Skip to contentSkip to conversation

mgmt-tester: Fix Get/Set PHY tests

PATCH RESEND Applied Luiz Augusto von Dentz 3 participants 3 messages Apr 7, 2023 Bluetooth drivers

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH RESEND 1/1 mgmt-tester: Fix Get/Set PHY tests

From: Luiz Augusto von Dentz <[email protected]>

This fixes the following tests now that all supported PHYs are enabled by default:

Start Discovery LE - (Ext Scan Param)   Failed
Get PHY Success                         Failed
Set PHY 1m 2m coded Succcess            Timed out
---
 tools/mgmt-tester.c | 49 ++++++++++++++++++---------------------------
 1 file changed, 19 insertions(+), 30 deletions(-)
tools/mgmt-tester.c +19 -30
index c0784dab5b64..b819bccbc7c0 100644
@@ -9445,7 +9445,7 @@ static const struct generic_data add_ext_advertising_conn_off_1m = {
 static const uint8_t get_phy_param[] = {
 	0xff, 0x7f, 0x00, 0x00,	/* All PHYs */
 	0xfe, 0x79,	0x00, 0x00, /* All PHYs except BR 1M 1SLOT, LE 1M TX & LE 1M RX */
-	0xff, 0x07, 0x00, 0x00, /* All BREDR PHYs and LE 1M TX & LE 1M RX */
+	0xff, 0x7f, 0x00, 0x00, /* All PHYs */
 };
 
 static const struct generic_data get_phy_success = {
@@ -9508,26 +9508,6 @@ static const uint8_t set_phy_all_param[] = {
 	0xff, 0x7f,	0x00, 0x00	/* All PHYs */
 };
 
-static const uint8_t set_default_phy_all_param[] = {
-	0x00, 		/* preference is there for tx and rx */
-	0x07,		/* 1m 2m coded tx */
-	0x07,		/* 1m 2m coded rx */
-};
-
-static const struct generic_data set_phy_all_success = {
-	.setup_settings = settings_powered_le,
-	.send_opcode = MGMT_OP_SET_PHY_CONFIGURATION,
-	.send_param = set_phy_all_param,
-	.send_len = sizeof(set_phy_all_param),
-	.expect_status = MGMT_STATUS_SUCCESS,
-	.expect_hci_command = BT_HCI_CMD_LE_SET_DEFAULT_PHY,
-	.expect_hci_param = set_default_phy_all_param,
-	.expect_hci_len = sizeof(set_default_phy_all_param),
-	.expect_alt_ev = MGMT_EV_PHY_CONFIGURATION_CHANGED,
-	.expect_alt_ev_param = set_phy_all_param,
-	.expect_alt_ev_len = sizeof(set_phy_all_param),
-};
-
 static const uint8_t set_phy_2m_tx_param[] = {
 	0xff, 0x0f,	0x00, 0x00	/* 1mtxrx, 2m tx */
 };
@@ -9635,10 +9615,13 @@ static const struct generic_data start_discovery_le_ext_scan_enable = {
 	.expect_alt_ev_len = sizeof(start_discovery_le_evt),
 };
 
-static const char start_discovery_valid_ext_scan_param[] = {
+static const char start_discovery_ext_scan_param[] = {
 	0x01,			/* Own Addr type*/
 	0x00,			/* Scan filter policy*/
-	0x01,			/*Phys - 1m */
+	0x05,			/* Phys - 1m and Coded*/
+	0x01,			/* Type */
+	0x12, 0x00,		/* Interval */
+	0x12, 0x00,		/* Window */
 	0x01,			/* Type */
 	0x12, 0x00,		/* Interval */
 	0x12, 0x00,		/* Window */
@@ -9653,8 +9636,8 @@ static const struct generic_data start_discovery_le_ext_scan_param = {
 	.expect_param = start_discovery_le_param,
 	.expect_len = sizeof(start_discovery_le_param),
 	.expect_hci_command = BT_HCI_CMD_LE_SET_EXT_SCAN_PARAMS,
-	.expect_hci_param = start_discovery_valid_ext_scan_param,
-	.expect_hci_len = sizeof(start_discovery_valid_ext_scan_param),
+	.expect_hci_param = start_discovery_ext_scan_param,
+	.expect_hci_len = sizeof(start_discovery_ext_scan_param),
 	.expect_alt_ev = MGMT_EV_DISCOVERING,
 	.expect_alt_ev_param = start_discovery_le_evt,
 	.expect_alt_ev_len = sizeof(start_discovery_le_evt),
@@ -9686,6 +9669,15 @@ static const struct generic_data stop_discovery_le_ext_scan_disable = {
 	.expect_alt_ev_len = sizeof(stop_discovery_evt),
 };
 
