Skip to contentSkip to conversation

ARP Bug?

DISCUSSION Matti Linnanvuori 3 participants 4 messages Jan 30, 2008

lore
Share & tools
lore
#0 lore raw

Jan Engelhardt:

Quoted 8 lines · Matti Linnanvuori

Jan Engelhardt:

Quoted 4 lines
Quoted 2 lines

If you have the same subnet on multiple interfaces, only the first interface will be served.

Does that comply with the standard?

What standard?

ARP standard. I think it is RFC 826:
An Ethernet Address Resolution Protocol

      ____________________________________________________________________________________

Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs

#1 lore raw
Quoted 3 lines · Matti Linnanvuori

ARP standard. I think it is RFC 826:
An Ethernet Address Resolution Protocol

The correct standard in this case is RFC1122 and it actually offers two options for this: the so called strong end host model and the weak end host model. Linux can be configured to be both. Default is the later.

-Andi

#2 lore raw
Quoted 9 lines · Andi Kleen
Quoted 3 lines · Matti Linnanvuori

ARP standard. I think it is RFC 826:
An Ethernet Address Resolution Protocol

The correct standard in this case is RFC1122 and it actually offers two options for this: the so called strong end host model and the weak end host model. Linux can be configured to be both. Default is the later.

By use of a bridge interface, yeah. Are there other ways to get the strong end host model?

#3 lore raw
In reply to Matti Linnanvuori
Quoted 11 lines · Matti Linnanvuori
Quoted 8 lines · Matti Linnanvuori

Jan Engelhardt:

Quoted 4 lines
Quoted 2 lines

If you have the same subnet on multiple interfaces, only the first interface will be served.

Does that comply with the standard?

What standard?

ARP standard. I think it is RFC 826:
An Ethernet Address Resolution Protocol

Please quote the section where it says that routing implementations MUST round-robin over a group of interfaces with same subnet.