drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
Subsystems (2)
PATCH 1/1 drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset.
The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their INIT_OTP sequence, but the deassert must be done before calling intel_dsi_device_ready(), so that is too late.
Simply doing the INIT_OTP sequence earlier is not enough to fix this, because the INIT_OTP sequence also sends various MIPI packets to the panel, which can only happen after calling intel_dsi_device_ready().
This commit fixes this by making mipi_exec_send_packet() call intel_dsi_device_ready() if not done already, so that we can call the INIT_OTP sequence earlier on affected devices.
Note that this only changes the init-sequence on devices for which intel_dsi_use_init_otp_as_deassert() returns true, on other devices intel_dsi->device_ready will be set to true before calling any MIPI sequences which may send packets, so the check added to mipi_exec_send_packet() is a nop there.
Related: https://bugs.freedesktop.org/show_bug.cgi?id=101205
--- drivers/gpu/drm/i915/intel_dsi.c | 53 ++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dsi.h | 4 +++ drivers/gpu/drm/i915/intel_dsi_vbt.c | 6 ++++ 3 files changed, 60 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_dsi.c +50 -3
@@ -539,9 +539,14 @@ static void vlv_dsi_device_ready(struct intel_encoder *encoder) } } -static void intel_dsi_device_ready (struct intel_encoder *encoder) +void intel_dsi_device_ready (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); + +/* Already done? */ +if (intel_dsi->device_ready) +return ;if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv))vlv_dsi_device_ready (encoder);
@@ -549,6 +554,8 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)bxt_dsi_device_ready (encoder); else if (IS_GEMINILAKE(dev_priv)) glk_dsi_device_ready(encoder); + + intel_dsi->device_ready = true; }static void glk_dsi_enter_low_power_mode (struct intel_encoder *encoder)
@@ -786,6 +793,36 @@ static void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)* - wait t4 - wait t4 */ +/* +* Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. +* The deassert must be done before calling intel_dsi_device_ready, while +* intel_dsi_device_ready() must be called before any send packet ops inside +* the init OTP sequence. mipi_exec_send_packet() deals with calling +* intel_dsi_device_ready() if necessary. This function checks if we need +* to call init OTP at deassert time. +*/ +static bool intel_dsi_use_init_otp_as_deassert (struct intel_dsi *intel_dsi) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_dsi->base.base.dev); + +/* Limit this to VLV for now. */ +if (!IS_VALLEYVIEW (dev_priv)) +return false; + +/* Limit this to v1 vid-mode sequences */ +if (!is_vid_mode (intel_dsi) || dev_priv->vbt.dsi.seq_version !=1 ) +return false; + +/* If there is an assert-reset seq and no deassert one, use init OTP */ +if (dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET ] !=0 && + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ] ==0 ) { +DRM_DEBUG_KMS ("Using init OTP to deassert reset\n" ); +return true; + } + +return false; +} +static void intel_dsi_pre_enable (struct intel_encoder *encoder,const struct intel_crtc_state *pipe_config,const struct drm_connector_state *conn_state)
@@ -840,7 +877,10 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay);/* Deassert reset */ -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); +if (intel_dsi_use_init_otp_as_deassert (intel_dsi)) +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP ); +else +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);
@@ -858,7 +898,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,intel_dsi_prepare (encoder, pipe_config);/* Send initialization commands in LP mode */ -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP ); +if (!intel_dsi_use_init_otp_as_deassert (intel_dsi)) +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP );/* Enable port in pre-enable phase itself because as per hw team * recommendation, port should be enabled befor plane & pipe */
