
drivers/clk/samsung/clk-exynos7885.c +158 -0
index 368c50badd15..302937025409 100644
@@ -27,6 +27,11 @@
 #define CLK_CON_MUX_MUX_CLKCMU_CORE_BUS		0x1014
 #define CLK_CON_MUX_MUX_CLKCMU_CORE_CCI		0x1018
 #define CLK_CON_MUX_MUX_CLKCMU_CORE_G3D		0x101c
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS_BUS		0x1028
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_CARD	0x102c
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_EMBD	0x1030
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_SDIO	0x1034
+#define CLK_CON_MUX_MUX_CLKCMU_FSYS_USB30DRD	0x1038
 #define CLK_CON_MUX_MUX_CLKCMU_PERI_BUS		0x1058
 #define CLK_CON_MUX_MUX_CLKCMU_PERI_SPI0	0x105c
 #define CLK_CON_MUX_MUX_CLKCMU_PERI_SPI1	0x1060
@@ -39,6 +44,11 @@
 #define CLK_CON_DIV_CLKCMU_CORE_BUS		0x181c
 #define CLK_CON_DIV_CLKCMU_CORE_CCI		0x1820
 #define CLK_CON_DIV_CLKCMU_CORE_G3D		0x1824
+#define CLK_CON_DIV_CLKCMU_FSYS_BUS		0x1844
+#define CLK_CON_DIV_CLKCMU_FSYS_MMC_CARD	0x1848
+#define CLK_CON_DIV_CLKCMU_FSYS_MMC_EMBD	0x184c
+#define CLK_CON_DIV_CLKCMU_FSYS_MMC_SDIO	0x1850
+#define CLK_CON_DIV_CLKCMU_FSYS_USB30DRD	0x1854
 #define CLK_CON_DIV_CLKCMU_PERI_BUS		0x1874
 #define CLK_CON_DIV_CLKCMU_PERI_SPI0		0x1878
 #define CLK_CON_DIV_CLKCMU_PERI_SPI1		0x187c
@@ -59,6 +69,11 @@
 #define CLK_CON_GAT_GATE_CLKCMU_CORE_BUS	0x201c
 #define CLK_CON_GAT_GATE_CLKCMU_CORE_CCI	0x2020
 #define CLK_CON_GAT_GATE_CLKCMU_CORE_G3D	0x2024
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS_BUS	0x2044
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_CARD	0x2048
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_EMBD	0x204c
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_SDIO	0x2050
+#define CLK_CON_GAT_GATE_CLKCMU_FSYS_USB30DRD	0x2054
 #define CLK_CON_GAT_GATE_CLKCMU_PERI_BUS	0x207c
 #define CLK_CON_GAT_GATE_CLKCMU_PERI_SPI0	0x2080
 #define CLK_CON_GAT_GATE_CLKCMU_PERI_SPI1	0x2084
@@ -76,6 +91,11 @@ static const unsigned long top_clk_regs[] __initconst = {
 	CLK_CON_MUX_MUX_CLKCMU_CORE_BUS,
 	CLK_CON_MUX_MUX_CLKCMU_CORE_CCI,
 	CLK_CON_MUX_MUX_CLKCMU_CORE_G3D,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS_BUS,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_CARD,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_EMBD,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_SDIO,
+	CLK_CON_MUX_MUX_CLKCMU_FSYS_USB30DRD,
 	CLK_CON_MUX_MUX_CLKCMU_PERI_BUS,
 	CLK_CON_MUX_MUX_CLKCMU_PERI_SPI0,
 	CLK_CON_MUX_MUX_CLKCMU_PERI_SPI1,
@@ -88,6 +108,11 @@ static const unsigned long top_clk_regs[] __initconst = {
 	CLK_CON_DIV_CLKCMU_CORE_BUS,
 	CLK_CON_DIV_CLKCMU_CORE_CCI,
 	CLK_CON_DIV_CLKCMU_CORE_G3D,
+	CLK_CON_DIV_CLKCMU_FSYS_BUS,
+	CLK_CON_DIV_CLKCMU_FSYS_MMC_CARD,
+	CLK_CON_DIV_CLKCMU_FSYS_MMC_EMBD,
+	CLK_CON_DIV_CLKCMU_FSYS_MMC_SDIO,
+	CLK_CON_DIV_CLKCMU_FSYS_USB30DRD,
 	CLK_CON_DIV_CLKCMU_PERI_BUS,
 	CLK_CON_DIV_CLKCMU_PERI_SPI0,
 	CLK_CON_DIV_CLKCMU_PERI_SPI1,
@@ -108,6 +133,11 @@ static const unsigned long top_clk_regs[] __initconst = {
 	CLK_CON_GAT_GATE_CLKCMU_CORE_BUS,
 	CLK_CON_GAT_GATE_CLKCMU_CORE_CCI,
 	CLK_CON_GAT_GATE_CLKCMU_CORE_G3D,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS_BUS,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_CARD,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_EMBD,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_SDIO,
+	CLK_CON_GAT_GATE_CLKCMU_FSYS_USB30DRD,
 	CLK_CON_GAT_GATE_CLKCMU_PERI_BUS,
 	CLK_CON_GAT_GATE_CLKCMU_PERI_SPI0,
 	CLK_CON_GAT_GATE_CLKCMU_PERI_SPI1,
@@ -146,6 +176,13 @@ PNAME(mout_peri_usi0_p)		= { "oscclk", "dout_shared0_div4" };
 PNAME(mout_peri_usi1_p)		= { "oscclk", "dout_shared0_div4" };
 PNAME(mout_peri_usi2_p)		= { "oscclk", "dout_shared0_div4" };
 
