Skip to contentSkip to conversation

compat-wireless: ath9kl and compat_autoconf.h fixes

PATCH Superseded Hauke Mehrtens 8 participants 23 messages Sep 11, 2010 – Oct 5, 2010 1 message not in the archive Kbuild

lore
Share & tools
lore
#0 lore raw

v2 cover compat-wireless: ath9kl and compat_autoconf.h fixes

This series contains some fixes for the ath6kl driver, the compat_autoconf.h file now contains most of the conditions from config.mk and some fixes for CONFIG_WIRELESS_EXT=n were added.

This patch series was build tested with kernel 2.6.24 to 2.6.37. It was build tested with kernel config:
* CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=n
* CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=y
* CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=n
* CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=y

v1 -> v2:
* split "add conditions form config into compat_autoconf.h"
* reorder patches
* add brcm80211 driver

Hauke Mehrtens (8):
compat-wireless: handle depending on something build as module
compat-wireless: make atk6kl build with older kernels
compat-wireless: fix for CONFIG_WIRELESS_EXT=n
compat-wireless: build if kernel does not have mac80211
compat-wireless: add conditions form config into compat_autoconf.h
compat-wireless: Add warning if wext is deactivated
compat-wireless: remove special handling for CONFIG_CFG80211_WEXT
compat-wireless: add brcm80211 driver

 Makefile                                     |    1 +
 config.mk                                    |  139 ++++++++++++++------------
 patches/10-add-wext-handlers-to-netdev.patch |    8 ++-
 patches/33-autoconf.patch                    |   15 +++
 patches/34-backport-bin_attribute.patch      |   47 +++++++++
 patches/35-backport-brcm80211-Makefile.patch |   11 ++
 scripts/admin-update.sh                      |    1 +
 scripts/gen-compat-autoconf.sh               |    8 +-
 8 files changed, 161 insertions(+), 69 deletions(-)
 create mode 100644 patches/33-autoconf.patch
 create mode 100644 patches/34-backport-bin_attribute.patch
 create mode 100644 patches/35-backport-brcm80211-Makefile.patch
#1 lore raw

v2 cover compat-wireless: ath9kl and compat_autoconf.h fixes

This series contains some fixes for the ath6kl driver, the compat_autoconf.h file now contains most of the conditions from config.mk and some fixes for CONFIG_WIRELESS_EXT=n were added.

This patch series was build tested with kernel 2.6.24 to 2.6.37. It was build tested with kernel config:
* CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=n
* CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=y
* CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=n
* CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=y

v1 -> v2:
* split "add conditions form config into compat_autoconf.h"
* reorder patches
* add brcm80211 driver

Hauke Mehrtens (8):
compat-wireless: handle depending on something build as module
compat-wireless: make atk6kl build with older kernels
compat-wireless: fix for CONFIG_WIRELESS_EXT=n
compat-wireless: build if kernel does not have mac80211
compat-wireless: add conditions form config into compat_autoconf.h
compat-wireless: Add warning if wext is deactivated
compat-wireless: remove special handling for CONFIG_CFG80211_WEXT
compat-wireless: add brcm80211 driver

 Makefile                                     |    1 +
 config.mk                                    |  139 ++++++++++++++------------
 patches/10-add-wext-handlers-to-netdev.patch |    8 ++-
 patches/33-autoconf.patch                    |   15 +++
 patches/34-backport-bin_attribute.patch      |   47 +++++++++
 patches/35-backport-brcm80211-Makefile.patch |   11 ++
 scripts/admin-update.sh                      |    1 +
 scripts/gen-compat-autoconf.sh               |    8 +-
 8 files changed, 161 insertions(+), 69 deletions(-)
 create mode 100644 patches/33-autoconf.patch
 create mode 100644 patches/34-backport-bin_attribute.patch
 create mode 100644 patches/35-backport-brcm80211-Makefile.patch
#2 lore raw

PATCH v2 1/8 compat-wireless: handle depending on something build as module

In reply to Hauke Mehrtens

If something was build as module in the kernel it is named CONFIG_..._MODULE in autoconf.h. We have to check for bouth the name with and wothout _MODULE at the end.

