x86 fixes
Subsystems (6)
Linus,
Please pull the latest x86-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-fixes-for-linus
out-of-topic modifications in x86-fixes-for-linus:
--------------------------------------------------include/asm-generic/pgtable.h # e104ba3: x86 PAT: change track_pfn_vma_newmm/memory.c # e104ba3: x86 PAT: change track_pfn_vma_new
# e61304a: x86 PAT: remove PFNMAP type on tr
Thanks,
Ingo
------------------>
Andi Kleen (2):
x86: hpet: allow force enable on ICH10 HPET
x86: avoid theoretical vmalloc fault loop
Jaswinder Singh Rajput (1):
x86: fix mpparse.c build error on latest git
Kyle McMartin (1):
x86, mtrr: fix types used in userspace exported header
Suresh Siddha (1):
x86, pat: fix reserve_memtype() for legacy 1MB range
[email protected] (6):
x86 PAT: remove PFNMAP type on track_pfn_vma_new() error x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param x86 PAT: return compatible mapping to remap_pfn_range callers x86 PAT: ioremap_wc should take resource_size_t parameter x86 PAT: remove CPA WARN_ON for zero pte
arch/x86/include/asm/io.h | 2 +- arch/x86/include/asm/mtrr.h | 10 ++-- arch/x86/include/asm/pgtable.h | 19 +++++++ arch/x86/kernel/mpparse.c | 1 + arch/x86/kernel/quirks.c | 3 +- arch/x86/mm/fault.c | 2 +- arch/x86/mm/ioremap.c | 2 +- arch/x86/mm/pageattr.c | 10 ++-- arch/x86/mm/pat.c | 109 +++++++++++++++++++++++++++------------ arch/x86/pci/i386.c | 12 +---- include/asm-generic/pgtable.h | 4 +- mm/memory.c | 15 ++++-- 12 files changed, 125 insertions(+), 64 deletions(-)
arch/x86/include/asm/io.h +1 -1
@@ -91,7 +91,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);extern int ioremap_change_attr (unsigned long vaddr,unsigned long size,unsigned long prot_val); -extern void __iomem *ioremap_wc (unsigned long offset,unsigned long size); +extern void __iomem *ioremap_wc (resource_size_t offset,unsigned long size);/* * early_ioremap() and early_iounmap() are for temporary early boot-time
arch/x86/include/asm/mtrr.h +5 -5
@@ -58,15 +58,15 @@ struct mtrr_gentry {#endif /* !__i386__ */ struct mtrr_var_range { -u32 base_lo; -u32 base_hi; -u32 mask_lo; -u32 mask_hi; +__u32 base_lo; +__u32 base_hi; +__u32 mask_lo; +__u32 mask_hi; };/* In the Intel processor's MTRR interface, the MTRR type is always held in an 8 bit field: */ -typedef u8 mtrr_type ; +typedef __u8 mtrr_type ;#define MTRR_NUM_FIXED_RANGES 88#define MTRR_MAX_VAR_RANGES 256
arch/x86/include/asm/pgtable.h +19 -0
@@ -341,6 +341,25 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)#define canon_pgprot (p) __pgprot(pgprot_val(p) & __supported_pte_mask) +static inline int is_new_memtype_allowed (unsigned long flags, +unsigned long new_flags) +{ +/* +* Certain new memtypes are not allowed with certain +* requested memtype: +* - request is uncached, return cannot be write-back +* - request is write-combine, return cannot be write-back +*/ +if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { +return 0 ; + } + +return 1 ; +} +#ifndef __ASSEMBLY__/* Indicate that x86 has its own track and untrack pfn vma functions */ #define __HAVE_PFNMAP_TRACKING
arch/x86/kernel/mpparse.c +1 -0
@@ -27,6 +27,7 @@#include <asm/e820.h> #include <asm/trampoline.h> #include <asm/setup.h> +#include <asm/smp.h> #include <mach_apic.h> #ifdef CONFIG_X86_32
arch/x86/kernel/quirks.c +2 -1
@@ -172,7 +172,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, ich_force_enable_hpet);DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,PCI_DEVICE_ID_INTEL_ICH9_7 , ich_force_enable_hpet); - +DECLARE_PCI_FIXUP_HEADER (PCI_VENDOR_ID_INTEL ,0x3a16 ,/* ICH10 */ + ich_force_enable_hpet);static struct pci_dev *cached_dev;
arch/x86/mm/fault.c +1 -1
@@ -534,7 +534,7 @@ static int vmalloc_fault(unsigned long address)happen within a race in page table update. In the later case just flush. */ - pgd =pgd_offset (current->mm ?: &init_mm, address); + pgd =pgd_offset (current->active_mm, address); pgd_ref =pgd_offset_k (address);if (pgd_none (*pgd_ref))return -1 ;
arch/x86/mm/ioremap.c +1 -1
@@ -367,7 +367,7 @@ EXPORT_SYMBOL(ioremap_nocache);* * Must be freed with iounmap. */ -void __iomem *ioremap_wc (unsigned long phys_addr,unsigned long size) +void __iomem *ioremap_wc (resource_size_t phys_addr,unsigned long size) {if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
arch/x86/mm/pageattr.c +6 -4
@@ -555,10 +555,12 @@ repeat:if (!pte_val (old_pte)) {if (!primary)return 0 ; -WARN (1 ,KERN_WARNING "CPA: called for zero pte. " -"vaddr = %lx cpa->vaddr = %lx\n" , address, - *cpa->vaddr); -return -EINVAL ; + +/* +* Special error value returned, indicating that the mapping +* did not exist at this address. +*/ +return -EFAULT ; }if (level ==PG_LEVEL_4K ) {
arch/x86/mm/pat.c +75 -34
180 lines not on this page · raw message
arch/x86/pci/i386.c +1 -11
@@ -314,17 +314,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,return retval;if (flags != new_flags) { -/* -* Do not fallback to certain memory types with certain -* requested type: -* - request is uncached, return cannot be write-back -* - request is uncached, return cannot be write-combine -* - request is write-combine, return cannot be write-back -*/ -if ((flags == _PAGE_CACHE_UC_MINUS && - (new_flags == _PAGE_CACHE_WB)) || - (flags == _PAGE_CACHE_WC && - new_flags == _PAGE_CACHE_WB)) { +if (!is_new_memtype_allowed (flags, new_flags)) {free_memtype (addr, addr+len);return -EINVAL ; }
include/asm-generic/pgtable.h +2 -2
@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,* track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {return 0 ;
@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { }#else -extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size);extern int track_pfn_vma_copy (struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
mm/memory.c +11 -4
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) {int ret; +pgprot_t pgprot = vma->vm_page_prot;/* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,if (addr < vma->vm_start || addr >= vma->vm_end)return -EFAULT ; -if (track_pfn_vma_new (vma, vma->vm_page_prot, pfn,PAGE_SIZE )) +if (track_pfn_vma_new (vma, &pgprot, pfn,PAGE_SIZE ))return -EINVAL ; - ret =insert_pfn (vma, addr, pfn, vma->vm_page_prot); + ret =insert_pfn (vma, addr, pfn, pgprot);if (ret)untrack_pfn_vma (vma, pfn,PAGE_SIZE );
@@ -1671,9 +1672,15 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; - err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); -if (err) + err =track_pfn_vma_new (vma, &prot, pfn,PAGE_ALIGN (size)); +if (err) { +/* +* To indicate that track_pfn related cleanup is not +* needed from higher level routine calling unmap_vmas +*/ + vma->vm_flags &= ~(VM_IO |VM_RESERVED |VM_PFNMAP );return -EINVAL ; + }BUG_ON (addr >= end); pfn -= addr >>PAGE_SHIFT ;
Quoted 31 lines · Ingo Molnar
Linus,
Please pull the latest x86-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitx86-fixes-for-linusout-of-topic modifications in x86-fixes-for-linus:
--------------------------------------------------include/asm-generic/pgtable.h# e104ba3: x86 PAT: changetrack_pfn_vma_newmm/memory.c# e104ba3: x86 PAT: changetrack_pfn_vma_new
# e61304a: x86 PAT: remove PFNMAP type on trThanks,
Ingo
------------------>
Andi Kleen (2):
x86: hpet: allow force enable on ICH10 HPET
x86: avoid theoretical vmalloc fault loopJaswinder Singh Rajput (1):
x86: fixmpparse.cbuild error on latest gitKyle McMartin (1):
x86, mtrr: fix types used in userspace exported headerSuresh Siddha (1):
x86, pat: fixreserve_memtype()for legacy 1MB range
Quoted 7 lines
[email protected] (6):
x86 PAT: remove PFNMAP type ontrack_pfn_vma_new()error x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: changetrack_pfn_vma_newto takepgprot_tpointer param x86 PAT: return compatible mapping toremap_pfn_rangecallers x86 PAT:ioremap_wcshould takeresource_size_tparameter x86 PAT: remove CPAWARN_ONfor zero pte
Something is (very) wrong with one(?) of these patches.
After upgrading from 2.6.28 to 2.6.29-rc1 I lost direct rendering. Each time I tried to start a program that uses DRM I get this in the syslog and the programm falls back to mesa software rendering:
Jan 11 13:32:31 treogen [ 77.167977] X:3280 map pfn expected mapping type uncached-min us for e0000000-e7ff8000, got write-combining Jan 11 13:32:31 treogen [ 77.173620] X:3280 freeing invalid memtype e0000000-e7ff8000 Jan 11 13:34:51 treogen [ 217.861668] glxinfo:3492 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:34:51 treogen [ 217.867220] glxinfo:3492 freeing invalid memtype e0000000-e7f f8000 Jan 11 13:35:23 treogen [ 249.771043] glxinfo:3494 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:35:23 treogen [ 249.776589] glxinfo:3494 freeing invalid
memtype e0000000-e7f
f8000
Otherwise 2.6.29-rc1 worked for me. Even booting with 'fastboot' did not result in any problems, but it did cut the in-kernel-time down from ~12 sec to ~6 sec.
Hoping to fix this memtype problem I applied the patch from the pull request to 29-rc1 and rebooted. Now the system completely locks up when X is trying to start.
Via serial console I got this Oops:
[ 79.500149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 [ 79.509240] IP: [<0000000000000003>] 0x3 [ 79.510002] PGD 0 [ 79.510002] Oops: 0010 [#1] SMP [ 79.510002] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 79.510002] CPU 0 [ 79.510002] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 usbhid videobuf_dma_sg videobuf_core hid btcx_risc tveeprom sg pata_amd
[ 79.510002] Pid: 0, comm: swapper Not tainted 2.6.29-rc1 #2 [ 79.510002] RIP: 0010:[<0000000000000003>] [<0000000000000003>] 0x3 [ 79.510002] RSP: 0018:ffffffff809a8b18 EFLAGS: 00010002 [ 79.510002] RAX: 0000000000000001 RBX: ffffffff00000000 RCX: 0000000000000000 [ 79.510002] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff809a8ca8 [ 79.510002] RBP: ffffffff809a8b18 R08: 0000000000000001 R09: 0000000000000100 [ 79.510002] R10: ffffffff8026af40 R11: 00000000000068d8 R12: 0000000000000000 [ 79.510002] R13: ffff88007e4fd700 R14: ffff880028018d00 R15: ffffffff809a8aa8 [ 79.510002] FS: 00007ff217e406f0(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 79.510002] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 79.510002] CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0 [ 79.510002] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 79.510002] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 79.510002] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 79.510002] Stack: [ 79.510002] ffffffff809a8b68 ffffffff802389d7 0000000000000000 ffffffff809a8b60 [ 79.510002] 0000000000000082 ffffffff8022a7a8 0000000000000000 0000000000000001 [ 79.510002] 0000000000000060 ffffffff807de360 ffffffff809a8b78 ffffffff80238b7d [ 79.510002] Call Trace: [ 79.510002] Call Trace: [ 79.510002] <IRQ> <0> [<ffffffff802389d7>] try_to_wake_up+0x137/0x2d0 [ 79.510002] [<ffffffff8022a7a8>] ? do_page_fault+0x368/0x970 [ 79.510002] [<ffffffff80238b7d>] default_wake_function+0xd/0x10 [ 79.510002] [<ffffffff8025a751>] autoremove_wake_function+0x11/0x40 [ 79.510002] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 79.510002] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8024402c>] ? warn_slowpath+0x4c/0x130 [ 79.510002] [<ffffffff804b8f85>] ? scsi_next_command+0x45/0x60 [ 79.510002] [<ffffffff804b9bd6>] ? scsi_io_completion+0x376/0x4e0 [ 79.510002] [<ffffffff804b2f6c>] ? scsi_finish_command+0xac/0xe0 [ 79.510002] [<ffffffff804b9e08>] ? scsi_softirq_done+0xb8/0x140 [ 79.510002] [<ffffffff8025d360>] ? __remove_hrtimer+0x40/0xa0 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 79.510002] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 79.510002] <EOI> <0>Code: Bad RIP value. [ 79.510002] RIP [<0000000000000003>] 0x3 [ 79.510002] RSP <ffffffff809a8b18> [ 79.510002] CR2: 0000000000000003 [ 79.510002] ---[ end trace 99e686e29f771a49 ]--- [ 79.510002] Kernel panic - not syncing: Fatal exception in interrupt [ 79.510002] ------------[ cut here ]------------
last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable
lspci -t:
-[0000:00]-+-00.0
[snip]
+-0f.0-[0000:01]--+-00.0
| \-00.1lspci:
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
Userspace is xorg-server-1.5.3 with mesa-7.3_rc1 and xf86-video-ati-6.9.0. With 2.6.28 this combination works for accelerated direct rendering. PAT was enabled on 2.6.28 and both vanilla 2.6.29-rc1 and the patched -rc1.
Just ask, if you need more information, or if you have a patch to try.
Torsten
Quoted 136 lines · Torsten Kaiser
Quoted 31 lines · Ingo Molnar
Linus,
Please pull the latest x86-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitx86-fixes-for-linusout-of-topic modifications in x86-fixes-for-linus:
--------------------------------------------------include/asm-generic/pgtable.h# e104ba3: x86 PAT: changetrack_pfn_vma_newmm/memory.c# e104ba3: x86 PAT: changetrack_pfn_vma_new
# e61304a: x86 PAT: remove PFNMAP type on trThanks,
Ingo
------------------>
Andi Kleen (2):
x86: hpet: allow force enable on ICH10 HPET
x86: avoid theoretical vmalloc fault loopJaswinder Singh Rajput (1):
x86: fixmpparse.cbuild error on latest gitKyle McMartin (1):
x86, mtrr: fix types used in userspace exported headerSuresh Siddha (1):
x86, pat: fixreserve_memtype()for legacy 1MB rangeQuoted 7 lines
[email protected] (6):
x86 PAT: remove PFNMAP type ontrack_pfn_vma_new()error x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: changetrack_pfn_vma_newto takepgprot_tpointer param x86 PAT: return compatible mapping toremap_pfn_rangecallers x86 PAT:ioremap_wcshould takeresource_size_tparameter x86 PAT: remove CPAWARN_ONfor zero pteSomething is (very) wrong with one(?) of these patches.