+static const char start_discovery_2m_ext_scan_param[] = {
+	0x01,			/* Own Addr type*/
+	0x00,			/* Scan filter policy*/
+	0x01,			/* Phys - 1m and Coded*/
+	0x01,			/* Type */
+	0x12, 0x00,		/* Interval */
+	0x12, 0x00,		/* Window */
+};
+
 static const struct generic_data start_discovery_le_2m_scan_param = {
 	.setup_settings = settings_powered_le,
 	.setup_send_opcode = MGMT_OP_SET_PHY_CONFIGURATION,
@@ -9698,8 +9690,8 @@ static const struct generic_data start_discovery_le_2m_scan_param = {
 	.expect_param = start_discovery_bredrle_param,
 	.expect_len = sizeof(start_discovery_bredrle_param),
 	.expect_hci_command = BT_HCI_CMD_LE_SET_EXT_SCAN_PARAMS,
-	.expect_hci_param = start_discovery_valid_ext_scan_param,
-	.expect_hci_len = sizeof(start_discovery_valid_ext_scan_param),
+	.expect_hci_param = start_discovery_2m_ext_scan_param,
+	.expect_hci_len = sizeof(start_discovery_2m_ext_scan_param),
 	.expect_alt_ev = MGMT_EV_DISCOVERING,
 	.expect_alt_ev_param = start_discovery_evt,
 	.expect_alt_ev_len = sizeof(start_discovery_evt),
@@ -14167,9 +14159,6 @@ int main(int argc, char *argv[])
 	test_bredrle50("Set PHY coded Succcess", &set_phy_coded_success,
 					NULL, test_command_generic);
 
-	test_bredrle50("Set PHY 1m 2m coded Succcess", &set_phy_all_success,
-					NULL, test_command_generic);
-
 	test_bredrle50("Set PHY 2m tx success", &set_phy_2m_tx_success,
 					NULL, test_command_generic);
 
Signature · 1 line
2.39.2
#1 lore raw
This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Fri, 7 Apr 2023 11:44:40 -0700 you wrote:

From: Luiz Augusto von Dentz <[email protected]>

This fixes the following tests now that all supported PHYs are enabled by default:

Start Discovery LE - (Ext Scan Param)   Failed
Get PHY Success                         Failed
Set PHY 1m 2m coded Succcess            Timed out

[...]

Here is the summary with links:
- [RESEND,BlueZ] mgmt-tester: Fix Get/Set PHY tests

    https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=e122a0708896

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
#2 lore raw
In reply to Luiz Augusto von Dentz

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=738056

---Test result---

Test Summary:

CheckPatch                    PASS      0.51 seconds
GitLint                       PASS      0.32 seconds
BuildEll                      PASS      35.49 seconds
BluezMake                     PASS      1217.63 seconds
MakeCheck                     PASS      12.86 seconds
MakeDistcheck                 PASS      188.02 seconds
CheckValgrind                 PASS      308.34 seconds
CheckSmatch                   PASS      434.04 seconds
bluezmakeextell               PASS      129.97 seconds
IncrementalBuild              PASS      1005.50 seconds
ScanBuild                     PASS      1356.40 seconds

---
Regards,
Linux Bluetooth