---
 scripts/gen-compat-autoconf.sh |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
scripts/gen-compat-autoconf.sh +2 -2
index 5d38ea1..62aa890 100755
@@ -148,11 +148,11 @@ kernel_version_req $OLDEST_KERNEL_SUPPORTED
 for i in $(egrep '^CONFIG_|^ifdef CONFIG_|^ifndef CONFIG_|^endif #CONFIG_|^else #CONFIG_' $COMPAT_CONFIG | sed 's/ /+/'); do
 	case $i in
 	'ifdef+CONFIG_'* )
-		echo "#$i" | sed 's/+/ /' | sed 's/\(ifdef CONFIG_COMPAT_KERNEL_\)\([0-9]*\)/if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,\2))/'
+		echo "#$i" | sed -e 's/+/ /' -e 's/\(ifdef CONFIG_COMPAT_KERNEL_\)\([0-9]*\)/if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,\2))/' -e 's/\(#ifdef \)\(CONFIG_[^:space:]*\)/#if defined(\2) || defined(\2_MODULE)/'
 		continue
 		;;
 	'ifndef+CONFIG_'* )
-		echo "#$i" | sed 's/+/ /' | sed 's/\(ifndef CONFIG_COMPAT_KERNEL_\)\([0-9]*\)/if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,\2))/'
+		echo "#$i" | sed -e 's/+/ /' -e 's/\(ifndef CONFIG_COMPAT_KERNEL_\)\([0-9]*\)/if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,\2))/' -e 's/\(#ifndef \)\(CONFIG_[^:space:]*\)/#if !defined(\2) && !defined(\2_MODULE)/'
 		continue
 		;;
 	'else+#CONFIG_'* | 'endif+#CONFIG_'* )
Signature · 1 line
1.7.0.4
#3 lore raw

PATCH v2 2/8 compat-wireless: make atk6kl build with older kernels

In reply to Hauke Mehrtens

Now it will be build for kernel < 2.6.28. CONFIG_STAGING was introduced with that kernel version.

---
 config.mk                               |    2 -
 patches/33-autoconf.patch               |   15 ++++++++++
 patches/34-backport-bin_attribute.patch |   47 +++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+), 2 deletions(-)
 create mode 100644 patches/33-autoconf.patch
 create mode 100644 patches/34-backport-bin_attribute.patch
config.mk +0 -2
index 3c6d416..458de29 100644
@@ -490,7 +490,6 @@ CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_MRVL_SDIO=m
 
 ifneq ($(CONFIG_COMPAT_STAGING),)
-ifdef CONFIG_COMPAT_KERNEL_32
 CONFIG_ATH6KL_CFG80211=y
 CONFIG_ATH6KL_DEBUG=y
 # CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
@@ -502,7 +501,6 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
 # CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m
-endif #CONFIG_COMPAT_KERNEL_32
 endif
 
 
patches/33-autoconf.patch new file +15 -0
new file mode 100644
index 0000000..5d767fd
@@ -0,0 +1,15 @@
+--- a/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h
++++ b/drivers/staging/ath6kl/os/linux/include/ar6000_drv.h
+@@ -27,7 +27,12 @@
+ #include <linux/version.h>
+ 
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33))
+ #include <generated/autoconf.h>
++#else
++#include <linux/autoconf.h>
++#endif
++#include <linux/compat_autoconf.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
patches/34-backport-bin_attribute.patch new file +47 -0

47 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#4 lore raw

PATCH v2 3/8 compat-wireless: fix for CONFIG_WIRELESS_EXT=n

In reply to Hauke Mehrtens

Some modules need CONFIG_WIRELESS_EXT to be set. They should not be build if CONFIG_WIRELESS_EXT was not set.