+/* List of parent clocks for Muxes in CMU_TOP: for CMU_FSYS */
+PNAME(mout_fsys_bus_p)		= { "dout_shared0_div2", "dout_shared1_div2" };
+PNAME(mout_fsys_mmc_card_p)	= { "dout_shared0_div2", "dout_shared1_div2" };
+PNAME(mout_fsys_mmc_embd_p)	= { "dout_shared0_div2", "dout_shared1_div2" };
+PNAME(mout_fsys_mmc_sdio_p)	= { "dout_shared0_div2", "dout_shared1_div2" };
+PNAME(mout_fsys_usb30drd_p)	= { "dout_shared0_div4", "dout_shared1_div4" };
+
 static const struct samsung_mux_clock top_mux_clks[] __initconst = {
 	/* CORE */
 	MUX(CLK_MOUT_CORE_BUS, "mout_core_bus", mout_core_bus_p,
@@ -174,6 +211,18 @@ static const struct samsung_mux_clock top_mux_clks[] __initconst = {
 	    CLK_CON_MUX_MUX_CLKCMU_PERI_USI1, 0, 1),
 	MUX(CLK_MOUT_PERI_USI2, "mout_peri_usi2", mout_peri_usi2_p,
 	    CLK_CON_MUX_MUX_CLKCMU_PERI_USI2, 0, 1),
+
+	/* FSYS */
+	MUX(CLK_MOUT_FSYS_BUS, "mout_fsys_bus", mout_fsys_bus_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS_BUS, 0, 1),
+	MUX(CLK_MOUT_FSYS_MMC_CARD, "mout_fsys_mmc_card", mout_fsys_mmc_card_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_CARD, 0, 1),
+	MUX(CLK_MOUT_FSYS_MMC_EMBD, "mout_fsys_mmc_embd", mout_fsys_mmc_embd_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_EMBD, 0, 1),
+	MUX(CLK_MOUT_FSYS_MMC_SDIO, "mout_fsys_mmc_sdio", mout_fsys_mmc_sdio_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS_MMC_SDIO, 0, 1),
+	MUX(CLK_MOUT_FSYS_USB30DRD, "mout_fsys_usb30drd", mout_fsys_usb30drd_p,
+	    CLK_CON_MUX_MUX_CLKCMU_FSYS_USB30DRD, 0, 1),
 };
 
