ARM/arm64: dts: rcar: Add SYSC PM domains
Subsystems (2)
Geert Uytterhoeven
maintainerv5 cover ARM/arm64: dts: rcar: Add SYSC PM domains
Hi Simon, Magnus,
This patch series adds the R-Car System Controller to the DTS files for the various Renesas R-Car SoCs, and hooks up devices to their respective PM domains.
This is a dependency for the enablement of DU and VSP on R-Car H3, as on this SoC the VSPs are located in a PM Domain.
This series contains 2 parts:
1. Patches 1-6 add device node for the System Controllers, and hook up CPU cores and L2 caches/SCUs to their respective PM Domains,
2. Patches 7-12 hook up devices to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
As "[PATCH v5 00/11] soc: renesas: Add R-Car SYSC PM Domain Support" merged the two initialization phases again, the issues in v4 caused by excessive deferred probing are gone, and both parts are now safe to apply.
Changes compared to v4:
- Add Acked-by,
- Remove "power-domains" property again from the sysc nodes, as the System Controller theirselves are not part of the Clock Domains.
Changes compared to v3:
- Add power-domains properties to the sysc nodes, to refer to the SoC's Clock Domains,
- Extract using the SYSC "always-on" PM Domain on R-Car H3 into its own patch,
- Add patches to use the SYSC "always-on" PM Domain on R-Car H1 and
R-Car Gen2,
- Update for recently added can0, can1, pciec0, and pciec1 device nodes on R-Car H3.
Changes compared to v2:
- Move power area hierarchy from DT to C (cfr. DT bindings for Renesas CPG/MSSR), and switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings, as the bindings are SoC-specific,
- Add an "always-on" power area on R-Car H3.
Changes compared to v1:
- Add R-Car H3 (r8a7795) support,
- Use "renesas,<type>-sysc" instead of "renesas,sysc-<type>",
- Add fallback compatibility strings for R-Car Gen2 and Gen3.
Dependencies:
- renesas-devel-20160411-v4.6-rc3
- clk-renesas-for-v4.7
- "[PATCH v2 0/4] clk: renesas: R-Car SYSC PM Domain Preparation",
- "[PATCH v5 0/7] PM / Domains: Add DT bindings for the R-Car System Controller",
- "[PATCH v5 00/11] soc: renesas: Add R-Car SYSC PM Domain Support".
Note that these are hard dependencies: adding SYSC PM Domains to DTS files without driver support will cause breakage!
For your convenience, I've pushed this, incl. all dependencies, to the topic/rcar-sysc-pd-v5 branch ofgit://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.
Integration with renesas-drivers-2016-04-12-v4.6-rc3 is available in the topic/gen3-latest branch.
This has been tested on r8a7779/marzen, r8a7790/lager, r8a7791/koelsch, r8a7794/alt, and r8a7795/salvator-x.
Thanks for applying!
Geert Uytterhoeven (12):
ARM: dts: r8a7779: Add SYSC PM Domains
ARM: dts: r8a7790: Add SYSC PM Domains
ARM: dts: r8a7791: Add SYSC PM Domains
ARM: dts: r8a7793: Add SYSC PM Domains
ARM: dts: r8a7794: Add SYSC PM Domains
arm64: dts: r8a7795: Add SYSC PM Domains
ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
arm64: dts: r8a7795: Use SYSC "always-on" PM Domain
arch/arm/boot/dts/r8a7779.dtsi | 54 ++++++----- arch/arm/boot/dts/r8a7790.dtsi | 155 ++++++++++++++++-------------- arch/arm/boot/dts/r8a7791.dtsi | 156 ++++++++++++++++--------------- arch/arm/boot/dts/r8a7793.dtsi | 105 +++++++++++---------- arch/arm/boot/dts/r8a7794.dtsi | 116 ++++++++++++----------- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 123 +++++++++++++----------- 6 files changed, 389 insertions(+), 320 deletions(-)
Signature · 12 lines
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsGeert Uytterhoeven
maintainerPATCH v5 1/12 ARM: dts: r8a7779: Add SYSC PM Domains
Add a device node for the System Controller. Hook up ARM CPU cores 1-3 to their respective PM Domains. Note that ARM CPU core 0 cannot be shut off.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
v2:
- Correct sysc "reg" property (#address/size-cells = 1, not 2),
- Change one-line summary prefix to match current arm-soc practices,
- Update compatible values.