---
 config.mk |   15 ++++++++++++++-
 1 files changed, 14 insertions(+), 1 deletions(-)
config.mk +14 -1
index 458de29..1498573 100644
@@ -248,11 +248,13 @@ CONFIG_B43LEGACY_LEDS=y
 CONFIG_B43LEGACY_DMA=y
 CONFIG_B43LEGACY_PIO=y
 
+ifdef CONFIG_WIRELESS_EXT
+ifdef CONFIG_WEXT_SPY
+ifdef CONFIG_WEXT_PRIV
 # The Intel ipws
 CONFIG_LIBIPW=m
 # CONFIG_LIBIPW_DEBUG=y
 
-
 CONFIG_IPW2100=m
 CONFIG_IPW2100_MONITOR=y
 # CONFIG_IPW2100_DEBUG=y
@@ -274,6 +276,9 @@ CONFIG_IPW2200_QOS=y
 # it on via sysfs:
 #
 # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+endif #CONFIG_WEXT_PRIV
+endif #CONFIG_WEXT_SPY
+endif #CONFIG_WIRELESS_EXT
 
 ifneq ($(CONFIG_SSB),)
 # Sonics Silicon Backplane
@@ -331,6 +336,9 @@ else #CONFIG_COMPAT_KERNEL_27
 CONFIG_ATL1C=m
 endif #CONFIG_COMPAT_KERNEL_27
 
+ifdef CONFIG_WIRELESS_EXT
+ifdef CONFIG_WEXT_SPY
+ifdef CONFIG_WEXT_PRIV
 CONFIG_HERMES=m
 CONFIG_HERMES_CACHE_FW_ON_INIT=y
 ifneq ($(CONFIG_PPC_PMAC),)
@@ -344,6 +352,9 @@ ifneq ($(CONFIG_PCMCIA),)
 CONFIG_PCMCIA_HERMES=m
 CONFIG_PCMCIA_SPECTRUM=m
 endif
+endif #CONFIG_WEXT_PRIV
+endif #CONFIG_WEXT_SPY
+endif #CONFIG_WIRELESS_EXT
 
 endif
 ## end of PCI
@@ -490,6 +501,7 @@ CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_MRVL_SDIO=m
 
 ifneq ($(CONFIG_COMPAT_STAGING),)
+ifdef CONFIG_WIRELESS_EXT
 CONFIG_ATH6KL_CFG80211=y
 CONFIG_ATH6KL_DEBUG=y
 # CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
@@ -501,6 +513,7 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
 # CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m
+endif #CONFIG_WIRELESS_EXT
 endif
 
 
Signature · 1 line
1.7.0.4
#5 lore raw

PATCH v2 4/8 compat-wireless: build if kernel does not have mac80211

In reply to Hauke Mehrtens

In kernel 2.6.31 the attributes do_not_encrypt and requeue were removed from struct sk_buff so we do not need mac80211 to be build while the kernel was build for nwer kernels.

---
 config.mk |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)
config.mk +4 -2
index 1498573..8b0038c 100644
@@ -52,9 +52,11 @@ endif
 #
 # skb->requeue
 #
-ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 && echo yes),yes)
+# In kernel 2.6.32 both attributes were removed.
+#
+ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
 ifeq ($(CONFIG_MAC80211),)
-$(error "ERROR: Your >=2.6.27 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
+$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
 endif
 endif
 
Signature · 1 line
1.7.0.4
#6 lore raw

PATCH v2 5/8 compat-wireless: add conditions form config into compat_autoconf.h

In reply to Hauke Mehrtens

We do not have to use "ifneq ($(CONFIG_...),)", "ifdef CONFIG_..." will also work. It does not matter if it was set to m or y.
Now this can be added into compat_autoconf.h without changing the script.

---
 config.mk |   86 ++++++++++++++++++++++++++++++------------------------------
 1 files changed, 43 insertions(+), 43 deletions(-)
config.mk +43 -43
index 8b0038c..b7ef1ce 100644
@@ -102,9 +102,9 @@ endif
 endif #CONFIG_COMPAT_KERNEL_27
 
 ifdef CONFIG_COMPAT_KERNEL_33
-ifneq ($(CONFIG_FW_LOADER),)
+ifdef CONFIG_FW_LOADER
  CONFIG_COMPAT_FIRMWARE_CLASS=m
-endif
+endif #CONFIG_FW_LOADER
 endif #CONFIG_COMPAT_KERNEL_33
 
