ubi: Expose mean erase counter in sysfs
Subsystems (2)
PATCH v3 1/10 ubi: Expose mean erase counter in sysfs
Currently, only "max_ec" can be read from sysfs, which provides a limited view of the flash device’s wear. In certain cases, such as bugs in the wear-leveling algorithm, specific blocks can be worn down more than others, resulting in uneven wear distribution. Providing a mean erase counter value gives a better understanding of the overall flash wear.
There exists more detailed info in debugfs, but this information is only available for debug builds.
This patch calculates the mean value only when it is requested. This calculation typically takes 2.7 ms for an UBI device with 4091 blocks running on a single core Cortex-A9 at 792 MHz.
--- drivers/mtd/ubi/build.c | 46 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)
drivers/mtd/ubi/build.c +46 -0
@@ -131,6 +131,8 @@ static struct device_attribute dev_volumes_count =__ATTR (volumes_count,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_max_ec =__ATTR (max_ec,S_IRUGO , dev_attribute_show,NULL ); +static struct device_attribute dev_mean_ec = +__ATTR (mean_ec,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_reserved_for_bad =__ATTR (reserved_for_bad,S_IRUGO , dev_attribute_show,NULL ); static struct device_attribute dev_bad_peb_count =
@@ -337,6 +339,47 @@ int ubi_major2num(int major)return ubi_num; } +/** +* ubi_calc_mean_ec - calculate mean erase counter value. +* @ubi: UBI device description object +* @start_peb: First PEB in the range +* @end_peb: End PEB in the half-open range +* +* Returns the mean value of all non-bad blocks of the device that are +* in the range. Range is half-open i.e end_peb is not actually included. +*/ +static int ubi_calc_mean_ec (struct ubi_device *ubi,int start_peb,int end_peb) +{ +struct ubi_wl_entry *wl; +int peb; +int ec_count =0 ; +int mean_ec =0 ; +uint64_t ec_sum =0 ; + +for (peb = start_peb; peb < end_peb; peb++) { +int err; + + err =ubi_io_is_bad (ubi, peb); +if (err) +continue ; + +spin_lock (&ubi->wl_lock); + + wl = ubi->lookuptbl[peb]; +if (wl) { + ec_sum += wl->ec; + ec_count++; + } + +spin_unlock (&ubi->wl_lock); + } + +if (ec_count >0 ) + mean_ec =div_u64 (ec_sum, ec_count); + +return mean_ec; +} +/* "Show" method for files in '/<sysfs>/class/ubi/ubiX/' */ static ssize_t dev_attribute_show (struct device *dev,struct device_attribute *attr,char *buf)
@@ -366,6 +409,8 @@ static ssize_t dev_attribute_show(struct device *dev, ret =sprintf (buf,"%d\n" , ubi->vol_count -UBI_INT_VOL_COUNT ); else if (attr == &dev_max_ec) ret =sprintf (buf,"%d\n" , ubi->max_ec); + else if (attr == &dev_mean_ec) + ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 , ubi->peb_count)); else if (attr == &dev_reserved_for_bad) ret =sprintf (buf,"%d\n" , ubi->beb_rsvd_pebs); else if (attr == &dev_bad_peb_count)
@@ -392,6 +437,7 @@ static struct attribute *ubi_dev_attrs[] = { &dev_total_eraseblocks.attr, &dev_volumes_count.attr, &dev_max_ec.attr, + &dev_mean_ec.attr, &dev_reserved_for_bad.attr, &dev_bad_peb_count.attr, &dev_max_vol_count.attr,
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 2/10 ubi: Expose mean erase counter for fastmap in sysfs
Since the fastmap area has its own wear levelling it is valuable to provide a mean value for that area. This value can be used in order to estimate life expectancy of the flash.