--- arch/arm/boot/dts/r8a7779.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7779.dtsi +10 -0
@@ -14,6 +14,7 @@ #include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7779-sysc.h> / { compatible = "renesas,r8a7779";
@@ -34,18 +35,21 @@ compatible = "arm,cortex-a9"; reg = <1>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM1>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7779_PD_ARM3>; }; };
@@ -586,4 +590,10 @@ "mmc1", "mmc0"; }; }; + + sysc: system-controller@ffd85000 { + compatible = "renesas,r8a7779-sysc"; + reg = <0xffd85000 0x0200>; + #power-domain-cells = <1>; + }; };
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 2/12 ARM: dts: r8a7790: Add SYSC PM Domains
In reply to Geert UytterhoevenAdd a device node for the System Controller.
Hook up the Cortex-A15 and Cortex-A7 CPU cores and L2 caches/SCUs to their respective PM Domains.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings,
v2:
- Change one-line summary prefix to match current arm-soc practices,
- Update compatible values.
--- arch/arm/boot/dts/r8a7790.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/arm/boot/dts/r8a7790.dtsi +17 -0
@@ -13,6 +13,7 @@ #include <dt-bindings/clock/r8a7790-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7790-sysc.h> / { compatible = "renesas,r8a7790";
@@ -52,6 +53,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7790_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */
@@ -68,6 +70,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; };
@@ -76,6 +79,7 @@ compatible = "arm,cortex-a15"; reg = <2>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; };
@@ -84,6 +88,7 @@ compatible = "arm,cortex-a15"; reg = <3>; clock-frequency = <1300000000>; + power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; };
@@ -92,6 +97,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; };
@@ -100,6 +106,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; };
@@ -108,6 +115,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU2>; next-level-cache = <&L2_CA7>; };
@@ -116,6 +124,7 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <780000000>; + power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; }; };
@@ -141,12 +150,14 @@ L2_CA15: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7790_PD_CA15_SCU>; cache-unified; cache-level = <2>; }; L2_CA7: cache-controller@1 { compatible = "cache"; + power-domains = <&sysc R8A7790_PD_CA7_SCU>; cache-unified; cache-level = <2>; };
@@ -1471,6 +1482,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7790-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 3/12 ARM: dts: r8a7791: Add SYSC PM Domains
In reply to Geert UytterhoevenAdd a device node for the System Controller.
Hook up the Cortex-A15 CPU cores and the Cortex-A15 L2 cache/SCU to their respective PM Domains.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings,
v2:
- Change one-line summary prefix to match current arm-soc practices,
- Update compatible values.
--- arch/arm/boot/dts/r8a7791.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7791.dtsi +10 -0
@@ -13,6 +13,7 @@ #include <dt-bindings/clock/r8a7791-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7791-sysc.h> / { compatible = "renesas,r8a7791";
@@ -51,6 +52,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7791_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; /* kHz - uV - OPPs unknown yet */
@@ -67,6 +69,7 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1500000000>; + power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; };
@@ -92,6 +95,7 @@ L2_CA15: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; cache-unified; cache-level = <2>; };
@@ -1491,6 +1495,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 4/12 ARM: dts: r8a7793: Add SYSC PM Domains
In reply to Geert UytterhoevenAdd a device node for the System Controller.
Hook up the first Cortex-A15 CPU core and the Cortex-A15 L2 cache/SCU to their respective PM Domains.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings,
v2:
- Change one-line summary prefix to match current arm-soc practices,
- Update compatible values.
--- arch/arm/boot/dts/r8a7793.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/r8a7793.dtsi +9 -0
@@ -11,6 +11,7 @@ #include <dt-bindings/clock/r8a7793-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7793-sysc.h> / { compatible = "renesas,r8a7793";
@@ -43,6 +44,7 @@ voltage-tolerance = <1>; /* 1% */ clocks = <&cpg_clocks R8A7793_CLK_Z>; clock-latency = <300000>; /* 300 us */ + power-domains = <&sysc R8A7793_PD_CA15_CPU0>; /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>,
@@ -76,6 +78,7 @@ L2_CA15: cache-controller at 0 { compatible = "cache"; + power-domains = <&sysc R8A7793_PD_CA15_SCU>; cache-unified; cache-level = <2>; };
@@ -1212,6 +1215,12 @@ }; }; + sysc: system-controller at e6180000 { + compatible = "renesas,r8a7793-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + ipmmu_sy0: mmu at e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 5/12 ARM: dts: r8a7794: Add SYSC PM Domains
In reply to Geert UytterhoevenAdd a device node for the System Controller.
Hook up the Cortex-A7 CPU cores and the Cortex-A7 L2 cache/SCU to their respective PM Domains.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings,
v2:
- Change one-line summary prefix to match current arm-soc practices,
- Update compatible values.
