Skip to contentSkip to conversation

qemu: bios: Make boot prompt optional

PATCH RESEND In review Jan Kiszka 2 participants 2 messages Jun 27, 2009 – Jun 28, 2009

lore
Share & tools
lore

Jan Kiszka

author
#0 lore raw

PATCH RESEND 2/2 qemu: bios: Make boot prompt optional

[ Note: Applies on top of qemu's current patch series. ]

Check via QEMU's firmware configuration interface if the boot prompt should be given. This allows to disable the prompt with its several seconds long delay, speeding up the common boot case.

---

 bios/rombios.c   |   19 +++++++++++++++++++
 bios/rombios.h   |   11 +++++++++++
 bios/rombios32.c |   10 ----------
 3 files changed, 30 insertions(+), 10 deletions(-)
bios/rombios.c +19 -0
index 0f13b53..3b7a5f0 100644
@@ -2015,6 +2015,21 @@ Bit16u i; ipl_entry_t *e;
 }
 
 #if BX_ELTORITO_BOOT
+#ifdef BX_QEMU
+int
+qemu_cfg_probe_bootkey()
+{
+  outw(QEMU_CFG_CTL_PORT, QEMU_CFG_SIGNATURE);
+  if (inb(QEMU_CFG_DATA_PORT) != 'Q' ||
+      inb(QEMU_CFG_DATA_PORT) != 'E' ||
+      inb(QEMU_CFG_DATA_PORT) != 'M' ||
+      inb(QEMU_CFG_DATA_PORT) != 'U') return 1;
+
+  outw(QEMU_CFG_CTL_PORT, QEMU_CFG_BOOT_INTERACTIVE);
+  return inb(QEMU_CFG_DATA_PORT);
+}
+#endif // BX_QEMU
+
   void
 interactive_bootkey()
 {
@@ -2026,6 +2041,10 @@ interactive_bootkey()
   Bit16u ss = get_SS();
   Bit16u valid_choice = 0;
 
+#ifdef BX_QEMU
+  if (!qemu_cfg_probe_bootkey()) return;
+#endif
+
   while (check_for_keystroke())
     get_keystroke();
 
bios/rombios.h +11 -0
index 6f9cbb1..038b4a0 100644
@@ -58,6 +58,17 @@
 #define SMB_IO_BASE       0xb100
 #define SMP_MSR_ADDR      0x0510
 
+#define QEMU_CFG_CTL_PORT         0x510
+#define QEMU_CFG_DATA_PORT        0x511
+#define QEMU_CFG_SIGNATURE        0x00
+#define QEMU_CFG_ID               0x01
+#define QEMU_CFG_UUID             0x02
+#define QEMU_CFG_NUMA             0x0d
+#define QEMU_CFG_BOOT_INTERACTIVE 0x0e
+#define QEMU_CFG_ARCH_LOCAL       0x8000
+#define QEMU_CFG_ACPI_TABLES      (QEMU_CFG_ARCH_LOCAL + 0)
+#define QEMU_CFG_SMBIOS_ENTRIES   (QEMU_CFG_ARCH_LOCAL + 1)
+
   // Define the application NAME
 #if defined(BX_QEMU)
 #  define BX_APPNAME "QEMU"
bios/rombios32.c +0 -10
index f861f81..3fe4e48 100644
@@ -468,16 +468,6 @@ void wrmsr_smp(uint32_t index, uint64_t val)
 }
 
 #ifdef BX_QEMU
-#define QEMU_CFG_CTL_PORT 0x510
-#define QEMU_CFG_DATA_PORT 0x511
-#define QEMU_CFG_SIGNATURE  0x00
-#define QEMU_CFG_ID         0x01
-#define QEMU_CFG_UUID       0x02
-#define QEMU_CFG_NUMA       0x0D
-#define QEMU_CFG_ARCH_LOCAL     0x8000
-#define QEMU_CFG_ACPI_TABLES  (QEMU_CFG_ARCH_LOCAL + 0)
-#define QEMU_CFG_SMBIOS_ENTRIES  (QEMU_CFG_ARCH_LOCAL + 1)
-
 int qemu_cfg_port;
 
 void qemu_cfg_select(int f)
#1 lore raw

[Qemu-devel] Re: [Bochs-developers] [RESEND][PATCH 2/2] qemu: bios: Make boot promptoptional

Quoted 7 lines · Jan Kiszka

[ Note: Applies on top of qemu's current patch series. ]

Check via QEMU's firmware configuration interface if the boot prompt should be given. This allows to disable the prompt with its several seconds long delay, speeding up the common boot case.

What about splitting this patch into two?
One moving QEMU_CFG_* to rombios.h and one adding the new functionality.

- Sebastian