--- drivers/mtd/ubi/build.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
drivers/mtd/ubi/build.c +11 -0
@@ -133,6 +133,10 @@ static struct device_attribute dev_max_ec =__ATTR (max_ec,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_mean_ec =__ATTR (mean_ec,S_IRUGO , dev_attribute_show,NULL ); +#ifdef CONFIG_MTD_UBI_FASTMAP +static struct device_attribute dev_mean_ec_fastmap = +__ATTR (mean_ec_fastmap,S_IRUGO , dev_attribute_show,NULL ); +#endif static struct device_attribute dev_reserved_for_bad =__ATTR (reserved_for_bad,S_IRUGO , dev_attribute_show,NULL ); static struct device_attribute dev_bad_peb_count =
@@ -411,6 +415,10 @@ static ssize_t dev_attribute_show(struct device *dev, ret =sprintf (buf,"%d\n" , ubi->max_ec); else if (attr == &dev_mean_ec) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 , ubi->peb_count)); +#ifdef CONFIG_MTD_UBI_FASTMAP + else if (attr == &dev_mean_ec_fastmap) + ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 ,UBI_FM_MAX_START )); +#endif else if (attr == &dev_reserved_for_bad) ret =sprintf (buf,"%d\n" , ubi->beb_rsvd_pebs); else if (attr == &dev_bad_peb_count)
@@ -438,6 +446,9 @@ static struct attribute *ubi_dev_attrs[] = { &dev_volumes_count.attr, &dev_max_ec.attr, &dev_mean_ec.attr, +#ifdef CONFIG_MTD_UBI_FASTMAP + &dev_mean_ec_fastmap.attr, +#endif &dev_reserved_for_bad.attr, &dev_bad_peb_count.attr, &dev_max_vol_count.attr,
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Richard Weinberger
maintainerRe: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfs
Rickard,
----- Ursprüngliche Mail -----
Quoted 25 lines
Von: "Rickard X Andersson" <[email protected]>
An: "richard" <[email protected]>, "chengzhihao1" <[email protected]>, "linux-mtd" <[email protected]>, "rickard314 andersson" <[email protected]>
CC: "Rickard X Andersson" <[email protected]>, "kernel" <[email protected]>
Gesendet: Freitag, 11. Oktober 2024 14:58:56
Betreff: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfsSince the fastmap area has its own wear levelling it is valuable to provide a mean value for that area. This value can be used in order to estimate life expectancy of the flash.
Reviewed-by Zhihao Cheng <[email protected]>Signed-off-by Rickard Andersson <[email protected]>---
drivers/mtd/ubi/build.c| 11 +++++++++++1 file changed, 11 insertions(+)drivers/mtd/ubi/build.c +0
-0@@ -133,6 +133,10 @@ static struct device_attribute dev_max_ec =__ATTR (max_ec,S_IRUGO , dev_attribute_show,NULL );static struct
device_attributedev_mean_ec=__ATTR(mean_ec, S_IRUGO, dev_attribute_show, NULL);
drivers/mtd/ubi/build.c static struct device_attribute dev_max_ec = · line 139
Quoted 4 lines
drivers/mtd/ubi/build.c +4
-0+#ifdef CONFIG_MTD_UBI_FASTMAP +static struct device_attribute dev_mean_ec_fastmap = +__ATTR (mean_ec_fastmap,S_IRUGO , dev_attribute_show,NULL ); +#endif
Do you really need distinct sysfs attributes for the fastmap and the non-fastmap case? Userspace does not care whether fastmap is used or not, all userspace is interested in is the mean erase counter value.
IMHO, the mean_ec attribute should combine the mean EC values from the fastmap and the data area.
Thanks,
//richard
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfs
Quoted 10 lines · Richard Weinberger
Do you really need distinct sysfs attributes for the fastmap and the non-fastmap case? Userspace does not care whether fastmap is used or not, all userspace is interested in is the mean erase counter value.
IMHO, the
mean_ecattribute should combine the mean EC values from the fastmap and the data area.Thanks,
//richard
Hi and thanks for answering!
One of my devices have the following status:
/sys/class/ubi/ubi1 # cat max_ec_data
4672/sys/class/ubi/ubi1 # cat mean_ec_fastmap
8869
If you combine the mean EC values you will not be able to tell that the fastmap area is much more worn down. For example the wear of your fastmap area could be on the verge of breaking the flash but that will not be seen on a mean value that includes both the fastmap and data area.
If fastmap is not enabled on your system then mean_ec_fastmap will not be visible in sysfs.
Thanks,
Rickard A.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Richard Weinberger
maintainerRe: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfs
----- Ursprüngliche Mail -----
Quoted 9 lines
Von: "Rickard x Andersson" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]> One of my devices have the following status:
/sys/class/ubi/ubi1# catmax_ec_data
4672/sys/class/ubi/ubi1# catmean_ec_fastmap
8869
Quoted 7 lines
If you combine the mean EC values you will not be able to tell that the fastmap area is much more worn down. For example the wear of your fastmap area could be on the verge of breaking the flash but that will not be seen on a mean value that includes both the fastmap and data area.
