Add support of unmanaged domain to mediatek IOMMU
Subsystems (5)
cover Add support of unmanaged domain to mediatek IOMMU
Mediatek mt8365 SoC APU support (AI Processor Unit) is being upstremed. This device, behind an IOMMU uses remoteproc which requires unmanaged domain. This updates the iommu driver to support unmanaged iommu domain and let remoteproc use the IOMMU.
Alexandre Bailon (3):
dt-bindings: memory: mediatek: Add support of unmanaged iommu domain
iommu: mediatek: Add support of unmanaged iommu domain
dt-bindings: iommu: memory: Use unmanaged iommu domain for the APU
drivers/iommu/mtk_iommu.c | 6 ++++++ include/dt-bindings/memory/mediatek,mt8365-larb-port.h | 4 ++-- include/dt-bindings/memory/mtk-memory-port.h | 3 +++ 3 files changed, 11 insertions(+), 2 deletions(-)
Signature · 1 line
2.38.2
PATCH 1/3 dt-bindings: memory: mediatek: Add support of unmanaged iommu domain
Currently, the only way to have an unmanaged domain for a device is having a dedicated iova region or bank.
This adds a new bit to MTK_M4U_ID that allows defining devices that needs unmanaged iommu domain.
--- include/dt-bindings/memory/mtk-memory-port.h | 3 +++ 1 file changed, 3 insertions(+)
include/dt-bindings/memory/mtk-memory-port.h +3 -0
@@ -7,11 +7,14 @@#define __DT_BINDINGS_MEMORY_MTK_MEMORY_PORT_H_#define MTK_LARB_NR_MAX 32 +#define MTK_UNMANAGED_DEVICE (1 << 31)#define MTK_M4U_ID (larb, port) (((larb) << 5) | (port))#define MTK_M4U_TO_LARB (id) (((id) >> 5) & 0x1f)#define MTK_M4U_TO_PORT (id) ((id) & 0x1f) +#define MTK_M4U_UNMANAGED (id) ((id) & MTK_UNMANAGED_DEVICE)#define MTK_IFAIOMMU_PERI_ID (port) MTK_M4U_ID(0, port) +#define MTK_M4U_UNMANAGED_ID (larb, port) (MTK_M4U_ID(larb, port) | MTK_UNMANAGED_DEVICE)#endif
Signature · 1 line
2.38.2
Re: [PATCH 1/3] dt-bindings: memory: mediatek: Add support of unmanaged iommu domain
Quoted 19 lines · Alexandre Bailon
Currently, the only way to have an unmanaged domain for a device is having a dedicated iova region or bank.
This adds a new bit toMTK_M4U_IDthat allows defining devices that needs unmanaged iommu domain.Signed-off-by Alexandre Bailon <[email protected]>--- include/dt-bindings/memory/mtk-memory-port.h | 3 +++ 1 file changed, 3 insertions(+)include/dt-bindings/memory/mtk-memory-port.h +1
-0@@ -7,11 +7,14 @@#define __DT_BINDINGS_MEMORY_MTK_MEMORY_PORT_H_#define MTK_LARB_NR_MAX 32 +#define MTK_UNMANAGED_DEVICE (1 << 31)
include/dt-bindings/memory/mtk-memory-port.h line 20
Quoted 10 lines
include/dt-bindings/memory/mtk-memory-port.h +2
-0#define MTK_M4U_ID (larb, port) (((larb) << 5) | (port))#define MTK_M4U_TO_LARB (id) (((id) >> 5) & 0x1f)#define MTK_M4U_TO_PORT (id) ((id) & 0x1f) +#define MTK_M4U_UNMANAGED (id) ((id) & MTK_UNMANAGED_DEVICE)#define MTK_IFAIOMMU_PERI_ID (port) MTK_M4U_ID(0, port) +#define MTK_M4U_UNMANAGED_ID (larb, port) (MTK_M4U_ID(larb, port) | MTK_UNMANAGED_DEVICE)#endif
Robin Murphy
reviewerRe: [PATCH 1/3] dt-bindings: memory: mediatek: Add support of unmanaged iommu domain
In reply to Alexandre BailonQuoted 4 lines · Alexandre Bailon
Currently, the only way to have an unmanaged domain for a device is having a dedicated iova region or bank.