 static const struct samsung_div_clock top_div_clks[] __initconst = {
@@ -220,6 +269,18 @@ static const struct samsung_div_clock top_div_clks[] __initconst = {
 	    CLK_CON_DIV_CLKCMU_PERI_USI1, 0, 4),
 	DIV(CLK_DOUT_PERI_USI2, "dout_peri_usi2", "gout_peri_usi2",
 	    CLK_CON_DIV_CLKCMU_PERI_USI2, 0, 4),
+
+	/* FSYS */
+	DIV(CLK_DOUT_FSYS_BUS, "dout_fsys_bus", "gout_fsys_bus",
+	    CLK_CON_DIV_CLKCMU_FSYS_BUS, 0, 4),
+	DIV(CLK_DOUT_FSYS_MMC_CARD, "dout_fsys_mmc_card", "gout_fsys_mmc_card",
+	    CLK_CON_DIV_CLKCMU_FSYS_MMC_CARD, 0, 9),
+	DIV(CLK_DOUT_FSYS_MMC_EMBD, "dout_fsys_mmc_embd", "gout_fsys_mmc_embd",
+	    CLK_CON_DIV_CLKCMU_FSYS_MMC_EMBD, 0, 9),
+	DIV(CLK_DOUT_FSYS_MMC_SDIO, "dout_fsys_mmc_sdio", "gout_fsys_mmc_sdio",
+	    CLK_CON_DIV_CLKCMU_FSYS_MMC_SDIO, 0, 9),
+	DIV(CLK_DOUT_FSYS_USB30DRD, "dout_fsys_usb30drd", "gout_fsys_usb30drd",
+	    CLK_CON_DIV_CLKCMU_FSYS_USB30DRD, 0, 4),
 };
 
 static const struct samsung_gate_clock top_gate_clks[] __initconst = {
@@ -250,6 +311,18 @@ static const struct samsung_gate_clock top_gate_clks[] __initconst = {
 	     CLK_CON_GAT_GATE_CLKCMU_PERI_USI1, 21, 0, 0),
 	GATE(CLK_GOUT_PERI_USI2, "gout_peri_usi2", "mout_peri_usi2",
 	     CLK_CON_GAT_GATE_CLKCMU_PERI_USI2, 21, 0, 0),
+
+	/* FSYS */
+	GATE(CLK_GOUT_FSYS_BUS, "gout_fsys_bus", "mout_fsys_bus",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS_BUS, 21, 0, 0),
+	GATE(CLK_GOUT_FSYS_MMC_CARD, "gout_fsys_mmc_card", "mout_fsys_mmc_card",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_CARD, 21, 0, 0),
+	GATE(CLK_GOUT_FSYS_MMC_EMBD, "gout_fsys_mmc_embd", "mout_fsys_mmc_embd",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_EMBD, 21, 0, 0),
+	GATE(CLK_GOUT_FSYS_MMC_SDIO, "gout_fsys_mmc_sdio", "mout_fsys_mmc_sdio",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS_MMC_SDIO, 21, 0, 0),
+	GATE(CLK_GOUT_FSYS_USB30DRD, "gout_fsys_usb30drd", "mout_fsys_usb30drd",
+	     CLK_CON_GAT_GATE_CLKCMU_FSYS_USB30DRD, 21, 0, 0),
 };
 
 static const struct samsung_cmu_info top_cmu_info __initconst = {
@@ -560,6 +633,88 @@ static const struct samsung_cmu_info core_cmu_info __initconst = {
 	.clk_name		= "dout_core_bus",
 };
 
