Skip to contentSkip to conversation

Support attaching PASID to the blocked_domain

PATCH Superseded Yi Liu 2 participants 15 messages Nov 8, 2024 – Nov 11, 2024

Subsystems (5)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Yi Liu

author
#0 lore raw

v4 cover Support attaching PASID to the blocked_domain

During the review of iommufd pasid series, Kevin and Jason suggested attaching PASID to the blocked domain hence replacing the usage of remove_dev_pasid() op [1]. This makes sense as it makes the PASID path aligned with the RID path which attaches the RID to the blocked_domain when it is to be blocked. To do it, it requires passing the old domain to the iommu driver. This has been done in [2].

This series makes the Intel iommu driver, ARM SMMUv3 driver and AMD iommu driver support attaching PASID to the blocked domain. And in the end remove the remove_dev_pasid op from iommu_ops.

[1] https://lore.kernel.org/linux-iommu/[email protected]/
[2] https://lore.kernel.org/linux-iommu/[email protected]/

v4:
- Remove unnecessary braces in patch 02 (Vasant)
- Minor tweaks to patch 01 and 03 (Kevin)
- Add r-b tags from Jason, Vasant, Kevin

v3: https://lore.kernel.org/linux-iommu/[email protected]/
- Add a patch to check remove_dev_pasid() in iommu_attach_device_pasid()
- Split patch 01 of v2 into two patches, drop the r-b of this patch due the split.
- Add AMD iommu blocked domain pasid support (Jason)
- Remove the remove_dev_pasid op as all the iommu drivers that support pasid attach have supported attaching pasid to blocked domain.

v2: https://lore.kernel.org/linux-iommu/[email protected]/#t
- Add Kevin's r-b
- Adjust the order of patch 03 of v1, it should be the first patch (Baolu)

v1: https://lore.kernel.org/linux-iommu/[email protected]/

Regards,
Yi Liu

Jason Gunthorpe (1):
iommu/arm-smmu-v3: Make the blocked domain support PASID

Yi Liu (6):
iommu: Prevent pasid attach if no ops->remove_dev_pasid
iommu: Consolidate the ops->remove_dev_pasid usage into a helper
iommu: Detaching pasid by attaching to the blocked_domain iommu/vt-d: Make the blocked domain support PASID iommu/amd: Make the blocked domain support PASID
iommu: Remove the remove_dev_pasid op

 drivers/iommu/amd/iommu.c                   | 10 +++++++-
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 12 ++++-----
 drivers/iommu/intel/iommu.c                 | 15 ++++++++---
 drivers/iommu/iommu.c                       | 28 +++++++++++++--------
 include/linux/iommu.h                       |  5 ----
 5 files changed, 44 insertions(+), 26 deletions(-)
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v4 1/7 iommu: Prevent pasid attach if no ops->remove_dev_pasid

driver should implement both set_dev_pasid and remove_dev_pasid op, otherwise it is a problem how to detach pasid. In reality, it is impossible that an iommu driver implements set_dev_pasid() but no remove_dev_pasid() op. However, it is better to check it.

---
 drivers/iommu/iommu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/iommu/iommu.c +4 -2
index 13fcd9d8f2df..1c689e57928e 100644
@@ -3352,17 +3352,19 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
 			      struct iommu_attach_handle *handle)
 {
 	/* Caller must be a probed driver on dev */
+	const struct iommu_ops *ops = dev_iommu_ops(dev);
 	struct iommu_group *group = dev->iommu_group;
 	struct group_device *device;
 	int ret;
 
-	if (!domain->ops->set_dev_pasid)
+	if (!domain->ops->set_dev_pasid ||
+	    !ops->remove_dev_pasid)
 		return -EOPNOTSUPP;
 
 	if (!group)
 		return -ENODEV;
 
-	if (!dev_has_iommu(dev) || dev_iommu_ops(dev) != domain->owner ||
+	if (!dev_has_iommu(dev) || ops != domain->owner ||
 	    pasid == IOMMU_NO_PASID)
 		return -EINVAL;
 
Signature · 1 line
2.34.1
maintainer
#2 lore raw

Re: [PATCH v4 1/7] iommu: Prevent pasid attach if no ops->remove_dev_pasid

Quoted 22 lines · Yi Liu

driver should implement both set_dev_pasid and remove_dev_pasid op, otherwise it is a problem how to detach pasid. In reality, it is impossible that an iommu driver implements set_dev_pasid() but no remove_dev_pasid() op. However, it is better to check it.

