Bluetooth: qca: add regulators for QCA6390
PATCH 1/2 Bluetooth: qca: add regulators for QCA6390
From: Bartosz Golaszewski <[email protected]>
Add regulators for the QCA6390 module present on the Qualcomm RB5 board.
--- drivers/bluetooth/hci_qca.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_qca.c +9 -1
@@ -2044,7 +2044,15 @@ static const struct qca_device_data qca_soc_data_qca2066 __maybe_unused = {static const struct qca_device_data qca_soc_data_qca6390__maybe_unused = { .soc_type =QCA_QCA6390 , - .num_vregs =0 , + .vregs = (struct qca_vreg []) { + {"vddio" ,20000 }, + {"vddaon" ,100000 }, + {"vddpmu" ,1250000 }, + {"vddrfa1" ,200000 }, + {"vddrfa2" ,400000 }, + {"vddrfa3" ,400000 }, + }, + .num_vregs =6 , };static const struct qca_device_data qca_soc_data_wcn6750__maybe_unused = {
Signature · 1 line
2.40.1
PATCH 2/2 Bluetooth: qca: run the power-on/off sequence for QCA6390 too
From: Bartosz Golaszewski <[email protected]>
The Bluetooth module on QCA6390 needs to be powered-on by enabling the relevant regulators and driving the enable GPIO high. We can reuse the power sequence for the WNC models.
--- drivers/bluetooth/hci_qca.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/bluetooth/hci_qca.c +4 -0
@@ -1788,6 +1788,7 @@ static int qca_power_on(struct hci_dev *hdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 : ret =qca_regulator_init (hu);break ;
@@ -2137,6 +2138,7 @@ static void qca_power_shutdown(struct hci_uart *hu)case QCA_WCN6750 :case QCA_WCN6855 : +case QCA_QCA6390 :gpiod_set_value_cansleep (qcadev->bt_en,0 );msleep (100 );qca_regulator_disable (qcadev);
@@ -2284,6 +2286,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 : qcadev->bt_power =devm_kzalloc (&serdev->dev,sizeof (struct qca_power ),GFP_KERNEL );
@@ -2394,6 +2397,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 :if (power->vregs_on) {qca_power_shutdown (&qcadev->serdev_hu);break ;
Signature · 1 line
2.40.1
Re: [PATCH 2/2] Bluetooth: qca: run the power-on/off sequence for QCA6390 too
Quoted 40 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
The Bluetooth module on QCA6390 needs to be powered-on by enabling the relevant regulators and driving the enable GPIO high. We can reuse the power sequence for the WNC models.
Signed-off-by Bartosz Golaszewski <[email protected]>--- drivers/bluetooth/hci_qca.c | 4 ++++ 1 file changed, 4 insertions(+)drivers/bluetooth/hci_qca.c +3
-0@@ -1788,6 +1788,7 @@ static int qca_power_on(struct hci_dev *hdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 : ret =qca_regulator_init (hu);break ;@@ -2137,6 +2138,7 @@ static void qca_power_shutdown(struct hci_uart *hu)case QCA_WCN6750 :case QCA_WCN6855 : +case QCA_QCA6390 :gpiod_set_value_cansleep (qcadev->bt_en,0 );msleep (100 );qca_regulator_disable (qcadev);@@ -2284,6 +2286,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 : qcadev->bt_power =devm_kzalloc (&serdev->dev,sizeof (struct qca_power ),GFP_KERNEL );
drivers/bluetooth/hci_qca.c static void qca_serdev_remove(struct serdev_device *serdev) · line 2403
Quoted 7 lines
drivers/bluetooth/hci_qca.c +1
-0@@ -2394,6 +2397,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)case QCA_WCN6750 :case QCA_WCN6855 :case QCA_WCN7850 : +case QCA_QCA6390 :if (power->vregs_on) {qca_power_shutdown (&qcadev->serdev_hu);break ;
These two patches should also be squashed into one. Makes no sense to separate them.
Johan
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=806985
---Test result---
Test Summary:
CheckPatch PASS 0.96 seconds GitLint PASS 0.46 seconds SubjectPrefix PASS 0.17 seconds BuildKernel PASS 27.72 seconds CheckAllWarning PASS 30.13 seconds CheckSparse PASS 35.27 seconds CheckSmatch PASS 100.73 seconds BuildKernel32 PASS 26.72 seconds TestRunnerSetup PASS 418.81 seconds TestRunner_l2cap-tester PASS 22.99 seconds TestRunner_iso-tester PASS 46.47 seconds TestRunner_bnep-tester PASS 6.96 seconds TestRunner_mgmt-tester PASS 162.23 seconds TestRunner_rfcomm-tester PASS 10.84 seconds TestRunner_sco-tester PASS 14.47 seconds TestRunner_ioctl-tester PASS 12.11 seconds TestRunner_mesh-tester PASS 8.85 seconds TestRunner_smp-tester PASS 9.76 seconds TestRunner_userchan-tester PASS 7.34 seconds IncrementalBuild PASS 30.36 seconds
---
Regards,
Linux Bluetooth