+/* ---- CMU_FSYS ------------------------------------------------------------ */
+
+/* Register Offset definitions for CMU_FSYS (0x13400000) */
+#define PLL_CON0_MUX_CLKCMU_FSYS_BUS_USER	0x0100
+#define PLL_CON0_MUX_CLKCMU_FSYS_MMC_CARD_USER	0x0120
+#define PLL_CON0_MUX_CLKCMU_FSYS_MMC_EMBD_USER	0x0140
+#define PLL_CON0_MUX_CLKCMU_FSYS_MMC_SDIO_USER	0x0160
+#define PLL_CON0_MUX_CLKCMU_FSYS_USB30DRD_USER	0x0180
+#define CLK_CON_GAT_GOUT_FSYS_MMC_CARD_I_ACLK	0x2030
+#define CLK_CON_GAT_GOUT_FSYS_MMC_CARD_SDCLKIN	0x2034
+#define CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_I_ACLK	0x2038
+#define CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_SDCLKIN	0x203c
+#define CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_I_ACLK	0x2040
+#define CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_SDCLKIN	0x2044
+
+static const unsigned long fsys_clk_regs[] __initconst = {
+	PLL_CON0_MUX_CLKCMU_FSYS_BUS_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS_MMC_CARD_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS_MMC_EMBD_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS_MMC_SDIO_USER,
+	PLL_CON0_MUX_CLKCMU_FSYS_USB30DRD_USER,
+	CLK_CON_GAT_GOUT_FSYS_MMC_CARD_I_ACLK,
+	CLK_CON_GAT_GOUT_FSYS_MMC_CARD_SDCLKIN,
+	CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_I_ACLK,
+	CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_SDCLKIN,
+	CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_I_ACLK,
+	CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_SDCLKIN,
+};
+
+/* List of parent clocks for Muxes in CMU_FSYS */
+PNAME(mout_fsys_bus_user_p)		= { "oscclk", "dout_fsys_bus" };
+PNAME(mout_fsys_mmc_card_user_p)	= { "oscclk", "dout_fsys_mmc_card" };
+PNAME(mout_fsys_mmc_embd_user_p)	= { "oscclk", "dout_fsys_mmc_embd" };
+PNAME(mout_fsys_mmc_sdio_user_p)	= { "oscclk", "dout_fsys_mmc_sdio" };
+PNAME(mout_fsys_usb30drd_user_p)	= { "oscclk", "dout_fsys_usb30drd" };
+
+static const struct samsung_mux_clock fsys_mux_clks[] __initconst = {
+	MUX(CLK_MOUT_FSYS_BUS_USER, "mout_fsys_bus_user", mout_fsys_bus_user_p,
+	    PLL_CON0_MUX_CLKCMU_FSYS_BUS_USER, 4, 1),
+	MUX_F(CLK_MOUT_FSYS_MMC_CARD_USER, "mout_fsys_mmc_card_user",
+	      mout_fsys_mmc_card_user_p, PLL_CON0_MUX_CLKCMU_FSYS_MMC_CARD_USER,
+	      4, 1, CLK_SET_RATE_PARENT, 0),
+	MUX_F(CLK_MOUT_FSYS_MMC_EMBD_USER, "mout_fsys_mmc_embd_user",
+	      mout_fsys_mmc_embd_user_p, PLL_CON0_MUX_CLKCMU_FSYS_MMC_EMBD_USER,
+	      4, 1, CLK_SET_RATE_PARENT, 0),
+	MUX_F(CLK_MOUT_FSYS_MMC_SDIO_USER, "mout_fsys_mmc_sdio_user",
+	      mout_fsys_mmc_sdio_user_p, PLL_CON0_MUX_CLKCMU_FSYS_MMC_SDIO_USER,
+	      4, 1, CLK_SET_RATE_PARENT, 0),
+	MUX_F(CLK_MOUT_FSYS_USB30DRD_USER, "mout_fsys_usb30drd_user",
+	      mout_fsys_usb30drd_user_p, PLL_CON0_MUX_CLKCMU_FSYS_USB30DRD_USER,
+	      4, 1, CLK_SET_RATE_PARENT, 0),
+};
+
+static const struct samsung_gate_clock fsys_gate_clks[] __initconst = {
+	GATE(CLK_GOUT_MMC_CARD_ACLK, "gout_mmc_card_aclk", "mout_fsys_bus_user",
+	     CLK_CON_GAT_GOUT_FSYS_MMC_CARD_I_ACLK, 21, 0, 0),
+	GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
+	     "mout_fsys_mmc_card_user", CLK_CON_GAT_GOUT_FSYS_MMC_CARD_SDCLKIN,
+	     21, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_GOUT_MMC_EMBD_ACLK, "gout_mmc_embd_aclk", "mout_fsys_bus_user",
+	     CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_I_ACLK, 21, 0, 0),
+	GATE(CLK_GOUT_MMC_EMBD_SDCLKIN, "gout_mmc_embd_sdclkin",
+	     "mout_fsys_mmc_embd_user", CLK_CON_GAT_GOUT_FSYS_MMC_EMBD_SDCLKIN,
+	     21, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_GOUT_MMC_SDIO_ACLK, "gout_mmc_sdio_aclk", "mout_fsys_bus_user",
+	     CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_I_ACLK, 21, 0, 0),
+	GATE(CLK_GOUT_MMC_SDIO_SDCLKIN, "gout_mmc_sdio_sdclkin",
+	     "mout_fsys_mmc_sdio_user", CLK_CON_GAT_GOUT_FSYS_MMC_SDIO_SDCLKIN,
+	     21, CLK_SET_RATE_PARENT, 0),
+};
+
+static const struct samsung_cmu_info fsys_cmu_info __initconst = {
+	.mux_clks		= fsys_mux_clks,
+	.nr_mux_clks		= ARRAY_SIZE(fsys_mux_clks),
+	.gate_clks		= fsys_gate_clks,
+	.nr_gate_clks		= ARRAY_SIZE(fsys_gate_clks),
+	.nr_clk_ids		= FSYS_NR_CLK,
+	.clk_regs		= fsys_clk_regs,
+	.nr_clk_regs		= ARRAY_SIZE(fsys_clk_regs),
+	.clk_name		= "dout_fsys_bus",
+};
+
 /* ---- platform_driver ----------------------------------------------------- */
 
 static int __init exynos7885_cmu_probe(struct platform_device *pdev)
@@ -577,6 +732,9 @@ static const struct of_device_id exynos7885_cmu_of_match[] = {
 	{
 		.compatible = "samsung,exynos7885-cmu-core",
 		.data = &core_cmu_info,
+	}, {
+		.compatible = "samsung,exynos7885-cmu-fsys",
+		.data = &fsys_cmu_info,
 	}, {
 	},
 };
Signature · 1 line
2.36.1
Reviewed-by on v1 3/5
#11 lore raw

Re: [PATCH 3/5] clk: samsung: exynos7885: Implement CMU_FSYS domain

Quoted 4 lines · David Virag

CMU_FSYS clock domain provides clocks for FSYS IP-core providing clocks for all MMC devices on Exynos7885, and USB30DRD.

This patch includes:

https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

s/This patch includes:/Add:/

Quoted 5 lines

- Bus clocks in CMU_TOP needed for CMU_FSYS
- All clocks in CMU_FSYS needed for MMC devices

---

Best regards,
Krzysztof

#12 lore raw

PATCH 4/5 clk: samsung: exynos7885: Add TREX clocks

In reply to David Virag

TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic Shaper) inside the Exynos7885 SoC, and are needed for the SoC to function correctly.

When clocks are cut from TREX D Core, the eMMC and the framebuffer stops working properly. Other unknown things may stop working as well.

When clocks are cut from TREX P Core, the system locks up needing a hard reset.

Add these clocks and mark them critical so that they are always on.