--- arch/arm/boot/dts/r8a7794.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/r8a7794.dtsi +10 -0
@@ -12,6 +12,7 @@ #include <dt-bindings/clock/r8a7794-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/r8a7794-sysc.h> / { compatible = "renesas,r8a7794";
@@ -42,6 +43,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7794_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; };
@@ -50,12 +52,14 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; }; L2_CA7: cache-controller@1 { compatible = "cache"; + power-domains = <&sysc R8A7794_PD_CA7_SCU>; cache-unified; cache-level = <2>; };
@@ -1244,6 +1248,12 @@ }; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7794-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + ipmmu_sy0: mmu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 6/12 arm64: dts: r8a7795: Add SYSC PM Domains
In reply to Geert UytterhoevenAdd a device node for the System Controller.
Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2 caches/SCUs to their respective PM Domains.
---
v5:
- Remove "power-domains" property again from the sysc node, as the System Controller itself is not part of the Clock Domain,
v4:
- Add "power-domains" property to the sysc node, to refer to the SoC's Clock Domain,
- Extract using "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on power area into a separate patch,
v3:
- Drop power area hiearchy from DT,
- Switch to "#power-domain-cells = <1>",
- Use "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on power area,
- Drop fallback compatibility strings,
v2:
- New.
--- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +13 -0
@@ -10,6 +10,7 @@ #include <dt-bindings/clock/r8a7795-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a7795-sysc.h> / { compatible = "renesas,r8a7795";
@@ -39,6 +40,7 @@ compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; };
@@ -47,6 +49,7 @@ compatible = "arm,cortex-a57","arm,armv8"; reg = <0x1>; device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; };
@@ -54,6 +57,7 @@ compatible = "arm,cortex-a57","arm,armv8"; reg = <0x2>; device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; };
@@ -61,6 +65,7 @@ compatible = "arm,cortex-a57","arm,armv8"; reg = <0x3>; device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; };
@@ -68,12 +73,14 @@ L2_CA57: cache-controller@0 { compatible = "cache"; + power-domains = <&sysc R8A7795_PD_CA57_SCU>; cache-unified; cache-level = <2>; }; L2_CA53: cache-controller@1 { compatible = "cache"; + power-domains = <&sysc R8A7795_PD_CA53_SCU>; cache-unified; cache-level = <2>; };
@@ -305,6 +312,12 @@ #power-domain-cells = <0>; }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7795-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + audma0: dma-controller@ec700000 { compatible = "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>;
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 7/12 ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
In reply to Geert UytterhoevenHook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New.
--- arch/arm/boot/dts/r8a7779.dtsi | 44 +++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 22 deletions(-)
arch/arm/boot/dts/r8a7779.dtsi +22 -22
@@ -177,7 +177,7 @@ reg = <0xffc70000 0x1000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -188,7 +188,7 @@ reg = <0xffc71000 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -199,7 +199,7 @@ reg = <0xffc72000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -210,7 +210,7 @@ reg = <0xffc73000 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -222,7 +222,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -234,7 +234,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -246,7 +246,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -258,7 +258,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -270,7 +270,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -282,7 +282,7 @@ clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -304,7 +304,7 @@ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>;
@@ -319,7 +319,7 @@ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>;
@@ -334,7 +334,7 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; #renesas,channels = <3>;
@@ -346,7 +346,7 @@ reg = <0xfc600000 0x2000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; }; sdhi0: sd@ffe4c000 {
@@ -354,7 +354,7 @@ reg = <0xffe4c000 0x100>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -363,7 +363,7 @@ reg = <0xffe4d000 0x100>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -372,7 +372,7 @@ reg = <0xffe4e000 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -381,7 +381,7 @@ reg = <0xffe4f000 0x100>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -392,7 +392,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -403,7 +403,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -414,7 +414,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; };
@@ -423,7 +423,7 @@ reg = <0 0xfff80000 0 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; ports {
Signature · 1 line
1.9.1
A message that is not in the archive (sent off-list or not yet received): 1460558692-10414-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org
PATCH v5 8/12 ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
Hook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New.
