Bluetooth: btmtksdio: Add in-band wakeup support
Subsystems (2)
PATCH v3 1/1 Bluetooth: btmtksdio: Add in-band wakeup support
From: Sean Wang <[email protected]>
Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO.
Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver.
---
v2: enhance the patch description and comments
v3: add a way suggested by the AngeloGioacchino Del Regno that look
elegant and can avoid the addition of the BTMTKSDIO_INBAND_WAKEUP flag
--- drivers/bluetooth/btmtksdio.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
drivers/bluetooth/btmtksdio.c +15 -0
@@ -1282,6 +1282,13 @@ static void btmtksdio_cmd_timeout(struct hci_dev *hdev)hci_reset_dev (hdev); } +static bool btmtksdio_sdio_inband_wakeup (struct hci_dev *hdev) +{ +struct btmtksdio_dev *bdev =hci_get_drvdata (hdev); + +return device_may_wakeup (bdev->dev); +} +static bool btmtksdio_sdio_wakeup (struct hci_dev *hdev) {struct btmtksdio_dev *bdev =hci_get_drvdata (hdev);
@@ -1349,6 +1356,14 @@ static int btmtksdio_probe(struct sdio_func *func, hdev->shutdown = btmtksdio_shutdown; hdev->send = btmtksdio_send_frame; hdev->wakeup = btmtksdio_sdio_wakeup; +/* +* If SDIO controller supports wake on Bluetooth, sending a wakeon +* command is not necessary. +*/ +if (device_can_wakeup (func->card->host->parent)) + hdev->wakeup = btmtksdio_sdio_inband_wakeup; +else + hdev->wakeup = btmtksdio_sdio_wakeup; hdev->set_bdaddr = btmtk_set_bdaddr;SET_HCIDEV_DEV (hdev, &func->dev);
Signature · 1 line
2.25.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=653986
---Test result---
Test Summary:
CheckPatch PASS 1.34 seconds GitLint PASS 0.76 seconds SubjectPrefix PASS 0.65 seconds BuildKernel PASS 32.11 seconds BuildKernel32 PASS 28.16 seconds Incremental Build with patchesPASS 38.75 seconds TestRunner: Setup PASS 481.60 seconds TestRunner: l2cap-tester PASS 17.44 seconds TestRunner: bnep-tester PASS 6.14 seconds TestRunner: mgmt-tester PASS 103.10 seconds TestRunner: rfcomm-tester PASS 9.59 seconds TestRunner: sco-tester PASS 9.44 seconds TestRunner: smp-tester PASS 9.46 seconds TestRunner: userchan-tester PASS 6.37 seconds
---
Regards,
Linux Bluetooth
Il 27/06/22 01:27, [email protected] ha scritto:
Quoted 11 lines
From: Sean Wang <[email protected]>
Commit
ce64b3e94919("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO.Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver.
Co-developed-by Yake Yang <[email protected]>Signed-off-by Yake Yang <[email protected]>Signed-off-by Sean Wang <[email protected]>
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 9 lines · On Mon, 27 Jun 2022 07:27:36 +0800 you wrote:
From: Sean Wang <[email protected]>
Commit
ce64b3e94919("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO.Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver.
[...]
Here is the summary with links:
- [v3] Bluetooth: btmtksdio: Add in-band wakeup support
https://git.kernel.org/bluetooth/bluetooth-next/c/681ec6abcd7f
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html