---
  drivers/iommu/iommu.c | 6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)
drivers/iommu/iommu.c +1 -0
index 13fcd9d8f2df..1c689e57928e 100644
@@ -3352,17 +3352,19 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
  			      struct iommu_attach_handle *handle)
  {
  	/* Caller must be a probed driver on dev */
+	const struct iommu_ops *ops = dev_iommu_ops(dev);
  	struct iommu_group *group = dev->iommu_group;

drivers/iommu/iommu.c int iommu_attach_device_pasid(struct iommu_domain *domain, · line 3365

Quoted 10 lines
drivers/iommu/iommu.c +2 -1
  	struct group_device *device;
  	int ret;
 
-	if (!domain->ops->set_dev_pasid)
+	if (!domain->ops->set_dev_pasid ||
+	    !ops->remove_dev_pasid)
  		return -EOPNOTSUPP;
 
  	if (!group)
  		return -ENODEV;

If group is NULL, calling dev_iommu_ops() will trigger a kernel NULL pointer reference warning, which is unintended. If you need to check ops->remove_dev_pasid, it should be done after the group check.

drivers/iommu/iommu.c int iommu_attach_device_pasid(struct iommu_domain *domain, · line 3370

Quoted 6 lines
drivers/iommu/iommu.c +1 -1
-	if (!dev_has_iommu(dev) || dev_iommu_ops(dev) != domain->owner ||
+	if (!dev_has_iommu(dev) || ops != domain->owner ||
  	    pasid == IOMMU_NO_PASID)
  		return -EINVAL;
 

--
baolu

author
#3 lore raw

Re: [PATCH v4 1/7] iommu: Prevent pasid attach if no ops->remove_dev_pasid

Quoted 28 lines · Baolu Lu
Quoted 27 lines · Yi Liu

driver should implement both set_dev_pasid and remove_dev_pasid op, otherwise it is a problem how to detach pasid. In reality, it is impossible that an iommu driver implements set_dev_pasid() but no remove_dev_pasid() op. However, it is better to check it.

---
  drivers/iommu/iommu.c | 6 ++++--

  1 file changed, 4 insertions(+), 2 deletions(-)
drivers/iommu/iommu.c +2 -1
index 13fcd9d8f2df..1c689e57928e 100644
@@ -3352,17 +3352,19 @@ int iommu_attach_device_pasid(struct iommu_domain 
 *domain,
                     struct iommu_attach_handle *handle)
   {
       /* Caller must be a probed driver on dev */
+    const struct iommu_ops *ops = dev_iommu_ops(dev);
       struct iommu_group *group = dev->iommu_group;
       struct group_device *device;
       int ret;
-    if (!domain->ops->set_dev_pasid)
+    if (!domain->ops->set_dev_pasid ||
Quoted 9 lines

drivers/iommu/iommu.c int iommu_attach_device_pasid(struct iommu_domain *domain, · line 3365

Quoted 4 lines
drivers/iommu/iommu.c +1 -0
+        !ops->remove_dev_pasid)
           return -EOPNOTSUPP;
       if (!group)
           return -ENODEV;

If group is NULL, calling dev_iommu_ops() will trigger a kernel NULL pointer reference warning, which is unintended. If you need to check ops->remove_dev_pasid, it should be done after the group check.

good catch. Let me fix it.

Signature · 2 lines
Regards,
Yi Liu
author
#4 lore raw

PATCH v4 2/7 iommu: Consolidate the ops->remove_dev_pasid usage into a helper

In reply to Yi Liu

Add a wrapper for the ops->remove_dev_pasid, this consolidates the iommu_ops fetching and callback invoking. It is also a preparation for starting the transition from using remove_dev_pasid op to detach pasid to the way using blocked_domain to detach pasid.