--- arch/arm/boot/dts/r8a7790.dtsi | 138 ++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 69 deletions(-)
arch/arm/boot/dts/r8a7790.dtsi +69 -69
@@ -184,7 +184,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 {
@@ -197,7 +197,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 {
@@ -210,7 +210,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 {
@@ -223,7 +223,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 {
@@ -236,7 +236,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 {
@@ -249,7 +249,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; thermal: thermal@e61f0000 {
@@ -259,7 +259,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; };
@@ -278,7 +278,7 @@ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>;
@@ -298,7 +298,7 @@ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>;
@@ -315,7 +315,7 @@ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 {
@@ -344,7 +344,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -375,7 +375,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -404,7 +404,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -433,7 +433,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -445,7 +445,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -457,7 +457,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -469,7 +469,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -481,7 +481,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -493,7 +493,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -505,7 +505,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -520,7 +520,7 @@ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -534,7 +534,7 @@ dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -548,7 +548,7 @@ dmas = <&dmac0 0x69>, <&dmac0 0x6a>, <&dmac1 0x69>, <&dmac1 0x6a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -562,7 +562,7 @@ dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -574,7 +574,7 @@ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>;
@@ -588,7 +588,7 @@ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, <&dmac1 0xe1>, <&dmac1 0xe2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>;
@@ -608,7 +608,7 @@ <&dmac0 0xcd>, <&dmac0 0xce>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <156000000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -621,7 +621,7 @@ <&dmac0 0xc9>, <&dmac0 0xca>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <156000000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -634,7 +634,7 @@ <&dmac0 0xc1>, <&dmac0 0xc2>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -647,7 +647,7 @@ <&dmac0 0xd3>, <&dmac0 0xd4>; dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -661,7 +661,7 @@ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -675,7 +675,7 @@ dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -689,7 +689,7 @@ dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -703,7 +703,7 @@ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -717,7 +717,7 @@ dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -731,7 +731,7 @@ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -746,7 +746,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -761,7 +761,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -776,7 +776,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -791,7 +791,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -806,7 +806,7 @@ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -815,7 +815,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>;
@@ -828,7 +828,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -839,7 +839,7 @@ reg = <0 0xee300000 0 0x2000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -848,7 +848,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -860,7 +860,7 @@ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb";
@@ -874,7 +874,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel@0 {
@@ -892,7 +892,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -901,7 +901,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -910,7 +910,7 @@ reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -919,7 +919,7 @@ reg = <0 0xe6ef3000 0 0x1000>; interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_VIN3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -928,7 +928,7 @@ reg = <0 0xfe920000 0 0x8000>; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-sru; renesas,#rpf = <5>;
@@ -941,7 +941,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lut; renesas,has-sru;
@@ -955,7 +955,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut;
@@ -969,7 +969,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut;
@@ -1024,7 +1024,7 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1035,7 +1035,7 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1044,7 +1044,7 @@ reg = <0 0xfe980000 0 0x10300>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_JPU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; }; clocks {
@@ -1496,7 +1496,7 @@ dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>;
@@ -1511,7 +1511,7 @@ dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1525,7 +1525,7 @@ dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1539,7 +1539,7 @@ dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1553,7 +1553,7 @@ dmas = <&dmac0 0x45>, <&dmac0 0x46>, <&dmac1 0x45>, <&dmac1 0x46>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1564,7 +1564,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled";
@@ -1577,7 +1577,7 @@ <0 0xee080000 0 0x1100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>;
@@ -1612,7 +1612,7 @@ <0 0xee0a0000 0 0x1100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>;
@@ -1630,7 +1630,7 @@ compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1683,7 +1683,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1726,7 +1726,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled";
Signature · 6 lines
1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v5 12/12 arm64: dts: r8a7795: Use SYSC "always-on" PM Domain
In reply to a message not in the archiveHook up all devices that are part of the CPG/MSSR Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New, extracted from "[PATCH v3] arm64: dts: r8a7795: Add SYSC PM Domains",
- Use "<&sysc R8A7795_PD_ALWAYS_ON>" for recently added can0, can1, pciec0, and pciec1 device nodes,
--- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 110 +++++++++++++++---------------- 1 file changed, 55 insertions(+), 55 deletions(-)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +55 -55
@@ -178,7 +178,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 912>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 {
@@ -192,7 +192,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 911>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 {
@@ -206,7 +206,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 910>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 {
@@ -220,7 +220,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 909>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 {
@@ -234,7 +234,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 908>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 {
@@ -248,7 +248,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 907>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 {
@@ -262,7 +262,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 906>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; gpio7: gpio@e6055800 {
@@ -276,7 +276,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&cpg CPG_MOD 905>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; pmu_a57 {
@@ -345,7 +345,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <16>; };
@@ -377,7 +377,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <16>; };
@@ -399,7 +399,7 @@ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 {
@@ -430,7 +430,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <16>; };
@@ -463,7 +463,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <16>; };
@@ -496,7 +496,7 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <16>; };
@@ -538,7 +538,7 @@ "ch20", "ch21", "ch22", "ch23", "ch24"; clocks = <&cpg CPG_MOD 812>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; phy-mode = "rgmii-id"; #address-cells = <1>; #size-cells = <0>;
@@ -555,7 +555,7 @@ clock-names = "clkp1", "clkp2", "can_clk"; assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -570,7 +570,7 @@ clock-names = "clkp1", "clkp2", "can_clk"; assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -586,7 +586,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -602,7 +602,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -618,7 +618,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -634,7 +634,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -650,7 +650,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -665,7 +665,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -680,7 +680,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -695,7 +695,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -710,7 +710,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -725,7 +725,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -740,7 +740,7 @@ clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -751,7 +751,7 @@ reg = <0 0xe6500000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -763,7 +763,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -775,7 +775,7 @@ reg = <0 0xe6510000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -787,7 +787,7 @@ reg = <0 0xe66d0000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -799,7 +799,7 @@ reg = <0 0xe66d8000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -811,7 +811,7 @@ reg = <0 0xe66e0000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -823,7 +823,7 @@ reg = <0 0xe66e8000 0 0x40>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -873,7 +873,7 @@ "src.1", "src.0", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; rcar_sound,dvc {
@@ -1007,7 +1007,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1016,7 +1016,7 @@ reg = <0 0xee040000 0 0xc00>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 327>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1028,7 +1028,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -1041,7 +1041,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -1051,7 +1051,7 @@ reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1060,7 +1060,7 @@ reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1069,7 +1069,7 @@ reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; cap-mmc-highspeed; status = "disabled"; };
@@ -1079,7 +1079,7 @@ reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; cap-mmc-highspeed; status = "disabled"; };
@@ -1089,7 +1089,7 @@ reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #phy-cells = <0>; status = "disabled"; };
@@ -1098,7 +1098,7 @@ compatible = "renesas,usb2-phy-r8a7795"; reg = <0 0xee0a0200 0 0x700>; clocks = <&cpg CPG_MOD 702>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #phy-cells = <0>; status = "disabled"; };
@@ -1107,7 +1107,7 @@ compatible = "renesas,usb2-phy-r8a7795"; reg = <0 0xee0c0200 0 0x700>; clocks = <&cpg CPG_MOD 701>; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; #phy-cells = <0>; status = "disabled"; };
@@ -1119,7 +1119,7 @@ clocks = <&cpg CPG_MOD 703>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1130,7 +1130,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1141,7 +1141,7 @@ clocks = <&cpg CPG_MOD 701>; phys = <&usb2_phy2>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1152,7 +1152,7 @@ clocks = <&cpg CPG_MOD 703>; phys = <&usb2_phy0>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1163,7 +1163,7 @@ clocks = <&cpg CPG_MOD 702>; phys = <&usb2_phy1>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1174,7 +1174,7 @@ clocks = <&cpg CPG_MOD 701>; phys = <&usb2_phy2>; phy-names = "usb"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; pciec0: pcie@fe000000 {
@@ -1198,7 +1198,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1223,7 +1223,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; };
Signature · 6 lines
1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Geert Uytterhoeven
maintainerPATCH v5 9/12 ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
In reply to Geert UytterhoevenHook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New.
--- arch/arm/boot/dts/r8a7791.dtsi | 146 ++++++++++++++++++++--------------------- 1 file changed, 73 insertions(+), 73 deletions(-)
arch/arm/boot/dts/r8a7791.dtsi +73 -73
@@ -122,7 +122,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio1: gpio at e6051000 {
@@ -135,7 +135,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio2: gpio at e6052000 {
@@ -148,7 +148,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio3: gpio at e6053000 {
@@ -161,7 +161,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio4: gpio at e6054000 {
@@ -174,7 +174,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio5: gpio at e6055000 {
@@ -187,7 +187,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio6: gpio at e6055400 {
@@ -200,7 +200,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; gpio7: gpio at e6055800 {
@@ -213,7 +213,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; thermal: thermal at e61f0000 {
@@ -223,7 +223,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; };
@@ -242,7 +242,7 @@ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>;
@@ -262,7 +262,7 @@ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>;
@@ -285,7 +285,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; dmac0: dma-controller at e6700000 {
@@ -314,7 +314,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -345,7 +345,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -374,7 +374,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -403,7 +403,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -415,7 +415,7 @@ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -427,7 +427,7 @@ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <2>; };
@@ -440,7 +440,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -452,7 +452,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -464,7 +464,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -476,7 +476,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -488,7 +488,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -501,7 +501,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -517,7 +517,7 @@ dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -531,7 +531,7 @@ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -545,7 +545,7 @@ dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -562,7 +562,7 @@ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>;
@@ -576,7 +576,7 @@ dmas = <&dmac1 0xcd>, <&dmac1 0xce>, <&dmac0 0xcd>, <&dmac0 0xce>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -588,7 +588,7 @@ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>, <&dmac0 0xc1>, <&dmac0 0xc2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -600,7 +600,7 @@ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>, <&dmac0 0xd3>, <&dmac0 0xd4>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -614,7 +614,7 @@ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -628,7 +628,7 @@ dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -642,7 +642,7 @@ dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -656,7 +656,7 @@ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -670,7 +670,7 @@ dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -684,7 +684,7 @@ dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -698,7 +698,7 @@ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -712,7 +712,7 @@ dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -726,7 +726,7 @@ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -741,7 +741,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -756,7 +756,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -771,7 +771,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -786,7 +786,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -801,7 +801,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -816,7 +816,7 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -831,7 +831,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -846,7 +846,7 @@ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -861,7 +861,7 @@ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -870,7 +870,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>;