---
 drivers/clk/samsung/clk-exynos7885.c | 49 ++++++++++++++++++++++++----
 1 file changed, 42 insertions(+), 7 deletions(-)
drivers/clk/samsung/clk-exynos7885.c +42 -7
index 302937025409..0d2a950ed184 100644
@@ -571,13 +571,20 @@ CLK_OF_DECLARE(exynos7885_cmu_peri, "samsung,exynos7885-cmu-peri",
 /* ---- CMU_CORE ------------------------------------------------------------ */
 
 /* Register Offset definitions for CMU_CORE (0x12000000) */
-#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER	0x0100
-#define PLL_CON0_MUX_CLKCMU_CORE_CCI_USER	0x0120
-#define PLL_CON0_MUX_CLKCMU_CORE_G3D_USER	0x0140
-#define CLK_CON_MUX_MUX_CLK_CORE_GIC		0x1000
-#define CLK_CON_DIV_DIV_CLK_CORE_BUSP		0x1800
-#define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK	0x2054
-#define CLK_CON_GAT_GOUT_CORE_GIC400_CLK	0x2058
+#define PLL_CON0_MUX_CLKCMU_CORE_BUS_USER		0x0100
+#define PLL_CON0_MUX_CLKCMU_CORE_CCI_USER		0x0120
+#define PLL_CON0_MUX_CLKCMU_CORE_G3D_USER		0x0140
+#define CLK_CON_MUX_MUX_CLK_CORE_GIC			0x1000
+#define CLK_CON_DIV_DIV_CLK_CORE_BUSP			0x1800
+#define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK		0x2054
+#define CLK_CON_GAT_GOUT_CORE_GIC400_CLK		0x2058
+#define CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_ACLK		0x215c
+#define CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_GCLK		0x2160
+#define CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_PCLK		0x2164
+#define CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_ACLK_P_CORE	0x2168
+#define CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_CCLK_P_CORE	0x216c
+#define CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK		0x2170
+#define CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK_P_CORE	0x2174
 
 static const unsigned long core_clk_regs[] __initconst = {
 	PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
@@ -587,6 +594,13 @@ static const unsigned long core_clk_regs[] __initconst = {
 	CLK_CON_DIV_DIV_CLK_CORE_BUSP,
 	CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK,
 	CLK_CON_GAT_GOUT_CORE_GIC400_CLK,
+	CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_ACLK,
+	CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_GCLK,
+	CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_PCLK,
+	CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_ACLK_P_CORE,
+	CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_CCLK_P_CORE,
+	CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK,
+	CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK_P_CORE,
 };
 
 /* List of parent clocks for Muxes in CMU_CORE */
@@ -618,6 +632,27 @@ static const struct samsung_gate_clock core_gate_clks[] __initconst = {
 	/* GIC (interrupt controller) clock must be always running */
 	GATE(CLK_GOUT_GIC400_CLK, "gout_gic400_clk", "mout_core_gic",
 	     CLK_CON_GAT_GOUT_CORE_GIC400_CLK, 21, CLK_IS_CRITICAL, 0),
+	/*
+	 * TREX D and P Core (seems to be related to "bus traffic shaper")
+	 * clocks must always be running
+	 */
+	GATE(CLK_GOUT_TREX_D_CORE_ACLK, "gout_trex_d_core_aclk", "mout_core_bus_user",
+	     CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_ACLK, 21, CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_D_CORE_GCLK, "gout_trex_d_core_gclk", "mout_core_g3d_user",
+	     CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_GCLK, 21, CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_D_CORE_PCLK, "gout_trex_d_core_pclk", "dout_core_busp",
+	     CLK_CON_GAT_GOUT_CORE_TREX_D_CORE_PCLK, 21, CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_P_CORE_ACLK_P_CORE, "gout_trex_p_core_aclk_p_core",
+	     "mout_core_bus_user", CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_ACLK_P_CORE, 21,
+	     CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_P_CORE_CCLK_P_CORE, "gout_trex_p_core_cclk_p_core",
+	     "mout_core_cci_user", CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_CCLK_P_CORE, 21,
+	     CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_P_CORE_PCLK, "gout_trex_p_core_pclk", "dout_core_busp",
+	     CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK, 21, CLK_IS_CRITICAL, 0),
+	GATE(CLK_GOUT_TREX_P_CORE_PCLK_P_CORE, "gout_trex_p_core_pclk_p_core",
+	     "dout_core_busp", CLK_CON_GAT_GOUT_CORE_TREX_P_CORE_PCLK_P_CORE, 21,
+	     CLK_IS_CRITICAL, 0),
 };
 
 static const struct samsung_cmu_info core_cmu_info __initconst = {
Signature · 1 line
2.36.1
Reviewed-by on v1 4/5
#13 lore raw

Re: [PATCH 4/5] clk: samsung: exynos7885: Add TREX clocks

Quoted 11 lines · David Virag

TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic Shaper) inside the Exynos7885 SoC, and are needed for the SoC to function correctly.