@@ -925,12 +966,15 @@ static void intel_dsi_disable(struct intel_encoder *encoder,static void intel_dsi_clear_device_ready (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base);if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv) ||IS_BROXTON (dev_priv))vlv_dsi_clear_device_ready (encoder);else if (IS_GEMINILAKE (dev_priv))glk_dsi_clear_device_ready (encoder); + + intel_dsi->device_ready = false; } static void intel_dsi_post_disable(struct intel_encoder *encoder,
@@ -944,6 +988,9 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,DRM_DEBUG_KMS ("\n" ); +/* in case the dsi panel is on when the i915 driver gets loaded */ + intel_dsi->device_ready = true; +if (is_vid_mode (intel_dsi)) {for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port);
drivers/gpu/drm/i915/intel_dsi.h +4 -0
@@ -46,6 +46,9 @@ struct intel_dsi {struct intel_connector *attached_connector; +/* Have we put the device in ready state (LP-11) ? */ +bool device_ready; +/* bit mask of ports being driven */ u16 ports;
@@ -132,6 +135,7 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)/* intel_dsi.c */ void wait_for_dsi_fifo_empty (struct intel_dsi *intel_dsi,enum port port);enum mipi_dsi_pixel_format pixel_format_from_register_bits (u32 fmt); +void intel_dsi_device_ready (struct intel_encoder *encoder);/* intel_dsi_pll.c */ bool intel_dsi_pll_is_enabled (struct drm_i915_private *dev_priv);
drivers/gpu/drm/i915/intel_dsi_vbt.c +6 -0
@@ -118,6 +118,12 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,DRM_DEBUG_KMS ("\n" ); +/* Make sure the device is in ready state (LP-11) */ +if (!intel_dsi->device_ready) { +intel_dsi_device_ready (&intel_dsi->base); +usleep_range (10000 ,20000 ); + } + flags = *data++; type = *data++;
Signature · 6 lines
2.14.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 18 lines · Hans de Goede
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset.
The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their
INIT_OTPsequence, but the deassert must be done before callingintel_dsi_device_ready(), so that is too late.Simply doing the
INIT_OTPsequence earlier is not enough to fix this, because theINIT_OTPsequence also sends various MIPI packets to the panel, which can only happen after callingintel_dsi_device_ready().This commit fixes this by making
mipi_exec_send_packet()callintel_dsi_device_ready()if not done already, so that we can call theINIT_OTPsequence earlier on affected devices.
Quoted 5 lines
Note that this only changes the init-sequence on devices for which
intel_dsi_use_init_otp_as_deassert()returns true, on other devicesintel_dsi->device_readywill be set to true before calling any MIPI sequences which may send packets, so the check added tomipi_exec_send_packet()is a nop there.
I don't like how wide this kludge spreads in the code.
Could we instead just extract the deassert sequence from the OTP sequence? Looks like your code already assumes that everything up to the first DSI packet is part of the deassert sequence. So I imagine it should be pretty easy to split the sequence up at that same point?
Quoted 167 lines
Related: https://bugs.freedesktop.org/show_bug.cgi?id=101205
Reported-by Jan-Michael Brummer <[email protected]>Tested-by Hans de Goede <[email protected]>Signed-off-by Hans de Goede <[email protected]>--- drivers/gpu/drm/i915/intel_dsi.c | 53 ++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dsi.h | 4 +++ drivers/gpu/drm/i915/intel_dsi_vbt.c | 6 ++++ 3 files changed, 60 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_dsi.c +50
-3@@ -539,9 +539,14 @@ static void vlv_dsi_device_ready(struct intel_encoder *encoder) } } -static void intel_dsi_device_ready (struct intel_encoder *encoder) +void intel_dsi_device_ready (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); + +/* Already done? */ +if (intel_dsi->device_ready) +return ;if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv))vlv_dsi_device_ready (encoder);@@ -549,6 +554,8 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)bxt_dsi_device_ready (encoder); else if (IS_GEMINILAKE(dev_priv)) glk_dsi_device_ready(encoder); + + intel_dsi->device_ready = true; }static void glk_dsi_enter_low_power_mode (struct intel_encoder *encoder)@@ -786,6 +793,36 @@ static