@@ -883,7 +883,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -894,7 +894,7 @@ reg = <0 0xee300000 0 0x2000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -903,7 +903,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -915,7 +915,7 @@ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb";
@@ -929,7 +929,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel at 0 {
@@ -947,7 +947,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -956,7 +956,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -965,7 +965,7 @@ reg = <0 0xe6ef2000 0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_VIN2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -974,7 +974,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lut; renesas,has-sru;
@@ -988,7 +988,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut;
@@ -1002,7 +1002,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; renesas,has-lif; renesas,has-lut;
@@ -1048,7 +1048,7 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1059,7 +1059,7 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1068,7 +1068,7 @@ reg = <0 0xfe980000 0 0x10300>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_JPU>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; }; clocks {
@@ -1509,7 +1509,7 @@ dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>;
@@ -1524,7 +1524,7 @@ dmas = <&dmac0 0x51>, <&dmac0 0x52>, <&dmac1 0x51>, <&dmac1 0x52>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1538,7 +1538,7 @@ dmas = <&dmac0 0x55>, <&dmac0 0x56>, <&dmac1 0x55>, <&dmac1 0x56>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1552,7 +1552,7 @@ dmas = <&dmac0 0x41>, <&dmac0 0x42>, <&dmac1 0x41>, <&dmac1 0x42>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -1563,7 +1563,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled";
@@ -1576,7 +1576,7 @@ <0 0xee080000 0 0x1100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>;
@@ -1611,7 +1611,7 @@ <0 0xee0c0000 0 0x1100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>;
@@ -1661,7 +1661,7 @@ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1764,7 +1764,7 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled";
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 10/12 ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
In reply to Geert UytterhoevenHook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New.
--- arch/arm/boot/dts/r8a7793.dtsi | 96 +++++++++++++++++++++--------------------- 1 file changed, 48 insertions(+), 48 deletions(-)
arch/arm/boot/dts/r8a7793.dtsi +48 -48
@@ -105,7 +105,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 {
@@ -118,7 +118,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 {
@@ -131,7 +131,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 {
@@ -144,7 +144,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 {
@@ -157,7 +157,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 {
@@ -170,7 +170,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 {
@@ -183,7 +183,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; gpio7: gpio@e6055800 {
@@ -196,7 +196,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7793_CLK_GPIO7>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; thermal: thermal@e61f0000 {
@@ -206,7 +206,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #thermal-sensor-cells = <0>; };
@@ -225,7 +225,7 @@ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7793_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>;
@@ -245,7 +245,7 @@ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>;
@@ -268,7 +268,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7793_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; }; dmac0: dma-controller@e6700000 {
@@ -297,7 +297,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -328,7 +328,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -357,7 +357,7 @@ "ch12"; clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -386,7 +386,7 @@ "ch12"; clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; };
@@ -399,7 +399,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -411,7 +411,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -423,7 +423,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -435,7 +435,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -447,7 +447,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <6>; status = "disabled"; };
@@ -460,7 +460,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; i2c-scl-internal-delay-ns = <110>; status = "disabled"; };
@@ -476,7 +476,7 @@ dmas = <&dmac0 0x77>, <&dmac0 0x78>, <&dmac1 0x77>, <&dmac1 0x78>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -490,7 +490,7 @@ dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -504,7 +504,7 @@ dmas = <&dmac0 0x65>, <&dmac0 0x66>, <&dmac1 0x65>, <&dmac1 0x66>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -523,7 +523,7 @@ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -537,7 +537,7 @@ dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -551,7 +551,7 @@ dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -565,7 +565,7 @@ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -579,7 +579,7 @@ dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -593,7 +593,7 @@ dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -607,7 +607,7 @@ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -621,7 +621,7 @@ dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -635,7 +635,7 @@ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -650,7 +650,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -665,7 +665,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -680,7 +680,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -695,7 +695,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -710,7 +710,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -725,7 +725,7 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -740,7 +740,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -755,7 +755,7 @@ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -770,7 +770,7 @@ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -779,7 +779,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7793_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>;
@@ -794,7 +794,7 @@ dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>;
@@ -838,7 +838,7 @@ clocks = <&mstp9_clks R8A7793_CLK_RCAN0>, <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -849,7 +849,7 @@ clocks = <&mstp9_clks R8A7793_CLK_RCAN1>, <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; };
@@ -1316,7 +1316,7 @@ "src.4", "src.3", "src.2", "src.1", "src.0", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled";
Signature · 1 line
1.9.1
Geert Uytterhoeven
maintainerPATCH v5 11/12 ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
In reply to Geert UytterhoevenHook up all devices that are part of the CPG/MSTP Clock Domain to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.