If fastmap is not enabled on your system then
mean_ec_fastmapwill not be visible in sysfs.
But does the user application care?
Let me ask differently, what is the purpose of exposing these numbers? If you just want to know how much your flash is aged, combined max/mean ec counters will do it.
For debugging fastmap specific issues, the detailed info via debugfs will do it.
I'm totally fine with exposing more counters, we just need to be clear about their meaning and use case. Especially in sysfs we must not make a mess.
Thanks,
//richard
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Re: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfs
Quoted 23 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 9 lines
Von: "Rickard x Andersson" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]> One of my devices have the following status:
/sys/class/ubi/ubi1# catmax_ec_data
4672/sys/class/ubi/ubi1# catmean_ec_fastmap
8869Quoted 7 lines
If you combine the mean EC values you will not be able to tell that the fastmap area is much more worn down. For example the wear of your fastmap area could be on the verge of breaking the flash but that will not be seen on a mean value that includes both the fastmap and data area.
If fastmap is not enabled on your system then
mean_ec_fastmapwill not be visible in sysfs.But does the user application care?
Let me ask differently, what is the purpose of exposing these numbers? If you just want to know how much your flash is aged, combined max/mean ec counters will do it.
Quoted 7 lines
For debugging fastmap specific issues, the detailed info via debugfs will do it.
I'm totally fine with exposing more counters, we just need to be clear about their meaning and use case. Especially in sysfs we must not make a mess.
Thanks,
//richard
It is for diagnostics. For example, if you have 100 devices running you might want to know if some of them are about to be worn down. If you know that you can take action before they actually break down. One action could be to for example replace the device in that case. Since the devices are operate in the "field" it is recommended avoid using debugfs due to security concerns.
A device might break down due to heavy wear of just the fastmap area.
Thanks,
Rickard A.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 3/10 ubi: Expose max erase counter for fastmap in sysfs
In reply to Rickard AnderssonSince the fastmap area has its own wear levelling it is valuable to provide a max erase counter value specifically for that area.
--- drivers/mtd/ubi/build.c | 43 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
drivers/mtd/ubi/build.c +43 -0
@@ -134,6 +134,8 @@ static struct device_attribute dev_max_ec =static struct device_attribute dev_mean_ec =__ATTR (mean_ec,S_IRUGO , dev_attribute_show,NULL );#ifdef CONFIG_MTD_UBI_FASTMAP +static struct device_attribute dev_max_ec_fastmap = +__ATTR (max_ec_fastmap,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_mean_ec_fastmap =__ATTR (mean_ec_fastmap,S_IRUGO , dev_attribute_show,NULL );#endif
@@ -384,6 +386,44 @@ static int ubi_calc_mean_ec(struct ubi_device *ubi, int start_peb, int end_peb)return mean_ec; } +/** +* ubi_calc_max_ec_fastmap - calculate max erase counter value. +* @ubi: UBI device description object +* @start_peb: First PEB in the range +* @end_peb: End PEB in the half-open range +* +* Returns the max erase counter value that can be found in the range. +* Range is half-open i.e end_peb is not actually included. +*/ +#ifdef CONFIG_MTD_UBI_FASTMAP +static int ubi_calc_max_ec (struct ubi_device *ubi,int start_peb,int end_peb) +{ +struct ubi_wl_entry *wl; +int peb; +int max_ec =0 ; + +for (peb = start_peb; peb < end_peb; peb++) { +int err; + + err =ubi_io_is_bad (ubi, peb); +if (err) +continue ; + +spin_lock (&ubi->wl_lock); + + wl = ubi->lookuptbl[peb]; +if (wl) { +if (max_ec < wl->ec) + max_ec = wl->ec; + } + +spin_unlock (&ubi->wl_lock); + } + +return max_ec; +} +#endif +/* "Show" method for files in '/<sysfs>/class/ubi/ubiX/' */ static ssize_t dev_attribute_show (struct device *dev,struct device_attribute *attr,char *buf)
@@ -416,6 +456,8 @@ static ssize_t dev_attribute_show(struct device *dev,else if (attr == &dev_mean_ec) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 , ubi->peb_count));#ifdef CONFIG_MTD_UBI_FASTMAP + else if (attr == &dev_max_ec_fastmap) + ret =sprintf (buf,"%d\n" ,ubi_calc_max_ec (ubi,0 ,UBI_FM_MAX_START )); else if (attr == &dev_mean_ec_fastmap) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 ,UBI_FM_MAX_START ));#endif
@@ -447,6 +489,7 @@ static struct attribute *ubi_dev_attrs[] = { &dev_max_ec.attr, &dev_mean_ec.attr, #ifdef CONFIG_MTD_UBI_FASTMAP + &dev_max_ec_fastmap.attr, &dev_mean_ec_fastmap.attr, #endif &dev_reserved_for_bad.attr,
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 4/10 ubi: Expose mean erase counter for data in sysfs
In reply to Rickard AnderssonExpose mean erase counter for data area in sysfs. Data area includes all blocks except for the fastmap area.
This value can be used in order to estimate life expectancy of the flash.
--- drivers/mtd/ubi/build.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mtd/ubi/build.c +5 -0
@@ -138,6 +138,8 @@ static struct device_attribute dev_max_ec_fastmap =__ATTR (max_ec_fastmap,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_mean_ec_fastmap =__ATTR (mean_ec_fastmap,S_IRUGO , dev_attribute_show,NULL ); +static struct device_attribute dev_mean_ec_data = +__ATTR (mean_ec_data,S_IRUGO , dev_attribute_show,NULL );#endif static struct device_attribute dev_reserved_for_bad =__ATTR (reserved_for_bad,S_IRUGO , dev_attribute_show,NULL );
@@ -460,6 +462,8 @@ static ssize_t dev_attribute_show(struct device *dev, ret =sprintf (buf,"%d\n" ,ubi_calc_max_ec (ubi,0 ,UBI_FM_MAX_START )); else if (attr == &dev_mean_ec_fastmap) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 ,UBI_FM_MAX_START )); + else if (attr == &dev_mean_ec_data) + ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,UBI_FM_MAX_START , ubi->peb_count));#endif else if (attr == &dev_reserved_for_bad) ret =sprintf (buf,"%d\n" , ubi->beb_rsvd_pebs);
@@ -491,6 +495,7 @@ static struct attribute *ubi_dev_attrs[] = {#ifdef CONFIG_MTD_UBI_FASTMAP &dev_max_ec_fastmap.attr, &dev_mean_ec_fastmap.attr, + &dev_mean_ec_data.attr, #endif &dev_reserved_for_bad.attr, &dev_bad_peb_count.attr,
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 5/10 ubi: Expose max erase counter for data in sysfs
In reply to Rickard AnderssonExpose max erase counter for data area in sysfs. Data area includes all blocks except for the fastmap area.
This value can be used in order to estimate life expectancy of the flash.
--- drivers/mtd/ubi/build.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mtd/ubi/build.c +5 -0
@@ -138,6 +138,8 @@ static struct device_attribute dev_max_ec_fastmap =__ATTR (max_ec_fastmap,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_mean_ec_fastmap =__ATTR (mean_ec_fastmap,S_IRUGO , dev_attribute_show,NULL ); +static struct device_attribute dev_max_ec_data = +__ATTR (max_ec_data,S_IRUGO , dev_attribute_show,NULL );static struct device_attribute dev_mean_ec_data =__ATTR (mean_ec_data,S_IRUGO , dev_attribute_show,NULL );#endif
@@ -462,6 +464,8 @@ static ssize_t dev_attribute_show(struct device *dev, ret =sprintf (buf,"%d\n" ,ubi_calc_max_ec (ubi,0 ,UBI_FM_MAX_START )); else if (attr == &dev_mean_ec_fastmap) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,0 ,UBI_FM_MAX_START )); + else if (attr == &dev_max_ec_data) + ret =sprintf (buf,"%d\n" ,ubi_calc_max_ec (ubi,UBI_FM_MAX_START , ubi->peb_count)); else if (attr == &dev_mean_ec_data) ret =sprintf (buf,"%d\n" ,ubi_calc_mean_ec (ubi,UBI_FM_MAX_START , ubi->peb_count));#endif
@@ -495,6 +499,7 @@ static struct attribute *ubi_dev_attrs[] = {#ifdef CONFIG_MTD_UBI_FASTMAP &dev_max_ec_fastmap.attr, &dev_mean_ec_fastmap.attr, + &dev_max_ec_data.attr, &dev_mean_ec_data.attr, #endif &dev_reserved_for_bad.attr,
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 6/10 ubi: Add mean erase counter sysfs attribute
In reply to Rickard AnderssonA mean erase counter gives a better understanding of the flash wear.