void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)* - wait t4 - wait t4 */ +/* +* Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. +* The deassert must be done before calling intel_dsi_device_ready, while +* intel_dsi_device_ready() must be called before any send packet ops inside +* the init OTP sequence. mipi_exec_send_packet() deals with calling +* intel_dsi_device_ready() if necessary. This function checks if we need +* to call init OTP at deassert time. +*/ +static bool intel_dsi_use_init_otp_as_deassert (struct intel_dsi *intel_dsi) +{ +struct drm_i915_private *dev_priv =to_i915 (intel_dsi->base.base.dev); + +/* Limit this to VLV for now. */ +if (!IS_VALLEYVIEW (dev_priv)) +return false; + +/* Limit this to v1 vid-mode sequences */ +if (!is_vid_mode (intel_dsi) || dev_priv->vbt.dsi.seq_version !=1 ) +return false; + +/* If there is an assert-reset seq and no deassert one, use init OTP */ +if (dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET ] !=0 && + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET ] ==0 ) { +DRM_DEBUG_KMS ("Using init OTP to deassert reset\n" ); +return true; + } + +return false; +} +static void intel_dsi_pre_enable (struct intel_encoder *encoder,const struct intel_crtc_state *pipe_config,const struct drm_connector_state *conn_state)@@ -840,7 +877,10 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,intel_dsi_msleep (intel_dsi, intel_dsi->panel_on_delay);/* Deassert reset */ -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET ); +if (intel_dsi_use_init_otp_as_deassert (intel_dsi)) +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP ); +else +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_DEASSERT_RESET );if (IS_GEMINILAKE (dev_priv)) { glk_cold_boot =glk_dsi_enable_io (encoder);@@ -858,7 +898,8 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder,intel_dsi_prepare (encoder, pipe_config);/* Send initialization commands in LP mode */ -intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP ); +if (!intel_dsi_use_init_otp_as_deassert (intel_dsi)) +intel_dsi_vbt_exec_sequence (intel_dsi,MIPI_SEQ_INIT_OTP );/* Enable port in pre-enable phase itself because as per hw team * recommendation, port should be enabled befor plane & pipe */ @@ -925,12 +966,15 @@ static void intel_dsi_disable(struct intel_encoder *encoder,static void intel_dsi_clear_device_ready (struct intel_encoder *encoder) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base);if (IS_VALLEYVIEW (dev_priv) ||IS_CHERRYVIEW (dev_priv) ||IS_BROXTON (dev_priv))vlv_dsi_clear_device_ready (encoder);else if (IS_GEMINILAKE (dev_priv))glk_dsi_clear_device_ready (encoder); + + intel_dsi->device_ready = false; } static void intel_dsi_post_disable(struct intel_encoder *encoder,@@ -944,6 +988,9 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder,DRM_DEBUG_KMS ("\n" ); +/* in case the dsi panel is on when the i915 driver gets loaded */ + intel_dsi->device_ready = true; +if (is_vid_mode (intel_dsi)) {for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port);drivers/gpu/drm/i915/intel_dsi.h +4
-0@@ -46,6 +46,9 @@ struct intel_dsi {struct intel_connector *attached_connector; +/* Have we put the device in ready state (LP-11) ? */ +bool device_ready; +/* bit mask of ports being driven */ u16 ports;@@ -132,6 +135,7 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)/* intel_dsi.c */ void wait_for_dsi_fifo_empty (struct intel_dsi *intel_dsi,enum port port);enum mipi_dsi_pixel_format pixel_format_from_register_bits (u32 fmt); +void intel_dsi_device_ready (struct intel_encoder *encoder);/* intel_dsi_pll.c */ bool intel_dsi_pll_is_enabled (struct drm_i915_private *dev_priv);drivers/gpu/drm/i915/intel_dsi_vbt.c +6
-0@@ -118,6 +118,12 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,DRM_DEBUG_KMS ("\n" ); +/* Make sure the device is in ready state (LP-11) */ +if (!intel_dsi->device_ready) { +intel_dsi_device_ready (&intel_dsi->base); +usleep_range (10000 ,20000 ); + } + flags = *data++; type = *data++;Signature · 1 line
2.14.3
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi,
Quoted 25 lines · Ville Syrjälä
Quoted 18 lines · Hans de Goede
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset.