This adds a new bit toMTK_M4U_IDthat allows defining devices that needs unmanaged iommu domain.
These are details of Linux-specific usage policy, so don't belong in DT bindings. I believe the driver already has some internal data to make its own assignment of particular devices into particular groups, so please just add to that.
Thanks,
Robin.
Quoted 24 lines
Signed-off-by Alexandre Bailon <[email protected]>--- include/dt-bindings/memory/mtk-memory-port.h | 3 +++ 1 file changed, 3 insertions(+)include/dt-bindings/memory/mtk-memory-port.h +3
-0@@ -7,11 +7,14 @@#define __DT_BINDINGS_MEMORY_MTK_MEMORY_PORT_H_#define MTK_LARB_NR_MAX 32 +#define MTK_UNMANAGED_DEVICE (1 << 31)#define MTK_M4U_ID (larb, port) (((larb) << 5) | (port))#define MTK_M4U_TO_LARB (id) (((id) >> 5) & 0x1f)#define MTK_M4U_TO_PORT (id) ((id) & 0x1f) +#define MTK_M4U_UNMANAGED (id) ((id) & MTK_UNMANAGED_DEVICE)#define MTK_IFAIOMMU_PERI_ID (port) MTK_M4U_ID(0, port) +#define MTK_M4U_UNMANAGED_ID (larb, port) (MTK_M4U_ID(larb, port) | MTK_UNMANAGED_DEVICE)#endif
PATCH 2/3 iommu: mediatek: Add support of unmanaged iommu domain
In reply to Alexandre BailonCurrently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region. This updates the driver to also support unmanaged iommu domain if MTK_UNMANAGED_DEVICE is set in the iommu id.
--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/iommu/mtk_iommu.c +6 -0
@@ -858,9 +858,15 @@ static int mtk_iommu_get_group_id(struct device *dev, const struct mtk_iommu_plastatic struct iommu_group *mtk_iommu_device_group (struct device *dev) {struct mtk_iommu_data *c_data =dev_iommu_priv_get (dev), *data; +struct iommu_fwspec *fwspec =dev_iommu_fwspec_get (dev);struct list_head *hw_list = c_data->hw_list;struct iommu_group *group;int groupid; +int i; + +for (i =0 ; i < fwspec->num_ids; i++) +if (MTK_M4U_UNMANAGED (fwspec->ids[i])) +return iommu_group_alloc (); data =mtk_iommu_get_frst_data (hw_list);if (!data)
Signature · 1 line
2.38.2
Re: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Quoted 6 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region. This updates the driver to also support unmanaged iommu domain if
MTK_UNMANAGED_DEVICEis set in the iommu id.Signed-off-by Alexandre Bailon <[email protected]>
Robin Murphy
reviewerRe: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
In reply to Alexandre BailonQuoted 2 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region.
That is for good reason - there is only a single pagetable per bank, so if there are multiple devices assigned to a single bank, they cannot possibly be attached to different domains at the same time. Hence why the banks are modelled as groups.
Thanks,
Robin.
Quoted 28 lines
This updates the driver to also support unmanaged iommu domain if
MTK_UNMANAGED_DEVICEis set in the iommu id.Signed-off-by Alexandre Bailon <[email protected]>--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +6
-0@@ -858,9 +858,15 @@ static int mtk_iommu_get_group_id(struct device *dev, const struct mtk_iommu_plastatic struct iommu_group *mtk_iommu_device_group (struct device *dev) {struct mtk_iommu_data *c_data =dev_iommu_priv_get (dev), *data; +struct iommu_fwspec *fwspec =dev_iommu_fwspec_get (dev);struct list_head *hw_list = c_data->hw_list;struct iommu_group *group;int groupid; +int i; + +for (i =0 ; i < fwspec->num_ids; i++) +if (MTK_M4U_UNMANAGED (fwspec->ids[i])) +return iommu_group_alloc (); data =mtk_iommu_get_frst_data (hw_list);if (!data)
Re: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Hi Robin
Quoted 5 lines · Robin Murphy
Quoted 2 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region.
That is for good reason - there is only a single pagetable per bank, so if there are multiple devices assigned to a single bank, they cannot possibly be attached to different domains at the same time. Hence why the banks are modelled as groups.
I understand.
I am trying to upstream a remoteproc driver but the remote processor is behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain. I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?
Thanks,
Alexandre
Quoted 32 lines
Thanks,
Robin.Quoted 28 lines
This updates the driver to also support unmanaged iommu domain if
MTK_UNMANAGED_DEVICEis set in the iommu id.Signed-off-by Alexandre Bailon <[email protected]>---
drivers/iommu/mtk_iommu.c| 6 ++++++1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +6
-0@@ -858,9 +858,15 @@ static int mtk_iommu_get_group_id(struct device *dev, const struct mtk_iommu_pla static struct iommu_group *mtk_iommu_device_group(struct device *dev) { struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data; + struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); struct list_head *hw_list = c_data->hw_list; struct iommu_group *group; int groupid; + int i; + + for (i = 0; i < fwspec->num_ids; i++) + if (MTK_M4U_UNMANAGED(fwspec->ids[i])) + return iommu_group_alloc(); data = mtk_iommu_get_frst_data(hw_list); if (!data)
Robin Murphy
reviewerRe: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Quoted 7 lines · Alexandre Bailon
Hi Robin
Quoted 4 lines · Robin Murphy
Quoted 2 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region.
Quoted 8 lines
Quoted 1 line
That is for good reason - there is only a single pagetable per bank, so if there are multiple devices assigned to a single bank, they cannot possibly be attached to different domains at the same time. Hence why the banks are modelled as groups.
I understand.
I am trying to upstream a remoteproc driver but the remote processor is behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain. I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?
If there are other active devices behind the same IOMMU, and the remoteproc device cannot be isolated into its own bank using the existing IOMMU driver logic, then the remoteproc driver cannot manage the IOMMU directly, and must just use the regular DMA API. There's no way around it; you can't have two different parts of the kernel both thinking they have exclusive control of a single IOMMU address space at the same time. Similarly, remoteproc also cannot take explicit control of a multi-device group if it's not actually in control of the other devices, since their drivers will not be expecting the DMA address space to suddenly change underfoot - that's why iommu_attach_device() has the check which you presumably ran into.
Thanks,
Robin.
Re: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Quoted 17 lines · Robin Murphy
Quoted 7 lines · Alexandre Bailon
Hi Robin
Quoted 4 lines · Robin Murphy
Quoted 2 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova region.
Quoted 8 lines
Quoted 1 line
That is for good reason - there is only a single pagetable per bank, so if there are multiple devices assigned to a single bank, they cannot possibly be attached to different domains at the same time. Hence why the banks are modelled as groups.
I understand.
I am trying to upstream a remoteproc driver but the remote processor is behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain. I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?
Quoted 1 line
If there are other active devices behind the same IOMMU, and the remoteproc device cannot be isolated into its own bank using the existing IOMMU driver logic, then the remoteproc driver cannot manage the IOMMU directly, and must just use the regular DMA API. There's no way around it; you can't have two different parts of the kernel both thinking they have exclusive control of a single IOMMU address space at the same time. Similarly, remoteproc also cannot take explicit control of a multi-device group if it's not actually in control of the other devices, since their drivers will not be expecting the DMA address space to suddenly change underfoot - that's why
iommu_attach_device()has the check which you presumably ran into.
Unfortunately, we can't just use the regular DMA API.