---
v5:
- Add Acked-by,
v4:
- New.
--- arch/arm/boot/dts/r8a7794.dtsi | 106 ++++++++++++++++++++--------------------- 1 file changed, 53 insertions(+), 53 deletions(-)
arch/arm/boot/dts/r8a7794.dtsi +53 -53
@@ -86,7 +86,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio1: gpio@e6051000 {
@@ -99,7 +99,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio2: gpio@e6052000 {
@@ -112,7 +112,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio3: gpio@e6053000 {
@@ -125,7 +125,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio4: gpio@e6054000 {
@@ -138,7 +138,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio5: gpio@e6055000 {
@@ -151,7 +151,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; gpio6: gpio@e6055400 {
@@ -164,7 +164,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; cmt0: timer@ffca0000 {
@@ -174,7 +174,7 @@ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,channels-mask = <0x60>;
@@ -194,7 +194,7 @@ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,channels-mask = <0xff>;
@@ -225,7 +225,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; }; pfc: pin-controller@e6060000 {
@@ -259,7 +259,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -290,7 +290,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <15>; };
@@ -305,7 +305,7 @@ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -319,7 +319,7 @@ dmas = <&dmac0 0x25>, <&dmac0 0x26>, <&dmac1 0x25>, <&dmac1 0x26>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -333,7 +333,7 @@ dmas = <&dmac0 0x27>, <&dmac0 0x28>, <&dmac1 0x27>, <&dmac1 0x28>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -347,7 +347,7 @@ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, <&dmac1 0x1b>, <&dmac1 0x1c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -361,7 +361,7 @@ dmas = <&dmac0 0x1f>, <&dmac0 0x20>, <&dmac1 0x1f>, <&dmac1 0x20>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -375,7 +375,7 @@ dmas = <&dmac0 0x23>, <&dmac0 0x24>, <&dmac1 0x23>, <&dmac1 0x24>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -389,7 +389,7 @@ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, <&dmac1 0x3d>, <&dmac1 0x3e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -403,7 +403,7 @@ dmas = <&dmac0 0x19>, <&dmac0 0x1a>, <&dmac1 0x19>, <&dmac1 0x1a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -417,7 +417,7 @@ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, <&dmac1 0x1d>, <&dmac1 0x1e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -432,7 +432,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -447,7 +447,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -462,7 +462,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -477,7 +477,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -492,7 +492,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -507,7 +507,7 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -522,7 +522,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x3a>, <&dmac1 0x39>, <&dmac1 0x3a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -537,7 +537,7 @@ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, <&dmac1 0x4d>, <&dmac1 0x4e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -552,7 +552,7 @@ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, <&dmac1 0x3b>, <&dmac1 0x3c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -561,7 +561,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>;
@@ -574,7 +574,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -586,7 +586,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -598,7 +598,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -610,7 +610,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C2>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -622,7 +622,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C3>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -634,7 +634,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C4>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -646,7 +646,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_I2C5>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; i2c-scl-internal-delay-ns = <6>;
@@ -660,7 +660,7 @@ clocks = <&mstp3_clks R8A7794_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -673,7 +673,7 @@ clocks = <&mstp3_clks R8A7794_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; status = "disabled";
@@ -687,7 +687,7 @@ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; };
@@ -700,7 +700,7 @@ dmas = <&dmac1 0xcd>, <&dmac1 0xce>, <&dmac0 0xcd>, <&dmac0 0xce>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -712,7 +712,7 @@ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>, <&dmac0 0xc1>, <&dmac0 0xc2>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -724,7 +724,7 @@ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>, <&dmac0 0xd3>, <&dmac0 0xd4>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -736,7 +736,7 @@ dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>;
@@ -748,7 +748,7 @@ reg = <0 0xe6ef0000 0 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN0>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -757,7 +757,7 @@ reg = <0 0xe6ef1000 0 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_VIN1>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -768,7 +768,7 @@ <0 0xee080000 0 0x1100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; bus-range = <0 0>;
@@ -803,7 +803,7 @@ <0 0xee0c0000 0 0x1100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_EHCI>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; bus-range = <1 1>;
@@ -836,7 +836,7 @@ reg = <0 0xe6590000 0 0x100>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb";
@@ -850,7 +850,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; clock-names = "usbhs"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; usb0: usb-channel@0 {
@@ -898,7 +898,7 @@ clocks = <&mstp9_clks R8A7794_CLK_RCAN0>, <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
@@ -909,7 +909,7 @@ clocks = <&mstp9_clks R8A7794_CLK_RCAN1>, <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; };
Signature · 1 line
1.9.1
v5 cover ARM/arm64: dts: rcar: Add SYSC PM domains
In reply to Geert UytterhoevenHi Geert,
Thank you for the patches.
