Skip to contentSkip to conversation

net: phy: remove genphy_config_init

PATCH Superseded Heiner Kallweit 2 participants 6 messages Aug 16, 2019 – Aug 17, 2019

Subsystems (7)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Heiner Kallweit

author maintainer
#0 lore raw

v2 cover net: phy: remove genphy_config_init

Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove genphy_config_init.

v2:
- remove call also from new adin driver

Heiner Kallweit (3):
net: phy: remove calls to genphy_config_init
net: dsa: remove calls to genphy_config_init
net: phy: remove genphy_config_init

 drivers/net/phy/adin.c         |  4 ---
 drivers/net/phy/at803x.c       |  4 ---
 drivers/net/phy/dp83822.c      |  5 ----
 drivers/net/phy/dp83848.c      | 16 +++++------
 drivers/net/phy/dp83tc811.c    |  4 ---
 drivers/net/phy/meson-gxl.c    |  2 +-
 drivers/net/phy/microchip.c    |  1 -
 drivers/net/phy/microchip_t1.c |  1 -
 drivers/net/phy/mscc.c         |  4 +--
 drivers/net/phy/phy_device.c   | 51 ----------------------------------
 drivers/net/phy/vitesse.c      |  6 ++--
 include/linux/phy.h            |  1 -
 net/dsa/port.c                 |  5 ----
 13 files changed, 14 insertions(+), 90 deletions(-)
Signature · 1 line
2.22.1
author maintainer
#1 lore raw

PATCH v2 1/3 net: phy: remove calls to genphy_config_init

Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers.

v2:
- remove call also from new adin PHY driver

---
 drivers/net/phy/adin.c         |  4 ----
 drivers/net/phy/at803x.c       |  4 ----
 drivers/net/phy/dp83822.c      |  5 -----
 drivers/net/phy/dp83848.c      | 16 ++++++++--------
 drivers/net/phy/dp83tc811.c    |  4 ----
 drivers/net/phy/meson-gxl.c    |  2 +-
 drivers/net/phy/microchip.c    |  1 -
 drivers/net/phy/microchip_t1.c |  1 -
 drivers/net/phy/mscc.c         |  4 ++--
 drivers/net/phy/vitesse.c      |  6 +++---
 10 files changed, 14 insertions(+), 33 deletions(-)
drivers/net/phy/adin.c +0 -4
index ac79e16cd..4dec83df0 100644
@@ -356,10 +356,6 @@ static int adin_config_init(struct phy_device *phydev)
 
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 
-	rc = genphy_config_init(phydev);
-	if (rc < 0)
-		return rc;
-
 	rc = adin_config_rgmii_mode(phydev);
 	if (rc < 0)
 		return rc;
drivers/net/phy/at803x.c +0 -4
index 222ccd9ec..d98aa5671 100644
@@ -249,10 +249,6 @@ static int at803x_config_init(struct phy_device *phydev)
 {
 	int ret;
 
-	ret = genphy_config_init(phydev);
-	if (ret < 0)
-		return ret;
-
 	/* The RX and TX delay default is:
 	 *   after HW reset: RX delay enabled and TX delay disabled
 	 *   after SW reset: RX delay enabled, while TX delay retains the
drivers/net/phy/dp83822.c +0 -5
index 7ed4760fb..8a4b1d167 100644
@@ -254,13 +254,8 @@ static int dp83822_config_intr(struct phy_device *phydev)
 
 static int dp83822_config_init(struct phy_device *phydev)
 {
-	int err;
 	int value;
 
-	err = genphy_config_init(phydev);
-	if (err < 0)
-		return err;
-
 	value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN;
 
 	return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
drivers/net/phy/dp83848.c +8 -8
index 6f9bc7d91..11644579a 100644
@@ -68,13 +68,8 @@ static int dp83848_config_intr(struct phy_device *phydev)
 
 static int dp83848_config_init(struct phy_device *phydev)
 {
-	int err;
 	int val;
 
-	err = genphy_config_init(phydev);
-	if (err < 0)
-		return err;
-
 	/* DP83620 always reports Auto Negotiation Ability on BMSR. Instead,
 	 * we check initial value of BMCR Auto negotiation enable bit
 	 */
@@ -85,6 +80,11 @@ static int dp83848_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int dummy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
 static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
 	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
 	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
@@ -113,13 +113,13 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 
 static struct phy_driver dp83848_driver[] = {
 	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
 			   dp83848_config_init),
 	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 };
 module_phy_driver(dp83848_driver);
 
drivers/net/phy/dp83tc811.c +0 -4
index ac27da168..06f08832e 100644
@@ -277,10 +277,6 @@ static int dp83811_config_init(struct phy_device *phydev)
 {
 	int value, err;
 