The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their
INIT_OTPsequence, but the deassert must be done before callingintel_dsi_device_ready(), so that is too late.Simply doing the
INIT_OTPsequence earlier is not enough to fix this, because theINIT_OTPsequence also sends various MIPI packets to the panel, which can only happen after callingintel_dsi_device_ready().This commit fixes this by making
mipi_exec_send_packet()callintel_dsi_device_ready()if not done already, so that we can call theINIT_OTPsequence earlier on affected devices.Quoted 5 lines
Note that this only changes the init-sequence on devices for which
intel_dsi_use_init_otp_as_deassert()returns true, on other devicesintel_dsi->device_readywill be set to true before calling any MIPI sequences which may send packets, so the check added tomipi_exec_send_packet()is a nop there.
Quoted 7 lines
I don't like how wide this kludge spreads in the code.
Could we instead just extract the deassert sequence from the OTP sequence? Looks like your code already assumes that everything up to the first DSI packet is part of the deassert sequence. So I imagine it should be pretty easy to split the sequence up at that same point?
Good idea, I've implemented this it results in slightly more code, but is a lot cleaner indeed.
v2 with this new approach is coming up...
Regards,
Hans
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
In reply to Hans de Goede== Series Details ==
== Series Details ==
Series: drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
URL : https://patchwork.freedesktop.org/series/37105/
State : success
== Summary ==
Series 37105v1 drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
https://patchwork.freedesktop.org/api/1.0/series/37105/revisions/1/mbox/
Test debugfs_test:
Subgroup read_all_entries:
pass -> INCOMPLETE (fi-snb-2520m) fdo#103713fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:428s fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:428s fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:374s fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:483s fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:281s fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:479s fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:483s fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:467s fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:455s fi-elk-e7500 total:224 pass:168 dwarn:10 dfail:0 fail:0 skip:45 fi-gdg-551 total:288 pass:179 dwarn:0 dfail:0 fail:1 skip:108 time:278s fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:513s fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:390s fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:399s fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:412s fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:454s fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:420s fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:457s fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:499s fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:452s fi-kbl-r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:504s fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:578s fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:430s fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:510s fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:531s fi-skl-6700k2 total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:484s fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:480s fi-skl-guc total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:419s fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:429s fi-snb-2520m total:3 pass:2 dwarn:0 dfail:0 fail:0 skip:0 fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:400s Blacklisted hosts: fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:558s fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:472s
9d8467fe5626095314bc34449457798dae066fbb drm-tip: 2018y-01m-24d-19h-59m-41s UTC integration manifest 5178f7cd2768 drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7778/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: failure for drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
In reply to Hans de Goede== Series Details ==
== Series Details ==
Series: drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence
URL : https://patchwork.freedesktop.org/series/37105/
State : failure
== Summary ==
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-primscrn-pri-indfb-draw-mmap-gtt:
pass -> FAIL (shard-apl) fdo#101623 +1
Test kms_sysfs_edid_timing:
pass -> WARN (shard-apl) fdo#100047
Test kms_flip:
Subgroup plain-flip-fb-recreate-interruptible:
fail -> PASS (shard-hsw) fdo#100368 +1
Subgroup 2x-flip-vs-modeset-interruptible:
dmesg-warn -> PASS (shard-hsw) fdo#102614
Test kms_universal_plane:
Subgroup universal-plane-pipe-b-functional:
pass -> FAIL (shard-apl)
Test perf:
Subgroup buffer-fill:
pass -> FAIL (shard-apl) fdo#103755fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#102614 https://bugs.freedesktop.org/show_bug.cgi?id=102614
fdo#103755 https://bugs.freedesktop.org/show_bug.cgi?id=103755
shard-apl total:2838 pass:1747 dwarn:1 dfail:0 fail:27 skip:1062 time:12614s shard-hsw total:2838 pass:1734 dwarn:1 dfail:0 fail:12 skip:1090 time:11904s shard-snb total:2838 pass:1330 dwarn:1 dfail:0 fail:10 skip:1497 time:6614s
Blacklisted hosts:
shard-kbl total:2820 pass:1856 dwarn:1 dfail:0 fail:23 skip:939 time:9417s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7778/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx