platform/x86: touchscreen_dmi: Add info for the Jumper EZpad 7 tablet
Subsystems (2)
PATCH 1/1 platform/x86: touchscreen_dmi: Add info for the Jumper EZpad 7 tablet
Add touchscreen info for the Jumper EZpad 7 tablet.
Signed-off-by Hans de Goede <[email protected]>
--- drivers/platform/x86/touchscreen_dmi.c | 27 ++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
drivers/platform/x86/touchscreen_dmi.c +27 -0
@@ -382,6 +382,23 @@ static const struct ts_dmi_data jumper_ezpad_6_m4_data = { .properties = jumper_ezpad_6_m4_props, }; +static const struct property_entry jumper_ezpad_7_props[] = { +PROPERTY_ENTRY_U32 ("touchscreen-min-x" ,4 ), +PROPERTY_ENTRY_U32 ("touchscreen-min-y" ,10 ), +PROPERTY_ENTRY_U32 ("touchscreen-size-x" ,2044 ), +PROPERTY_ENTRY_U32 ("touchscreen-size-y" ,1526 ), +PROPERTY_ENTRY_BOOL ("touchscreen-swapped-x-y" ), +PROPERTY_ENTRY_STRING ("firmware-name" ,"gsl3680-jumper-ezpad-7.fw" ), +PROPERTY_ENTRY_U32 ("silead,max-fingers" ,10 ), +PROPERTY_ENTRY_BOOL ("silead,stuck-controller-bug" ), + { } +}; + +static const struct ts_dmi_data jumper_ezpad_7_data = { + .acpi_name ="MSSL1680:00" , + .properties = jumper_ezpad_7_props, +}; +static const struct property_entry jumper_ezpad_mini3_props[] = {PROPERTY_ENTRY_U32 ("touchscreen-min-x" ,23 ),PROPERTY_ENTRY_U32 ("touchscreen-min-y" ,16 ),
@@ -1034,6 +1051,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BIOS_VERSION, "Jumper8.S106x"), }, }, + { +/* Jumper EZpad 7 */ + .driver_data = (void *)&jumper_ezpad_7_data, + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Jumper" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"EZpad" ), +/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ + DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), + }, + }, {/* Jumper EZpad mini3 */ .driver_data = (void *)&jumper_ezpad_mini3_data,
Signature · 1 line
2.29.2
Hi all,
Quoted 3 lines · Hans de Goede
Add touchscreen info for the Jumper EZpad 7 tablet.
Signed-off-by Hans de Goede <[email protected]>
I've added this to my review-hans branch now, so this should show up in for-next soon-ish.
Regards,
Hans
Quoted 50 lines
--- drivers/platform/x86/touchscreen_dmi.c | 27 ++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)drivers/platform/x86/touchscreen_dmi.c +27
-0@@ -382,6 +382,23 @@ static const struct ts_dmi_data jumper_ezpad_6_m4_data = { .properties = jumper_ezpad_6_m4_props, }; +static const struct property_entry jumper_ezpad_7_props[] = { +PROPERTY_ENTRY_U32 ("touchscreen-min-x" ,4 ), +PROPERTY_ENTRY_U32 ("touchscreen-min-y" ,10 ), +PROPERTY_ENTRY_U32 ("touchscreen-size-x" ,2044 ), +PROPERTY_ENTRY_U32 ("touchscreen-size-y" ,1526 ), +PROPERTY_ENTRY_BOOL ("touchscreen-swapped-x-y" ), +PROPERTY_ENTRY_STRING ("firmware-name" ,"gsl3680-jumper-ezpad-7.fw" ), +PROPERTY_ENTRY_U32 ("silead,max-fingers" ,10 ), +PROPERTY_ENTRY_BOOL ("silead,stuck-controller-bug" ), + { } +}; + +static const struct ts_dmi_data jumper_ezpad_7_data = { + .acpi_name ="MSSL1680:00" , + .properties = jumper_ezpad_7_props, +}; +static const struct property_entry jumper_ezpad_mini3_props[] = {PROPERTY_ENTRY_U32 ("touchscreen-min-x" ,23 ),PROPERTY_ENTRY_U32 ("touchscreen-min-y" ,16 ),@@ -1034,6 +1051,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BIOS_VERSION, "Jumper8.S106x"), }, }, + { +/* Jumper EZpad 7 */ + .driver_data = (void *)&jumper_ezpad_7_data, + .matches = { +DMI_MATCH (DMI_SYS_VENDOR ,"Jumper" ), +DMI_MATCH (DMI_PRODUCT_NAME ,"EZpad" ), +/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ + DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), + }, + }, {/* Jumper EZpad mini3 */ .driver_data = (void *)&jumper_ezpad_mini3_data,