Skip to contentSkip to conversation

ARM: dts: hisilicon: Fix "status" values

PATCH Applied Rob Herring 2 participants 3 messages Jun 26, 2023 – Jul 19, 2023

Subsystems (2)
Device tree bindings Arm/HiSilicon SoC support
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 ARM: dts: hisilicon: Fix "status" values

The defined value for "status" is "disabled", not "disable".

Signed-off-by Rob Herring <[email protected]>
---
 arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
arch/arm/boot/dts/hisilicon/hi3519.dtsi +11 -11
index c524c854d319..a42b71cdc5d7 100644
@@ -54,7 +54,7 @@ uart0: serial@12100000 {
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {

@@ -63,7 +63,7 @@ uart1: serial@12101000 {
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {

@@ -72,7 +72,7 @@ uart2: serial@12102000 {
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {

@@ -81,7 +81,7 @@ uart3: serial@12103000 {
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {

@@ -90,7 +90,7 @@ uart4: serial@12104000 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {

@@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {

@@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {

@@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {

@@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {

@@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {

@@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {
Signature · 7 lines
2.40.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#1 lore raw
Quoted 7 lines · Rob Herring

The defined value for "status" is "disabled", not "disable".

Signed-off-by Rob Herring <[email protected]>
---
 arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Ping!

Quoted 107 lines
arch/arm/boot/dts/hisilicon/hi3519.dtsi +11 -12
index c524c854d319..a42b71cdc5d7 100644
@@ -54,7 +54,7 @@ uart0: serial@12100000 {
                        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
                        clock-names = "uartclk", "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                uart1: serial@12101000 {

@@ -63,7 +63,7 @@ uart1: serial@12101000 {
                        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
                        clock-names = "uartclk", "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                uart2: serial@12102000 {

@@ -72,7 +72,7 @@ uart2: serial@12102000 {
                        interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
                        clock-names = "uartclk", "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                uart3: serial@12103000 {

@@ -81,7 +81,7 @@ uart3: serial@12103000 {
                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
                        clock-names = "uartclk", "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                uart4: serial@12104000 {

@@ -90,7 +90,7 @@ uart4: serial@12104000 {
                        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
                        clock-names = "uartclk", "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                dual_timer0: timer@12000000 {

@@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
                        reg = <0x12000000 0x1000>;
                        clocks = <&clk_3m>;
                        clock-names = "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                dual_timer1: timer@12001000 {

@@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
                        reg = <0x12001000 0x1000>;
                        clocks = <&clk_3m>;
                        clock-names = "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                dual_timer2: timer@12002000 {

@@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
                        reg = <0x12002000 0x1000>;
                        clocks = <&clk_3m>;
                        clock-names = "apb_pclk";
-                       status = "disable";
+                       status = "disabled";
                };
 
                spi_bus0: spi@12120000 {

@@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
                        num-cs = <1>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       status = "disable";
+                       status = "disabled";
                };
 
                spi_bus1: spi@12121000 {

@@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
                        num-cs = <1>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       status = "disable";
+                       status = "disabled";
                };
 
                spi_bus2: spi@12122000 {

@@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
                        num-cs = <1>;
                        #address-cells = <1>;
                        #size-cells = <0>;
-                       status = "disable";
+                       status = "disabled";
                };
 
                sysctrl: system-controller@12020000 {
--

2.40.1

maintainer Applied
#2 lore raw
In reply to Rob Herring

Hi Rob,

Quoted 3 lines · Rob Herring

The defined value for "status" is "disabled", not "disable".

Signed-off-by Rob Herring <[email protected]>

Applied to the HiSilicon arm32 dt tree.
Thanks!

Best Regards,
Wei

Quoted 100 lines
---
 arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
arch/arm/boot/dts/hisilicon/hi3519.dtsi +10 -10
index c524c854d319..a42b71cdc5d7 100644
@@ -54,7 +54,7 @@ uart0: serial@12100000 {
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {

@@ -63,7 +63,7 @@ uart1: serial@12101000 {
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {

@@ -72,7 +72,7 @@ uart2: serial@12102000 {
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {

@@ -81,7 +81,7 @@ uart3: serial@12103000 {
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {

@@ -90,7 +90,7 @@ uart4: serial@12104000 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {

@@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {

@@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {

@@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {

@@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {

@@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {

arch/arm/boot/dts/hisilicon/hi3519.dtsi spi_bus2: spi@12122000 { · line 162

Quoted 8 lines
arch/arm/boot/dts/hisilicon/hi3519.dtsi +1 -1
@@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel