U-boot enable not working for Raspberry Pi3
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT = "1"
to enable u-boot for the raspberrypi. I have set that variable in the top level local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
It appears that I'm missing necessary to turn u-boot on, can anybody shed some light on what is going on?
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
Quoted 5 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"
Hi. I'm working with the U-Boot and RPI3 at the moment as well. I'm using warrior revision and not using the Qt at all though. In my case setting the above variable was enough to build the U-Boot and include it in the final image.
In my case the platform boots into the Linux. I'm having issues with weird artifacts and resolution on the HDMI display, though. I believe this may be related to the U-Boot patching DTB to add the
simplefb: https://github.com/u-boot/u-boot/blob/master/board/raspberrypi/rpi/rpi.c#L490
while I want to keep using the brcm fb with userland etc. (proprietary stuff).
Quoted 9 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
It appears that I'm missing necessary to turn u-boot on, can anybody shed some light on what is going on?
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
Signature · 3 lines
Maciej Pijanowski Embedded Systems Engineer https://3mdeb.com | @3mdeb_com
Hi Greg,
Quoted 6 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"
Could be tha tboot2qt somehow drop your config. Please try tin run bitbake -e <IMAGE_NAME> | grep ^RPI_USE_U_BOOT to be sure that variable exists. I used it many times and it works perfectly fine.
Quoted 7 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
It appears that I'm missing necessary to turn u-boot on, can anybody shed some light on what is going on?
Regards,
Quoted 7 lines
Greg Wilson-Lindberg
www.sakuraus.com
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
BR,
marek
Signature · 10 lines
as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com
Hi Marek,
Thanks for the suggestion, that seems to be the case. What image are you building so I can try that to see what I get?
BR,
Greg
Quoted 56 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:12 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 2 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying
to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
Quoted 4 lines
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"Could be tha tboot2qt somehow drop your config. Please try tin run bitbake -e <
IMAGE_NAME> | grep ^RPI_USE_U_BOOT to be sure that variable exists. I used it many times and it works perfectly fine.Quoted 2 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level
local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
Quoted 2 lines
It appears that I'm missing necessary to turn u-boot on, can anybody shed some
light on what is going on?
Quoted 10 lines
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoBR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance DeveloperRuska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
Hi Greg,
Quoted 4 lines · Greg Wilson-Lindberg
Hi Marek,
Thanks for the suggestion, that seems to be the case. What image are you building so I can try that to see what I get?
Please don't top post ;). I'm building basic image. I worked few months ago with bootqt and sometimes it was bit tricky ;). Are you sure you have this variable set in local.conf?
Quoted 60 lines
BR,
GregQuoted 56 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:12 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 2 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying
to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
Quoted 4 lines
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"Could be tha tboot2qt somehow drop your config. Please try tin run bitbake -e <
IMAGE_NAME> | grep ^RPI_USE_U_BOOT to be sure that variable exists. I used it many times and it works perfectly fine.Quoted 2 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level
local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
Quoted 2 lines
It appears that I'm missing necessary to turn u-boot on, can anybody shed some
light on what is going on?
Quoted 10 lines
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoBR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance DeveloperRuska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
BR,
marek
Hi Marek,
Quoted 12 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:40 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 1 line · Greg Wilson-Lindberg
Quoted 7 lines
Quoted 3 lines
Hi Marek,
Thanks for the suggestion, that seems to be the case. What image are you
building so I can try that to see what I get?
Please don't top post ;). I'm building basic image. I worked few months ago with bootqt and sometimes it was bit tricky ;). Are you sure you have this variable set in local.conf?
Here is an excerpt from my local.conf file:
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you. CONF_VERSION = "1"
#
# Custom additions
#
# Additional dtbo'sKERNEL_DEVICETREE_remove = " overlays/mcp2515-can0.dtbo overlays/mcp2515-can1.dtbo"
# Fixes for inclusion of mysql
PACKAGECONFIG_append_pn-qtbase += " sql-mysql" QT_CONFIG_FLAGS_append_pn-qtbase += " -I /usr/include/mysql" QT_CONFIG_FLAGS_append_pn-qtbase += " -I ${STAGING_DIR_TARGET}/usr/include/mysql"
RPI_USE_U_BOOT = "1"
# End Custom additions
#
#INHERIT += "rm_work"
INHERIT += "image-buildinfo"
INHERIT += "internal-build"
I copied the line from the meta-raspberrypi documentation so I think it should be formatted correctly. I know the mysql stuff is working correctly.
I tried bitbake -e core-image-minmal and I don't get it being set then either.
Quoted 65 lines
Quoted 64 lines
BR,
GregQuoted 60 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:12 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 3 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying
to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
Quoted 4 lines
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"Could be tha tboot2qt somehow drop your config. Please try tin run bitbake -e <
IMAGE_NAME> | grep ^RPI_USE_U_BOOT to be sure that variable exists. I used it many times and it works perfectly fine.Quoted 3 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level
local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
Quoted 3 lines
It appears that I'm missing necessary to turn u-boot on, can anybody shed some
light on what is going on?
Quoted 10 lines
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoBR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance DeveloperRuska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
Quoted 3 lines
BR,
marek
BR,
Greg
Hi Marek,
I'm going to top post so you don't have to scroll to the meat of the matter.
I had rebuilt my system because of a failing main hard disk and had lost settings on a number of the programs that I had to re-install and didn't notice. One that has obviously caused me problems is that the editor that I use I keep set to automatically save any changes on loss of focus. I had changed the local.conf file, but I didn't realize that it hadn't written out the changes.
I realized yesterday that the editor wasn't working as I expected and fixed the setting and went on. This morning I rebuilt my yocto system and it rebuilt more than I expected and when I installed it and booted, much to my surprise I realized that u-boot was being executed.
So sorry for the false concern, and thank you for the help and maybe someone will learn something from either my mistake or from your helpful responses.
Best Regards,
Greg Wilson-Lindberg
Quoted 138 lines
-----Original Message-----
From: Greg Wilson-Lindberg
Sent: Tuesday, August 06, 2019 12:03 PM
To: Belisko Marek <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: RE: [yocto] U-boot enable not working for Raspberry Pi3Hi Marek,
Quoted 13 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:40 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 1 line · Greg Wilson-Lindberg
Quoted 8 lines
Quoted 4 lines
Hi Marek,
Thanks for the suggestion, that seems to be the case. What image are you
building so I can try that to see what I get?
Please don't top post ;). I'm building basic image. I worked few months ago with bootqt and sometimes it was bit tricky ;). Are you sure you have this variable set in local.conf?Here is an excerpt from my local.conf file:
#
CONF_VERSIONis increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if # this doesn't mean anything to you.CONF_VERSION= "1"#
# Custom additions
## Additional dtbo's
KERNEL_DEVICETREE_remove= " overlays/mcp2515-can0.dtbo overlays/mcp2515-can1.dtbo"# Fixes for inclusion of mysql PACKAGECONFIG_append_pn-qtbase += " sql-mysql" QT_CONFIG_FLAGS_append_pn-qtbase += " -I
/usr/include/mysql" QT_CONFIG_FLAGS_append_pn-qtbase += " -I ${STAGING_DIR_TARGET}/usr/include/mysql"
RPI_USE_U_BOOT= "1"# End Custom additions
##INHERIT += "
rm_work"
INHERIT += "image-buildinfo"
INHERIT += "internal-build"I copied the line from the meta-raspberrypi documentation so I think it should be formatted correctly. I know the mysql stuff is working correctly.
I tried bitbake -e core-image-minmal and I don't get it being set then either.
Quoted 65 lines
Quoted 64 lines
BR,
GregQuoted 60 lines
-----Original Message-----
From: Belisko Marek [mailto:[email protected]]
Sent: Tuesday, August 06, 2019 11:12 AM
To: Greg Wilson-Lindberg <[email protected]>
Cc: Yocto list discussion <[email protected]>
Subject: Re: [yocto] U-boot enable not working for Raspberry Pi3Hi Greg,
Quoted 3 lines · Greg Wilson-Lindberg
I'm working with a Yocto Sumo build provided with Qt's boot2qt system. I'm trying
to enable using Das U-boot to load Linux as a first step in trying to enable OSTree updates.
Quoted 4 lines
In the meta-raspberrypi documentation is says to set:
RPI_USE_U_BOOT= "1"Could be tha tboot2qt somehow drop your config. Please try tin run bitbake -e <
IMAGE_NAME> | grep ^RPI_USE_U_BOOT to be sure that variable exists. I used it many times and it works perfectly fine.Quoted 3 lines
to enable u-boot for the raspberrypi. I have set that variable in the top level
local.conf file but I don't seem to be getting any changes in the build. Nothing in the cooker log shows building u-boot, and the start up screen doesn't show any u-boot messages.
Quoted 3 lines
It appears that I'm missing necessary to turn u-boot on, can anybody shed some
light on what is going on?
Quoted 10 lines
Regards,
Greg Wilson-Lindberg
www.sakuraus.com
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yoctoBR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance DeveloperRuska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.comQuoted 3 lines
BR,
marek
BR,
Greg