Skip to contentSkip to conversation

question about sensor sel

DISCUSSION 阿桂 2 participants 4 messages Apr 26, 2020 – Apr 28, 2020

lore
Share & tools
lore

阿桂

author
#0 lore raw

Hi, all:

Why is the result empty when I run 'ipmitool sel list', as follows:

root@lon:/var/log# ipmitool sel list
SEL has no entries

Below is what I changed:

1. I added yaml config file of those sensors 'ipmi-sensors.yaml'

2. I added below compling option to module 'phosphor-sel-logger''; EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"

3. I modified the config settings of rsyslog as https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html refer to.

    so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;

Below two commands can get wanted results. But why the command 'ipmitool sel list' can't? what else should I modify?

root@lon:/var/log# ipmitool sensor list
ambient_temp     | na         |            | na    | na        | na        | na        | na        | na        | na        
cpu0_temp          | na         |            | na    | na        | na        | na        | na        | na        | na        
cpu1_temp          | na         |            | na    | na        | na        | na        | na        | na        | na        
psu_vol_in          | 12.031     | Volts      | ok    | 0.000     | 10.971    | 11.448    | 12.985    | 13.462    | 0.000     
psu_curr_in         | 0.275      | Amps       | ok    | 0.000     | 0.275     | 0.550     | 49.775    | 69.850    | 0.000     
psu_power_in     | 3.150      | Watts      | ok    | 0.000     | 3.150     | 6.300     | 497.700   | 796.950   | 0.000     
battery         | 0.345      | Volts      | ok    | 0.000     | 1.995     | 2.490     | 3.300     | 3.495     | 0.000     
fan1             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan2             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan3             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan4             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan5             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan6             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan7             | na         |            | na    | na        | na        | na        | na        | na        | na        
fan8             | na         |            | na    | na        | na        | na        | na        | na        | na   
root@lon:/var/log# journalctl |grep sel
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a warning low threshold going low. Reading=0.344000 Threshold=2.500000.
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a critical low threshold going low. Reading=0.344000 Threshold=2.000000.
Apr 25 15:16:36 lon sel-logger[240]: psu_curr_in sensor crossed a warning low threshold going low. Reading=0.361000 Threshold=0.600000.
Apr 25 15:16:36 lon sel-logger[240]: psu_power_in sensor crossed a warning low threshold going low. Reading=4.667744 Threshold=6.500000.
root@lon:/var/log# ls  
ipmi_sel          lastlog           obmc-console.log  private/          redfish           state             tallylog    
root@lon:/var/log# cat ipmi_sel 
2020-04-25T15:16:36.125187+00:00 1,2,50FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.245679+00:00 1,2,52FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.705420+00:00 2,2,50FFFF,20,/xyz/openbmc_project/sensors/current/psu_curr_in,1
2020-04-25T15:16:36.764327+00:00 3,2,50FFFF,20,/xyz/openbmc_project/sensors/power/psu_power_in,1
root@lon:/var/log# cat redfish 
2020-04-25T15:16:19.003251+00:00 OpenBMC.0.1.ServiceFailure,phosphor-pid-control.service
2020-04-25T15:16:36.125187+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,battery,0.344000,2.500000
2020-04-25T15:16:36.245679+00:00 OpenBMC.0.1.SensorThresholdCriticalLowGoingLow,battery,0.344000,2.000000
2020-04-25T15:16:36.705420+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_curr_in,0.361000,0.600000
2020-04-25T15:16:36.764327+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_power_in,4.667744,6.500000
2020-04-25T15:16:51.611885+00:00 OpenBMC.0.1.ServiceFailure,[email protected]
#1 lore raw
Quoted 10 lines · 阿桂

Hi, all:

Why is the result empty when I run 'ipmitool sel list', as follows:

root@lon:/var/log# ipmitool sel list
SEL has no entries

Below is what I changed:

1. I added yaml config file of those sensors 'ipmi-sensors.yaml'

Quoted 8 lines

2. I added below compling option to module 'phosphor-sel-logger''; EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"

3. I modified the config settings of rsyslog as https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html refer to. so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;

Below two commands can get wanted results. But why the command 'ipmitool sel list' can't? what else should I modify?

It looks like the only thing missing is the override to the IPMI Get SEL Entry command to make it look in the /var/log/ipmi_sel file instead of on D-Bus.

You can find the override implemented in intel-ipmi-oem, here: https://github.com/openbmc/intel-ipmi-oem/blob/master/src/storagecommands.cpp#L827.

Quoted 57 lines
root@lon:/var/log# ipmitool sensor list
ambient_temp     | na         |            | na    | na        | na      
   | na        | na        | na        | na
cpu0_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
cpu1_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
psu_vol_in          | 12.031     | Volts      | ok    | 0.000     | 10.971    | 11.448    | 12.985    | 13.462    | 0.000
psu_curr_in         | 0.275      | Amps       | ok    | 0.000     | 0.275     | 0.550     | 49.775    | 69.850    | 0.000
psu_power_in     | 3.150      | Watts      | ok    | 0.000     | 3.150  
    | 6.300     | 497.700   | 796.950   | 0.000
battery         | 0.345      | Volts      | ok    | 0.000     | 1.995    
  | 2.490     | 3.300     | 3.495     | 0.000
fan1             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan2             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan3             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan4             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan5             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan6             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan7             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan8             | na         |            | na    | na        | na      
   | na        | na        | na        | na
root@lon:/var/log# journalctl |grep sel
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a warning low threshold going low. Reading=0.344000 Threshold=2.500000.
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a critical low threshold going low. Reading=0.344000 Threshold=2.000000.
Apr 25 15:16:36 lon sel-logger[240]: psu_curr_in sensor crossed a warning low threshold going low. Reading=0.361000 Threshold=0.600000.
Apr 25 15:16:36 lon sel-logger[240]: psu_power_in sensor crossed a warning low threshold going low. Reading=4.667744 Threshold=6.500000.
root@lon:/var/log# ls
ipmi_sel          lastlog           obmc-console.log  private/          redfish           state             tallylog
root@lon:/var/log# cat ipmi_sel
2020-04-25T15:16:36.125187+00:00 1,2,50FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.245679+00:00 1,2,52FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.705420+00:00 2,2,50FFFF,20,/xyz/openbmc_project/sensors/current/psu_curr_in,1
2020-04-25T15:16:36.764327+00:00 3,2,50FFFF,20,/xyz/openbmc_project/sensors/power/psu_power_in,1
root@lon:/var/log# cat redfish
2020-04-25T15:16:19.003251+00:00 OpenBMC.0.1.ServiceFailure,phosphor-pid-control.service
2020-04-25T15:16:36.125187+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,battery,0.344000,2.500000
2020-04-25T15:16:36.245679+00:00 OpenBMC.0.1.SensorThresholdCriticalLowGoingLow,battery,0.344000,2.000000
2020-04-25T15:16:36.705420+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_curr_in,0.361000,0.600000
2020-04-25T15:16:36.764327+00:00 OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_power_in,4.667744,6.500000
2020-04-25T15:16:51.611885+00:00 OpenBMC.0.1.ServiceFailure,[email protected]
author
#2 lore raw

Thanks very much. I will try to thant

Quoted 105 lines · Jason M
Quoted 13 lines · 阿桂

Hi, all:

Why is the result empty when I run 'ipmitool sel list', as follows:

root@lon:/var/log# ipmitool sel list
SEL has no entries

Below is what I changed:

1. I added yaml config file of those sensors 'ipmi-sensors.yaml'

2. I added below compling option to module 'phosphor-sel-logger''; EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"

Quoted 8 lines

3. I modified the config settings of rsyslog as
https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html
refer to.

     so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;

Below two commands can get wanted results. But why the command 'ipmitool sel list' can't? what else should I modify?

It looks like the only thing missing is the override to the IPMI Get SEL Entry command to make it look in the /var/log/ipmi_sel file instead of on D-Bus.

You can find the override implemented in intel-ipmi-oem, here:
https://github.com/openbmc/intel-ipmi-oem/blob/master/src/storagecommands.cpp#L827.

Quoted 74 lines
root@lon:/var/log# ipmitool sensor list
ambient_temp     | na         |            | na    | na        | na      
   | na        | na        | na        | na
cpu0_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
cpu1_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
psu_vol_in          | 12.031     | Volts      | ok    | 0.000     | 
10.971    | 11.448    | 12.985    | 13.462    | 0.000
psu_curr_in         | 0.275      | Amps       | ok    | 0.000     | 
0.275     | 0.550     | 49.775    | 69.850    | 0.000
psu_power_in     | 3.150      | Watts      | ok    | 0.000     | 3.150  
    | 6.300     | 497.700   | 796.950   | 0.000
battery         | 0.345      | Volts      | ok    | 0.000     | 1.995    
  | 2.490     | 3.300     | 3.495     | 0.000
fan1             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan2             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan3             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan4             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan5             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan6             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan7             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan8             | na         |            | na    | na        | na      
   | na        | na        | na        | na
root@lon:/var/log# journalctl |grep sel
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a warning 
low threshold going low. Reading=0.344000 Threshold=2.500000.
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a critical 
low threshold going low. Reading=0.344000 Threshold=2.000000.
Apr 25 15:16:36 lon sel-logger[240]: psu_curr_in sensor crossed a 
warning low threshold going low. Reading=0.361000 Threshold=0.600000.
Apr 25 15:16:36 lon sel-logger[240]: psu_power_in sensor crossed a 
warning low threshold going low. Reading=4.667744 Threshold=6.500000.
root@lon:/var/log# ls
ipmi_sel          lastlog           obmc-console.log  private/          
redfish           state             tallylog
root@lon:/var/log# cat ipmi_sel
2020-04-25T15:16:36.125187+00:00 
1,2,50FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.245679+00:00 
1,2,52FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.705420+00:00 
2,2,50FFFF,20,/xyz/openbmc_project/sensors/current/psu_curr_in,1
2020-04-25T15:16:36.764327+00:00 
3,2,50FFFF,20,/xyz/openbmc_project/sensors/power/psu_power_in,1
root@lon:/var/log# cat redfish
2020-04-25T15:16:19.003251+00:00 
OpenBMC.0.1.ServiceFailure,phosphor-pid-control.service
2020-04-25T15:16:36.125187+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,battery,0.344000,2.500000
2020-04-25T15:16:36.245679+00:00 
OpenBMC.0.1.SensorThresholdCriticalLowGoingLow,battery,0.344000,2.000000
2020-04-25T15:16:36.705420+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_curr_in,0.361000,0.600000
2020-04-25T15:16:36.764327+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_power_in,4.667744,6.500000
2020-04-25T15:16:51.611885+00:00 
OpenBMC.0.1.ServiceFailure,[email protected]
author
#3 lore raw

Hi,
I didn't add this module. But, when I add "intel-ipmi-oem" module, commond "ipmitool sel list" Seems to work fine; "ipmitool sel elist" still report "Error obtaining SDR info: Requested sensor, data, or record not found"

Furthermore, "ipmitool fru" and "ipmitool sensor" becomme not work well.

By the way, if I want to show SEL in webUI event log ,what should I do?

Log:

root@lon:~# ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
Error obtaining SDR info: Requested sensor, data, or record not found
root@lon:~# ipmitool sdr
Error obtaining SDR info: Requested sensor, data, or record not found
Unable to open SDR for reading
root@lon:~# ipmitool sensor
Error obtaining SDR info: Requested sensor, data, or record not found
Unable to open SDR for reading
root@lon:~# ipmitool sel elist
Error obtaining SDR info: Requested sensor, data, or record not found
Unable to open SDR for reading
   1 | 04/28/20 | 02:16:32 UTC | Voltage #0x0a | Lower Non-critical going low  | Asserted
Error obtaining SDR info: Requested sensor, data, or record not found
Unable to open SDR for reading
   2 | 04/28/20 | 02:16:33 UTC | Current | Lower Non-critical going low  | Asserted
Error obtaining SDR info: Requested sensor, data, or record not found
Unable to open SDR for reading
   3 | 04/28/20 | 02:16:34 UTC | Other #0x09 | Lower Non-critical going low  | Asserted
root@lon:~# ipmitool sel list 
   1 | 04/28/20 | 02:16:32 UTC | Voltage #0x0a | Lower Non-critical going low  | Asserted
   2 | 04/28/20 | 02:16:33 UTC | Current | Lower Non-critical going low  | Asserted
   3 | 04/28/20 | 02:16:34 UTC | Other #0x09 | Lower Non-critical going low  | Asserted

在 2020-04-28 16:37:15,"[email protected]" <[email protected]> 写道: Hi,

Do you install openbmc/intel-ipmi-oem module?

https://github.com/openbmc/intel-ipmi-oem

Thanks,

Troy Lee

From: openbmc <[email protected]> On Behalf Of 阿桂
Sent: Sunday, April 26, 2020 11:37 AM
To: [email protected]; [email protected]
Subject: [ExternalEmail] question aboat sensor sel

在 2020-04-28 09:24:14,"阿桂" <[email protected]> 写道:

Thanks very much. I will try to do that

Quoted 105 lines · Jason M
Quoted 13 lines · 阿桂

Hi, all:

Why is the result empty when I run 'ipmitool sel list', as follows:

root@lon:/var/log# ipmitool sel list
SEL has no entries

Below is what I changed:

1. I added yaml config file of those sensors 'ipmi-sensors.yaml'

2. I added below compling option to module 'phosphor-sel-logger''; EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"

Quoted 8 lines

3. I modified the config settings of rsyslog as
https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html
refer to.

     so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;

Below two commands can get wanted results. But why the command 'ipmitool sel list' can't? what else should I modify?

It looks like the only thing missing is the override to the IPMI Get SEL Entry command to make it look in the /var/log/ipmi_sel file instead of on D-Bus.

You can find the override implemented in intel-ipmi-oem, here:
https://github.com/openbmc/intel-ipmi-oem/blob/master/src/storagecommands.cpp#L827.

Quoted 74 lines
root@lon:/var/log# ipmitool sensor list
ambient_temp     | na         |            | na    | na        | na      
   | na        | na        | na        | na
cpu0_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
cpu1_temp          | na         |            | na    | na        | na    
     | na        | na        | na        | na
psu_vol_in          | 12.031     | Volts      | ok    | 0.000     | 
10.971    | 11.448    | 12.985    | 13.462    | 0.000
psu_curr_in         | 0.275      | Amps       | ok    | 0.000     | 
0.275     | 0.550     | 49.775    | 69.850    | 0.000
psu_power_in     | 3.150      | Watts      | ok    | 0.000     | 3.150  
    | 6.300     | 497.700   | 796.950   | 0.000
battery         | 0.345      | Volts      | ok    | 0.000     | 1.995    
  | 2.490     | 3.300     | 3.495     | 0.000
fan1             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan2             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan3             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan4             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan5             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan6             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan7             | na         |            | na    | na        | na      
   | na        | na        | na        | na
fan8             | na         |            | na    | na        | na      
   | na        | na        | na        | na
root@lon:/var/log# journalctl |grep sel
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a warning 
low threshold going low. Reading=0.344000 Threshold=2.500000.
Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a critical 
low threshold going low. Reading=0.344000 Threshold=2.000000.
Apr 25 15:16:36 lon sel-logger[240]: psu_curr_in sensor crossed a 
warning low threshold going low. Reading=0.361000 Threshold=0.600000.
Apr 25 15:16:36 lon sel-logger[240]: psu_power_in sensor crossed a 
warning low threshold going low. Reading=4.667744 Threshold=6.500000.
root@lon:/var/log# ls
ipmi_sel          lastlog           obmc-console.log  private/          
redfish           state             tallylog
root@lon:/var/log# cat ipmi_sel
2020-04-25T15:16:36.125187+00:00 
1,2,50FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.245679+00:00 
1,2,52FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
2020-04-25T15:16:36.705420+00:00 
2,2,50FFFF,20,/xyz/openbmc_project/sensors/current/psu_curr_in,1
2020-04-25T15:16:36.764327+00:00 
3,2,50FFFF,20,/xyz/openbmc_project/sensors/power/psu_power_in,1
root@lon:/var/log# cat redfish
2020-04-25T15:16:19.003251+00:00 
OpenBMC.0.1.ServiceFailure,phosphor-pid-control.service
2020-04-25T15:16:36.125187+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,battery,0.344000,2.500000
2020-04-25T15:16:36.245679+00:00 
OpenBMC.0.1.SensorThresholdCriticalLowGoingLow,battery,0.344000,2.000000
2020-04-25T15:16:36.705420+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_curr_in,0.361000,0.600000
2020-04-25T15:16:36.764327+00:00 
OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_power_in,4.667744,6.500000
2020-04-25T15:16:51.611885+00:00 
OpenBMC.0.1.ServiceFailure,[email protected]