--- Documentation/ABI/stable/sysfs-class-ubi | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/ABI/stable/sysfs-class-ubi +7 -0
@@ -219,3 +219,10 @@ Description: Logical eraseblock size of this volume. Equivalent to logical eraseblock size of the device aligned on the volume alignment value. + +What: /sys/class/ubi/ubiX/mean_ec +Date: October 2024 +KernelVersion: 6.X +Contact: [email protected] +Description: + Mean physical eraseblock erase counter value.
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 7/10 ubi: Add mean erase counter sysfs attribute for fastmap area
In reply to Rickard AnderssonA mean erase counter gives a better understanding of the flash wear of the fastmap area.
--- Documentation/ABI/stable/sysfs-class-ubi | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/ABI/stable/sysfs-class-ubi +8 -0
@@ -226,3 +226,11 @@ KernelVersion: 6.X Contact: [email protected] Description: Mean physical eraseblock erase counter value. + +What: /sys/class/ubi/ubiX/mean_ec_fastmap +Date: October 2024 +KernelVersion: 6.X +Contact: [email protected] +Description: + Mean physical eraseblock erase counter value for the fastmap + area.
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 8/10 ubi: Add max erase counter sysfs attribute for fastmap area
In reply to Rickard AnderssonA max erase counter specifically for the fastmap area gives a better understanding of the flash wear.
--- Documentation/ABI/stable/sysfs-class-ubi | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/ABI/stable/sysfs-class-ubi +8 -0
@@ -78,6 +78,14 @@ Contact: Artem Bityutskiy <[email protected]> Description: Maximum physical eraseblock erase counter value. +What: /sys/class/ubi/ubiX/max_ec_fastmap +Date: October 2024 +KernelVersion: 6.X +Contact: [email protected] +Description: + Maximum physical eraseblock erase counter value for a block + in the fastmap area. + What: /sys/class/ubi/ubiX/max_vol_count Date: July 2006 KernelVersion: 2.6.22
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 9/10 ubi: Add mean erase counter sysfs attribute for data area
In reply to Rickard AnderssonData area includes all blocks except for the fastmap area.
--- Documentation/ABI/stable/sysfs-class-ubi | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/ABI/stable/sysfs-class-ubi +8 -0
@@ -242,3 +242,11 @@ Contact: [email protected] Description: Mean physical eraseblock erase counter value for the fastmap area. + +What: /sys/class/ubi/ubiX/mean_ec_data +Date: October 2024 +KernelVersion: 6.X +Contact: [email protected] +Description: + Mean physical eraseblock erase counter value for data area. + Data area includes all blocks except for the fastmap area.
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
PATCH v3 10/10 ubi: Add max erase counter sysfs attribute for data area
In reply to Rickard AnderssonData area includes all blocks except for the fastmap area.
--- Documentation/ABI/stable/sysfs-class-ubi | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/ABI/stable/sysfs-class-ubi +8 -0
@@ -86,6 +86,14 @@ Description: Maximum physical eraseblock erase counter value for a block in the fastmap area. +What: /sys/class/ubi/ubiX/max_ec_data +Date: October 2024 +KernelVersion: 6.X +Contact: [email protected] +Description: + Max physical eraseblock erase counter value for data area. + Data area includes all blocks except for the fastmap area. + What: /sys/class/ubi/ubiX/max_vol_count Date: July 2006 KernelVersion: 2.6.22
Signature · 6 lines
2.30.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Richard Weinberger
maintainer----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. an ioctl() that returns this data in binary form.
Thanks,
//richard
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Zhihao Cheng
reviewerQuoted 8 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. anioctl()that returns this data in binary form.
This method sounds better.
Quoted 6 lines
Thanks,
//richard.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Richard Weinberger
maintainer----- Ursprüngliche Mail -----
Quoted 13 lines
Von: "chengzhihao1" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]>
CC: "linux-mtd" <[email protected]>, "rickard314 andersson" <[email protected]>, "kernel" <[email protected]>
Gesendet: Donnerstag, 7. November 2024 02:39:45
Betreff: Re: [PATCH v3 01/10] ubi: Expose mean erase counter in sysfsQuoted 5 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
Quoted 5 lines
Quoted 3 lines
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. anioctl()that returns this data in binary form.This method sounds better.