After upgrading from 2.6.28 to 2.6.29-rc1 I lost direct rendering. Each time I tried to start a program that uses DRM I get this in the syslog and the programm falls back to mesa software rendering:
Jan 11 13:32:31 treogen [ 77.167977] X:3280 map pfn expected mapping type uncached-min us for e0000000-e7ff8000, got write-combining Jan 11 13:32:31 treogen [ 77.173620] X:3280 freeing invalid memtype e0000000-e7ff8000 Jan 11 13:34:51 treogen [ 217.861668] glxinfo:3492 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:34:51 treogen [ 217.867220] glxinfo:3492 freeing invalid memtype e0000000-e7f f8000 Jan 11 13:35:23 treogen [ 249.771043] glxinfo:3494 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:35:23 treogen [ 249.776589] glxinfo:3494 freeing invalidmemtype e0000000-e7f
f8000Otherwise 2.6.29-rc1 worked for me. Even booting with 'fastboot' did not result in any problems, but it did cut the in-kernel-time down from ~12 sec to ~6 sec.
Hoping to fix this memtype problem I applied the patch from the pull request to 29-rc1 and rebooted. Now the system completely locks up when X is trying to start.
Via serial console I got this Oops:[ 79.500149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 [ 79.509240] IP: [<0000000000000003>] 0x3 [ 79.510002] PGD 0 [ 79.510002] Oops: 0010 [#1] SMP [ 79.510002] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 79.510002] CPU 0 [ 79.510002] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028xc5000 tda9887tuner_simpletuner_typesmt20xx tea5761 tvaudio msp3400 bttvir_commonv4l2_commonvideodevv4l1_compatv4l2_compat_ioctl32usbhidvideobuf_dma_sgvideobuf_corehidbtcx_risctveeprom sgpata_amd[ 79.510002] Pid: 0, comm: swapper Not tainted 2.6.29-rc1 #2 [ 79.510002] RIP: 0010:[<0000000000000003>] [<0000000000000003>] 0x3 [ 79.510002] RSP: 0018:ffffffff809a8b18 EFLAGS: 00010002 [ 79.510002] RAX: 0000000000000001 RBX: ffffffff00000000 RCX: 0000000000000000 [ 79.510002] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff809a8ca8 [ 79.510002] RBP: ffffffff809a8b18 R08: 0000000000000001 R09: 0000000000000100 [ 79.510002] R10: ffffffff8026af40 R11: 00000000000068d8 R12: 0000000000000000 [ 79.510002] R13: ffff88007e4fd700 R14: ffff880028018d00 R15: ffffffff809a8aa8 [ 79.510002] FS: 00007ff217e406f0(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 79.510002] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 79.510002] CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0 [ 79.510002] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 79.510002] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 79.510002] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 79.510002] Stack: [ 79.510002] ffffffff809a8b68 ffffffff802389d7 0000000000000000 ffffffff809a8b60 [ 79.510002] 0000000000000082 ffffffff8022a7a8 0000000000000000 0000000000000001 [ 79.510002] 0000000000000060 ffffffff807de360 ffffffff809a8b78 ffffffff80238b7d [ 79.510002] Call Trace: [ 79.510002] Call Trace: [ 79.510002] <IRQ> <0> [<ffffffff802389d7>] try_to_wake_up+0x137/0x2d0 [ 79.510002] [<ffffffff8022a7a8>] ? do_page_fault+0x368/0x970 [ 79.510002] [<ffffffff80238b7d>] default_wake_function+0xd/0x10 [ 79.510002] [<ffffffff8025a751>] autoremove_wake_function+0x11/0x40 [ 79.510002] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 79.510002] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8024402c>] ? warn_slowpath+0x4c/0x130 [ 79.510002] [<ffffffff804b8f85>] ? scsi_next_command+0x45/0x60 [ 79.510002] [<ffffffff804b9bd6>] ? scsi_io_completion+0x376/0x4e0 [ 79.510002] [<ffffffff804b2f6c>] ? scsi_finish_command+0xac/0xe0 [ 79.510002] [<ffffffff804b9e08>] ? scsi_softirq_done+0xb8/0x140 [ 79.510002] [<ffffffff8025d360>] ? __remove_hrtimer+0x40/0xa0 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30
Quoted 8 lines
[ 79.510002] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 79.510002] <EOI> <0>Code: Bad RIP value. [ 79.510002] RIP [<0000000000000003>] 0x3 [ 79.510002] RSP <ffffffff809a8b18> [ 79.510002] CR2: 0000000000000003 [ 79.510002] ---[ end trace 99e686e29f771a49 ]--- [ 79.510002] Kernel panic - not syncing: Fatal exception in interrupt [ 79.510002] ------------[ cut here ]------------
hm, that looks really nasty crash - Linus, you might want to defer this pull. The PAT folks Cc:-ed.
Ingo
Quoted 190 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Torsten Kaiser
Sent: Sunday, January 11, 2009 8:45 AM
To: Ingo Molnar
Cc: Linus Torvalds; [email protected]; Andrew Morton; Thomas Gleixner; H. Peter Anvin
Subject: Re: [git pull] x86 fixesQuoted 6 lines · Ingo Molnar
Linus,
Please pull the latest x86-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
.git x86-fixes-for-linusQuoted 4 lines
out-of-topic modifications in x86-fixes-for-linus:
--------------------------------------------------include/asm-generic/pgtable.h# e104ba3: x86 PAT:change
track_pfn_vma_newQuoted 1 line
mm/memory.c# e104ba3: x86 PAT:change
track_pfn_vma_newQuoted 1 line
# e61304a: x86 PAT: removePFNMAP type on tr
Quoted 16 lines
Thanks,
Ingo
------------------>
Andi Kleen (2):
x86: hpet: allow force enable on ICH10 HPET
x86: avoid theoretical vmalloc fault loopJaswinder Singh Rajput (1):
x86: fixmpparse.cbuild error on latest gitKyle McMartin (1):
x86, mtrr: fix types used in userspace exported headerQuoted 6 lines
Suresh Siddha (1):
x86, pat: fixreserve_memtype()for legacy 1MB range[email protected] (6):
x86 PAT: remove PFNMAP type ontrack_pfn_vma_new()error x86 PAT: consolidate old memtype new memtype check intoa function
Quoted 4 lines
x86 PAT: change
track_pfn_vma_newto takepgprot_tpointer param x86 PAT: return compatible mapping toremap_pfn_rangecallers x86 PAT:ioremap_wcshould takeresource_size_tparameter x86 PAT: remove CPAWARN_ONfor zero pteSomething is (very) wrong with one(?) of these patches.
After upgrading from 2.6.28 to 2.6.29-rc1 I lost direct rendering. Each time I tried to start a program that uses DRM I get this in the syslog and the programm falls back to mesa software rendering:
Jan 11 13:32:31 treogen [ 77.167977] X:3280 map pfn expected mapping type uncached-min us for e0000000-e7ff8000, got write-combining Jan 11 13:32:31 treogen [ 77.173620] X:3280 freeing invalid memtype e0000000-e7ff8000 Jan 11 13:34:51 treogen [ 217.861668] glxinfo:3492 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:34:51 treogen [ 217.867220] glxinfo:3492 freeing invalid memtype e0000000-e7f f8000 Jan 11 13:35:23 treogen [ 249.771043] glxinfo:3494 map pfn expected mapping type uncach ed-minus for e0000000-e7ff8000, got write-combining Jan 11 13:35:23 treogen [ 249.776589] glxinfo:3494 freeing invalidmemtype e0000000-e7f
f8000Otherwise 2.6.29-rc1 worked for me. Even booting with 'fastboot' did not result in any problems, but it did cut the in-kernel-time down from ~12 sec to ~6 sec.
Hoping to fix this memtype problem I applied the patch from the pull request to 29-rc1 and rebooted. Now the system completely locks up when X is trying to start.
Via serial console I got this Oops:[ 79.500149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 [ 79.509240] IP: [<0000000000000003>] 0x3 [ 79.510002] PGD 0 [ 79.510002] Oops: 0010 [#1] SMP [ 79.510002] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 79.510002] CPU 0 [ 79.510002] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028xc5000 tda9887tuner_simpletuner_typesmt20xx tea5761 tvaudio msp3400 bttvir_commonv4l2_commonvideodevv4l1_compatv4l2_compat_ioctl32usbhidvideobuf_dma_sgvideobuf_corehidbtcx_risctveeprom sgpata_amd[ 79.510002] Pid: 0, comm: swapper Not tainted 2.6.29-rc1 #2 [ 79.510002] RIP: 0010:[<0000000000000003>] [<0000000000000003>] 0x3 [ 79.510002] RSP: 0018:ffffffff809a8b18 EFLAGS: 00010002 [ 79.510002] RAX: 0000000000000001 RBX: ffffffff00000000 RCX: 0000000000000000 [ 79.510002] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff809a8ca8 [ 79.510002] RBP: ffffffff809a8b18 R08: 0000000000000001 R09: 0000000000000100 [ 79.510002] R10: ffffffff8026af40 R11: 00000000000068d8 R12: 0000000000000000 [ 79.510002] R13: ffff88007e4fd700 R14: ffff880028018d00 R15: ffffffff809a8aa8 [ 79.510002] FS: 00007ff217e406f0(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 79.510002] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 79.510002] CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0 [ 79.510002] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 79.510002] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 79.510002] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 79.510002] Stack: [ 79.510002] ffffffff809a8b68 ffffffff802389d7 0000000000000000 ffffffff809a8b60 [ 79.510002] 0000000000000082 ffffffff8022a7a8 0000000000000000 0000000000000001 [ 79.510002] 0000000000000060 ffffffff807de360 ffffffff809a8b78 ffffffff80238b7d [ 79.510002] Call Trace: [ 79.510002] Call Trace: [ 79.510002] <IRQ> <0> [<ffffffff802389d7>] try_to_wake_up+0x137/0x2d0 [ 79.510002] [<ffffffff8022a7a8>] ? do_page_fault+0x368/0x970 [ 79.510002] [<ffffffff80238b7d>] default_wake_function+0xd/0x10 [ 79.510002] [<ffffffff8025a751>] autoremove_wake_function+0x11/0x40 [ 79.510002] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 79.510002] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8024402c>] ? warn_slowpath+0x4c/0x130 [ 79.510002] [<ffffffff804b8f85>] ? scsi_next_command+0x45/0x60 [ 79.510002] [<ffffffff804b9bd6>] ? scsi_io_completion+0x376/0x4e0 [ 79.510002] [<ffffffff804b2f6c>] ? scsi_finish_command+0xac/0xe0 [ 79.510002] [<ffffffff804b9e08>] ? scsi_softirq_done+0xb8/0x140 [ 79.510002] [<ffffffff8025d360>] ? __remove_hrtimer+0x40/0xa0 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 79.510002] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 79.510002] <EOI> <0>Code: Bad RIP value. [ 79.510002] RIP [<0000000000000003>] 0x3 [ 79.510002] RSP <ffffffff809a8b18> [ 79.510002] CR2: 0000000000000003 [ 79.510002] ---[ end trace 99e686e29f771a49 ]--- [ 79.510002] Kernel panic - not syncing: Fatal exception in interrupt [ 79.510002] ------------[ cut here ]------------last sysfs file:
/sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enablelspci -t:
-[0000:00]-+-00.0[snip] +-0f.0-[0000:01]--+-00.0 | \-00.1lspci:
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
Quoted 8 lines
Userspace is xorg-server-1.5.3 with mesa-7.3_rc1 and xf86-video-ati-6.9.0.
With 2.6.28 this combination works for accelerated direct rendering. PAT was enabled on 2.6.28 and both vanilla 2.6.29-rc1 and the patched -rc1.Just ask, if you need more information, or if you have a patch to try.
Torsten,
I don't seem to be able to reproduce this failure on my test systems.. What distribution are you using here? Can you send me the kernel config that you used.
Thanks,
Venki
Quoted 90 lines · Venkatesh
Quoted 82 lines
Hoping to fix this memtype problem I applied the patch from the pull request to 29-rc1 and rebooted. Now the system completely locks up when X is trying to start.
Via serial console I got this Oops:[ 79.500149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 [ 79.509240] IP: [<0000000000000003>] 0x3 [ 79.510002] PGD 0 [ 79.510002] Oops: 0010 [#1] SMP [ 79.510002] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 79.510002] CPU 0 [ 79.510002] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028xc5000 tda9887tuner_simpletuner_typesmt20xx tea5761 tvaudio msp3400 bttvir_commonv4l2_commonvideodevv4l1_compatv4l2_compat_ioctl32usbhidvideobuf_dma_sgvideobuf_corehidbtcx_risctveeprom sgpata_amd[ 79.510002] Pid: 0, comm: swapper Not tainted 2.6.29-rc1 #2 [ 79.510002] RIP: 0010:[<0000000000000003>] [<0000000000000003>] 0x3 [ 79.510002] RSP: 0018:ffffffff809a8b18 EFLAGS: 00010002 [ 79.510002] RAX: 0000000000000001 RBX: ffffffff00000000 RCX: 0000000000000000 [ 79.510002] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff809a8ca8 [ 79.510002] RBP: ffffffff809a8b18 R08: 0000000000000001 R09: 0000000000000100 [ 79.510002] R10: ffffffff8026af40 R11: 00000000000068d8 R12: 0000000000000000 [ 79.510002] R13: ffff88007e4fd700 R14: ffff880028018d00 R15: ffffffff809a8aa8 [ 79.510002] FS: 00007ff217e406f0(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 79.510002] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 79.510002] CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0 [ 79.510002] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 79.510002] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 79.510002] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 79.510002] Stack: [ 79.510002] ffffffff809a8b68 ffffffff802389d7 0000000000000000 ffffffff809a8b60 [ 79.510002] 0000000000000082 ffffffff8022a7a8 0000000000000000 0000000000000001 [ 79.510002] 0000000000000060 ffffffff807de360 ffffffff809a8b78 ffffffff80238b7d [ 79.510002] Call Trace: [ 79.510002] Call Trace: [ 79.510002] <IRQ> <0> [<ffffffff802389d7>] try_to_wake_up+0x137/0x2d0 [ 79.510002] [<ffffffff8022a7a8>] ? do_page_fault+0x368/0x970 [ 79.510002] [<ffffffff80238b7d>] default_wake_function+0xd/0x10 [ 79.510002] [<ffffffff8025a751>] autoremove_wake_function+0x11/0x40 [ 79.510002] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 79.510002] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8026af40>] ? generic_smp_call_function_interrupt+0x0/0x100 [ 79.510002] [<ffffffff8024402c>] ? warn_slowpath+0x4c/0x130 [ 79.510002] [<ffffffff804b8f85>] ? scsi_next_command+0x45/0x60 [ 79.510002] [<ffffffff804b9bd6>] ? scsi_io_completion+0x376/0x4e0 [ 79.510002] [<ffffffff804b2f6c>] ? scsi_finish_command+0xac/0xe0 [ 79.510002] [<ffffffff804b9e08>] ? scsi_softirq_done+0xb8/0x140 [ 79.510002] [<ffffffff8025d360>] ? __remove_hrtimer+0x40/0xa0 [ 79.510002] [<ffffffff8026b02c>] ? generic_smp_call_function_interrupt+0xec/0x100 [ 79.510002] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 79.510002] [<ffffffff8020c863>] ?Quoted 8 lines
call_function_interrupt+0x13/0x20[ 79.510002] <EOI> <0>Code: Bad RIP value. [ 79.510002] RIP [<0000000000000003>] 0x3 [ 79.510002] RSP <ffffffff809a8b18> [ 79.510002] CR2: 0000000000000003 [ 79.510002] ---[ end trace 99e686e29f771a49 ]--- [ 79.510002] Kernel panic - not syncing: Fatal exception in interrupt [ 79.510002] ------------[ cut here ]------------
Quoted 4 lines
Torsten,
I don't seem to be able to reproduce this failure on my test systems.. What distribution are you using here? Can you send me the kernel config that you used.
