ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
PATCH 1/2 ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
The host and otg regulator pinctrl settings got swapped, making the host reference the otg pinctrl and the other way round. The actual pins are correct (gpio0-3 for host and gpio2-31 for otg).
Reported-by Naoki FUKAUMI <[email protected]>
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3188-radxarock.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/rk3188-radxarock.dts +2 -2
@@ -70,7 +70,7 @@ enable-active-high; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; + pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
@@ -93,7 +93,7 @@ enable-active-high; gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; + pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>;
Signature · 1 line
2.0.1
PATCH 2/2 ARM: dts: rockchip: fix rk3188 emmc pull references
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference the pcfg_pull_default setting that is not available on rk3188.
Reported-by Naoki FUKAUMI <[email protected]>
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3188.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/rk3188.dtsi +3 -3
@@ -149,15 +149,15 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; }; emmc_rst: emmc-rst { - rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; }; /*
Signature · 1 line
2.0.1