---
 drivers/iommu/iommu.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/iommu/iommu.c +11 -8
index 1c689e57928e..819c6e0188d5 100644
@@ -3298,6 +3298,14 @@ bool iommu_group_dma_owner_claimed(struct iommu_group *group)
 }
 EXPORT_SYMBOL_GPL(iommu_group_dma_owner_claimed);
 
+static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
+				   struct iommu_domain *domain)
+{
+	const struct iommu_ops *ops = dev_iommu_ops(dev);
+
+	ops->remove_dev_pasid(dev, pasid, domain);
+}
+
 static int __iommu_set_group_pasid(struct iommu_domain *domain,
 				   struct iommu_group *group, ioasid_t pasid)
 {
@@ -3316,11 +3324,9 @@ static int __iommu_set_group_pasid(struct iommu_domain *domain,
 err_revert:
 	last_gdev = device;
 	for_each_group_device(group, device) {
-		const struct iommu_ops *ops = dev_iommu_ops(device->dev);
-
 		if (device == last_gdev)
 			break;
-		ops->remove_dev_pasid(device->dev, pasid, domain);
+		iommu_remove_dev_pasid(device->dev, pasid, domain);
 	}
 	return ret;
 }
@@ -3330,12 +3336,9 @@ static void __iommu_remove_group_pasid(struct iommu_group *group,
 				       struct iommu_domain *domain)
 {
 	struct group_device *device;
-	const struct iommu_ops *ops;
 
-	for_each_group_device(group, device) {
-		ops = dev_iommu_ops(device->dev);
-		ops->remove_dev_pasid(device->dev, pasid, domain);
-	}
+	for_each_group_device(group, device)
+		iommu_remove_dev_pasid(device->dev, pasid, domain);
 }
 
 /*
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 2/7
#5 lore raw

Re: [PATCH v4 2/7] iommu: Consolidate the ops->remove_dev_pasid usage into a helper

Quoted 5 lines · Yi Liu

Add a wrapper for the ops->remove_dev_pasid, this consolidates the iommu_ops fetching and callback invoking. It is also a preparation for starting the transition from using remove_dev_pasid op to detach pasid to the way using blocked_domain to detach pasid.

Quoted 7 lines
---
  drivers/iommu/iommu.c | 19 +++++++++++--------
  1 file changed, 11 insertions(+), 8 deletions(-)
author
#6 lore raw

PATCH v4 3/7 iommu: Detaching pasid by attaching to the blocked_domain

In reply to Yi Liu

The iommu drivers are on the way to detach pasid by attaching to the blocked domain. However, this cannot be done in one shot. During the transition, iommu core would select between the remove_dev_pasid op and the blocked domain.

---
 drivers/iommu/iommu.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/iommu/iommu.c +14 -2
index 819c6e0188d5..6fd4b904f270 100644
@@ -3302,8 +3302,18 @@ static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
 				   struct iommu_domain *domain)
 {
 	const struct iommu_ops *ops = dev_iommu_ops(dev);
+	struct iommu_domain *blocked_domain = ops->blocked_domain;
+	int ret = 1;
 
-	ops->remove_dev_pasid(dev, pasid, domain);
+	if (blocked_domain && blocked_domain->ops->set_dev_pasid) {
+		ret = blocked_domain->ops->set_dev_pasid(blocked_domain,
+							 dev, pasid, domain);
+	} else {
+		ops->remove_dev_pasid(dev, pasid, domain);
+		ret = 0;
+	}
+
+	WARN_ON(ret);
 }
 
 static int __iommu_set_group_pasid(struct iommu_domain *domain,
@@ -3361,7 +3371,9 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
 	int ret;
 
 	if (!domain->ops->set_dev_pasid ||
-	    !ops->remove_dev_pasid)
+	    (!ops->remove_dev_pasid &&
+	     (!ops->blocked_domain ||
+	      !ops->blocked_domain->ops->set_dev_pasid)))
 		return -EOPNOTSUPP;
 
 	if (!group)
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 3/7
#7 lore raw

Re: [PATCH v4 3/7] iommu: Detaching pasid by attaching to the blocked_domain

Quoted 10 lines · Yi Liu

The iommu drivers are on the way to detach pasid by attaching to the blocked domain. However, this cannot be done in one shot. During the transition, iommu core would select between the remove_dev_pasid op and the blocked domain.

Quoted 3 lines
---
  drivers/iommu/iommu.c | 16 ++++++++++++++--
  1 file changed, 14 insertions(+), 2 deletions(-)

with a minor comment below

Quoted 6 lines
drivers/iommu/iommu.c +0 -0
index 819c6e0188d5..6fd4b904f270 100644

drivers/iommu/iommu.c static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid, · line 3310

Quoted 10 lines
drivers/iommu/iommu.c +5 -1
@@ -3302,8 +3302,18 @@ static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
  				   struct iommu_domain *domain)
  {
  	const struct iommu_ops *ops = dev_iommu_ops(dev);
+	struct iommu_domain *blocked_domain = ops->blocked_domain;
+	int ret = 1;
 
-	ops->remove_dev_pasid(dev, pasid, domain);
+	if (blocked_domain && blocked_domain->ops->set_dev_pasid) {
+		ret = blocked_domain->ops->set_dev_pasid(blocked_domain,
+							 dev, pasid, domain);

How about removing "ret" and just add a WARN_ON around the return of setting blocking domain?