When clocks are cut from TREX D Core, the eMMC and the framebuffer stops working properly. Other unknown things may stop working as well.

When clocks are cut from TREX P Core, the system locks up needing a hard reset.

Add these clocks and mark them critical so that they are always on.

Best regards,
Krzysztof

#14 lore raw

PATCH 5/5 arm64: dts: exynos: Add internal eMMC support to jackpotlte

In reply to David Virag

Add the nodes relevant to provide clocks for Exynos7885 eMMC and to support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8 (2018) (jackpotlte), and all other known devices using the Exynos7885 SoC.

---
 .../boot/dts/exynos/exynos7885-jackpotlte.dts | 20 ++++++++++++
 arch/arm64/boot/dts/exynos/exynos7885.dtsi    | 32 +++++++++++++++++++
 2 files changed, 52 insertions(+)
arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +20 -0
index 4cf9aa25f618..5db9a81ac7bb 100644
@@ -60,6 +60,26 @@ power-key {
 	};
 };
 
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs
+		     &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+};
+
 &oscclk {
 	clock-frequency = <26000000>;
 };
arch/arm64/boot/dts/exynos/exynos7885.dtsi +32 -0
index 9c233c56558c..23c2e0bb0a2c 100644
@@ -240,6 +240,25 @@ cmu_top: clock-controller@12060000 {
 			clock-names = "oscclk";
 		};
 
+		cmu_fsys: clock-controller@13400000 {
+			compatible = "samsung,exynos7885-cmu-fsys";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_FSYS_BUS>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>,
+				 <&cmu_top CLK_DOUT_FSYS_USB30DRD>;
+			clock-names = "oscclk",
+				      "dout_fsys_bus",
+				      "dout_fsys_mmc_card",
+				      "dout_fsys_mmc_embd",
+				      "dout_fsys_mmc_sdio",
+				      "dout_fsys_usb30drd";
+		};
+
 		pinctrl_alive: pinctrl@11cb0000 {
 			compatible = "samsung,exynos7885-pinctrl";
 			reg = <0x11cb0000 0x1000>;
@@ -274,6 +293,19 @@ pmu_system_controller: system-controller@11c80000 {
 			reg = <0x11c80000 0x10000>;
 		};
 
+		mmc_0: mmc@13500000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x13500000 0x2000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
Signature · 1 line
2.36.1
#15 lore raw

Re: [PATCH 5/5] arm64: dts: exynos: Add internal eMMC support to jackpotlte

Quoted 18 lines · David Virag

Add the nodes relevant to provide clocks for Exynos7885 eMMC and to support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8 (2018) (jackpotlte), and all other known devices using the Exynos7885 SoC.

---
 .../boot/dts/exynos/exynos7885-jackpotlte.dts | 20 ++++++++++++
 arch/arm64/boot/dts/exynos/exynos7885.dtsi    | 32 +++++++++++++++++++
 2 files changed, 52 insertions(+)
arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +0 -0
index 4cf9aa25f618..5db9a81ac7bb 100644
@@ -60,6 +60,26 @@ power-key {
 	};
 };

arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts power-key { · line 71

Quoted 10 lines
arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +9 -0
 
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;

Is this real property for MMC? Neither mmc nor DW MSHC bindings mention it.