 
@@ -161,9 +161,9 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 # CONFIG_BT_CMTP depends on ISDN_CAPI
-ifneq ($(CONFIG_ISDN_CAPI),)
+ifdef CONFIG_ISDN_CAPI
 CONFIG_BT_CMTP=m
-endif
+endif #CONFIG_ISDN_CAPI
 CONFIG_BT_HIDP=m
 
 CONFIG_BT_HCIUART=M
@@ -175,12 +175,12 @@ CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 
-ifneq ($(CONFIG_PCMCIA),)
+ifdef CONFIG_PCMCIA
 CONFIG_BT_HCIDTL1=m
 CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
-endif
+endif #CONFIG_PCMCIA
 
 
 # CONFIG_CFG80211_WEXT will be resepected for
@@ -194,19 +194,19 @@ endif
 #
 # For newer kernels we'll just respect your own kernel's
 # autoconf.h
-ifneq ($(CONFIG_WIRELESS_EXT),)
+ifdef CONFIG_WIRELESS_EXT
  CONFIG_CFG80211_WEXT=y
-endif
+endif #CONFIG_WIRELESS_EXT
 
 ifneq ($(CONFIG_STAGING),)
-CONFIG_COMPAT_STAGING=m
+ CONFIG_COMPAT_STAGING=m
 endif
 
 # mac80211 test driver
 CONFIG_MAC80211_HWSIM=m
 
 # PCI Drivers
-ifneq ($(CONFIG_PCI),)
+ifdef CONFIG_PCI
 
 CONFIG_ATH5K=m
 # CONFIG_ATH5K_DEBUG=y
@@ -233,9 +233,9 @@ CONFIG_IWL3945=m
 CONFIG_B43=m
 CONFIG_B43_HWRNG=y
 CONFIG_B43_PCI_AUTOSELECT=y
-ifneq ($(CONFIG_PCMCIA),)
+ifdef CONFIG_PCMCIA
 CONFIG_B43_PCMCIA=y
-endif
+endif #CONFIG_PCMCIA
 CONFIG_B43_LEDS=y
 CONFIG_B43_PHY_LP=y
 CONFIG_B43_NPHY=y
@@ -282,7 +282,7 @@ endif #CONFIG_WEXT_PRIV
 endif #CONFIG_WEXT_SPY
 endif #CONFIG_WIRELESS_EXT
 
-ifneq ($(CONFIG_SSB),)
+ifdef CONFIG_SSB
 # Sonics Silicon Backplane
 CONFIG_SSB_SPROM=y
 # CONFIG_SSB_DEBUG=y
@@ -290,12 +290,12 @@ CONFIG_SSB_SPROM=y
 CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST=y
 CONFIG_SSB_B43_PCI_BRIDGE=y
-ifneq ($(CONFIG_PCMCIA),)
+ifdef CONFIG_PCMCIA
 CONFIG_SSB_PCMCIAHOST=y
-endif
+endif #CONFIG_PCMCIA
 # CONFIG_SSB_DEBUG=y
 CONFIG_SSB_DRIVER_PCICORE=y
-endif
+endif #CONFIG_SSB
 
 CONFIG_P54_PCI=m
 
@@ -309,22 +309,22 @@ CONFIG_ADM8211=m
 CONFIG_RT2X00_LIB_PCI=m
 CONFIG_RT2400PCI=m
 CONFIG_RT2500PCI=m
-ifneq ($(CONFIG_CRC_CCITT),)
+ifdef CONFIG_CRC_CCITT
 CONFIG_RT2800PCI=m
 CONFIG_RT2800PCI_PCI=y
 # CONFIG_RT2800PCI_RT30XX=y
 # CONFIG_RT2800PCI_RT35XX=y
 # CONFIG_RT2800PCI_SOC=y
-endif
+endif #CONFIG_CRC_CCITT
 NEED_RT2X00=y
 
 # Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
 # CRC to check the firmware. We check here first for the PCI
 # driver as we're in the PCI section.
-ifneq ($(CONFIG_CRC_ITU_T),)
+ifdef CONFIG_CRC_ITU_T
 CONFIG_RT61PCI=m
 NEED_RT2X00_FIRMWARE=y
-endif
+endif #CONFIG_CRC_ITU_T
 