	/* Driver should never fail to set a blocking domain. */
	WARN_ON(blocked_domain->ops->set_dev_pasid(...));

drivers/iommu/iommu.c static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid, · line 3317

Quoted 7 lines
drivers/iommu/iommu.c +6 -0
+	} else {
+		ops->remove_dev_pasid(dev, pasid, domain);
+		ret = 0;
+	}
+
+	WARN_ON(ret);
  }

--
baolu

maintainer
#8 lore raw

Re: [PATCH v4 3/7] iommu: Detaching pasid by attaching to the blocked_domain

Quoted 39 lines · Baolu Lu
Quoted 10 lines · Yi Liu

The iommu drivers are on the way to detach pasid by attaching to the blocked domain. However, this cannot be done in one shot. During the transition, iommu core would select between the remove_dev_pasid op and the blocked domain.

Quoted 3 lines

---
  drivers/iommu/iommu.c | 16 ++++++++++++++--

  1 file changed, 14 insertions(+), 2 deletions(-)

with a minor comment below

Quoted 6 lines
drivers/iommu/iommu.c +0 -0
index 819c6e0188d5..6fd4b904f270 100644

drivers/iommu/iommu.c static void iommu_remove_dev_pasid(struct · line 3310

Quoted 10 lines
drivers/iommu/iommu.c +5 -1
@@ -3302,8 +3302,18 @@ static void iommu_remove_dev_pasid(struct 
 device *dev, ioasid_t pasid,
                      struct iommu_domain *domain)
   {
       const struct iommu_ops *ops = dev_iommu_ops(dev);
+    struct iommu_domain *blocked_domain = ops->blocked_domain;
+    int ret = 1;
-    ops->remove_dev_pasid(dev, pasid, domain);
+    if (blocked_domain && blocked_domain->ops->set_dev_pasid) {
+        ret = blocked_domain->ops->set_dev_pasid(blocked_domain,
+                             dev, pasid, domain);

How about removing "ret" and just add a WARN_ON around the return of setting blocking domain?

Quoted 2 lines

    /* Driver should never fail to set a blocking domain. */ WARN_ON(blocked_domain->ops->set_dev_pasid(...));

I saw this in patch 7/7. So never mind about this.

--
baolu

author
#9 lore raw

PATCH v4 4/7 iommu/arm-smmu-v3: Make the blocked domain support PASID

In reply to Yi Liu

From: Jason Gunthorpe <[email protected]>

The blocked domain is used to park RID to be blocking DMA state. This can be extended to PASID as well. By this, the remove_dev_pasid() op of ARM SMMUv3 can be dropped.

---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +6 -6
index 7ee3cbbe3744..276738d047e7 100644
@@ -2979,13 +2979,12 @@ int arm_smmu_set_pasid(struct arm_smmu_master *master,
 	return ret;
 }
 
-static void arm_smmu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
-				      struct iommu_domain *domain)
+static int arm_smmu_blocking_set_dev_pasid(struct iommu_domain *new_domain,
+					   struct device *dev, ioasid_t pasid,
+					   struct iommu_domain *old_domain)
 {
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(old_domain);
 	struct arm_smmu_master *master = dev_iommu_priv_get(dev);
-	struct arm_smmu_domain *smmu_domain;
-
-	smmu_domain = to_smmu_domain(domain);
 
 	mutex_lock(&arm_smmu_asid_lock);
 	arm_smmu_clear_cd(master, pasid);
@@ -3006,6 +3005,7 @@ static void arm_smmu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
 		    sid_domain->type == IOMMU_DOMAIN_BLOCKED)
 			sid_domain->ops->attach_dev(sid_domain, dev);
 	}
+	return 0;
 }
 
 static void arm_smmu_attach_dev_ste(struct iommu_domain *domain,
@@ -3087,6 +3087,7 @@ static int arm_smmu_attach_dev_blocked(struct iommu_domain *domain,
 
 static const struct iommu_domain_ops arm_smmu_blocked_ops = {
 	.attach_dev = arm_smmu_attach_dev_blocked,
+	.set_dev_pasid = arm_smmu_blocking_set_dev_pasid,
 };
 