I'm using Gentoo, the compiler is:
gcc (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) 4.3.2
The system has 2x 2218 Opterons with 4GB of RAM, so it a NUMA system with 2 nodes.
What might be important is, that I switched to the new TREE_RCU:
# CONFIG_CLASSIC_RCU is not setCONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=4
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
Rest of the .config is attached. I used the same .config for the vanilla 2.6.29-rc1 that worked apart from the DRM trouble that was also reported by others and the version patched with these fixes.
HTH
Torsten
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc1
# Sun Jan 11 11:28:32 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=yCONFIG_X86_SMP=yCONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_BIOS_REBOOT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
#
# Control Group support
#
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=yCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=mCONFIG_IOSCHED_DEADLINE=mCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_CLASSIC_RCU is not setCONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not setCONFIG_RCU_FANOUT=4
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=yCONFIG_SPARSE_IRQ=y CONFIG_NUMA_MIGRATE_IRQ_DESC=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=yCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not setCONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set CONFIG_X86_MSR=yCONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=y
# CONFIG_K8_NUMA is not set CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=9 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set # CONFIG_X86_RESERVE_LOW_64K is not set CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not setCONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not setCONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not setCONFIG_ACPI_BUTTON=yCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not setCONFIG_X86_POWERNOW_K8=yCONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=yCONFIG_DMAR=y
# CONFIG_DMAR_GFX_WA is not setCONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not setCONFIG_PCIEPORTBUS=yCONFIG_PCIEAER=yCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#
# CONFIG_NET_NS is not setCONFIG_COMPAT_NET_DEV_OPS=yCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not setCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=mCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=mCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not setCONFIG_DEFAULT_RENO=yCONFIG_DEFAULT_TCP_CONG="reno"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not setCONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=mCONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_DCCP=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_PROTO_UDPLITE=mCONFIG_NF_NAT_PROTO_SCTP=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_TFTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_NF_NAT_SIP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not setCONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not setCONFIG_NET_CLS_ROUTE=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not setCONFIG_WIRELESS=yCONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not setCONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=mCONFIG_MAC80211=m
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not setCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=mCONFIG_RFKILL_INPUT=mCONFIG_RFKILL_LEDS=yCONFIG_NET_9P=m
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not setCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not setCONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
# CONFIG_C2PORT is not setCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not setCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not setCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not setCONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not setCONFIG_MD_RAID456=yCONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not setCONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not setCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=mCONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_I2O=yCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not setCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not setCONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not setCONFIG_MII=mCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not setCONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=yCONFIG_STRIP=mCONFIG_WLAN_80211=yCONFIG_LIBERTAS=mCONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not setCONFIG_AIRO=mCONFIG_HERMES=mCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=mCONFIG_NORTEL_HERMES=mCONFIG_PCI_HERMES=mCONFIG_ATMEL=mCONFIG_PCI_ATMEL=mCONFIG_PRISM54=mCONFIG_USB_ZD1201=mCONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_RTL8180 is not setCONFIG_RTL8187=mCONFIG_ADM8211=m
# CONFIG_MAC80211_HWSIM is not setCONFIG_P54_COMMON=mCONFIG_P54_USB=m
# CONFIG_P54_PCI is not setCONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not setCONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not setCONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not setCONFIG_IWLWIFI=mCONFIG_IWLCORE=mCONFIG_IWLWIFI_LEDS=y
# CONFIG_IWLWIFI_RFKILL is not set
# CONFIG_IWLWIFI_DEBUG is not setCONFIG_IWLAGN=m
# CONFIG_IWLAGN_SPECTRUM_MEASUREMENT is not setCONFIG_IWLAGN_LEDS=yCONFIG_IWL4965=yCONFIG_IWL5000=yCONFIG_IWL3945=m
# CONFIG_IWL3945_RFKILL is not setCONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
# CONFIG_IWL3945_LEDS is not set
# CONFIG_IWL3945_DEBUG is not setCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=yCONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_B43=mCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=yCONFIG_B43_LEDS=yCONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not setCONFIG_B43LEGACY=mCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG is not setCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not setCONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not setCONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not setCONFIG_RT2500USB=mCONFIG_RT73USB=mCONFIG_RT2X00_LIB_USB=mCONFIG_RT2X00_LIB=mCONFIG_RT2X00_LIB_FIRMWARE=yCONFIG_RT2X00_LIB_CRYPTO=yCONFIG_RT2X00_LIB_RFKILL=yCONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_SMSC95XX=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_HSO=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOL2TP=m
# CONFIG_SLIP is not setCONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=yCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=1CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_NVRAM is not setCONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not setCONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=m
#
# SPI Protocol Masters
#CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not setCONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not setCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not setCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not setCONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not setCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not setCONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not setCONFIG_MEDIA_TUNER_SIMPLE=mCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA9887=mCONFIG_MEDIA_TUNER_TEA5761=mCONFIG_MEDIA_TUNER_TEA5767=mCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_XC2028=mCONFIG_MEDIA_TUNER_XC5000=mCONFIG_VIDEO_V4L2=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEO_BTCX=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9875=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS53L32A=mCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_CX25840=mCONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not setCONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not setCONFIG_VIDEO_SAA5246A=mCONFIG_VIDEO_SAA5249=m
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not setCONFIG_SOC_CAMERA=m
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not setCONFIG_V4L_USB_DRIVERS=yCONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=mCONFIG_USB_M5602=mCONFIG_USB_STV06XX=mCONFIG_USB_GSPCA_CONEX=mCONFIG_USB_GSPCA_ETOMS=mCONFIG_USB_GSPCA_FINEPIX=mCONFIG_USB_GSPCA_MARS=mCONFIG_USB_GSPCA_OV519=mCONFIG_USB_GSPCA_OV534=mCONFIG_USB_GSPCA_PAC207=mCONFIG_USB_GSPCA_PAC7311=mCONFIG_USB_GSPCA_SONIXB=mCONFIG_USB_GSPCA_SONIXJ=mCONFIG_USB_GSPCA_SPCA500=mCONFIG_USB_GSPCA_SPCA501=mCONFIG_USB_GSPCA_SPCA505=mCONFIG_USB_GSPCA_SPCA506=mCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_STK014=mCONFIG_USB_GSPCA_SUNPLUS=mCONFIG_USB_GSPCA_T613=mCONFIG_USB_GSPCA_TV8532=mCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_ZC3XX=mCONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_EM28XX_ALSA=mCONFIG_VIDEO_USBVISION=mCONFIG_USB_ET61X251=mCONFIG_USB_SN9C102=mCONFIG_USB_ZC0301=mCONFIG_USB_ZR364XX=mCONFIG_USB_STKWEBCAM=mCONFIG_USB_S2255=m
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not setCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=yCONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not setCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_HWDEP=yCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not setCONFIG_SND_HRTIMER=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not setCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not setCONFIG_SND_VMASTER=y
# CONFIG_SND_DRIVERS is not setCONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not setCONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not setCONFIG_SND_HDA_INTEL=yCONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not setCONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not setCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not setCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=yCONFIG_SND_USB_US122L=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not setCONFIG_HID_SUPPORT=yCONFIG_HID=m
# CONFIG_HID_DEBUG is not setCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=m
# CONFIG_HID_PID is not setCONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not setCONFIG_HID_A4TECH=mCONFIG_HID_APPLE=mCONFIG_HID_BELKIN=mCONFIG_HID_CHERRY=mCONFIG_HID_CHICONY=mCONFIG_HID_CYPRESS=mCONFIG_HID_EZKEY=mCONFIG_HID_GYRATION=mCONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=mCONFIG_HID_MONTEREY=mCONFIG_HID_NTRIG=mCONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not setCONFIG_HID_PETALYNX=mCONFIG_HID_SAMSUNG=mCONFIG_HID_SONY=mCONFIG_HID_SUNPLUS=m
# CONFIG_GREENASIA_FF is not setCONFIG_HID_TOPSEED=mCONFIG_THRUSTMASTER_FF=mCONFIG_ZEROPLUS_FF=mCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not setCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; #
#
# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB port drivers
#CONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=mCONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_OTI6858=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=mCONFIG_USB_SERIAL_SAFE_PADDED=yCONFIG_USB_SERIAL_SIEMENS_MPI=mCONFIG_USB_SERIAL_SIERRAWIRELESS=mCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_SERIAL_OPTICON=m
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_SEVSEG=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_BERRY_CHARGE=mCONFIG_USB_LED=mCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_PHIDGET=mCONFIG_USB_PHIDGETKIT=mCONFIG_USB_PHIDGETMOTORCONTROL=mCONFIG_USB_PHIDGETSERVO=mCONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not setCONFIG_USB_SISUSBVGA=mCONFIG_USB_SISUSBVGA_CON=yCONFIG_USB_LD=mCONFIG_USB_TRANCEVIBRATOR=mCONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not setCONFIG_USB_ISIGHTFW=mCONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_HP_DISK is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not setCONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not setCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_RTC_CLASS is not setCONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_JBD=m
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not setCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=mCONFIG_OCFS2_FS=mCONFIG_OCFS2_FS_O2CB=mCONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not setCONFIG_BTRFS_FS=mCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not setCONFIG_QFMT_V2=yCONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not setCONFIG_UFS_FS=mCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not setCONFIG_NFS_V4=yCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_SUNRPC_REGISTER_V4=yCONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=yCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not setCONFIG_9P_FS=m
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not setCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="cp850"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=mCONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not setCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not setCONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_TRACING=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not setCONFIG_IRQSOFF_TRACER=y
# CONFIG_SYSPROF_TRACER is not setCONFIG_SCHED_TRACER=yCONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not setCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not setCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not setCONFIG_IO_DELAY_NONE=yCONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not setCONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not setCONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0CONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=mCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=mCONFIG_CRYPTO_GCM=mCONFIG_CRYPTO_SEQIV=m
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=mCONFIG_CRYPTO_CTS=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=m
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=m
#
# Digest
#CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_RMD128=mCONFIG_CRYPTO_RMD160=mCONFIG_CRYPTO_RMD256=mCONFIG_CRYPTO_RMD320=mCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=m
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_CAMELLIA=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_SALSA20=mCONFIG_CRYPTO_SALSA20_X86_64=mCONFIG_CRYPTO_SEED=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=m
# CONFIG_KVM_INTEL is not setCONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#CONFIG_BITREVERSE=mCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=mCONFIG_CRC7=mCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=y
Quoted 21 lines · Torsten Kaiser
Quoted 3 lines · Venkatesh
I don't seem to be able to reproduce this failure on my test systems.. What distribution are you using here? Can you send me the kernel config that you used.
I'm using Gentoo, the compiler is:
gcc (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) 4.3.2The system has 2x 2218 Opterons with 4GB of RAM, so it a NUMA system with 2 nodes.
What might be important is, that I switched to the newTREE_RCU:
#CONFIG_CLASSIC_RCUis not setCONFIG_TREE_RCU=y
#CONFIG_PREEMPT_RCUis not set
#CONFIG_RCU_TRACEis not setCONFIG_RCU_FANOUT=4
#CONFIG_RCU_FANOUT_EXACTis not set
#CONFIG_TREE_RCU_TRACEis not set
#CONFIG_PREEMPT_RCU_TRACEis not set
Quoted 4 lines
Rest of the .config is attached. I used the same .config for the vanilla 2.6.29-rc1 that worked apart from the DRM trouble that was also reported by others and the version patched with these fixes.
I will try with this config. Meanwhile can you try the single patch below over 2.6.29-rc1 and see whether you still see the failure. This patch is fixing the DRM issue that you had seen and does not include other fixes cleaups that were in the patch series. If you still see the failure, can yo usend me the full boot log from the crash.
Thanks,
Venki
--- arch/x86/mm/pat.c | 50 ++++++++++++++++++++++++++++++++++---------------- mm/memory.c | 15 +++++++++++---- 2 files changed, 45 insertions(+), 20 deletions(-)
arch/x86/mm/pat.c +34 -16
@@ -601,12 +601,13 @@ void unmap_devmem(unsigned long pfn, uns* Reserved non RAM regions only and after successful reserve_memtype, * this func also keeps identity mapping (if any) in sync with this new prot. */ -static int reserve_pfn_range (u64 paddr,unsigned long size,pgprot_t vma_prot) +static int reserve_pfn_range (u64 paddr,unsigned long size,pgprot_t *vma_prot, +int strict_prot) {int is_ram =0 ;int id_sz, ret;unsigned long flags; -unsigned long want_flags = (pgprot_val (vma_prot) & _PAGE_CACHE_MASK); +unsigned long want_flags = (pgprot_val (*vma_prot) & _PAGE_CACHE_MASK); is_ram =pagerange_is_ram (paddr, paddr + size);
@@ -625,15 +626,29 @@ static int reserve_pfn_range(u64 paddr,return ret;if (flags != want_flags) { -free_memtype (paddr, paddr + size); -printk (KERN_ERR -"%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n" , - current->comm, current->pid, -cattr_name (want_flags), - (unsigned long long )paddr, - (unsigned long long )(paddr + size), -cattr_name (flags)); -return -EINVAL ; +if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) { +free_memtype (paddr, paddr + size); +printk (KERN_ERR "%s:%d map pfn expected mapping type %s" +" for %Lx-%Lx, got %s\n" , + current->comm, current->pid, +cattr_name (want_flags), + (unsigned long long )paddr, + (unsigned long long )(paddr + size), +cattr_name (flags)); +return -EINVAL ; + } +/* +* We allow returning different type than the one requested in +* non strict case. +*/ + *vma_prot =__pgprot ((pgprot_val (*vma_prot) & + (~_PAGE_CACHE_MASK)) | + flags); + }/* Need to keep identity mapping in sync */
@@ -689,6 +704,7 @@ int track_pfn_vma_copy(struct vm_area_stunsigned long vma_start = vma->vm_start;unsigned long vma_end = vma->vm_end;unsigned long vma_size = vma_end - vma_start; +pgprot_t pgprot;if (!pat_enabled)return 0 ;
@@ -702,7 +718,8 @@ int track_pfn_vma_copy(struct vm_area_stWARN_ON_ONCE (1 );return -EINVAL ; } -return reserve_pfn_range (paddr, vma_size,__pgprot (prot)); + pgprot =__pgprot (prot); +return reserve_pfn_range (paddr, vma_size, &pgprot,1 ); }/* reserve entire vma page by page, using pfn and prot from pte */
@@ -710,7 +727,8 @@ int track_pfn_vma_copy(struct vm_area_stif (follow_phys (vma, vma_start + i,0 , &prot, &paddr))continue ; - retval =reserve_pfn_range (paddr,PAGE_SIZE ,__pgprot (prot)); + pgprot =__pgprot (prot); + retval =reserve_pfn_range (paddr,PAGE_SIZE , &pgprot,1 );if (retval) goto cleanup_ret; }
@@ -741,7 +759,7 @@ cleanup_ret:* Note that this function can be called with caller trying to map only a * subrange/page inside the vma. */ -int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {int retval =0 ;
@@ -758,14 +776,14 @@ int track_pfn_vma_new(struct vm_area_strif (is_linear_pfn_mapping (vma)) {/* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t )vma->vm_pgoff <<PAGE_SHIFT ; -return reserve_pfn_range (paddr, vma_size, prot); +return reserve_pfn_range (paddr, vma_size, prot,0 ); }/* reserve page by page using pfn and size */ base_paddr = (resource_size_t )pfn <<PAGE_SHIFT ;for (i =0 ; i < size; i +=PAGE_SIZE ) { paddr = base_paddr + i; - retval =reserve_pfn_range (paddr,PAGE_SIZE , prot); + retval =reserve_pfn_range (paddr,PAGE_SIZE , prot,0 );if (retval) goto cleanup_ret; }
mm/memory.c +11 -4
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct unsigned long pfn) {int ret; +pgprot_t pgprot = vma->vm_page_prot;/* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_structif (addr < vma->vm_start || addr >= vma->vm_end)return -EFAULT ; -if (track_pfn_vma_new (vma, vma->vm_page_prot, pfn,PAGE_SIZE )) +if (track_pfn_vma_new (vma, &pgprot, pfn,PAGE_SIZE ))return -EINVAL ; - ret =insert_pfn (vma, addr, pfn, vma->vm_page_prot); + ret =insert_pfn (vma, addr, pfn, pgprot);if (ret)untrack_pfn_vma (vma, pfn,PAGE_SIZE );
@@ -1671,9 +1672,15 @@ int remap_pfn_range(struct vm_area_struc vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; - err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); -if (err) + err =track_pfn_vma_new (vma, &prot, pfn,PAGE_ALIGN (size)); +if (err) { +/* +* To indicate that track_pfn related cleanup is not +* needed from higher level routine calling unmap_vmas +*/ + vma->vm_flags &= ~(VM_IO |VM_RESERVED |VM_PFNMAP );return -EINVAL ; + }BUG_ON (addr >= end); pfn -= addr >>PAGE_SHIFT ;
Quoted 27 lines · Venkatesh
Quoted 21 lines · Torsten Kaiser
Quoted 3 lines · Venkatesh
I don't seem to be able to reproduce this failure on my test systems.. What distribution are you using here? Can you send me the kernel config that you used.
I'm using Gentoo, the compiler is:
gcc (Gentoo 4.3.2-r2 p1.5, pie-10.1.5) 4.3.2The system has 2x 2218 Opterons with 4GB of RAM, so it a NUMA system with 2 nodes.
What might be important is, that I switched to the newTREE_RCU:
#CONFIG_CLASSIC_RCUis not setCONFIG_TREE_RCU=y
#CONFIG_PREEMPT_RCUis not set
#CONFIG_RCU_TRACEis not setCONFIG_RCU_FANOUT=4
#CONFIG_RCU_FANOUT_EXACTis not set
#CONFIG_TREE_RCU_TRACEis not set
#CONFIG_PREEMPT_RCU_TRACEis not setQuoted 4 lines
Rest of the .config is attached. I used the same .config for the vanilla 2.6.29-rc1 that worked apart from the DRM trouble that was also reported by others and the version patched with these fixes.
Quoted 6 lines
I will try with this config. Meanwhile can you try the single patch below over 2.6.29-rc1 and see whether you still see the failure. This patch is fixing the DRM issue that you had seen and does not include other fixes cleaups that were in the patch series. If you still see the failure, can yo usend me the full boot log from the crash.
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Thanks,
Venki
---
arch/x86/mm/pat.c +34 -16
@@ -601,12 +601,13 @@ void unmap_devmem(unsigned long pfn, uns* Reserved non RAM regions only and after successful reserve_memtype, * this func also keeps identity mapping (if any) in sync with this new prot. */ -static int reserve_pfn_range (u64 paddr,unsigned long size,pgprot_t vma_prot) +static int reserve_pfn_range (u64 paddr,unsigned long size,pgprot_t *vma_prot, +int strict_prot) {int is_ram =0 ;int id_sz, ret;unsigned long flags; -unsigned long want_flags = (pgprot_val (vma_prot) & _PAGE_CACHE_MASK); +unsigned long want_flags = (pgprot_val (*vma_prot) & _PAGE_CACHE_MASK); is_ram =pagerange_is_ram (paddr, paddr + size);
@@ -625,15 +626,29 @@ static int reserve_pfn_range(u64 paddr,return ret;if (flags != want_flags) { -free_memtype (paddr, paddr + size); -printk (KERN_ERR -"%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n" , - current->comm, current->pid, -cattr_name (want_flags), - (unsigned long long )paddr, - (unsigned long long )(paddr + size), -cattr_name (flags)); -return -EINVAL ; +if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) { +free_memtype (paddr, paddr + size); +printk (KERN_ERR "%s:%d map pfn expected mapping type %s" +" for %Lx-%Lx, got %s\n" , + current->comm, current->pid, +cattr_name (want_flags), + (unsigned long long )paddr, + (unsigned long long )(paddr + size), +cattr_name (flags)); +return -EINVAL ; + } +/* +* We allow returning different type than the one requested in +* non strict case. +*/ + *vma_prot =__pgprot ((pgprot_val (*vma_prot) & + (~_PAGE_CACHE_MASK)) | + flags); + }/* Need to keep identity mapping in sync */
@@ -689,6 +704,7 @@ int track_pfn_vma_copy(struct vm_area_stunsigned long vma_start = vma->vm_start;unsigned long vma_end = vma->vm_end;unsigned long vma_size = vma_end - vma_start; +pgprot_t pgprot;if (!pat_enabled)return 0 ;
@@ -702,7 +718,8 @@ int track_pfn_vma_copy(struct vm_area_stWARN_ON_ONCE (1 );return -EINVAL ; } -return reserve_pfn_range (paddr, vma_size,__pgprot (prot)); + pgprot =__pgprot (prot); +return reserve_pfn_range (paddr, vma_size, &pgprot,1 ); }/* reserve entire vma page by page, using pfn and prot from pte */
@@ -710,7 +727,8 @@ int track_pfn_vma_copy(struct vm_area_stif (follow_phys (vma, vma_start + i,0 , &prot, &paddr))continue ; - retval =reserve_pfn_range (paddr,PAGE_SIZE ,__pgprot (prot)); + pgprot =__pgprot (prot); + retval =reserve_pfn_range (paddr,PAGE_SIZE , &pgprot,1 );if (retval) goto cleanup_ret; }
@@ -741,7 +759,7 @@ cleanup_ret:* Note that this function can be called with caller trying to map only a * subrange/page inside the vma. */ -int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {int retval =0 ;
@@ -758,14 +776,14 @@ int track_pfn_vma_new(struct vm_area_strif (is_linear_pfn_mapping (vma)) {/* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t )vma->vm_pgoff <<PAGE_SHIFT ; -return reserve_pfn_range (paddr, vma_size, prot); +return reserve_pfn_range (paddr, vma_size, prot,0 ); }/* reserve page by page using pfn and size */ base_paddr = (resource_size_t )pfn <<PAGE_SHIFT ;for (i =0 ; i < size; i +=PAGE_SIZE ) { paddr = base_paddr + i; - retval =reserve_pfn_range (paddr,PAGE_SIZE , prot); + retval =reserve_pfn_range (paddr,PAGE_SIZE , prot,0 );if (retval) goto cleanup_ret; }
mm/memory.c +11 -4
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct unsigned long pfn) {int ret; +pgprot_t pgprot = vma->vm_page_prot;/* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_structif (addr < vma->vm_start || addr >= vma->vm_end)return -EFAULT ; -if (track_pfn_vma_new (vma, vma->vm_page_prot, pfn,PAGE_SIZE )) +if (track_pfn_vma_new (vma, &pgprot, pfn,PAGE_SIZE ))return -EINVAL ; - ret =insert_pfn (vma, addr, pfn, vma->vm_page_prot); + ret =insert_pfn (vma, addr, pfn, pgprot);if (ret)untrack_pfn_vma (vma, pfn,PAGE_SIZE );
@@ -1671,9 +1672,15 @@ int remap_pfn_range(struct vm_area_struc vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; - err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); -if (err) + err =track_pfn_vma_new (vma, &prot, pfn,PAGE_ALIGN (size)); +if (err) { +/* +* To indicate that track_pfn related cleanup is not +* needed from higher level routine calling unmap_vmas +*/ + vma->vm_flags &= ~(VM_IO |VM_RESERVED |VM_PFNMAP );return -EINVAL ; + }BUG_ON (addr >= end); pfn -= addr >>PAGE_SHIFT ;
include/asm-generic/pgtable.h +2 -2
@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,* track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {return 0 ;
@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { }#else -extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size);extern int track_pfn_vma_copy (struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
arch/x86/mm/pat.c static int reserve_pfn_range(u64 paddr, · line 633
Quoted 5 lines · Venkatesh
arch/x86/mm/pat.c +5
-0+if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) {
Please don't write code like this.
Do it as an inline function that returns true/false and has comments on what the hell is going on.
If a conditional doesn't fit on one line, it should generally be abstracted away into a readable function where the name explains what it does conceptually.
Linus
Quoted 11 lines · Linus Torvalds
arch/x86/mm/pat.c static int reserve_pfn_range(u64 paddr, · line 633
Quoted 5 lines · Venkatesh
arch/x86/mm/pat.c +5
-0+if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) {Please don't write code like this.
Quoted 7 lines
Do it as an inline function that returns true/false and has comments on what the hell is going on.
If a conditional doesn't fit on one line, it should generally be abstracted away into a readable function where the name explains what it does conceptually.
Yes. The actual patch that is lined up in tip fixes indeed has this as a macro sharing this code with 2 callers and comment about this (is_new_memtype_allowed()). I wanted to keep the changes smaller in this test patch, which is just to root cause this particular crash and ended up with above code.
Thanks,
Venki
Quoted 20 lines · Pallipadi, Venkatesh
Quoted 11 lines · Linus Torvalds
Review
Quoted 5 lines · Venkatesh
(quoted diff) +5
-0+ if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) {Please don't write code like this.
Quoted 7 lines
Do it as an inline function that returns true/false and has comments on what the hell is going on.
If a conditional doesn't fit on one line, it should generally be abstracted away into a readable function where the name explains what it does conceptually.
Quoted 5 lines
Yes. The actual patch that is lined up in tip fixes indeed has this as a macro sharing this code with 2 callers and comment about this (
is_new_memtype_allowed()). I wanted to keep the changes smaller in this test patch, which is just to root cause this particular crash and ended up with above code.
here are those 7 tip/x86/pat commits below, with changelogs.
Ingo
----------------------->
commit 4fa1489d2a74c1e3c6231f449d73ce46131523ae
Author: Suresh Siddha <[email protected]> Date: Fri Jan 9 14:35:20 2009 -0800
x86, pat: fix reserve_memtype() for legacy 1MB range
Thierry Vignaud reported:
> http://bugzilla.kernel.org/show_bug.cgi?id=12372
>
> On P4 with an SiS motherboard (video card is a SiS 651)
> X server fails to start with error:
> xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument)
Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time.
Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed)
arch/x86/mm/pat.c +14 -5
@@ -333,11 +333,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, req_type & _PAGE_CACHE_MASK); } - is_range_ram =pagerange_is_ram (start, end); -if (is_range_ram ==1 ) -return reserve_ram_pages_type (start, end, req_type, new_type); -else if (is_range_ram <0 ) -return -EINVAL ; +/* +* For legacy reasons, some parts of the physical address range in the +* legacy 1MB region is treated as non-RAM (even when listed as RAM in +* the e820 tables). So we will track the memory attributes of this +* legacy 1MB region using the linear memtype_list always. +*/ +if (end >=ISA_END_ADDRESS ) { + is_range_ram =pagerange_is_ram (start, end); +if (is_range_ram ==1 ) +return reserve_ram_pages_type (start, end, req_type, + new_type); +else if (is_range_ram <0 ) +return -EINVAL ; + } new =kmalloc (sizeof (struct memtype ),GFP_KERNEL );if (!new)
commit 895252ccb3050383e1dcf2c2536065e346c2fa14
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:14 2009 -0800
x86 PAT: remove CPA WARN_ON for zero pte
Impact: reduce scope of debug check - avoid warnings
The logic to find whether identity map exists or not using
high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete
as the memory withing the range may not be mapped if there is a
unusable hole in e820.
Specifically, on my test system I started seeing these warnings with
tools like hwinfo, acpidump trying to map ACPI region.
[ 27.400018] ------------[ cut here ]------------
[ 27.400344] WARNING: at /home/venkip/src/linus/linux-2.6/arch/x86/mm/pageattr.c:560 __change_page_attr_set_clr+0xf3/0x8b8()
[ 27.400821] Hardware name: X7DB8
[ 27.401070] CPA: called for zero pte. vaddr = ffff8800cff6a000 cpa->vaddr = ffff8800cff6a000
[ 27.401569] Modules linked in:
[ 27.401882] Pid: 4913, comm: dmidecode Not tainted 2.6.28-05716-gfe0bdec #586
[ 27.402141] Call Trace:
[ 27.402488] [<ffffffff80237c21>] warn_slowpath+0xd3/0x10f
[ 27.402749] [<ffffffff80274ade>] ? find_get_page+0xb3/0xc9
[ 27.403028] [<ffffffff80274a2b>] ? find_get_page+0x0/0xc9
[ 27.403333] [<ffffffff80226425>] __change_page_attr_set_clr+0xf3/0x8b8
[ 27.403628] [<ffffffff8028ec99>] ? __purge_vmap_area_lazy+0x192/0x1a1
[ 27.403883] [<ffffffff8028eb52>] ? __purge_vmap_area_lazy+0x4b/0x1a1
[ 27.404172] [<ffffffff80290268>] ? vm_unmap_aliases+0x1ab/0x1bb
[ 27.404512] [<ffffffff80290105>] ? vm_unmap_aliases+0x48/0x1bb
[ 27.404766] [<ffffffff80226d28>] change_page_attr_set_clr+0x13e/0x2e6
[ 27.405026] [<ffffffff80698fa7>] ? _spin_unlock+0x26/0x2a
[ 27.405292] [<ffffffff80227e6a>] ? reserve_memtype+0x19b/0x4e3
[ 27.405590] [<ffffffff80226ffd>] _set_memory_wb+0x22/0x24
[ 27.405844] [<ffffffff80225d28>] ioremap_change_attr+0x26/0x28
[ 27.406097] [<ffffffff80228355>] reserve_pfn_range+0x1a3/0x235
[ 27.406427] [<ffffffff80228430>] track_pfn_vma_new+0x49/0xb3
[ 27.406686] [<ffffffff80286c46>] remap_pfn_range+0x94/0x32c
[ 27.406940] [<ffffffff8022878d>] ? phys_mem_access_prot_allowed+0xb5/0x1a8
[ 27.407209] [<ffffffff803e9bf4>] mmap_mem+0x75/0x9d
[ 27.407523] [<ffffffff8028b3b4>] mmap_region+0x2cf/0x53e
[ 27.407776] [<ffffffff8028b8cc>] do_mmap_pgoff+0x2a9/0x30d
[ 27.408034] [<ffffffff8020f4a4>] sys_mmap+0x92/0xce
[ 27.408339] [<ffffffff8020b65b>] system_call_fastpath+0x16/0x1b
[ 27.408614] ---[ end trace 4b16ad70c09a602d ]---
[ 27.408871] dmidecode:4913 reserve_pfn_range ioremap_change_attr failed write-back for cff6a000-cff6b000
This is wih track_pfn_vma_new trying to keep identity map in sync.