 CONFIG_MWL8K=m
 
@@ -343,25 +343,25 @@ ifdef CONFIG_WEXT_SPY
 ifdef CONFIG_WEXT_PRIV
 CONFIG_HERMES=m
 CONFIG_HERMES_CACHE_FW_ON_INIT=y
-ifneq ($(CONFIG_PPC_PMAC),)
+ifdef CONFIG_PPC_PMAC
 CONFIG_APPLE_AIRPORT=m
-endif
+endif #CONFIG_PPC_PMAC
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
 CONFIG_NORTEL_HERMES=m
 CONFIG_PCI_HERMES=m
-ifneq ($(CONFIG_PCMCIA),)
+ifdef CONFIG_PCMCIA
 CONFIG_PCMCIA_HERMES=m
 CONFIG_PCMCIA_SPECTRUM=m
-endif
+endif #CONFIG_PCMCIA
 endif #CONFIG_WEXT_PRIV
 endif #CONFIG_WEXT_SPY
 endif #CONFIG_WIRELESS_EXT
 
-endif
+endif #CONFIG_PCI
 ## end of PCI
 
-ifneq ($(CONFIG_PCMCIA),)
+ifdef CONFIG_PCMCIA
 
 ifdef CONFIG_COMPAT_KERNEL_27
 CONFIG_LIBERTAS=n
@@ -371,14 +371,14 @@ CONFIG_LIBERTAS_CS=m
 NEED_LIBERTAS=y
 endif #CONFIG_COMPAT_KERNEL_27
 
-endif
+endif #CONFIG_PCMCIA
 ## end of PCMCIA
 
 # This is required for some cards
 CONFIG_EEPROM_93CX6=m
 
 # USB Drivers
-ifneq ($(CONFIG_USB),)
+ifdef CONFIG_USB
 CONFIG_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG=y
 
@@ -420,19 +420,19 @@ CONFIG_ATH9K_HTC=m
 
 # RT2500USB does not require firmware
 CONFIG_RT2500USB=m
-ifneq ($(CONFIG_CRC_CCITT),)
+ifdef CONFIG_CRC_CCITT
 CONFIG_RT2800USB=m
 CONFIG_RT2800USB_RT30XX=y
 CONFIG_RT2800USB_RT35XX=y
 CONFIG_RT2800USB_UNKNOWN=y
-endif
+endif #CONFIG_CRC_CCITT
 CONFIG_RT2X00_LIB_USB=m
 NEED_RT2X00=y
 # RT73USB requires firmware
-ifneq ($(CONFIG_CRC_ITU_T),)
+ifdef CONFIG_CRC_ITU_T
 CONFIG_RT73USB=m
 NEED_RT2X00_FIRMWARE=y
-endif
+endif #CONFIG_CRC_ITU_T
 
 ifdef CONFIG_COMPAT_KERNEL_27
 CONFIG_LIBERTAS_THINFIRM_USB=n
@@ -452,15 +452,15 @@ CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_ATH3K=m
 
-endif # end of USB driver list
+endif #CONFIG_USB end of USB driver list
 
-ifneq ($(CONFIG_SPI_MASTER),)
+ifdef CONFIG_SPI_MASTER
 ifndef CONFIG_COMPAT_KERNEL_25
 
-ifneq ($(CONFIG_CRC7),)
+ifdef CONFIG_CRC7
 CONFIG_WL1251_SPI=m
 CONFIG_WL1271_SPI=m
-endif
+endif #CONFIG_CRC7
 CONFIG_P54_SPI=m
 
 ifdef CONFIG_COMPAT_KERNEL_27
@@ -472,21 +472,21 @@ NEED_LIBERTAS=y
 endif #CONFIG_COMPAT_KERNEL_27
 
 endif #CONFIG_COMPAT_KERNEL_25
-endif # end of SPI driver list
+endif #CONFIG_SPI_MASTER end of SPI driver list
 
-ifneq ($(CONFIG_MMC),)
+ifdef CONFIG_MMC
 
 CONFIG_SSB_SDIOHOST=y
 CONFIG_B43_SDIO=y
 
-ifneq ($(CONFIG_CRC7),)
+ifdef CONFIG_CRC7
 CONFIG_WL1251_SDIO=m
 
 ifndef CONFIG_COMPAT_KERNEL_32
 CONFIG_WL1271_SDIO=m
 endif #CONFIG_COMPAT_KERNEL_32
 
-endif
+endif #CONFIG_CRC7
 
 ifdef CONFIG_COMPAT_KERNEL_27
 CONFIG_LIBERTAS_SDIO=n
@@ -516,7 +516,7 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m
 endif #CONFIG_WIRELESS_EXT
-endif
+endif #CONFIG_MMC
 
 
 endif # end of SDIO driver list
@@ -551,10 +551,10 @@ CONFIG_ATH_COMMON=m
 # CONFIG_ATH_DEBUG=y
 
 CONFIG_WL12XX=y
-ifneq ($(CONFIG_CRC7),)
+ifdef CONFIG_CRC7
 CONFIG_WL1251=m
 CONFIG_WL1271=m
-endif
+endif #CONFIG_CRC7
 
 ifdef CONFIG_COMPAT_KERNEL_27
 CONFIG_LIBERTAS=n
Signature · 1 line
1.7.0.4
#7 lore raw

PATCH v2 6/8 compat-wireless: Add warning if wext is deactivated

In reply to Hauke Mehrtens

Add a build warning if CONFIG_CFG80211_WEXT can not be activated.

wireless_handlers is only avaliable if the kernel was build with CONFIG_WIRELESS_EXT. Add a kernel log warning if CONFIG_CFG80211_WEXT is activated but we do not have CONFIG_WIRELESS_EXT, so we ware unable to attach the wireless_handlers for wext.

---
 config.mk                                    |    2 ++
 patches/10-add-wext-handlers-to-netdev.patch |    8 +++++++-
 2 files changed, 9 insertions(+), 1 deletions(-)
config.mk +2 -0
index b7ef1ce..464a769 100644
@@ -196,6 +196,8 @@ endif #CONFIG_PCMCIA
 # autoconf.h
 ifdef CONFIG_WIRELESS_EXT
  CONFIG_CFG80211_WEXT=y
+else #CONFIG_CFG80211_WEXT
+$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
 endif #CONFIG_WIRELESS_EXT
 
 ifneq ($(CONFIG_STAGING),)
patches/10-add-wext-handlers-to-netdev.patch +7 -1
index 8a5c6e5..7f31c73 100644
@@ -29,12 +29,18 @@ CONFIG_WIRELESS_EXT in compat-wireless.
  	device_initialize(&rdev->wiphy.dev);
  	rdev->wiphy.dev.class = &ieee80211_class;
  	rdev->wiphy.dev.platform_data = rdev;
-@@ -712,6 +708,8 @@ static int cfg80211_netdev_notifier_call
+@@ -712,6 +708,14 @@ static int cfg80211_netdev_notifier_call
  		wdev->sme_state = CFG80211_SME_IDLE;
  		mutex_unlock(&rdev->devlist_mtx);
  #ifdef CONFIG_CFG80211_WEXT
++#ifdef CONFIG_WIRELESS_EXT
 +		if (!dev->wireless_handlers)
 +			dev->wireless_handlers = &cfg80211_wext_handler;
++#else
++		printk(KERN_WARNING "cfg80211: wext will not work because "
++			"kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools "
++			"using wext interface like iwconfig will not work.\n");
++#endif
  		wdev->wext.default_key = -1;
  		wdev->wext.default_mgmt_key = -1;
  		wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
Signature · 1 line
1.7.0.4
#8 lore raw

Re: [PATCH 6/8] compat-wireless: Add warning if wext is deactivated

Quoted 8 lines · Hauke Mehrtens

++#ifdef CONFIG_WIRELESS_EXT
+ if (!dev->wireless_handlers)
+ dev->wireless_handlers = &cfg80211_wext_handler;
++#else
++ printk(KERN_WARNING "cfg80211: wext will not work because "
++ "kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools "
++ "using wext interface like iwconfig will not work.\n");
++#endif