-	err = genphy_config_init(phydev);
-	if (err < 0)
-		return err;
-
 	value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 		err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
drivers/net/phy/meson-gxl.c +1 -1
index fa80d6dce..e8f2ca625 100644
@@ -136,7 +136,7 @@ static int meson_gxl_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return genphy_config_init(phydev);
+	return 0;
 }
 
 /* This function is provided to cope with the possible failures of this phy
drivers/net/phy/microchip.c +0 -1
index eb1b3287f..a644e8e50 100644
@@ -305,7 +305,6 @@ static int lan88xx_config_init(struct phy_device *phydev)
 {
 	int val;
 
-	genphy_config_init(phydev);
 	/*Zerodetect delay enable */
 	val = phy_read_mmd(phydev, MDIO_MMD_PCS,
 			   PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
drivers/net/phy/microchip_t1.c +0 -1
index 3d09b4716..001def450 100644
@@ -48,7 +48,6 @@ static struct phy_driver microchip_t1_phy_driver[] = {
 
 		.features       = PHY_BASIC_T1_FEATURES,
 
-		.config_init    = genphy_config_init,
 		.config_aneg    = genphy_config_aneg,
 
 		.ack_interrupt  = lan87xx_phy_ack_interrupt,
drivers/net/phy/mscc.c +2 -2
index 645d354ff..7ada1fd9c 100644
@@ -1725,7 +1725,7 @@ static int vsc8584_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
-	return genphy_config_init(phydev);
+	return 0;
 
 err:
 	mutex_unlock(&phydev->mdio.bus->mdio_lock);
@@ -1767,7 +1767,7 @@ static int vsc85xx_config_init(struct phy_device *phydev)
 			return rc;
 	}
 
-	return genphy_config_init(phydev);
+	return 0;
 }
 
 static int vsc8584_did_interrupt(struct phy_device *phydev)
drivers/net/phy/vitesse.c +3 -3
index 43691b1ac..bb6803527 100644
@@ -197,7 +197,7 @@ static int vsc738x_config_init(struct phy_device *phydev)
 
 	vsc73xx_config_init(phydev);
 
-	return genphy_config_init(phydev);
+	return 0;
 }
 
 static int vsc739x_config_init(struct phy_device *phydev)
@@ -229,7 +229,7 @@ static int vsc739x_config_init(struct phy_device *phydev)
 
 	vsc73xx_config_init(phydev);
 
-	return genphy_config_init(phydev);
+	return 0;
 }
 
 static int vsc73xx_config_aneg(struct phy_device *phydev)
@@ -267,7 +267,7 @@ static int vsc8601_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	return genphy_config_init(phydev);
+	return 0;
 }
 
 static int vsc824x_ack_interrupt(struct phy_device *phydev)
Signature · 1 line
2.22.1
#2 lore raw

Re: [PATCH net-next v2 1/3] net: phy: remove calls to genphy_config_init

Quoted 11 lines · Heiner Kallweit

Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers.

v2:
- remove call also from new adin PHY driver

Looks good, just one question below:

Quoted 12 lines
drivers/net/phy/dp83848.c +5 -0
+static int dummy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
 static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
 	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
 	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
@@ -113,13 +113,13 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 
 static struct phy_driver dp83848_driver[] = {
 	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",

drivers/net/phy/dp83848.c MODULE_DEVICE_TABLE(mdio, dp83848_tbl); · line 122

Quoted 10 lines
drivers/net/phy/dp83848.c +3 -3
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
 			   dp83848_config_init),
 	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),

drv->config_init is an optional callback so you could just either pass NULL as an argument to the macro, or simply remove that parameter?