Best regards,
Krzysztof

#16 lore raw

Re: [PATCH 5/5] arm64: dts: exynos: Add internal eMMC support to jackpotlte

Quoted 28 lines · Krzysztof Kozlowski
Quoted 27 lines · David Virag

Add the nodes relevant to provide clocks for Exynos7885 eMMC and to support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8
(2018) (jackpotlte), and all other known devices using the Exynos7885
SoC.

---
 .../boot/dts/exynos/exynos7885-jackpotlte.dts | 20 ++++++++++++ arch/arm64/boot/dts/exynos/exynos7885.dtsi    | 32
+++++++++++++++++++

 2 files changed, 52 insertions(+)
arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +0 -0
index 4cf9aa25f618..5db9a81ac7bb 100644
@@ -60,6 +60,26 @@ power-key {
         };
  };


+&mmc_0 {
+       status = "okay";
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;

Quoted 8 lines
Quoted 5 lines

+       cap-mmc-highspeed;
+       non-removable;
+       mmc-hs400-enhanced-strobe;
+       card-detect-delay = <200>;
+       clock-frequency = <800000000>;

Is this real property for MMC? Neither mmc nor DW MSHC bindings mention it.

It is, but I don't remember trying without it. Seems like it is not documented then. It is used in dw_mmc.c in the following places:

https://github.com/torvalds/linux/blob/master/drivers/mmc/host/dw_mmc.c#L3242-L3243

https://github.com/torvalds/linux/blob/master/drivers/mmc/host/dw_mmc.c#L3306-L3325

The Exynos850 device tree has the same property in it's mmc node.

Quoted 3 lines

Best regards,
Krzysztof

Best regards,
David

#17 lore raw

Re: [PATCH 5/5] arm64: dts: exynos: Add internal eMMC support to jackpotlte

Quoted 38 lines · David Virag
Quoted 28 lines · Krzysztof Kozlowski
Quoted 27 lines · David Virag

Add the nodes relevant to provide clocks for Exynos7885 eMMC and to support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8
(2018) (jackpotlte), and all other known devices using the Exynos7885
SoC.

---
 .../boot/dts/exynos/exynos7885-jackpotlte.dts | 20 ++++++++++++ arch/arm64/boot/dts/exynos/exynos7885.dtsi    | 32
+++++++++++++++++++

 2 files changed, 52 insertions(+)
arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +0 -0
index 4cf9aa25f618..5db9a81ac7bb 100644
@@ -60,6 +60,26 @@ power-key {
         };
  };


+&mmc_0 {
+       status = "okay";
+       mmc-hs200-1_8v;
+       mmc-hs400-1_8v;

Quoted 8 lines
Quoted 5 lines

+       cap-mmc-highspeed;
+       non-removable;
+       mmc-hs400-enhanced-strobe;
+       card-detect-delay = <200>;
+       clock-frequency = <800000000>;

Is this real property for MMC? Neither mmc nor DW MSHC bindings mention it.

Quoted 8 lines

It is, but I don't remember trying without it. Seems like it is not documented then. It is used in dw_mmc.c in the following places:

https://github.com/torvalds/linux/blob/master/drivers/mmc/host/dw_mmc.c#L3242-L3243

https://github.com/torvalds/linux/blob/master/drivers/mmc/host/dw_mmc.c#L3306-L3325

The Exynos850 device tree has the same property in it's mmc node.

Indeed, it's fine then. I'll check the bindings and convert them to DT schema.

Best regards,
Krzysztof

#18 lore raw

Re: (subset) [PATCH 5/5] arm64: dts: exynos: Add internal eMMC support to jackpotlte

In reply to David Virag
Quoted 6 lines · David Virag

Add the nodes relevant to provide clocks for Exynos7885 eMMC and to support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8 (2018) (jackpotlte), and all other known devices using the Exynos7885 SoC.

Applied, thanks!

[5/5] arm64: dts: exynos: Add internal eMMC support to jackpotlte

      https://git.kernel.org/krzk/linux/c/ced37411d7f597129fecc0c3ca2324f44e33f4c8

Best regards,

Signature · 1 line
Krzysztof Kozlowski <[email protected]>