 static struct iommu_domain arm_smmu_blocked_domain = {
@@ -3514,7 +3515,6 @@ static struct iommu_ops arm_smmu_ops = {
 	.device_group		= arm_smmu_device_group,
 	.of_xlate		= arm_smmu_of_xlate,
 	.get_resv_regions	= arm_smmu_get_resv_regions,
-	.remove_dev_pasid	= arm_smmu_remove_dev_pasid,
 	.dev_enable_feat	= arm_smmu_dev_enable_feature,
 	.dev_disable_feat	= arm_smmu_dev_disable_feature,
 	.page_response		= arm_smmu_page_response,
Signature · 1 line
2.34.1
author
#10 lore raw

PATCH v4 5/7 iommu/vt-d: Make the blocked domain support PASID

In reply to Yi Liu

The blocked domain can be extended to park PASID of a device to be the DMA blocking state. By this the remove_dev_pasid() op is dropped.

---
 drivers/iommu/intel/iommu.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/iommu/intel/iommu.c +11 -4
index 527f6f89d8a1..b08981bbd5ca 100644
@@ -3248,10 +3248,15 @@ static int blocking_domain_attach_dev(struct iommu_domain *domain,
 	return 0;
 }
 
+static int blocking_domain_set_dev_pasid(struct iommu_domain *domain,
+					 struct device *dev, ioasid_t pasid,
+					 struct iommu_domain *old);
+
 static struct iommu_domain blocking_domain = {
 	.type = IOMMU_DOMAIN_BLOCKED,
 	.ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= blocking_domain_attach_dev,
+		.set_dev_pasid	= blocking_domain_set_dev_pasid,
 	}
 };
 
@@ -4105,13 +4110,16 @@ void domain_remove_dev_pasid(struct iommu_domain *domain,
 	kfree(dev_pasid);
 }
 
-static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
-					 struct iommu_domain *domain)
+static int blocking_domain_set_dev_pasid(struct iommu_domain *domain,
+					 struct device *dev, ioasid_t pasid,
+					 struct iommu_domain *old)
 {
 	struct device_domain_info *info = dev_iommu_priv_get(dev);
 
 	intel_pasid_tear_down_entry(info->iommu, dev, pasid, false);
-	domain_remove_dev_pasid(domain, dev, pasid);
+	domain_remove_dev_pasid(old, dev, pasid);
+
+	return 0;
 }
 
 struct dev_pasid_info *
@@ -4483,7 +4491,6 @@ const struct iommu_ops intel_iommu_ops = {
 	.dev_disable_feat	= intel_iommu_dev_disable_feat,
 	.is_attach_deferred	= intel_iommu_is_attach_deferred,
 	.def_domain_type	= device_def_domain_type,
-	.remove_dev_pasid	= intel_iommu_remove_dev_pasid,
 	.pgsize_bitmap		= SZ_4K,
 	.page_response		= intel_iommu_page_response,
 	.default_domain_ops = &(const struct iommu_domain_ops) {
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 5/7
#11 lore raw

Re: [PATCH v4 5/7] iommu/vt-d: Make the blocked domain support PASID

Quoted 9 lines · Yi Liu

The blocked domain can be extended to park PASID of a device to be the DMA blocking state. By this the remove_dev_pasid() op is dropped.

---
  drivers/iommu/intel/iommu.c | 15 +++++++++++----
  1 file changed, 11 insertions(+), 4 deletions(-)
author
#12 lore raw

PATCH v4 6/7 iommu/amd: Make the blocked domain support PASID

In reply to Yi Liu

The blocked domain can be extended to park PASID of a device to be the DMA blocking state. By this the remove_dev_pasid() op is dropped.

Remove PASID from old domain and device GCR3 table. No need to attach PASID to the blocked domain as clearing PASID from GCR3 table will make sure all DMAs for that PASID are blocked.