This could use printk_once :-)

Also, if the kernel you're compiling against is new enough and was built with cfg80211, this isn't necessary, but the normal code could be used (which I believe this patch currently removes, rather than ifdeffing it)

johannes

#9 lore raw

Re: [PATCH 6/8] compat-wireless: Add warning if wext is deactivated

Quoted 12 lines · Johannes Berg
Quoted 8 lines · Hauke Mehrtens

++#ifdef CONFIG_WIRELESS_EXT
+ if (!dev->wireless_handlers)
+ dev->wireless_handlers = &cfg80211_wext_handler;
++#else
++ printk(KERN_WARNING "cfg80211: wext will not work because "
++ "kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools "
++ "using wext interface like iwconfig will not work.\n");
++#endif

Quoted 1 line

This could use printk_once :-)

Yes that will be better. I will resend a new patch.

Quoted 3 lines

Also, if the kernel you're compiling against is new enough and was built with cfg80211, this isn't necessary, but the normal code could be used (which I believe this patch currently removes, rather than ifdeffing it)

Using the normal code does not work because the kernel accesses the wext handler through struct wiphy which is shipped with compat-wireless. struct wiphy used in e.g. kernel 2.6.33 is different from the struct used in compat-wireless. The wext attribute is at a different position and the kernel would dereference a wrong pointer or something else.

Hauke

#10 lore raw

PATCH v2 6/8 compat-wireless: Add warning if wext is deactivated

Add a build warning if CONFIG_CFG80211_WEXT can not be activated.

wireless_handlers is only avaliable if the kernel was build with CONFIG_WIRELESS_EXT. Add a kernel log warning if CONFIG_CFG80211_WEXT is activated but we do not have CONFIG_WIRELESS_EXT, so we ware unable to attach the wireless_handlers for wext.

---
 config.mk                                    |    2 ++
 patches/10-add-wext-handlers-to-netdev.patch |    8 +++++++-
 2 files changed, 9 insertions(+), 1 deletions(-)
config.mk +2 -0
index b7ef1ce..464a769 100644
@@ -196,6 +196,8 @@ endif #CONFIG_PCMCIA
 # autoconf.h
 ifdef CONFIG_WIRELESS_EXT
  CONFIG_CFG80211_WEXT=y
+else #CONFIG_CFG80211_WEXT
+$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
 endif #CONFIG_WIRELESS_EXT
 
 ifneq ($(CONFIG_STAGING),)
patches/10-add-wext-handlers-to-netdev.patch +7 -1
index 8a5c6e5..7f31c73 100644
@@ -29,12 +29,18 @@ CONFIG_WIRELESS_EXT in compat-wireless.
  	device_initialize(&rdev->wiphy.dev);
  	rdev->wiphy.dev.class = &ieee80211_class;
  	rdev->wiphy.dev.platform_data = rdev;
-@@ -712,6 +708,8 @@ static int cfg80211_netdev_notifier_call
+@@ -712,6 +708,14 @@ static int cfg80211_netdev_notifier_call
  		wdev->sme_state = CFG80211_SME_IDLE;
  		mutex_unlock(&rdev->devlist_mtx);
  #ifdef CONFIG_CFG80211_WEXT
++#ifdef CONFIG_WIRELESS_EXT
 +		if (!dev->wireless_handlers)
 +			dev->wireless_handlers = &cfg80211_wext_handler;
++#else
++		printk(KERN_WARNING "cfg80211: wext will not work because "
++			"kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools "
++			"using wext interface like iwconfig will not work.\n");
++#endif
  		wdev->wext.default_key = -1;
  		wdev->wext.default_mgmt_key = -1;
  		wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
Signature · 1 line
1.7.0.4
#11 lore raw

PATCH 1/1 compat-wireless: introduce driver-select group for atlxx

In this patch:
- fixed a description typo
- changed yellow to purple color in bash as it hurts the eye/hard to read in white background (gnome)
- placed "atl1 atl2 atl1e atl1c" on one line to preserve user space and visibility, this is after all a _wireless_ compat
- introduced "atlxx" group for atlx(x) Ethernet devices in "BLUE" for distinguishability
- sorted all module groups together

---

scripts/driver-select +21 -11
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Copyright 2009        Luis R. Rodriguez <[email protected]>
 #
-# This this to select your compat-wireless driver and
+# This script allows you to select your compat-wireless driver and
 # reduce compilation time.
 