Signature · 1 line
Florian
author maintainer
#3 lore raw

Re: [PATCH net-next v2 1/3] net: phy: remove calls to genphy_config_init

Quoted 25 lines · Florian Fainelli
Quoted 11 lines · Heiner Kallweit

Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed. All that genphy_config_init does is removing features that are set as supported but can't be auto-detected. Basically it duplicates the code in genphy_read_abilities. Therefore remove such calls from all PHY drivers.

v2:
- remove call also from new adin PHY driver

Looks good, just one question below:

Quoted 10 lines
drivers/net/phy/dp83848.c +5 -0
+static int dummy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
 static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
 	{ TI_DP83848C_PHY_ID, 0xfffffff0 },
 	{ NS_DP83848C_PHY_ID, 0xfffffff0 },
@@ -113,13 +113,13 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 
Quoted 16 lines

drivers/net/phy/dp83848.c MODULE_DEVICE_TABLE(mdio, dp83848_tbl); · line 122

Quoted 12 lines
drivers/net/phy/dp83848.c +3 -3
 static struct phy_driver dp83848_driver[] = {
 	DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),
 	DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY",
 			   dp83848_config_init),
 	DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
-			   genphy_config_init),
+			   dummy_config_init),

drv->config_init is an optional callback so you could just either pass NULL as an argument to the macro, or simply remove that parameter?

Yes, this can be simplified. Let's pass NULL. Thanks!

author maintainer
#4 lore raw

PATCH v2 2/3 net: dsa: remove calls to genphy_config_init

In reply to Heiner Kallweit

Supported PHY features are either auto-detected or explicitly set. In both cases calling genphy_config_init isn't needed.

---
 net/dsa/port.c | 5 -----
 1 file changed, 5 deletions(-)
net/dsa/port.c +0 -5
index f071acf28..f75301456 100644
@@ -538,10 +538,6 @@ static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
 		return PTR_ERR(phydev);
 
 	if (enable) {
-		err = genphy_config_init(phydev);
-		if (err < 0)
-			goto err_put_dev;
-
 		err = genphy_resume(phydev);
 		if (err < 0)
 			goto err_put_dev;
@@ -589,7 +585,6 @@ static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
 		mode = PHY_INTERFACE_MODE_NA;
 	phydev->interface = mode;
 
-	genphy_config_init(phydev);
 	genphy_read_status(phydev);
 
 	if (ds->ops->adjust_link)
Signature · 1 line
2.22.1
author maintainer
#5 lore raw

PATCH v2 3/3 net: phy: remove genphy_config_init

In reply to Heiner Kallweit

Now that all users have been removed we can remove genphy_config_init.

---
 drivers/net/phy/phy_device.c | 51 ------------------------------------
 include/linux/phy.h          |  1 -
 2 files changed, 52 deletions(-)
drivers/net/phy/phy_device.c +0 -51
index 9c546bae9..d5db7604d 100644
@@ -1885,57 +1885,6 @@ int genphy_soft_reset(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(genphy_soft_reset);
 
-int genphy_config_init(struct phy_device *phydev)
-{
-	int val;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(features) = { 0, };
-
-	linkmode_set_bit_array(phy_basic_ports_array,
-			       ARRAY_SIZE(phy_basic_ports_array),
-			       features);
-	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, features);
-	linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, features);
-
-	/* Do we support autonegotiation? */
-	val = phy_read(phydev, MII_BMSR);
-	if (val < 0)
-		return val;
-
-	if (val & BMSR_ANEGCAPABLE)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, features);
-
-	if (val & BMSR_100FULL)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, features);
-	if (val & BMSR_100HALF)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, features);
-	if (val & BMSR_10FULL)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, features);
-	if (val & BMSR_10HALF)
-		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, features);
-
-	if (val & BMSR_ESTATEN) {
-		val = phy_read(phydev, MII_ESTATUS);
-		if (val < 0)
-			return val;
-
-		if (val & ESTATUS_1000_TFULL)
-			linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-					 features);
-		if (val & ESTATUS_1000_THALF)
-			linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-					 features);
-		if (val & ESTATUS_1000_XFULL)
-			linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-					 features);
-	}
-
-	linkmode_and(phydev->supported, phydev->supported, features);
-	linkmode_and(phydev->advertising, phydev->advertising, features);
-
-	return 0;
-}
-EXPORT_SYMBOL(genphy_config_init);
-
 /**
  * genphy_read_abilities - read PHY abilities from Clause 22 registers
  * @phydev: target phy_device struct
include/linux/phy.h +0 -1
index 5ac7d2137..d26779f1f 100644
@@ -1069,7 +1069,6 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 void phy_attached_info(struct phy_device *phydev);
 
 /* Clause 22 PHY */
-int genphy_config_init(struct phy_device *phydev);
 int genphy_read_abilities(struct phy_device *phydev);
 int genphy_setup_forced(struct phy_device *phydev);
 int genphy_restart_aneg(struct phy_device *phydev);
Signature · 1 line
2.22.1