Basically, the firmware use static addresses (and the remote core is only supposed to access addresses between 0x60000000 and 0x70000000). When we use DMA API, we get a random address that doesn't match what the
firmware would expect.
remoteproc use directly the iommu API to map physical address to the
static address expected by the firmware when DMA API can't be use.
Thanks,
Alexandre
Yong Wu (吴勇)
maintainerRe: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Quoted 50 lines · Alexandre Bailon
Quoted 39 lines · Robin Murphy
Quoted 17 lines · Alexandre Bailon
Hi Robin
Quoted 6 lines · Robin Murphy
Quoted 4 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova
region.Quoted 7 lines
That is for good reason - there is only a single pagetable per bank,
so if there are multiple devices assigned to a single bank, they
cannot possibly be attached to different domains at the same time.
Hence why the banks are modelled as groups.Quoted 9 lines
I understand.
I am trying to upstream a remoteproc driver but the remote processor is
behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain.
I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?If there are other active devices behind the same IOMMU, and the remoteproc device cannot be isolated into its own bank using the existing IOMMU driver logic, then the remoteproc driver cannot manage
the IOMMU directly, and must just use the regular DMA API. There's no
way around it; you can't have two different parts of the kernel both
thinking they have exclusive control of a single IOMMU address space at
the same time. Similarly, remoteproc also cannot take explicitQuoted 8 lines
control
of a multi-device group if it's not actually in control of the other
devices, since their drivers will not be expecting the DMA address space
to suddenly change underfoot - that's whyiommu_attach_device()has the
check which you presumably ran into.
Quoted 8 lines
Unfortunately, we can't just use the regular DMA API. Basically, the firmware use static addresses (and the remote core is only supposed to access addresses between
0x60000000and0x70000000). When we use DMA API, we get a random address that doesn't match what the
firmware would expect.
remoteproc use directly the iommu API to map physical address to the static address expected by the firmware when DMA API can't be use.
If this master can only support this special address, We could handle it inside this driver.
Could you help try to add these two patches [3/11] and [4/11]?
[3/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
[4/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
and, then add the logical for mt8365(I see the APU is larb0 port10/11 in the binding):
--------------------------------
+#define MT8365_REGION_NR 2
+
+static const struct mtk_iommu_iova_region
mt8365_multi_rgn[MT8365_REGION_NR] = {
+ { .iova_base = 0x0, .size = SZ_4G}, /* 0 ~
4G. */
+ { .iova_base = 0x60000000, .size = SZ_256M}, /* APU
*/
+};
+
xxxxxxxxxxx
+static const unsigned int mt8365_larb_region_msk[MT8365_REGION_NR][MTK_LARB_NR_MAX] = {
+ [0] = {~(u32)(BIT(10) | BIT(11)), ~0, ~0, ~0, ~0, ~0},
+ [1] = {[0] = BIT(10) | BIT(11)},
+};
+
static const struct mtk_iommu_plat_data mt8365_data = {
.m4u_plat = M4U_MT8365,
.flags = RESET_AXI | INT_ID_PORT_WIDTH_6,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.banks_num = 1,
.banks_enable = {true},
- .iova_region = single_domain,
- .iova_region_nr = ARRAY_SIZE(single_domain),
+ .iova_region = mt8365_multi_rgn,
+ .iova_region_nr = ARRAY_SIZE(mt8365_multi_rgn),
+ .iova_region_larb_msk = mt8365_larb_region_msk,
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear
mapping. */
};
--------------------------------
After that, If we call DMA API with the device whose dtsi has M4U_PORT_APU_READ/M4U_PORT_APU_WRITE. The iova should be located at that special address. Sorry, I have no board to test.
Thanks.
Quoted 4 lines
Thanks,
Alexandre
Re: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Hi,
Sorry for long delay before the response.
Quoted 110 lines · Yong Wu (吴勇)
Quoted 50 lines · Alexandre Bailon
Quoted 39 lines · Robin Murphy
Quoted 17 lines · Alexandre Bailon
Hi Robin
Quoted 6 lines · Robin Murphy
Quoted 4 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova
region.Quoted 7 lines
That is for good reason - there is only a single pagetable per bank,
so if there are multiple devices assigned to a single bank, they
cannot possibly be attached to different domains at the same time.