Rickard, what do you think about this option?
Thanks,
//richard
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 18 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 17 lines
Von: "chengzhihao1" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]>
CC: "linux-mtd" <[email protected]>, "rickard314 andersson" <[email protected]>, "kernel" <[email protected]>
Gesendet: Donnerstag, 7. November 2024 02:39:45
Betreff: Re: [PATCH v3 01/10] ubi: Expose mean erase counter in sysfsQuoted 8 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. anioctl()that returns this data in binary form.
Quoted 6 lines
Quoted 1 line
This method sounds better.
Rickard, what do you think about this option?
Thanks,
//richard
Hi,
I would prefer to keep it in sysfs. We already have the following in sysfs (/sys/class/ubi/ubiX) that is related to flash wear:
-r--r--r-- 1 root root 4096 Oct 24 08:54 avail_eraseblocks -r--r--r-- 1 root root 4096 Nov 15 08:26 bad_peb_count -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec -r--r--r-- 1 root root 4096 Oct 24 08:54 reserved_for_bad
With my patch series the following will be added for normal builds:
-r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec
If fastmap is enabled (CONFIG_MTD_UBI_FASTMAP=y) also the following is added:
-r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_fastmap -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_fastmap
If you think the above is too "bloated" in the fastmap case (CONFIG_MTD_UBI_FASTMAP=y) we could reduce the additional files in the fastmap case to the following (More similar to my V1 version of the patch series):
-r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_fastmap
Thanks,
Rickard A.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Zhihao Cheng
reviewerQuoted 46 lines · Rickard x Andersson
Quoted 18 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 17 lines
Von: "chengzhihao1" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]>
CC: "linux-mtd" <[email protected]>, "rickard314 andersson" <[email protected]>, "kernel" <[email protected]>
Gesendet: Donnerstag, 7. November 2024 02:39:45
Betreff: Re: [PATCH v3 01/10] ubi: Expose mean erase counter in sysfsQuoted 8 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. anioctl()that returns this data in binary form.Quoted 6 lines
Quoted 1 line
This method sounds better.
Rickard, what do you think about this option?
Thanks,
//richardHi,
I would prefer to keep it in sysfs. We already have the following in sysfs (
/sys/class/ubi/ubiX) that is related to flash wear:(quoted diff) +0
-4-r--r--r-- 1 root root 4096 Oct 24 08:54 avail_eraseblocks -r--r--r-- 1 root root 4096 Nov 15 08:26 bad_peb_count -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec -r--r--r-- 1 root root 4096 Oct 24 08:54 reserved_for_badWith my patch series the following will be added for normal builds:
-r--r--r-- 1 root root 4096 Nov 15 08:26
mean_ecIf fastmap is enabled (
CONFIG_MTD_UBI_FASTMAP=y) also the following is added:(quoted diff) +0
-4-r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_fastmap -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_fastmap
Quoted 8 lines
If you think the above is too "bloated" in the fastmap case (
CONFIG_MTD_UBI_FASTMAP=y) we could reduce the additional files in the fastmap case to the following (More similar to my V1 version of the patch series):-r--r--r-- 1 root root 4096 Nov 15 08:26
mean_ec_fastmapThanks,
Rickard A..
Hi Rickard. Let's reorganize our thoughts.
1. We need to know the overall flash wear, including:
1) Is the flash over/approaching lifetime? - the 'max_ec' could tell us
2) How worn down the flash is in different areas? the 'mean_ec' could
tell us the overall situation, the 'mean_ec_data' and 'mean_ec_fastmap' could tell us more details in different areas.
3) Does the wear-leveling algorithm work correctly? the
'max_ec_data', 'min_ec_data' could be used to judge whether PEBs usage in data area is balanced,the 'max_ec_fastmap', 'min_ec_fastmap' could be used to judge whether PEBs usage in fastmap area is balanced.
2. Kernel only provides mechanisms, user program implements logic to satisfy what user wants.
3. I think points 1-1)~3) belongs to user requirements, they can be implemented according to the raw ec statistics(debugfs interface, or according to Richard's suggestion providing a new ioctl).