The address cff6a000 is the ACPI region according to e820.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
[ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
[ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
And is not mapped as per init_memory_mapping.
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff60000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
We can add logic to check for this. But, there can also be other holes in
identity map when we have 1GB of aligned reserved space in e820.
This patch handles it by removing the WARN_ON and returning a specific
error value (EFAULT) to indicate that the address does not have any
identity mapping.
The code that tries to keep identity map in sync can ignore
this error, with other callers of cpa still getting error here.
Signed-off-by: Venkatesh Pallipadi <[email protected]>
Signed-off-by: Suresh Siddha <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>arch/x86/mm/pageattr.c +6 -4
@@ -555,10 +555,12 @@ repeat:if (!pte_val (old_pte)) {if (!primary)return 0 ; -WARN (1 ,KERN_WARNING "CPA: called for zero pte. " -"vaddr = %lx cpa->vaddr = %lx\n" , address, - *cpa->vaddr); -return -EINVAL ; + +/* +* Special error value returned, indicating that the mapping +* did not exist at this address. +*/ +return -EFAULT ; }if (level ==PG_LEVEL_4K ) {
arch/x86/mm/pat.c +32 -13
69 lines not on this page · raw message
commit 838b120c59b530ba58cc0197d208d08455733472
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:13 2009 -0800
x86 PAT: ioremap_wc should take resource_size_t parameter
Impact: fix/extend ioremap_wc() beyond 4GB aperture on 32-bit
ioremap_wc() was taking in unsigned long parameter, where as it should take 64-bit resource_size_t parameter like other ioremap variants.
arch/x86/include/asm/io.h +1 -1
@@ -91,7 +91,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);extern int ioremap_change_attr (unsigned long vaddr,unsigned long size,unsigned long prot_val); -extern void __iomem *ioremap_wc (unsigned long offset,unsigned long size); +extern void __iomem *ioremap_wc (resource_size_t offset,unsigned long size);/* * early_ioremap() and early_iounmap() are for temporary early boot-time
arch/x86/mm/ioremap.c +1 -1
@@ -367,7 +367,7 @@ EXPORT_SYMBOL(ioremap_nocache);* * Must be freed with iounmap. */ -void __iomem *ioremap_wc (unsigned long phys_addr,unsigned long size) +void __iomem *ioremap_wc (resource_size_t phys_addr,unsigned long size) {if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
commit 283c81fe6568202db345649e874d2a0f29dc5a84
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:12 2009 -0800
x86 PAT: return compatible mapping to remap_pfn_range callers
Impact: avoid warning message, potentially solve 3D performance regression
Change x86 PAT code to return compatible memtype if the exact memtype that was requested in remap_pfn_rage and friends is not available due to some conflict.
This is done by returning the compatible type in pgprot parameter of track_pfn_vma_new(), and the caller uses that memtype for page table.
Note that track_pfn_vma_copy() which is basically called during fork gets the prot from existing page table and should not have any conflict. Hence we use strict memtype check there and do not allow compatible memtypes.
This patch fixes the bug reported here:
http://marc.info/?l=linux-kernel&m=123108883716357&w=2
Specifically the error message:
X:5010 map pfn expected mapping type write-back for d0000000-d0101000, got write-combining
Should go away.
arch/x86/mm/pat.c +28 -15
89 lines not on this page · raw message
commit dfed11010f7b2d994444bcd83ec4cc7e80d7d030
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:11 2009 -0800
x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param
Impact: cleanup
Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer. Subsequent patch changes the x86 PAT handling to return a compatible memtype in pgprot_t, if what was requested cannot be allowed due to conflicts. No fuctionality change in this patch.
arch/x86/mm/pat.c +3 -3
@@ -741,7 +741,7 @@ cleanup_ret:* Note that this function can be called with caller trying to map only a * subrange/page inside the vma. */ -int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {int retval =0 ;
@@ -758,14 +758,14 @@ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,if (is_linear_pfn_mapping (vma)) {/* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t )vma->vm_pgoff <<PAGE_SHIFT ; -return reserve_pfn_range (paddr, vma_size, prot); +return reserve_pfn_range (paddr, vma_size, *prot); }/* reserve page by page using pfn and size */ base_paddr = (resource_size_t )pfn <<PAGE_SHIFT ;for (i =0 ; i < size; i +=PAGE_SIZE ) { paddr = base_paddr + i; - retval =reserve_pfn_range (paddr,PAGE_SIZE , prot); + retval =reserve_pfn_range (paddr,PAGE_SIZE , *prot);if (retval) goto cleanup_ret; }
include/asm-generic/pgtable.h +2 -2
@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,* track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {return 0 ;
@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { }#else -extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size);extern int track_pfn_vma_copy (struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
mm/memory.c +4 -3
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) {int ret; +pgprot_t pgprot = vma->vm_page_prot;/* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,if (addr < vma->vm_start || addr >= vma->vm_end)return -EFAULT ; -if (track_pfn_vma_new (vma, vma->vm_page_prot, pfn,PAGE_SIZE )) +if (track_pfn_vma_new (vma, &pgprot, pfn,PAGE_SIZE ))return -EINVAL ; - ret =insert_pfn (vma, addr, pfn, vma->vm_page_prot); + ret =insert_pfn (vma, addr, pfn, pgprot);if (ret)untrack_pfn_vma (vma, pfn,PAGE_SIZE );
@@ -1671,7 +1672,7 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; - err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); + err =track_pfn_vma_new (vma, &prot, pfn,PAGE_ALIGN (size));if (err) {/* * To indicate that track_pfn related cleanup is not
commit a8eae3321ea94fe06c6a76b48cc6a082116b1784
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:10 2009 -0800
x86 PAT: consolidate old memtype new memtype check into a function
Impact: cleanup
Move the new memtype old memtype allowed check to header so that is can be shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range() code path. No functionality change in this patch.
arch/x86/include/asm/pgtable.h +19 -0
@@ -341,6 +341,25 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)#define canon_pgprot (p) __pgprot(pgprot_val(p) & __supported_pte_mask) +static inline int is_new_memtype_allowed (unsigned long flags, +unsigned long new_flags) +{ +/* +* Certain new memtypes are not allowed with certain +* requested memtype: +* - request is uncached, return cannot be write-back +* - request is write-combine, return cannot be write-back +*/ +if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { +return 0 ; + } + +return 1 ; +} +#ifndef __ASSEMBLY__/* Indicate that x86 has its own track and untrack pfn vma functions */ #define __HAVE_PFNMAP_TRACKING
arch/x86/pci/i386.c +1 -11
@@ -314,17 +314,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,return retval;if (flags != new_flags) { -/* -* Do not fallback to certain memory types with certain -* requested type: -* - request is uncached, return cannot be write-back -* - request is uncached, return cannot be write-combine -* - request is write-combine, return cannot be write-back -*/ -if ((flags == _PAGE_CACHE_UC_MINUS && - (new_flags == _PAGE_CACHE_WB)) || - (flags == _PAGE_CACHE_WC && - new_flags == _PAGE_CACHE_WB)) { +if (!is_new_memtype_allowed (flags, new_flags)) {free_memtype (addr, addr+len);return -EINVAL ; }
commit 18d82ebde7e40bf67c84b505a12be26133a89932
Author: [email protected] <[email protected]> Date: Fri Jan 9 16:13:09 2009 -0800
x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
Impact: fix (harmless) double-free of memtype entries and avoid warning
On track_pfn_vma_new() failure, reset the vm_flags so that there will be no second cleanup happening when upper level routines call unmap_vmas().
This patch fixes part of the bug reported here:
http://marc.info/?l=linux-kernel&m=123108883716357&w=2
Specifically the error message:
X:5010 freeing invalid memtype d0000000-d0101000
Is due to multiple frees on error path, will not happen with the patch below.
mm/memory.c +7 -1
@@ -1672,8 +1672,14 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); -if (err) +if (err) { +/* +* To indicate that track_pfn related cleanup is not +* needed from higher level routine calling unmap_vmas +*/ + vma->vm_flags &= ~(VM_IO |VM_RESERVED |VM_PFNMAP );return -EINVAL ; + }BUG_ON (addr >= end); pfn -= addr >>PAGE_SHIFT ;
Quoted 11 lines · Linus Torvalds
arch/x86/mm/pat.c static int reserve_pfn_range(u64 paddr, · line 633
Quoted 5 lines · Venkatesh
arch/x86/mm/pat.c +5
-0+if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) {Please don't write code like this.
Quoted 2 lines
Do it as an inline function that returns true/false and has comments on what the hell is going on.
I have asked Venki to do a minimal 'combo' patch that isolates just the functional changes. (it is otherwise identical to Venki's PAT changes.)
The reason why we wanted to re-test the functional changes was that Torsten's crash looks very weird: double Call Trace line, a crash in the scsi/ata code, showing the after-effects of some sort of memory corruption there.
Connection to the x86-fixes patchset did not seem impossible [a theory would be: cache aliasing problems causing memory corruption], but nevertheless it was all quite weird. So we wanted an isolated repeat test for just the functional changes.
The 7 patches lined up for you (but quarantined from x86/urgent for now, until the crash Torsten got is investigated) introduce the above condition cleanly, as:
+static inline int is_new_memtype_allowed(unsigned long flags,
+ unsigned long new_flags)
+{
+ /*
+ * Certain new memtypes are not allowed with certain + * requested memtype: + * - request is uncached, return cannot be write-back + * - request is write-combine, return cannot be write-back + */
+ if ((flags == _PAGE_CACHE_UC_MINUS &&
+ new_flags == _PAGE_CACHE_WB) ||
+ (flags == _PAGE_CACHE_WC &&
+ new_flags == _PAGE_CACHE_WB)) {
+ return 0;
+ }
+
+ return 1;
+}
Ingo
Quoted 7 lines · Ingo Molnar
* Linus Torvalds <[email protected]> wrote:
(quoted diff) +5
-0+static inline int is_new_memtype_allowed(unsigned long flags, + unsigned long new_flags) +{ + /* + * Certain new memtypes are not allowed with certain
Review
Quoted 10 lines
(quoted diff) +10
-0+ * requested memtype: + * - request is uncached, return cannot be write-back + * - request is write-combine, return cannot be write-back + */ + if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { + return 0; + }
if ((flags == _PAGE_CACHE_UC_MINUS || flags == _PAGE_CACHE_WC) && (new_flags == _PAGE_CACHE_WB))
might be a bit neater perhaps.
Harvey
Quoted 22 lines · Harvey Harrison
Quoted 7 lines · Ingo Molnar
* Linus Torvalds <[email protected]> wrote:
(quoted diff) +5
-0+static inline int is_new_memtype_allowed(unsigned long flags, + unsigned long new_flags) +{ + /* + * Certain new memtypes are not allowed with certainReview
Quoted 10 lines
(quoted diff) +10
-0+ * requested memtype: + * - request is uncached, return cannot be write-back + * - request is write-combine, return cannot be write-back + */ + if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { + return 0; + }if ((flags == _PAGE_CACHE_UC_MINUS || flags == _PAGE_CACHE_WC) && (new_flags == _PAGE_CACHE_WB))
Quoted 1 line
might be a bit neater perhaps.
indeed. The most readable one is probably:
static inline intis_new_memtype_allowed(unsigned long flags, unsigned long new_flags)
{
/*
* Certain new memtypes are not allowed with certain
* requested memtype:
* - request is uncached, return cannot be write-back
* - request is write-combine, return cannot be write-back
*/
if (new_flags != _PAGE_CACHE_WB)
return 1;
if (flags == _PAGE_CACHE_UC_MINUS)
return 0;
if (flags == _PAGE_CACHE_WC)
return 0;
return 1;
}Ingo
Quoted 4 lines · Ingo Molnar
The reason why we wanted to re-test the functional changes was that Torsten's crash looks very weird: double Call Trace line, a crash in the scsi/ata code, showing the after-effects of some sort of memory corruption there.
The double Call Trace: line was a copy&paste error on my part. Its not there in the original oops.
Sorry for that...
Torsten
Quoted 10 lines · Torsten Kaiser
Quoted 4 lines · Ingo Molnar
The reason why we wanted to re-test the functional changes was that Torsten's crash looks very weird: double Call Trace line, a crash in the scsi/ata code, showing the after-effects of some sort of memory corruption there.
The double Call Trace: line was a copy&paste error on my part. Its not there in the original oops.
Sorry for that...
ah, ok - that's fine.
I was just wondering whether it was two CPUs crashing at once and producing an overlap - or something like that. (although typically in that case we dont get such nice line duplication - we get totally garbled output of the two oopses superimposed.)
It's just that when an oops looks weird we have to look at every small detail, to be able to imagine the unimaginable.
Bugs you cannot even imagine are the toughest nuts usually, as the process of debugging narrows imagination usually - often it involves repetitive automatisms which are not helpful in expanding your thoughts to cover tricky, unusual bugs.
If an oops looks difficult there's a way out of that trap: co-debug in duos if you can - the same folks rarely get unimaginative for the very same detail. (Or put it aside and leave it for the next morning - to flush out the invisible temporary mental dead-ends one has installed subconsciously and which are blocking you from reaching the real solution.)
Ingo
Torsten Kaiser
Tested-byQuoted 7 lines · Venkatesh
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Thanks,
VenkiSigned-off-by Venkatesh Pallipadi <[email protected]>
The system boots normal and glxgears is accelerated again.
Quoted 181 lines
---
Index:
linux-2.6/arch/x86/mm/pat.c
===================================================================arch/x86/mm/pat.c 2009-01-12 11:06:43.000000000 -0800 renamed from arch/x86/mm/pat.c 2009-01-12 10:45:03.000000000 -0800 +34
-16@@ -601,12 +601,13 @@ void unmap_devmem(unsigned long pfn, uns * Reserved non RAM regions only and after successful reserve_memtype, * this func also keeps identity mapping (if any) in sync with this new prot. */ -static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t vma_prot) +static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, + int strict_prot) { int is_ram = 0; int id_sz, ret; unsigned long flags; - unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK); + unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK); is_ram = pagerange_is_ram(paddr, paddr + size);@@ -625,15 +626,29 @@ static int reserve_pfn_range(u64 paddr, return ret; if (flags != want_flags) { - free_memtype(paddr, paddr + size); - printk(KERN_ERR - "%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n", - current->comm, current->pid, - cattr_name(want_flags), - (unsigned long long)paddr, - (unsigned long long)(paddr + size), - cattr_name(flags)); - return -EINVAL; + if (strict_prot || + (want_flags == _PAGE_CACHE_UC_MINUS && + flags == _PAGE_CACHE_WB) || + (want_flags == _PAGE_CACHE_WC && + flags == _PAGE_CACHE_WB)) { + free_memtype(paddr, paddr + size); + printk(KERN_ERR "%s:%d map pfn expected mapping type %s" + " for %Lx-%Lx, got %s\n", + current->comm, current->pid, + cattr_name(want_flags), + (unsigned long long)paddr, + (unsigned long long)(paddr + size), + cattr_name(flags)); + return -EINVAL; + } + /* + * We allow returning different type than the one requested in + * non strict case. + */ + *vma_prot = __pgprot((pgprot_val(*vma_prot) & + (~_PAGE_CACHE_MASK)) | + flags); + } /* Need to keep identity mapping in sync */@@ -689,6 +704,7 @@ int track_pfn_vma_copy(struct vm_area_st unsigned long vma_start = vma->vm_start; unsigned long vma_end = vma->vm_end; unsigned long vma_size = vma_end - vma_start; + pgprot_t pgprot; if (!pat_enabled) return 0;@@ -702,7 +718,8 @@ int track_pfn_vma_copy(struct vm_area_st WARN_ON_ONCE(1); return -EINVAL; } - return reserve_pfn_range(paddr, vma_size, __pgprot(prot)); + pgprot = __pgprot(prot); + return reserve_pfn_range(paddr, vma_size, &pgprot, 1); } /* reserve entire vma page by page, using pfn and prot from pte */@@ -710,7 +727,8 @@ int track_pfn_vma_copy(struct vm_area_st if (follow_phys(vma, vma_start + i, 0, &prot, &paddr)) continue; - retval = reserve_pfn_range(paddr, PAGE_SIZE, __pgprot(prot)); + pgprot = __pgprot(prot); + retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1); if (retval) goto cleanup_ret; }@@ -741,7 +759,7 @@ cleanup_ret: * Note that this function can be called with caller trying to map only a * subrange/page inside the vma. */ -int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot, +int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot, unsigned long pfn, unsigned long size) { int retval = 0;@@ -758,14 +776,14 @@ int track_pfn_vma_new(struct vm_area_str if (is_linear_pfn_mapping(vma)) { /* reserve the whole chunk starting from vm_pgoff */ paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT; - return reserve_pfn_range(paddr, vma_size, prot); + return reserve_pfn_range(paddr, vma_size, prot, 0); } /* reserve page by page using pfn and size */ base_paddr = (resource_size_t)pfn << PAGE_SHIFT; for (i = 0; i < size; i += PAGE_SIZE) { paddr = base_paddr + i; - retval = reserve_pfn_range(paddr, PAGE_SIZE, prot); + retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0); if (retval) goto cleanup_ret; }Index:
linux-2.6/mm/memory.c
===================================================================mm/memory.c 2009-01-12 10:59:30.000000000 -0800 renamed from mm/memory.c 2009-01-12 10:45:03.000000000 -0800 +11
-4@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct unsigned long pfn) { int ret; + pgprot_t pgprot = vma->vm_page_prot; /* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_struct if (addr < vma->vm_start || addr >= vma->vm_end) return -EFAULT; - if (track_pfn_vma_new(vma, vma->vm_page_prot, pfn, PAGE_SIZE)) + if (track_pfn_vma_new(vma, &pgprot, pfn, PAGE_SIZE)) return -EINVAL; - ret = insert_pfn(vma, addr, pfn, vma->vm_page_prot); + ret = insert_pfn(vma, addr, pfn, pgprot); if (ret) untrack_pfn_vma(vma, pfn, PAGE_SIZE);@@ -1671,9 +1672,15 @@ int remap_pfn_range(struct vm_area_struc vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; - err = track_pfn_vma_new(vma, prot, pfn, PAGE_ALIGN(size)); - if (err) + err = track_pfn_vma_new(vma, &prot, pfn, PAGE_ALIGN(size)); + if (err) { + /* + * To indicate that track_pfn related cleanup is not + * needed from higher level routine calling unmap_vmas + */ + vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP); return -EINVAL; + } BUG_ON(addr >= end); pfn -= addr >> PAGE_SHIFT;include/asm-generic/pgtable.h +2
-2@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,* track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {return 0 ;@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { }#else -extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size);extern int track_pfn_vma_copy (struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
Quoted 5 lines · Torsten Kaiser
Quoted 3 lines · Venkatesh
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Quoted 8 lines
Quoted 4 lines
Thanks,
VenkiSigned-off-by Venkatesh Pallipadi <[email protected]>Tested-by Torsten Kaiser <[email protected]>The system boots normal and glxgears is accelerated again.
Could you try the tree below as well please?
It's functionally the same as the patch you just tried - with a few cleanups. (If you again get a crash then we know that it's the difference between this version and the patch you just tried that causes the crash.)
You can git-pull the URI below into v2.6.29-rc1.
Ingo
---------------------->
Please pull the latest x86/pat git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86/pat
out-of-topic modifications in x86/pat:
--------------------------------------include/asm-generic/pgtable.h # dfed110: x86 PAT: change track_pfn_vma_newmm/memory.c # dfed110: x86 PAT: change track_pfn_vma_new
# 18d82eb: x86 PAT: remove PFNMAP type on tr
Thanks,
Ingo
------------------>
Suresh Siddha (1):
x86, pat: fix reserve_memtype() for legacy 1MB range
[email protected] (6):
x86 PAT: remove PFNMAP type on track_pfn_vma_new() error x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param x86 PAT: return compatible mapping to remap_pfn_range callers x86 PAT: ioremap_wc should take resource_size_t parameter x86 PAT: remove CPA WARN_ON for zero pte
arch/x86/include/asm/io.h | 2 +- arch/x86/include/asm/pgtable.h | 19 +++++++ arch/x86/mm/ioremap.c | 2 +- arch/x86/mm/pageattr.c | 10 ++-- arch/x86/mm/pat.c | 109 +++++++++++++++++++++++++++------------ arch/x86/pci/i386.c | 12 +---- include/asm-generic/pgtable.h | 4 +- mm/memory.c | 15 ++++-- 8 files changed, 116 insertions(+), 57 deletions(-)
arch/x86/include/asm/io.h +1 -1
@@ -91,7 +91,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);extern int ioremap_change_attr (unsigned long vaddr,unsigned long size,unsigned long prot_val); -extern void __iomem *ioremap_wc (unsigned long offset,unsigned long size); +extern void __iomem *ioremap_wc (resource_size_t offset,unsigned long size);/* * early_ioremap() and early_iounmap() are for temporary early boot-time
arch/x86/include/asm/pgtable.h +19 -0
@@ -341,6 +341,25 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)#define canon_pgprot (p) __pgprot(pgprot_val(p) & __supported_pte_mask) +static inline int is_new_memtype_allowed (unsigned long flags, +unsigned long new_flags) +{ +/* +* Certain new memtypes are not allowed with certain +* requested memtype: +* - request is uncached, return cannot be write-back +* - request is write-combine, return cannot be write-back +*/ +if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { +return 0 ; + } + +return 1 ; +} +#ifndef __ASSEMBLY__/* Indicate that x86 has its own track and untrack pfn vma functions */ #define __HAVE_PFNMAP_TRACKING
arch/x86/mm/ioremap.c +1 -1
@@ -367,7 +367,7 @@ EXPORT_SYMBOL(ioremap_nocache);* * Must be freed with iounmap. */ -void __iomem *ioremap_wc (unsigned long phys_addr,unsigned long size) +void __iomem *ioremap_wc (resource_size_t phys_addr,unsigned long size) {if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
arch/x86/mm/pageattr.c +6 -4
@@ -555,10 +555,12 @@ repeat:if (!pte_val (old_pte)) {if (!primary)return 0 ; -WARN (1 ,KERN_WARNING "CPA: called for zero pte. " -"vaddr = %lx cpa->vaddr = %lx\n" , address, - *cpa->vaddr); -return -EINVAL ; + +/* +* Special error value returned, indicating that the mapping +* did not exist at this address. +*/ +return -EFAULT ; }if (level ==PG_LEVEL_4K ) {
arch/x86/mm/pat.c +75 -34
180 lines not on this page · raw message
arch/x86/pci/i386.c +1 -11
@@ -314,17 +314,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,return retval;if (flags != new_flags) { -/* -* Do not fallback to certain memory types with certain -* requested type: -* - request is uncached, return cannot be write-back -* - request is uncached, return cannot be write-combine -* - request is write-combine, return cannot be write-back -*/ -if ((flags == _PAGE_CACHE_UC_MINUS && - (new_flags == _PAGE_CACHE_WB)) || - (flags == _PAGE_CACHE_WC && - new_flags == _PAGE_CACHE_WB)) { +if (!is_new_memtype_allowed (flags, new_flags)) {free_memtype (addr, addr+len);return -EINVAL ; }
include/asm-generic/pgtable.h +2 -2
@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,* track_pfn_vma_new is called when a _new_ pfn mapping is being established * for physical range indicated by pfn and size. */ -static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +static inline int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size) {return 0 ;
@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma, { }#else -extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t prot, +extern int track_pfn_vma_new (struct vm_area_struct *vma,pgprot_t *prot,unsigned long pfn,unsigned long size);extern int track_pfn_vma_copy (struct vm_area_struct *vma); extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
mm/memory.c +11 -4
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) {int ret; +pgprot_t pgprot = vma->vm_page_prot;/* * Technically, architectures with pte_special can avoid all these * restrictions (same for remap_pfn_range). However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,if (addr < vma->vm_start || addr >= vma->vm_end)return -EFAULT ; -if (track_pfn_vma_new (vma, vma->vm_page_prot, pfn,PAGE_SIZE )) +if (track_pfn_vma_new (vma, &pgprot, pfn,PAGE_SIZE ))return -EINVAL ; - ret =insert_pfn (vma, addr, pfn, vma->vm_page_prot); + ret =insert_pfn (vma, addr, pfn, pgprot);if (ret)untrack_pfn_vma (vma, pfn,PAGE_SIZE );
@@ -1671,9 +1672,15 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, vma->vm_flags |=VM_IO |VM_RESERVED |VM_PFNMAP ; - err =track_pfn_vma_new (vma, prot, pfn,PAGE_ALIGN (size)); -if (err) + err =track_pfn_vma_new (vma, &prot, pfn,PAGE_ALIGN (size)); +if (err) { +/* +* To indicate that track_pfn related cleanup is not +* needed from higher level routine calling unmap_vmas +*/ + vma->vm_flags &= ~(VM_IO |VM_RESERVED |VM_PFNMAP );return -EINVAL ; + }BUG_ON (addr >= end); pfn -= addr >>PAGE_SHIFT ;
Quoted 11 lines · Ingo Molnar
Quoted 8 lines · Torsten Kaiser
Quoted 6 lines · Venkatesh
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Thanks,
Venki
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Venkatesh Pallipadi <[email protected]>Tested-by Torsten Kaiser <[email protected]>The system boots normal and glxgears is accelerated again.
Could you try the tree below as well please?
Before I read this mail, I already tried the tree you send to Linus as a pull request.
That worked without a crash, but as expected the DRM related error was still there.
Quoted 4 lines
It's functionally the same as the patch you just tried - with a few cleanups. (If you again get a crash then we know that it's the difference between this version and the patch you just tried that causes the crash.)
Quoted 8 lines
You can git-pull the URI below into v2.6.29-rc1.
Ingo
---------------------->
Please pull the latest x86/pat git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.gitx86/pat
pulled && build, here is the result:
[ 76.170171] BUG: unable to handle kernel NULL pointer dereference at (null) [ 76.178376] IP: [<(null)>] (null) [ 76.180010] PGD 0 [ 76.180010] Oops: 0010 [#1] SMP [ 76.180010] last sysfs file: /sys/devices/pci0000:00/0000:00:0d.0/0000:02:00.0/irq [ 76.180010] CPU 0 [ 76.180010] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_
common v4l2_common videodev usbhid v4l1_compat hid v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core btcx_risc sg pata_amd tveeprom
[ 76.180010] Pid: 0, comm: swapper Not tainted 2.6.29-rc1-ingo-00008-g4fa1489 #1 [ 76.180010] RIP: 0010:[<0000000000000000>] [<(null)>] (null) [ 76.180010] RSP: 0018:ffffffff809a8938 EFLAGS: 00010092 [ 76.180010] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 00000000000003ff [ 76.180010] RDX: 0000000000000020 RSI: 0000000000000400 RDI: 0000000000000020 [ 76.180010] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 76.180010] R10: ffffffff80a00320 R11: 0000000000000000 R12: 0000000000000000 [ 76.180010] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 76.180010] FS: 00007fa7b3ecf740(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 76.180010] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 76.180010] CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0 [ 76.180010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 76.180010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 76.180010] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 76.180010] Stack: [ 76.180010] ffff88007e5c8da0 0000000000000000 0000000000000000 0000000400000000 [ 76.180010] 0000000000000092 00000000803f158f ffffffff809a8a28 ffffffff803f184a [ 76.180010] 0000000000000000 ffffffff809a89a8 0000000000000000 00000000ffffffff [ 76.180010] Call Trace: [ 76.180010] <IRQ> <0> [<ffffffff803f184a>] ? number+0x2aa/0x2d0 [ 76.180010] [<ffffffff8023a518>] ? enqueue_task_fair+0x188/0x2c0 [ 76.180010] [<ffffffff8065a258>] ? printk+0x67/0x6f [ 76.180010] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 76.180010] [<ffffffff8022a267>] ? is_prefetch+0xa7/0x280 [ 76.180010] [<ffffffff8024426e>] ? oops_enter+0xe/0x10 [ 76.180010] [<ffffffff8020fd3b>] ? oops_begin+0x8b/0xa0 [ 76.180010] [<ffffffff8022a7b9>] ? do_page_fault+0x379/0x980 [ 76.180010] [<ffffffff803f24d1>] ? vsnprintf+0x351/0xbb0 [ 76.180010] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 76.180010] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 76.180010] [<ffffffff8023a51c>] ? enqueue_task_fair+0x18c/0x2c0 [ 76.180010] [<ffffffff8023a518>] ? enqueue_task_fair+0x188/0x2c0 [ 76.180010] [<ffffffff80234d90>] ? enqueue_task+0x50/0x60 [ 76.180010] [<ffffffff80234ea2>] ? activate_task+0x22/0x30 [ 76.180010] [<ffffffff80238ae2>] ? try_to_wake_up+0x232/0x2d0 [ 76.180010] [<ffffffff80238b8d>] ? default_wake_function+0xd/0x10 [ 76.180010] [<ffffffff8025a761>] ? autoremove_wake_function+0x11/0x40 [ 76.180010] [<ffffffff80261b59>] ? getnstimeofday+0x59/0xe0 [ 76.180010] [<ffffffff80235842>] ? __wake_up_common+0x52/0x80 [ 76.180010] [<ffffffff802367a3>] ? __wake_up+0x43/0x70 [ 76.180010] [<ffffffff80256c70>] ? delayed_work_timer_fn+0x0/0x40 [ 76.180010] [<ffffffff80256c4c>] ? __queue_work+0x6c/0x90 [ 76.180010] [<ffffffff80256cad>] ? delayed_work_timer_fn+0x3d/0x40 [ 76.180010] [<ffffffff80210f20>] ? update_vsyscall+0xd0/0xe0 [ 76.180010] [<ffffffff8026202f>] ? update_wall_time+0x3ff/0x520 [ 76.180010] [<ffffffff8021b230>] ? post_set+0x20/0x40 [ 76.180010] [<ffffffff8021b6de>] ? generic_set_mtrr+0x11e/0x140 [ 76.180010] [<ffffffff80219457>] ? ipi_handler+0x47/0xb0 [ 76.180010] [<ffffffff8026afa0>] ? generic_smp_call_function_interrupt+0x50/0x100 [ 76.180010] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 76.180010] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 76.180010] <EOI> <0>Code: Bad RIP value. [ 76.180010] RIP [<(null)>] (null) [ 76.180010] RSP <ffffffff809a8938> [ 76.180010] CR2: 0000000000000000 [ 76.180010] ---[ end trace 4da1e896c873962a ]--- [ 76.180010] Kernel panic - not syncing: Fatal exception in interrupt [ 76.180010] ------------[ cut here ]------------ [ 76.180010] WARNING: at kernel/smp.c:299 smp_call_function_many+0x1e9/0x250() [ 76.180010] Hardware name: KFN5-D SLI [ 76.180010] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev usbhid v4l1_compat hid v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core btcx_risc sg pata_amd tveeprom
[ 76.180010] Pid: 0, comm: swapper Tainted: G D 2.6.29-rc1-ingo-00008-g4fa1489 #1 [ 76.180010] Call Trace: [ 76.180010] <IRQ> [<ffffffff802440c0>] warn_slowpath+0xd0/0x130 [ 76.180010] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 76.180010] [<ffffffff8024496d>] ? release_console_sem+0x1dd/0x230 [ 76.180010] [<ffffffff8026adc9>] smp_call_function_many+0x1e9/0x250 [ 76.180010] [<ffffffff80213570>] ? stop_this_cpu+0x0/0x30 [ 76.180010] [<ffffffff8024496d>] ? release_console_sem+0x1dd/0x230 [ 76.180010] [<ffffffff8026ae50>] smp_call_function+0x20/0x30 [ 76.180010] [<ffffffff8021e4c0>] native_smp_send_stop+0x30/0x70 [ 76.180010] [<ffffffff8065a134>] panic+0xa8/0x165 [ 76.180010] [<ffffffff8065d1ef>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 76.180010] [<ffffffff8024496d>] ? release_console_sem+0x1dd/0x230 [ 76.180010] [<ffffffff80244c95>] ? console_unblank+0x75/0x90 [ 76.180010] [<ffffffff8020fca3>] oops_end+0x93/0xa0 [ 76.180010] [<ffffffff8022a864>] do_page_fault+0x424/0x980 [ 76.180010] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 76.180010] [<ffffffff803f184a>] ? number+0x2aa/0x2d0 [ 76.180010] [<ffffffff8023a518>] ? enqueue_task_fair+0x188/0x2c0 [ 76.180010] [<ffffffff8065a258>] ? printk+0x67/0x6f [ 76.180010] [<ffffffff804cc70f>] ? ata_scsi_qc_complete+0x1df/0x4c0 [ 76.180010] [<ffffffff8022a267>] ? is_prefetch+0xa7/0x280 [ 76.180010] [<ffffffff8024426e>] ? oops_enter+0xe/0x10 [ 76.180010] [<ffffffff8020fd3b>] ? oops_begin+0x8b/0xa0 [ 76.180010] [<ffffffff8022a7b9>] ? do_page_fault+0x379/0x980 [ 76.180010] [<ffffffff803f24d1>] ? vsnprintf+0x351/0xbb0 [ 76.180010] [<ffffffff8065cddd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 76.180010] [<ffffffff8065d54f>] ? page_fault+0x1f/0x30 [ 76.180010] [<ffffffff8023a51c>] ? enqueue_task_fair+0x18c/0x2c0 [ 76.180010] [<ffffffff8023a518>] ? enqueue_task_fair+0x188/0x2c0 [ 76.180010] [<ffffffff80234d90>] ? enqueue_task+0x50/0x60 [ 76.180010] [<ffffffff80234ea2>] ? activate_task+0x22/0x30 [ 76.180010] [<ffffffff80238ae2>] ? try_to_wake_up+0x232/0x2d0 [ 76.180010] [<ffffffff80238b8d>] ? default_wake_function+0xd/0x10 [ 76.180010] [<ffffffff8025a761>] ? autoremove_wake_function+0x11/0x40 [ 76.180010] [<ffffffff80261b59>] ? getnstimeofday+0x59/0xe0 [ 76.180010] [<ffffffff80235842>] ? __wake_up_common+0x52/0x80 [ 76.180010] [<ffffffff802367a3>] ? __wake_up+0x43/0x70 [ 76.180010] [<ffffffff80256c70>] ? delayed_work_timer_fn+0x0/0x40 [ 76.180010] [<ffffffff80256c4c>] ? __queue_work+0x6c/0x90 [ 76.180010] [<ffffffff80256cad>] ? delayed_work_timer_fn+0x3d/0x40 [ 76.180010] [<ffffffff80210f20>] ? update_vsyscall+0xd0/0xe0 [ 76.180010] [<ffffffff8026202f>] ? update_wall_time+0x3ff/0x520 [ 76.180010] [<ffffffff8021b230>] ? post_set+0x20/0x40 [ 76.180010] [<ffffffff8021b6de>] ? generic_set_mtrr+0x11e/0x140 [ 76.180010] [<ffffffff80219457>] ? ipi_handler+0x47/0xb0 [ 76.180010] [<ffffffff8026afa0>] ? generic_smp_call_function_interrupt+0x50/0x100 [ 76.180010] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 76.180010] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 76.180010] <EOI> <4>---[ end trace 4da1e896c873962b ]--- [ 86.211282] INFO: RCU detected CPU 1 stall (t=1000 jiffies) [ 86.211282] Pid: 3278, comm: X Tainted: G D W 2.6.29-rc1-ingo-00008-g4fa1489 #1 [ 86.211282] Call Trace: [ 86.211282] <IRQ> [<ffffffff80277cdb>] __rcu_pending+0x7b/0x2c0 [ 86.211282] [<ffffffff80277f4e>] rcu_pending+0x2e/0x70 [ 86.211282] [<ffffffff8024ebee>] update_process_times+0x3e/0x70 [ 86.211282] [<ffffffff8026610d>] tick_sched_timer+0x6d/0xc0 [ 86.211282] [<ffffffff8025d42f>] __run_hrtimer+0x5f/0x130 [ 86.211282] [<ffffffff8025dcf5>] hrtimer_interrupt+0xa5/0x120 [ 86.211282] [<ffffffff8021f7b3>] smp_apic_timer_interrupt+0x83/0xc0 [ 86.211282] [<ffffffff8020c6e3>] apic_timer_interrupt+0x13/0x20 [ 86.211282] <EOI>
This time not even the keyboard leds where blinking, the system was completely dead.
HTH
Torsten
Quoted 16 lines · Torsten Kaiser
Quoted 15 lines · Ingo Molnar
Quoted 12 lines · Torsten Kaiser
Quoted 7 lines · Venkatesh
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Thanks,
VenkiSigned-off-by Venkatesh Pallipadi <[email protected]>Tested-by Torsten Kaiser <[email protected]>
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
The system boots normal and glxgears is accelerated again.
Could you try the tree below as well please?
Before I read this mail, I already tried the tree you send to Linus as a pull request. That worked without a crash, but as expected the DRM related error was still there.
Do you mean today's x86-fixes pull request to Linus? That would be the expected behavior: i separated out the PAT fixes from that tree to be able to progress with those other fixes - while the PAT angle is investigated.
Neither your crash log nor the review of the PAT patches revealed a smoking gun (to me at least), but your crash obviously happened, and it happened right after you pulled the x86-fixes tree.
Quoted 3 lines
pulled && build, here is the result:
[ 76.170171] BUG: unable to handle kernel NULL pointer dereference at (null) [ 76.178376] IP: [<(null)>] (null)
thanks, that's really helpful!
Below is the delta from the minimal patch you tried earlier today, to the full clean patchset.
By all likelyhood, if you apply Venki's patch (which you tested earlier today, and which did not crash and gave back 3D performance to you), and then apply the patch below, you'll get the same crash again.
So the bug is in the diff below. My first guess would be:
-extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size); +extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
we extended 4G to 64-bits on 32-bit systems. If there's a width problem somewhere along the road we can mess the pagetables up real big.
the other possibility would be this hunk:
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return reserve_ram_pages_type(start, end, req_type, new_type);
- else if (is_range_ram < 0)
- return -EINVAL;
+ /*
+ * For legacy reasons, some parts of the physical address range in the
+ * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+ * the e820 tables). So we will track the memory attributes of this
+ * legacy 1MB region using the linear memtype_list always.
+ */
+ if (end >= ISA_END_ADDRESS) {
+ is_range_ram = pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return reserve_ram_pages_type(start, end, req_type,
+ new_type);
+ else if (is_range_ram < 0)
+ return -EINVAL;
+ }
That is this patch's effect:
4fa1489: x86, pat: fix reserve_memtype() for legacy 1MB range
if you have more testing capacity, could you please try tip/master again:
http://people.redhat.com/mingo/tip.git/README
by all likelyhood it will crash for you (it has the PAT fixes included). Then type this:
git revert 4fa1489
Does that solve the crash and give you good 3D performance again?
Ingo
-------------->
arch/x86/include/asm/io.h +1 -1
@@ -91,7 +91,7 @@ extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);extern int ioremap_change_attr (unsigned long vaddr,unsigned long size,unsigned long prot_val); -extern void __iomem *ioremap_wc (unsigned long offset,unsigned long size); +extern void __iomem *ioremap_wc (resource_size_t offset,unsigned long size);/* * early_ioremap() and early_iounmap() are for temporary early boot-time
arch/x86/include/asm/pgtable.h +19 -0
@@ -341,6 +341,25 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)#define canon_pgprot (p) __pgprot(pgprot_val(p) & __supported_pte_mask) +static inline int is_new_memtype_allowed (unsigned long flags, +unsigned long new_flags) +{ +/* +* Certain new memtypes are not allowed with certain +* requested memtype: +* - request is uncached, return cannot be write-back +* - request is write-combine, return cannot be write-back +*/ +if ((flags == _PAGE_CACHE_UC_MINUS && + new_flags == _PAGE_CACHE_WB) || + (flags == _PAGE_CACHE_WC && + new_flags == _PAGE_CACHE_WB)) { +return 0 ; + } + +return 1 ; +} +#ifndef __ASSEMBLY__/* Indicate that x86 has its own track and untrack pfn vma functions */ #define __HAVE_PFNMAP_TRACKING
arch/x86/mm/ioremap.c +1 -1
@@ -367,7 +367,7 @@ EXPORT_SYMBOL(ioremap_nocache);* * Must be freed with iounmap. */ -void __iomem *ioremap_wc (unsigned long phys_addr,unsigned long size) +void __iomem *ioremap_wc (resource_size_t phys_addr,unsigned long size) {if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC,
arch/x86/mm/pageattr.c +6 -4
@@ -555,10 +555,12 @@ repeat:if (!pte_val (old_pte)) {if (!primary)return 0 ; -WARN (1 ,KERN_WARNING "CPA: called for zero pte. " -"vaddr = %lx cpa->vaddr = %lx\n" , address, - *cpa->vaddr); -return -EINVAL ; + +/* +* Special error value returned, indicating that the mapping +* did not exist at this address. +*/ +return -EFAULT ; }if (level ==PG_LEVEL_4K ) {
arch/x86/mm/pat.c +47 -24
109 lines not on this page · raw message
arch/x86/pci/i386.c +1 -11
@@ -314,17 +314,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,return retval;if (flags != new_flags) { -/* -* Do not fallback to certain memory types with certain -* requested type: -* - request is uncached, return cannot be write-back -* - request is uncached, return cannot be write-combine -* - request is write-combine, return cannot be write-back -*/ -if ((flags == _PAGE_CACHE_UC_MINUS && - (new_flags == _PAGE_CACHE_WB)) || - (flags == _PAGE_CACHE_WC && - new_flags == _PAGE_CACHE_WB)) { +if (!is_new_memtype_allowed (flags, new_flags)) {free_memtype (addr, addr+len);return -EINVAL ; }
Quoted 17 lines · Ingo Molnar
Quoted 16 lines · Torsten Kaiser
Quoted 15 lines · Ingo Molnar
Quoted 13 lines · Torsten Kaiser
Quoted 7 lines · Venkatesh
oops. I missed out one file in the earlier test patch. Below is the updated test patch that will go against 29-rc1.
Thanks,
VenkiSigned-off-by Venkatesh Pallipadi <[email protected]>Tested-by Torsten Kaiser <[email protected]>The system boots normal and glxgears is accelerated again.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Could you try the tree below as well please?
Before I read this mail, I already tried the tree you send to Linus as a pull request. That worked without a crash, but as expected the DRM related error was still there.
Do you mean today's x86-fixes pull request to Linus?
Yes, ...
Quoted 3 lines
That would be the
expected behavior: i separated out the PAT fixes from that tree to be able to progress with those other fixes - while the PAT angle is investigated.
... I did see that. I tested the DRM just to be sure that I a) got a kernel without the fix, as I was expecting and b) that this does not trigger any other unhappiness.
But as written yesterday: That tree did not crash and the DRM thing was also in -rc1.
Quoted 8 lines
Neither your crash log nor the review of the PAT patches revealed a smoking gun (to me at least), but your crash obviously happened, and it happened right after you pulled the x86-fixes tree.
Quoted 3 lines
pulled && build, here is the result:
[ 76.170171] BUG: unable to handle kernel NULL pointer dereference at (null) [ 76.178376] IP: [<(null)>] (null)
Quoted 8 lines
thanks, that's really helpful!
Below is the delta from the minimal patch you tried earlier today, to the full clean patchset.
By all likelyhood, if you apply Venki's patch (which you tested earlier today, and which did not crash and gave back 3D performance to you), and then apply the patch below, you'll get the same crash again.
That crash was just your tree without, also without the DRM fix from Venki. In the crashing case its not important anyway, because the system crashed during X startup, so I never even get a chance to run any DRM program. ;-P
Quoted 7 lines
So the bug is in the diff below. My first guess would be:
arch/x86/include/asm/io.h +1
-1-extern void __iomem *ioremap_wc (unsigned long offset,unsigned long size); +extern void __iomem *ioremap_wc (resource_size_t offset,unsigned long size);we extended 4G to 64-bits on 32-bit systems. If there's a width problem somewhere along the road we can mess the pagetables up real big.
I'm on x86_64, so it should be 64bit anyway. But I will not claim to know the current sizes of resource_size_t or unsigned long. ;)
But I do have 4GB RAM and part of it is remapped beyound the 32bit limit.
Quoted 22 lines
the other possibility would be this hunk:
arch/x86/mm/pat.c +14
-5- is_range_ram =pagerange_is_ram (start, end); -if (is_range_ram ==1 ) -return reserve_ram_pages_type (start, end, req_type, new_type); -else if (is_range_ram <0 ) -return -EINVAL ; +/* +* For legacy reasons, some parts of the physical address range in the +* legacy 1MB region is treated as non-RAM (even when listed as RAM in +* the e820 tables). So we will track the memory attributes of this +* legacy 1MB region using the linear memtype_list always. +*/ +if (end >=ISA_END_ADDRESS ) { + is_range_ram =pagerange_is_ram (start, end); +if (is_range_ram ==1 ) +return reserve_ram_pages_type (start, end, req_type, + new_type); +else if (is_range_ram <0 ) +return -EINVAL ; + }
Quoted 3 lines
That is this patch's effect:
4fa1489: x86, pat: fix
reserve_memtype()for legacy 1MB range
reverted that patch und booted => still crashes, but in yet another strange way:
[ 93.160112] int3: 0000 [#1] SMP [ 93.164076] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 93.170009] CPU 0 [ 93.170009] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core usbhid btcx_risc hid tveeprom pata_amd sg
[ 93.170009] Pid: 0, comm: swapper Not tainted 2.6.29-rc1-ingo-00009-geae2f18 #2 [ 93.170009] RIP: 0010:[<ffffffff8099ecc1>] [<ffffffff8099ecc1>] per_cpu__rcu_bh_data+0x1/0xc0 [ 93.170009] RSP: 0018:ffffffff809a8ed8 EFLAGS: 00000286 [ 93.170009] RAX: ffff88011ddf1930 RBX: ffffffff809a8ed0 RCX: ffffffff80a008c8 [ 93.170009] RDX: 00000000000003fc RSI: ffff880028014c00 RDI: ffffffff807e9440 [ 93.170009] RBP: 000000000000000a R08: ffff880028013180 R09: 0000000000000000 [ 93.170009] R10: ffffffff8087fe58 R11: 0000000000000001 R12: ffffffff80261b39 [ 93.170009] R13: 0000000000000100 R14: 000000000000000a R15: ffffffff8099ecc0 [ 93.170009] FS: 00007f2d71cf56f0(0000) GS:ffffffff809b1040(0000) knlGS:0000000000000000 [ 93.170009] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 93.170009] CR2: 00007f2d7185a920 CR3: 0000000000201000 CR4: 00000000000006e0 [ 93.170009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 93.170009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 93.170009] Process swapper (pid: 0, threadinfo ffffffff8087e000, task ffffffff807de360) [ 93.170009] Stack: [ 93.170009] ffffffff809a8ef8 ffffffff80277c12 000000000000000a 0000000000000040 [ 93.170009] ffffffff809a8f38 ffffffff809a8f10 ffffffff8021b230 ffffffff809a8f50 [ 93.170009] ffffffff8021b6de 00000000000e0000 ffff88007c407af8 0000000000000086 [ 93.170009] Call Trace: [ 93.170009] <IRQ> <0> [<ffffffff80277c12>] ? rcu_process_callbacks+0x32/0x60 [ 93.170009] [<ffffffff8021b230>] ? post_set+0x20/0x40 [ 93.170009] [<ffffffff8021b6de>] ? generic_set_mtrr+0x11e/0x140 [ 93.170009] [<ffffffff80219457>] ? ipi_handler+0x47/0xb0 [ 93.170009] [<ffffffff8026af80>] ? generic_smp_call_function_interrupt+0x50/0x100 [ 93.170009] [<ffffffff8021e54f>] ? smp_call_function_interrupt+0x1f/0x30 [ 93.170009] [<ffffffff8020c863>] ? call_function_interrupt+0x13/0x20 [ 93.170009] <EOI> <0>Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc [ 93.170009] RIP [<ffffffff8099ecc1>] per_cpu__rcu_bh_data+0x1/0xc0 [ 93.170009] RSP <ffffffff809a8ed8> [ 93.181327] ---[ end trace e7dd93fe22e9ffa7 ]--- [ 93.181327] Kernel panic - not syncing: Fatal exception in interrupt [ 93.172531] BUG: unable to handle kernel NULL pointer dereference at (null) [ 93.172531] IP: [<ffffffff8026af53>] generic_smp_call_function_interrupt+0x23/0x100 [ 93.172531] PGD 11b918067 PUD 11b83e067 PMD 0 [ 93.172531] Oops: 0000 [#2] SMP [ 93.172531] last sysfs file: /sys/devices/pci0000:00/0000:00:0f.0/0000:01:00.0/enable [ 93.172531] CPU 2 [ 93.172531] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core usbhid btcx_risc hid tveeprom pata_amd sg
[ 93.172531] Pid: 3283, comm: X Tainted: G D 2.6.29-rc1-ingo-00009-geae2f18 #2 [ 93.172531] RIP: 0010:[<ffffffff8026af53>] [<ffffffff8026af53>] generic_smp_call_function_interrupt+0x23/0x100 [ 93.172531] RSP: 0018:ffff88011f127f80 EFLAGS: 00010046 [ 93.172531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88007f13ab80 [ 93.172531] RDX: ffffffff809a2d00 RSI: 0000000000000000 RDI: 0000000000000002 [ 93.172531] RBP: ffff88011f127fa0 R08: 0000000000000000 R09: ffff88011e40f780 [ 93.172531] R10: ffff88007c407e48 R11: 0000000000000000 R12: ffff88011ddf1ee0 [ 93.172531] R13: 0000000000000000 R14: 0000000000000002 R15: ffff88011e59a780 [ 93.172531] FS: 00007f3267f8e6f0(0000) GS:ffff88011f0de000(0000) knlGS:0000000000000000 [ 93.172531] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 93.172531] CR2: 0000000000000000 CR3: 000000011b9b7000 CR4: 00000000000006e0 [ 93.172531] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 93.172531] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 93.172531] Process X (pid: 3283, threadinfo ffff88007c406000, task ffff88007d145700) [ 93.172531] Stack: [ 93.172531] ffff88011e59a780 ffff88007e09c3d8 0000000000000000 ffff88007e09c3d8 [ 93.172531] ffff88011f127fb0 ffffffff8021e54f ffff88007c407c80 ffffffff8020c863 <EOI> [ 93.172531] 841f0ffffffcebe9 ff02680000000000 02e850ec8348ffff 00011b8de8fffff1 [ 93.172531] Call Trace: [ 93.172531] <IRQ> <0> [<ffffffff8021e54f>] smp_call_function_interrupt+0x1f/0x30 [ 93.172531] [<ffffffff8020c863>] call_function_interrupt+0x13/0x20 [ 93.172531] <EOI> <0>Code: e8 d3 0a 05 00 c9 c3 90 55 48 89 e5 41 56 65 44 8b 34 25 24 00 00 00 41 55 41 54 53 48 8b 1d 55 df 57 00 eb 06 0f 1f 00 48 8b 1b <48> 8b 03 48 81 fb a0 8e 7e 80 0f 18 08 0f 84 9a 00 00 00 4c 8d [ 93.172531] RIP [<ffffffff8026af53>] generic_smp_call_function_interrupt+0x23/0x100 [ 93.172531] RSP <ffff88011f127f80> [ 93.172531] CR2: 0000000000000000 [ 93.172531] ---[ end trace e7dd93fe22e9ffa8 ]--- [ 93.172531] Kernel panic - not syncing: Fatal exception in interrupt [ 93.172531] ------------[ cut here ]------------ [ 93.172531] WARNING: at kernel/smp.c:299 smp_call_function_many+0x1e9/0x250() [ 93.172531] Hardware name: KFN5-D SLI [ 93.172531] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core usbhid btcx_risc hid tveeprom pata_amd sg
[ 93.172531] Pid: 3283, comm: X Tainted: G D 2.6.29-rc1-ingo-00009-geae2f18 #2 [ 93.172531] Call Trace: [ 93.172531] <IRQ> [<ffffffff802440a0>] warn_slowpath+0xd0/0x130 [ 93.172531] [<ffffffff8065d1cf>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff8026ada9>] smp_call_function_many+0x1e9/0x250 [ 93.172531] [<ffffffff80213570>] ? stop_this_cpu+0x0/0x30 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff8026ae30>] smp_call_function+0x20/0x30 [ 93.172531] [<ffffffff8021e4c0>] native_smp_send_stop+0x30/0x70 [ 93.172531] [<ffffffff8065a114>] panic+0xa8/0x165 [ 93.172531] [<ffffffff8065d1cf>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff80244c75>] ? console_unblank+0x75/0x90 [ 93.172531] [<ffffffff8020fca3>] oops_end+0x93/0xa0 [ 93.172531] [<ffffffff8022a864>] do_page_fault+0x424/0x980 [ 93.172531] [<ffffffff80261b39>] ? getnstimeofday+0x59/0xe0 [ 93.172531] [<ffffffff8065cdbd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 93.172531] [<ffffffff8065d52f>] page_fault+0x1f/0x30 [ 93.172531] [<ffffffff8026af53>] ? generic_smp_call_function_interrupt+0x23/0x100 [ 93.172531] [<ffffffff8021e54f>] smp_call_function_interrupt+0x1f/0x30 [ 93.172531] [<ffffffff8020c863>] call_function_interrupt+0x13/0x20 [ 93.172531] <EOI> <4>---[ end trace e7dd93fe22e9ffa9 ]--- [ 93.172531] ------------[ cut here ]------------ [ 93.172531] WARNING: at kernel/smp.c:220 smp_call_function_single+0xa7/0x110() [ 93.172531] Hardware name: KFN5-D SLI [ 93.172531] Modules linked in: w83792d tuner tea5767 tda8290
tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tvaudio msp3400 bttv ir_common v4l2_common videodev v4l1_compat v4l2_compat_ioctl32 videobuf_dma_sg videobuf_core usbhid btcx_risc hid tveeprom pata_amd sg
[ 93.172531] Pid: 3283, comm: X Tainted: G D W 2.6.29-rc1-ingo-00009-geae2f18 #2 [ 93.172531] Call Trace: [ 93.172531] <IRQ> [<ffffffff802440a0>] warn_slowpath+0xd0/0x130 [ 93.172531] [<ffffffff8065a063>] ? dump_stack+0x72/0x7b [ 93.172531] [<ffffffff8026ba97>] ? print_modules+0x57/0xb0 [ 93.172531] [<ffffffff802440ba>] ? warn_slowpath+0xea/0x130 [ 93.172531] [<ffffffff8065d1cf>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff8026ab57>] smp_call_function_single+0xa7/0x110 [ 93.172531] [<ffffffff8026ad7a>] smp_call_function_many+0x1ba/0x250 [ 93.172531] [<ffffffff80213570>] ? stop_this_cpu+0x0/0x30 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff8026ae30>] smp_call_function+0x20/0x30 [ 93.172531] [<ffffffff8021e4c0>] native_smp_send_stop+0x30/0x70 [ 93.172531] [<ffffffff8065a114>] panic+0xa8/0x165 [ 93.172531] [<ffffffff8065d1cf>] ? _spin_unlock_irqrestore+0x2f/0x40 [ 93.172531] [<ffffffff8024494d>] ? release_console_sem+0x1dd/0x230 [ 93.172531] [<ffffffff80244c75>] ? console_unblank+0x75/0x90 [ 93.172531] [<ffffffff8020fca3>] oops_end+0x93/0xa0 [ 93.172531] [<ffffffff8022a864>] do_page_fault+0x424/0x980 [ 93.172531] [<ffffffff80261b39>] ? getnstimeofday+0x59/0xe0 [ 93.172531] [<ffffffff8065cdbd>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 93.172531] [<ffffffff8065d52f>] page_fault+0x1f/0x30 [ 93.172531] [<ffffffff8026af53>] ? generic_smp_call_function_interrupt+0x23/0x100 [ 93.172531] [<ffffffff8021e54f>] smp_call_function_interrupt+0x1f/0x30 [ 93.172531] [<ffffffff8020c863>] call_function_interrupt+0x13/0x20 [ 93.172531] <EOI> <4>---[ end trace e7dd93fe22e9ffaa ]---
Similar additional warning where also on the very first crash that just like this one also left the keyboard leds blinking. I did not post them for the first crash, because I suspected that these WARNINGs where just triggered because the first Oops messed something up.
Quoted 1 line
if you have more testing capacity, could you please try tip/master again:
I will see, if I find time to test tip/master later...
Quoted 8 lines
http://people.redhat.com/mingo/tip.git/README
by all likelyhood it will crash for you (it has the PAT fixes included). Then type this:
git revert 4fa1489
Does that solve the crash and give you good 3D performance again?
Reverting 4fa1489 did not help.
Output from git log from the tree I tested:eae2f1895569e51a97f359759826519f7e0f2a61 Revert "x86, pat: fix reserve_memtype() for legacy 1MB range" 4fa1489d2a74c1e3c6231f449d73ce46131523ae x86, pat: fix reserve_memtype() for legacy 1MB range 895252ccb3050383e1dcf2c2536065e346c2fa14 x86 PAT: remove CPA WARN_ON for zero pte838b120c59b530ba58cc0197d208d08455733472 x86 PAT: ioremap_wc should take resource_size_t parameter 283c81fe6568202db345649e874d2a0f29dc5a84 x86 PAT: return compatible mapping to remap_pfn_range callers dfed11010f7b2d994444bcd83ec4cc7e80d7d030 x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param a8eae3321ea94fe06c6a76b48cc6a082116b1784 x86 PAT: consolidate old memtype new memtype check into a function 18d82ebde7e40bf67c84b505a12be26133a89932 x86 PAT: remove PFNMAP type on track_pfn_vma_new() error ae04d1401577bb63151480a053057de58b8e10bb powerpc: Fix cpufreq drivers after cpufreq core changes c59765042f53a79a7a65585042ff463b69cb248c Linux 2.6.29-rc1
I could not test the 3D performance, as X kept killing the system on startup. ;) But as already written: Just the fix from Venkatesh alone did fix 3D for me and did not result in any crashes.
Torsten
Linus,
Quoted 3 lines · Torsten Kaiser
pulled && build, here is the result:
[ 76.170171] BUG: unable to handle kernel NULL pointer dereference at (null) [ 76.178376] IP: [<(null)>] (null)
this test result from Torsten establishes it beyond doubt that the current x86-fixes-for-linus lineup is safe to pull.
We'll work with Toralf to pin down the PAT crash as well, and will send those fixes once they work fine on Toralf's box.
Ingo