---
 drivers/iommu/amd/iommu.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/iommu/amd/iommu.c +9 -1
index 5ce8e6504ba7..d216313b6d44 100644
@@ -2468,10 +2468,19 @@ static int blocked_domain_attach_device(struct iommu_domain *domain,
 	return 0;
 }
 
+static int blocked_domain_set_dev_pasid(struct iommu_domain *domain,
+					struct device *dev, ioasid_t pasid,
+					struct iommu_domain *old)
+{
+	amd_iommu_remove_dev_pasid(dev, pasid, old);
+	return 0;
+}
+
 static struct iommu_domain blocked_domain = {
 	.type = IOMMU_DOMAIN_BLOCKED,
 	.ops = &(const struct iommu_domain_ops) {
 		.attach_dev     = blocked_domain_attach_device,
+		.set_dev_pasid  = blocked_domain_set_dev_pasid,
 	}
 };
 
@@ -2894,7 +2903,6 @@ const struct iommu_ops amd_iommu_ops = {
 	.def_domain_type = amd_iommu_def_domain_type,
 	.dev_enable_feat = amd_iommu_dev_enable_feature,
 	.dev_disable_feat = amd_iommu_dev_disable_feature,
-	.remove_dev_pasid = amd_iommu_remove_dev_pasid,
 	.page_response = amd_iommu_page_response,
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= amd_iommu_attach_device,
Signature · 1 line
2.34.1
author
#13 lore raw

PATCH v4 7/7 iommu: Remove the remove_dev_pasid op

In reply to Yi Liu

The iommu drivers that supports PASID have supported attaching pasid to the blocked_domain, hence remove the remove_dev_pasid op from the iommu_ops.

---
 drivers/iommu/iommu.c | 17 ++++-------------
 include/linux/iommu.h |  5 -----
 2 files changed, 4 insertions(+), 18 deletions(-)
drivers/iommu/iommu.c +4 -13
index 6fd4b904f270..e970893168d8 100644
@@ -3303,17 +3303,9 @@ static void iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
 {
 	const struct iommu_ops *ops = dev_iommu_ops(dev);
 	struct iommu_domain *blocked_domain = ops->blocked_domain;
-	int ret = 1;
 
-	if (blocked_domain && blocked_domain->ops->set_dev_pasid) {
-		ret = blocked_domain->ops->set_dev_pasid(blocked_domain,
-							 dev, pasid, domain);
-	} else {
-		ops->remove_dev_pasid(dev, pasid, domain);
-		ret = 0;
-	}
-
-	WARN_ON(ret);
+	WARN_ON(blocked_domain->ops->set_dev_pasid(blocked_domain,
+						   dev, pasid, domain));
 }
 
 static int __iommu_set_group_pasid(struct iommu_domain *domain,
@@ -3371,9 +3363,8 @@ int iommu_attach_device_pasid(struct iommu_domain *domain,
 	int ret;
 
 	if (!domain->ops->set_dev_pasid ||
-	    (!ops->remove_dev_pasid &&
-	     (!ops->blocked_domain ||
-	      !ops->blocked_domain->ops->set_dev_pasid)))
+	    !ops->blocked_domain ||
+	    !ops->blocked_domain->ops->set_dev_pasid)
 		return -EOPNOTSUPP;
 
 	if (!group)
include/linux/iommu.h +0 -5
index 0c3bfb66dc7c..1d033121bf00 100644
@@ -537,9 +537,6 @@ static inline int __iommu_copy_struct_from_user_array(
  *		- IOMMU_DOMAIN_DMA: must use a dma domain
  *		- 0: use the default setting
  * @default_domain_ops: the default ops for domains
- * @remove_dev_pasid: Remove any translation configurations of a specific
- *                    pasid, so that any DMA transactions with this pasid
- *                    will be blocked by the hardware.
  * @pgsize_bitmap: bitmap of all possible supported page sizes
  * @owner: Driver module providing these ops
  * @identity_domain: An always available, always attachable identity
@@ -586,8 +583,6 @@ struct iommu_ops {
 			      struct iommu_page_response *msg);
 
 	int (*def_domain_type)(struct device *dev);
-	void (*remove_dev_pasid)(struct device *dev, ioasid_t pasid,
-				 struct iommu_domain *domain);
 
 	const struct iommu_domain_ops *default_domain_ops;
 	unsigned long pgsize_bitmap;
Signature · 1 line
2.34.1
maintainer Reviewed-by on v4 7/7
#14 lore raw

Re: [PATCH v4 7/7] iommu: Remove the remove_dev_pasid op

Quoted 11 lines · Yi Liu

The iommu drivers that supports PASID have supported attaching pasid to the blocked_domain, hence remove the remove_dev_pasid op from the iommu_ops.

---
  drivers/iommu/iommu.c | 17 ++++-------------
  include/linux/iommu.h |  5 -----
  2 files changed, 4 insertions(+), 18 deletions(-)