Why do I think points 1-1)~3) belong to user logic? They are customized and can only be used in specific scenarios, not like 'max_ec', 'bad_peb_count' and 'leb_size' which are general features of UBI and be widely used. For example, if someday one user wants to known the mediam ec count in data and fastmap areas, two interfaces will be added in sysfs, which looks bloated(There are too many bespoke interfaces under sysfs).
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Quoted 49 lines · Zhihao Cheng
Quoted 48 lines · Rickard x Andersson
Quoted 18 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 17 lines
Von: "chengzhihao1" <[email protected]>
An: "richard" <[email protected]>, "Rickard X Andersson" <[email protected]>
CC: "linux-mtd" <[email protected]>, "rickard314 andersson" <[email protected]>, "kernel" <[email protected]>
Gesendet: Donnerstag, 7. November 2024 02:39:45
Betreff: Re: [PATCH v3 01/10] ubi: Expose mean erase counter in sysfsQuoted 8 lines · Richard Weinberger
----- Ursprüngliche Mail -----
Quoted 3 lines
Von: "Rickard X Andersson" <[email protected]> There exists more detailed info in debugfs, but this information is only available for debug builds.
If the detailed info is useful for regular userspace we can also think of adding a non-debugfs interface for it.
E.g. anioctl()that returns this data in binary form.Quoted 6 lines
Quoted 1 line
This method sounds better.
Rickard, what do you think about this option?
Thanks,
//richardHi,
I would prefer to keep it in sysfs. We already have the following in sysfs (
/sys/class/ubi/ubiX) that is related to flash wear:(quoted diff) +0
-4-r--r--r-- 1 root root 4096 Oct 24 08:54 avail_eraseblocks -r--r--r-- 1 root root 4096 Nov 15 08:26 bad_peb_count -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec -r--r--r-- 1 root root 4096 Oct 24 08:54 reserved_for_badWith my patch series the following will be added for normal builds:
-r--r--r-- 1 root root 4096 Nov 15 08:26
mean_ecIf fastmap is enabled (
CONFIG_MTD_UBI_FASTMAP=y) also the following is added:(quoted diff) +0
-4-r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 max_ec_fastmap -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_data -r--r--r-- 1 root root 4096 Nov 15 08:26 mean_ec_fastmapIf you think the above is too "bloated" in the fastmap case (
CONFIG_MTD_UBI_FASTMAP=y) we could reduce the additional files in the fastmap case to the following (More similar to my V1 version of the patch series):
Quoted 8 lines
Quoted 6 lines
-r--r--r-- 1 root root 4096 Nov 15 08:26
mean_ec_fastmapThanks,
Rickard A..
Hi Rickard. Let's reorganize our thoughts.
Thanks for feedback.
Quoted 3 lines
1. We need to know the overall flash wear, including:
1) Is the flash over/approaching lifetime? - the 'max_ec' could tell us
On many devices max_ec is practically unusable. The reason for this being previous bugs in UBI causing single fastmap blocks to be written many many times. For example a situation where single fastmap block is written e.g. 60000 times and the rest of the fastmap blocks being written around 2000 times.
Quoted 8 lines
2) How worn down the flash is in different areas? the '
mean_ec' could
tell us the overall situation, the 'mean_ec_data' and 'mean_ec_fastmap' could tell us more details in different areas.
3) Does the wear-leveling algorithm work correctly? the
'max_ec_data', 'min_ec_data' could be used to judge whether PEBs usage in data area is balanced,the 'max_ec_fastmap', 'min_ec_fastmap' could be used to judge whether PEBs usage in fastmap area is balanced.
2. Kernel only provides mechanisms, user program implements logic to satisfy what user wants.
3. I think points 1-1)~3) belongs to user requirements, they can be implemented according to the raw ecstatistics(debugfs interface, or according to Richard's suggestion providing a new ioctl).
Why do I think points 1-1)~3) belong to user logic? They are customized and can only be used in specific scenarios, not like 'max_ec', 'bad_peb_count' and 'leb_size' which are general features of UBI and be widely used. For example, if someday one user wants to known the mediam ec count in data and fastmap areas, two interfaces will be added in sysfs, which looks bloated(There are too many bespoke interfaces under sysfs).
@Richard Weinberger, do you also prefer an IOCTL solution? Should I resend my patch series using IOCTL.
Thanks,
Rickard A.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/