arm64: dts: imx8mm-kontron: Add RTC aliases
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm-kontron: Add RTC aliases
From: Frieder Schrempf <[email protected]>
Add aliases for the RTCs on the board and on the SoC. This ensures that the primary RTC is always the one on the board that has a buffered supply and maximum accuracy.
This is a direct port of the pending commit from linux-next.
--- arch/arm/dts/imx8mm-kontron-bl.dts | 4 +++- arch/arm/dts/imx8mm-kontron-osm-s.dtsi | 7 ++++++- 2 files changed, 9 insertions(+), 2 deletions(-)
arch/arm/dts/imx8mm-kontron-bl.dts +3 -1
@@ -13,6 +13,8 @@ aliases { ethernet1 = &usbnet; + rtc0 = &rx8900; + rtc1 = &snvs_rtc; }; /* fixed crystal dedicated to mcp2515 */
@@ -136,7 +138,7 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; - rtc@32 { + rx8900: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; };
arch/arm/dts/imx8mm-kontron-osm-s.dtsi +6 -1
@@ -10,6 +10,11 @@ model = "Kontron OSM-S i.MX8MM (N802X SOM)"; compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm"; + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + memory@40000000 { device_type = "memory"; /*
@@ -200,7 +205,7 @@ }; }; - rtc@52 { + rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; pinctrl-names = "default";
Signature · 1 line
2.39.0
Quoted 10 lines · Frieder Schrempf
From: Frieder Schrempf <[email protected]>
Add aliases for the RTCs on the board and on the SoC. This ensures that the primary RTC is always the one on the board that has a buffered supply and maximum accuracy.
This is a direct port of the pending commit from linux-next.
Signed-off-by Frieder Schrempf <[email protected]>Signed-off-by Shawn Guo <[email protected]>
PATCH 1/1 arm64: dts: imx8mm-kontron: Add RTC aliases
In reply to Frieder SchrempfQuoted 8 lines
From: Frieder Schrempf <[email protected]>
Add aliases for the RTCs on the board and on the SoC. This ensures that the primary RTC is always the one on the board that has a buffered supply and maximum accuracy.
This is a direct port of the pending commit from linux-next.Signed-off-by Frieder Schrempf <[email protected]>Signed-off-by Shawn Guo <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================