Hence why the banks are modelled as groups.Quoted 9 lines
I understand.
I am trying to upstream a remoteproc driver but the remote processor is
behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain.
I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?If there are other active devices behind the same IOMMU, and the remoteproc device cannot be isolated into its own bank using the existing IOMMU driver logic, then the remoteproc driver cannot manage
the IOMMU directly, and must just use the regular DMA API. There's no
way around it; you can't have two different parts of the kernel both
thinking they have exclusive control of a single IOMMU address space at
the same time. Similarly, remoteproc also cannot take explicitQuoted 8 lines
control
of a multi-device group if it's not actually in control of the other
devices, since their drivers will not be expecting the DMA address space
to suddenly change underfoot - that's whyiommu_attach_device()has the
check which you presumably ran into.Quoted 8 lines
Unfortunately, we can't just use the regular DMA API. Basically, the firmware use static addresses (and the remote core is only supposed to access addresses between
0x60000000and0x70000000). When we use DMA API, we get a random address that doesn't match what the
firmware would expect.
remoteproc use directly the iommu API to map physical address to the static address expected by the firmware when DMA API can't be use.If this master can only support this special address, We could handle it inside this driver.
Could you help try to add these two patches [3/11] and [4/11]?
[3/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
[4/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/and, then add the logical for mt8365(I see the APU is larb0 port10/11 in the binding):
--------------------------------(quoted diff) +3
-0+#define MT8365_REGION_NR 2 + +static const struct mtk_iommu_iova_regionmt8365_multi_rgn[MT8365_REGION_NR] = {
(quoted diff) +1
-0+ { .iova_base = 0x0, .size = SZ_4G}, /* 0 ~4G. */
(quoted diff) +1
-0+ { .iova_base = 0x60000000, .size = SZ_256M}, /* APU*/
(quoted diff) +2
-0+}; +xxxxxxxxxxx
+static const unsigned int mt8365_larb_region_msk[MT8365_REGION_NR][MTK_LARB_NR_MAX] = {
(quoted diff) +7
-2+ [0] = {~(u32)(BIT(10) | BIT(11)), ~0, ~0, ~0, ~0, ~0}, + [1] = {[0] = BIT(10) | BIT(11)}, +}; + static const struct mtk_iommu_plat_data mt8365_data = { .m4u_plat = M4U_MT8365, .flags = RESET_AXI | INT_ID_PORT_WIDTH_6, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, .banks_num = 1, .banks_enable = {true}, - .iova_region = single_domain, - .iova_region_nr = ARRAY_SIZE(single_domain), + .iova_region = mt8365_multi_rgn, + .iova_region_nr = ARRAY_SIZE(mt8365_multi_rgn), + .iova_region_larb_msk = mt8365_larb_region_msk, .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linearmapping. */
};
--------------------------------
Quoted 4 lines
After that, If we call DMA API with the device whose dtsi has M4U_PORT_APU_READ/M4U_PORT_APU_WRITE. The iova should be located at that special address. Sorry, I have no board to test.
I have not yet tested the patches but it will only address one part of the problem.
Using your patches, I could allocate some shared memory using DMA API but the main issue still remain.
The firmware is not relocatable at all. So, once the firmware is built, it is expected to be loaded at a specific address.
Remoteproc framework support this use case. Using the resource table, the firmware expose to remoteproc what device address is expect and remoteproc manually call iommu_map to satisfy this requirement. Using DMA_API, I could allocate the memory to load the firmware but I could not be sure that the DMA address will be the one expected by firmware.
Thanks,
Alexandre
Robin Murphy
reviewerRe: [PATCH 2/3] iommu: mediatek: Add support of unmanaged iommu domain
Quoted 115 lines · Alexandre Bailon
Hi,
Sorry for long delay before the response.
Quoted 110 lines · Yong Wu (吴勇)
Quoted 50 lines · Alexandre Bailon
Quoted 39 lines · Robin Murphy
Quoted 17 lines · Alexandre Bailon
Hi Robin
Quoted 6 lines · Robin Murphy
Quoted 4 lines · Alexandre Bailon
Currently, the driver can allocate an unmanaged iommu domain. But, this only works for SoC having multiple bank or multiple iova
region.Quoted 7 lines
That is for good reason - there is only a single pagetable per bank,
so if there are multiple devices assigned to a single bank, they
cannot possibly be attached to different domains at the same time.
Hence why the banks are modelled as groups.Quoted 9 lines
I understand.
I am trying to upstream a remoteproc driver but the remote processor is
behind the iommu.
remoteproc can manage the iommu but it requires an unmanaged domain.
I tried a couple of things but this cause code duplication, implies many hacks and not always reliable.
Do you have any suggestion ?If there are other active devices behind the same IOMMU, and the remoteproc device cannot be isolated into its own bank using the existing IOMMU driver logic, then the remoteproc driver cannot manage
the IOMMU directly, and must just use the regular DMA API. There's no
way around it; you can't have two different parts of the kernel both
thinking they have exclusive control of a single IOMMU address space at
the same time. Similarly, remoteproc also cannot take explicitQuoted 8 lines
control
of a multi-device group if it's not actually in control of the other
devices, since their drivers will not be expecting the DMA address space
to suddenly change underfoot - that's whyiommu_attach_device()has the
check which you presumably ran into.Quoted 8 lines
Unfortunately, we can't just use the regular DMA API. Basically, the firmware use static addresses (and the remote core is only supposed to access addresses between
0x60000000and0x70000000). When we use DMA API, we get a random address that doesn't match what the
firmware would expect.
remoteproc use directly the iommu API to map physical address to the static address expected by the firmware when DMA API can't be use.If this master can only support this special address, We could handle it inside this driver.
Could you help try to add these two patches [3/11] and [4/11]?
[3/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
[4/11]
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/and, then add the logical for mt8365(I see the APU is larb0 port10/11 in the binding):
--------------------------------(quoted diff) +3
-0+#define MT8365_REGION_NR 2 + +static const struct mtk_iommu_iova_regionmt8365_multi_rgn[MT8365_REGION_NR] = {
+ { .iova_base = 0x0, .size = SZ_4G}, /* 0 ~ 4G. */
+ { .iova_base = 0x60000000, .size = SZ_256M}, /* APU */(quoted diff) +2
-0+}; +xxxxxxxxxxx
+static const unsigned int mt8365_larb_region_msk[MT8365_REGION_NR][MTK_LARB_NR_MAX] = { + [0] = {~(u32)(BIT(10) | BIT(11)), ~0, ~0, ~0, ~0, ~0}, + [1] = {[0] = BIT(10) | BIT(11)},
(quoted diff) +2
-0+}; +static const struct
mtk_iommu_plat_datamt8365_data= { .m4u_plat =M4U_MT8365,
.flags =RESET_AXI|INT_ID_PORT_WIDTH_6, .inv_sel_reg =REG_MMU_INV_SEL_GEN1, .banks_num = 1,
.banks_enable = {true},
- .iova_region =single_domain,
- .iova_region_nr =ARRAY_SIZE(single_domain),
+ .iova_region =mt8365_multi_rgn,
+ .iova_region_nr =ARRAY_SIZE(mt8365_multi_rgn), + .iova_region_larb_msk =mt8365_larb_region_msk, .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
};
--------------------------------
Quoted 10 lines
Quoted 4 lines
After that, If we call DMA API with the device whose dtsi has M4U_PORT_APU_READ/M4U_PORT_APU_WRITE. The iova should be located at that special address. Sorry, I have no board to test.
I have not yet tested the patches but it will only address one part of the problem.
Using your patches, I could allocate some shared memory using DMA API but the main issue still remain.
The firmware is not relocatable at all. So, once the firmware is built, it is expected to be loaded at a specific address.
Remoteproc framework support this use case. Using the resource table, the firmware expose to remoteproc what device address is expect and remoteproc manually calliommu_mapto satisfy this requirement. UsingDMA_API, I could allocate the memory to load the firmware but I could not be sure that the DMA address will be the one expected by firmware.
I think the solution to this is now to use the new DT binding to require an IOMMU identity mapping of the firmware region[1], such that it's all taken care of for you.
Thanks,
Robin.
PATCH 3/3 dt-bindings: iommu: memory: Use unmanaged iommu domain for the APU
In reply to Alexandre BailonThis updates the iommu id to use unmanaged iommu domain for the APU. This is required by remoteproc to use the iommu.
--- include/dt-bindings/memory/mediatek,mt8365-larb-port.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/dt-bindings/memory/mediatek,mt8365-larb-port.h +2 -2
@@ -24,8 +24,8 @@#define M4U_PORT_MDP_WROT0 MTK_M4U_ID(M4U_LARB0_ID, 7)#define M4U_PORT_MDP_RDMA1 MTK_M4U_ID(M4U_LARB0_ID, 8)#define M4U_PORT_DISP_FAKE0 MTK_M4U_ID(M4U_LARB0_ID, 9) -#define M4U_PORT_APU_READ MTK_M4U_ID(M4U_LARB0_ID, 10) -#define M4U_PORT_APU_WRITE MTK_M4U_ID(M4U_LARB0_ID, 11) +#define M4U_PORT_APU_READ MTK_M4U_UNMANAGED_ID(M4U_LARB0_ID, 10) +#define M4U_PORT_APU_WRITE MTK_M4U_UNMANAGED_ID(M4U_LARB0_ID, 11)/* larb1 */ #define M4U_PORT_VENC_RCPU MTK_M4U_ID(M4U_LARB1_ID, 0)
Signature · 1 line
2.38.2
Re: [PATCH 3/3] dt-bindings: iommu: memory: Use unmanaged iommu domain for the APU
Quoted 4 lines · Alexandre Bailon
This updates the iommu id to use unmanaged iommu domain for the APU. This is required by remoteproc to use the iommu.
Signed-off-by Alexandre Bailon <[email protected]>
Rob Herring
maintainerRe: [PATCH 3/3] dt-bindings: iommu: memory: Use unmanaged iommu domain for the APU
In reply to Alexandre BailonQuoted 2 lines · Alexandre Bailon
This updates the iommu id to use unmanaged iommu domain for the APU. This is required by remoteproc to use the iommu.
Explain how a mixture of DTs with or without this value changed would work with kernels with or without support for unmanaged domains? Looks like a compatibility problem to me.
Quoted 24 lines
Signed-off-by Alexandre Bailon <[email protected]>--- include/dt-bindings/memory/mediatek,mt8365-larb-port.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)include/dt-bindings/memory/mediatek,mt8365-larb-port.h +2
-2@@ -24,8 +24,8 @@#define M4U_PORT_MDP_WROT0 MTK_M4U_ID(M4U_LARB0_ID, 7)#define M4U_PORT_MDP_RDMA1 MTK_M4U_ID(M4U_LARB0_ID, 8)#define M4U_PORT_DISP_FAKE0 MTK_M4U_ID(M4U_LARB0_ID, 9) -#define M4U_PORT_APU_READ MTK_M4U_ID(M4U_LARB0_ID, 10) -#define M4U_PORT_APU_WRITE MTK_M4U_ID(M4U_LARB0_ID, 11) +#define M4U_PORT_APU_READ MTK_M4U_UNMANAGED_ID(M4U_LARB0_ID, 10) +#define M4U_PORT_APU_WRITE MTK_M4U_UNMANAGED_ID(M4U_LARB0_ID, 11)/* larb1 */ #define M4U_PORT_VENC_RCPU MTK_M4U_ID(M4U_LARB1_ID, 0)Signature · 1 line
2.38.2