gap: Don't attempt to read the appearance if already set
Luiz Augusto von Dentz
maintainerRFC 1/1 gap: Don't attempt to read the appearance if already set
From: Luiz Augusto von Dentz <[email protected]>
Devices are unlikely to change appearance over time which is the reason why we cache then on the storage so this skips reading it on every reconnection.
--- profiles/gap/gas.c | 5 +++++ 1 file changed, 5 insertions(+)
profiles/gap/gas.c +5 -0
@@ -142,6 +142,11 @@ static void read_appearance_cb(bool success, uint8_t att_ecode,static void handle_appearance (struct gas *gas,uint16_t value_handle) { +uint16_t value; + +if (!device_get_appearance (gas->device, &value)) +return ; +if (!bt_gatt_client_read_value (gas->client, value_handle, read_appearance_cb, gas,NULL ))DBG ("Failed to send request to read appearance" );
Signature · 1 line
2.35.1
Luiz Augusto von Dentz
maintainerHi Adam,
Quoted 27 lines · Luiz Augusto von Dentz
From: Luiz Augusto von Dentz <[email protected]>
Devices are unlikely to change appearance over time which is the reason why we cache then on the storage so this skips reading it on every reconnection.
--- profiles/gap/gas.c | 5 +++++ 1 file changed, 5 insertions(+)profiles/gap/gas.c +5
-1@@ -142,6 +142,11 @@ static void read_appearance_cb(bool success, uint8_t att_ecode,static void handle_appearance (struct gas *gas,uint16_t value_handle) { +uint16_t value; + +if (!device_get_appearance (gas->device, &value)) +return ; +if (!bt_gatt_client_read_value (gas->client, value_handle, read_appearance_cb, gas,NULL ))DBG ("Failed to send request to read appearance" ); --
Quoted 1 line
2.35.1
Check if the above works for you.
Signature · 1 line
Luiz Augusto von Dentz
Hi Luiz
Quoted 21 lines · Luiz Augusto von Dentz
Hi Adam,
Quoted 16 lines · Luiz Augusto von Dentz
From: Luiz Augusto von Dentz <[email protected]>
Devices are unlikely to change appearance over time which is the reason why we cache then on the storage so this skips reading it on every reconnection.
--- profiles/gap/gas.c | 5 +++++ 1 file changed, 5 insertions(+)profiles/gap/gas.c +0
-0@@ -142,6 +142,11 @@ static void read_appearance_cb(bool success, uint8_t att_ecode,
Quoted 15 lines
Quoted 11 lines
profiles/gap/gas.c +5
-1static void handle_appearance (struct gas *gas,uint16_t value_handle) { +uint16_t value; + +if (!device_get_appearance (gas->device, &value)) +return ; +if (!bt_gatt_client_read_value (gas->client, value_handle, read_appearance_cb, gas,NULL ))DBG ("Failed to send request to read appearance" ); --Quoted 1 line
2.35.1
Check if the above works for you.
Yes, this will work for me.
Reading the appearance still fails, but at least I can manually set it in the info file, and I can instruct users to do the same,
The other way I was thinking about making it work would be to add some kind of quirk to skip reading the appearance altogether, which would probably also require editing a config file anyway, and this way, the appearance value gets set (im using 0x0192)
Thanks
Quoted 2 lines
--
Luiz Augusto von Dentz
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=628906
---Test result---
Test Summary:
CheckPatch PASS 0.65 seconds GitLint PASS 0.45 seconds Prep - Setup ELL PASS 45.95 seconds Build - Prep PASS 0.44 seconds Build - Configure PASS 9.39 seconds Build - Make PASS 1311.83 seconds Make Check PASS 12.17 seconds Make Check w/Valgrind PASS 472.21 seconds Make Distcheck PASS 252.30 seconds Build w/ext ELL - Configure PASS 8.86 seconds Build w/ext ELL - Make PASS 1291.83 seconds Incremental Build with patchesPASS 0.00 seconds
---
Regards,
Linux Bluetooth
Dear Luiz,
Am 04.04.22 um 22:17 schrieb Luiz Augusto von Dentz:
Quoted 4 lines
From: Luiz Augusto von Dentz <[email protected]>
Devices are unlikely to change appearance over time which is the reason why we cache then on the storage so this skips reading it on every
s/then/them/
Quoted 1 line
reconnection.
Kind regards,
Paul
Quoted 20 lines
--- profiles/gap/gas.c | 5 +++++ 1 file changed, 5 insertions(+)profiles/gap/gas.c +5
-0@@ -142,6 +142,11 @@ static void read_appearance_cb(bool success, uint8_t att_ecode,static void handle_appearance (struct gas *gas,uint16_t value_handle) { +uint16_t value; + +if (!device_get_appearance (gas->device, &value)) +return ; +if (!bt_gatt_client_read_value (gas->client, value_handle, read_appearance_cb, gas,NULL ))DBG ("Failed to send request to read appearance" );
This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Mon, 4 Apr 2022 13:17:50 -0700 you wrote:
From: Luiz Augusto von Dentz <[email protected]>
Devices are unlikely to change appearance over time which is the reason why we cache then on the storage so this skips reading it on every reconnection.
--- profiles/gap/gas.c | 5 +++++ 1 file changed, 5 insertions(+)
Here is the summary with links:
- [RFC,BlueZ] gap: Don't attempt to read the appearance if already set
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=bbeabca44a3d
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html