For the whole series,
Quoted 90 lines · On Wednesday 13 Apr 2016 16:44:40 Geert Uytterhoeven wrote:
Hi Simon, Magnus,
This patch series adds the R-Car System Controller to the DTS files for the various Renesas R-Car SoCs, and hooks up devices to their respective PM domains.
This is a dependency for the enablement of DU and VSP on R-Car H3, as on this SoC the VSPs are located in a PM Domain.
This series contains 2 parts:
1. Patches 1-6 add device node for the System Controllers, and hook up CPU cores and L2 caches/SCUs to their respective PM Domains,
2. Patches 7-12 hook up devices to the SYSC "always-on" PM Domain, for a more consistent device-power-area description in DT.As "[PATCH v5 00/11] soc: renesas: Add R-Car SYSC PM Domain Support" merged the two initialization phases again, the issues in v4 caused by excessive deferred probing are gone, and both parts are now safe to apply.
Changes compared to v4:
- Add Acked-by,
- Remove "power-domains" property again from the sysc nodes, as the System Controller theirselves are not part of the Clock Domains.Changes compared to v3:
- Add power-domains properties to the sysc nodes, to refer to the SoC's Clock Domains,
- Extract using the SYSC "always-on" PM Domain on R-Car H3 into its own patch,
- Add patches to use the SYSC "always-on" PM Domain on R-Car H1 andR-Car Gen2,- Update for recently added can0, can1, pciec0, and pciec1 device nodes on R-Car H3.
Changes compared to v2:
- Move power area hierarchy from DT to C (cfr. DT bindings for Renesas CPG/MSSR), and switch to "#power-domain-cells = <1>",
- Drop fallback compatibility strings, as the bindings are SoC-specific,
- Add an "always-on" power area on R-Car H3.Changes compared to v1:
- Add R-Car H3 (r8a7795) support,
- Use "renesas,<type>-sysc" instead of "renesas,sysc-<type>",
- Add fallback compatibility strings for R-Car Gen2 and Gen3.Dependencies:
- renesas-devel-20160411-v4.6-rc3
- clk-renesas-for-v4.7
- "[PATCH v2 0/4] clk: renesas: R-Car SYSC PM Domain Preparation",
- "[PATCH v5 0/7] PM / Domains: Add DT bindings for the R-Car System Controller",
- "[PATCH v5 00/11] soc: renesas: Add R-Car SYSC PM Domain Support".
Note that these are hard dependencies: adding SYSC PM Domains to DTS files without driver support will cause breakage!For your convenience, I've pushed this, incl. all dependencies, to the topic/rcar-sysc-pd-v5 branch of
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.
Integration with renesas-drivers-2016-04-12-v4.6-rc3 is available in the topic/gen3-latest branch.This has been tested on r8a7779/marzen, r8a7790/lager, r8a7791/koelsch, r8a7794/alt, and r8a7795/salvator-x.
Thanks for applying!
Geert Uytterhoeven (12):
ARM: dts: r8a7779: Add SYSC PM Domains
ARM: dts: r8a7790: Add SYSC PM Domains
ARM: dts: r8a7791: Add SYSC PM Domains
ARM: dts: r8a7793: Add SYSC PM Domains
ARM: dts: r8a7794: Add SYSC PM Domains
arm64: dts: r8a7795: Add SYSC PM Domains
ARM: dts: r8a7779: Use SYSC "always-on" PM Domain
ARM: dts: r8a7790: Use SYSC "always-on" PM Domain
ARM: dts: r8a7791: Use SYSC "always-on" PM Domain
ARM: dts: r8a7793: Use SYSC "always-on" PM Domain
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain
arm64: dts: r8a7795: Use SYSC "always-on" PM Domainarch/arm/boot/dts/r8a7779.dtsi | 54 ++++++----- arch/arm/boot/dts/r8a7790.dtsi | 155 ++++++++++++++++-------------- arch/arm/boot/dts/r8a7791.dtsi | 156 ++++++++++++++++--------------- arch/arm/boot/dts/r8a7793.dtsi | 105 +++++++++++---------- arch/arm/boot/dts/r8a7794.dtsi | 116++++++++++++-----------
arch/arm64/boot/dts/renesas/r8a7795.dtsi| 123 +++++++++++++----------- 6 files changed, 389 insertions(+), 320 deletions(-)
Signature · 3 lines
Regards, Laurent Pinchart