Skip to contentSkip to conversation

Bluetooth: Fix atomicity violation in {conn,adv}_{min,max}_interval_set

PATCH In review Gui-Dong Han 2 participants 2 messages Dec 22, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Bluetooth: Fix atomicity violation in {conn,adv}_{min,max}_interval_set

In {conn,adv}_min_interval_set():

    if (val < ... || val > ... || val > hdev->le_{conn,adv}_max_interval)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_{conn,adv}_min_interval = val;
    hci_dev_unlock(hdev);

In {conn,adv}_max_interval_set():

    if (val < ... || val > ... || val < hdev->le_{conn,adv}_min_interval)
        return -EINVAL;
    hci_dev_lock(hdev);
    hdev->le_{conn,adv}_max_interval
    hci_dev_unlock(hdev);

The atomicity violation occurs due to concurrent execution of set_min and set_max funcs. Consider a scenario where setmin writes a new, valid 'min' value, and concurrently, setmax writes a value that is greater than the old 'min' but smaller than the new 'min'. In this case, setmax might check against the old 'min' value (before acquiring the lock) but write its value after the 'min' has been updated by setmin. This leads to a situation where the 'max' value ends up being smaller than the 'min' value, which is an inconsistency.

This possible bug is found by an experimental static analysis tool developed by our team, BassCheck[1]. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 5.17.

To resolve this issue, it is suggested to encompass the validity checks within the locked sections in both set_min and set_max funcs. The modification ensures that the validation of 'val' against the current min/max values is atomic, thus maintaining the integrity of the settings. With this patch applied, our tool no longer reports the bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic.

[1] https://sites.google.com/view/basscheck/

Fixes 3a5c82b78fd2 ("Bluetooth: Move LE debugfs file creation into ...")

---
v2:
* Adjust the format to pass the CI.

---
 net/bluetooth/hci_debugfs.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)
net/bluetooth/hci_debugfs.c +19 -11
index 6b7741f6e95b..6fdda807f2cf 100644
@@ -849,11 +849,13 @@ DEFINE_SHOW_ATTRIBUTE(long_term_keys);
 static int conn_min_interval_set(void *data, u64 val)
 {
 	struct hci_dev *hdev = data;
-
-	if (val < 0x0006 || val > 0x0c80 || val > hdev->le_conn_max_interval)
+
+	hci_dev_lock(hdev);
+	if (val < 0x0006 || val > 0x0c80 || val > hdev->le_conn_max_interval) {
+		hci_dev_unlock(hdev);
 		return -EINVAL;
+	}
 
-	hci_dev_lock(hdev);
 	hdev->le_conn_min_interval = val;
 	hci_dev_unlock(hdev);
 
@@ -877,11 +879,13 @@ DEFINE_DEBUGFS_ATTRIBUTE(conn_min_interval_fops, conn_min_interval_get,
 static int conn_max_interval_set(void *data, u64 val)
 {
 	struct hci_dev *hdev = data;
-
-	if (val < 0x0006 || val > 0x0c80 || val < hdev->le_conn_min_interval)
+
+	hci_dev_lock(hdev);
+	if (val < 0x0006 || val > 0x0c80 || val < hdev->le_conn_min_interval) {
+		hci_dev_unlock(hdev);
 		return -EINVAL;
+	}
 
-	hci_dev_lock(hdev);
 	hdev->le_conn_max_interval = val;
 	hci_dev_unlock(hdev);
 
@@ -989,11 +993,13 @@ DEFINE_DEBUGFS_ATTRIBUTE(adv_channel_map_fops, adv_channel_map_get,
 static int adv_min_interval_set(void *data, u64 val)
 {
 	struct hci_dev *hdev = data;
-
-	if (val < 0x0020 || val > 0x4000 || val > hdev->le_adv_max_interval)
+
+	hci_dev_lock(hdev);
+	if (val < 0x0020 || val > 0x4000 || val > hdev->le_adv_max_interval) {
+		hci_dev_unlock(hdev);
 		return -EINVAL;
+	}
 
-	hci_dev_lock(hdev);
 	hdev->le_adv_min_interval = val;
 	hci_dev_unlock(hdev);
 
@@ -1018,10 +1024,12 @@ static int adv_max_interval_set(void *data, u64 val)
 {
 	struct hci_dev *hdev = data;
 
-	if (val < 0x0020 || val > 0x4000 || val < hdev->le_adv_min_interval)
+	hci_dev_lock(hdev);
+	if (val < 0x0020 || val > 0x4000 || val < hdev->le_adv_min_interval) {
+		hci_dev_unlock(hdev);
 		return -EINVAL;
+	}
 
-	hci_dev_lock(hdev);
 	hdev->le_adv_max_interval = val;
 	hci_dev_unlock(hdev);
 
Signature · 1 line
2.34.1
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=812523

---Test result---

Test Summary:

CheckPatch                    PASS      0.63 seconds
GitLint                       PASS      0.30 seconds
SubjectPrefix                 PASS      0.12 seconds
BuildKernel                   PASS      28.04 seconds
CheckAllWarning               PASS      31.02 seconds
CheckSparse                   PASS      36.78 seconds
CheckSmatch                   PASS      100.59 seconds
BuildKernel32                 PASS      27.03 seconds
TestRunnerSetup               PASS      434.26 seconds
TestRunner_l2cap-tester       PASS      23.61 seconds
TestRunner_iso-tester         PASS      47.73 seconds
TestRunner_bnep-tester        PASS      7.10 seconds
TestRunner_mgmt-tester        PASS      162.48 seconds
TestRunner_rfcomm-tester      PASS      11.08 seconds
TestRunner_sco-tester         PASS      14.66 seconds
TestRunner_ioctl-tester       PASS      14.26 seconds
TestRunner_mesh-tester        PASS      8.97 seconds
TestRunner_smp-tester         PASS      9.84 seconds
TestRunner_userchan-tester    PASS      7.31 seconds
IncrementalBuild              PASS      25.84 seconds

---
Regards,
Linux Bluetooth