 DRIVERS_MAKEFILE="drivers/net/wireless/Makefile"
@@ -42,7 +42,7 @@ fi
 
 # b43 needs some more work for driver-select, the SSB stuff, plus
 # what if you update b44 but not b43? It will bust.
-SUPPORTED_ETH_DRIVERS="atl1 atl2 atl1e atl1c"
+SUPPORTED_ETH_DRIVERS=""
 
 function usage {
 	echo -e "${GREEN}Usage${NORMAL}: ${CYAN}$0${NORMAL} [ ${PURPLE}<driver-name>${NORMAL} | ${PURPLE}<driver-group-name>${NORMAL} | ${GREEN}restore${NORMAL} ]"
@@ -53,7 +53,7 @@ function usage {
 		echo -e "\t${PURPLE}${i}${NORMAL}"
 	done
 
-	echo -e "\nSupported Ethernet drivers:"
+	echo -e "\nSupported Ethernet drivers: < ${PURPLE}atl1 atl2 atl1e atl1c${NORMAL} >"
 	for i in $SUPPORTED_ETH_DRIVERS; do
 		echo -e "\t${PURPLE}${i}${NORMAL}"
 	done
@@ -66,6 +66,8 @@ function usage {
 	echo -e "\t${CYAN}iwlwifi${NORMAL} < ${PURPLE} iwl3945 iwlagn ${NORMAL}>"
 	echo -e "\t${CYAN}rtl818x${NORMAL} < ${PURPLE} rtl8180 rtl8187 ${NORMAL}>"
 	echo -e "\t${CYAN}wl12xx${NORMAL} < ${PURPLE} wl1251 (SPI and SDIO) wl1271 ${NORMAL}>"
+	
+	echo -e "\t${BLUE}atlxx${NORMAL} < ${PURPLE} atl1 atl2 atl1e atl1c ${NORMAL}>"
 
 	echo -e "Restoring compat-wireless:"
 	echo -e "\t${GREEN}restore${NORMAL}: you can use this option to restore compat-wireless to the original state"
@@ -265,7 +267,7 @@ fi
 
 if [[ ! -f built-in.o ]]; then
 	if [[ "$1" != "restore" ]]; then
-		echo -e "${YELLOW}Processing new driver-select request...${NORMAL}"
+		echo -e "${PURPLE}Processing new driver-select request...${NORMAL}"
 	fi
 fi
 
@@ -279,9 +281,9 @@ fi
 # we'll be trying to leave drivers on Makefiles which are not
 # already there from a previous run.
 if [ -f built-in.o ]; then
-	echo -e "${YELLOW}Old build found, going to clean this up first...${NORMAL}"
+	echo -e "${PURPLE}Old build found, going to clean this up first...${NORMAL}"
 	make clean
-	echo -e "${YELLOW}Restoring Makefiles...${NORMAL}"
+	echo -e "${PURPLE}Restoring Makefiles...${NORMAL}"
 	./$0 restore
 fi
 
@@ -289,6 +291,7 @@ case $1 in
 	restore)
 		restore_compat
 		;;
+# Group drivers
 	atheros)
 		select_drivers		CONFIG_ATH_COMMON \
 					CONFIG_ZD1211RW
@@ -316,6 +319,12 @@ case $1 in
 		disable_staging
 		disable_var_01
 		;;
+	rtl818x)
+		select_drivers		CONFIG_RTL8180 CONFIG_RTL8187
+		disable_staging
+		disable_var_02
+		;;
+# Singular modules
 	ath5k)
 		disable_staging
 		disable_bt_usb_ethernet_var
@@ -353,11 +362,6 @@ case $1 in
 		disable_ath6kl
 		select_driver		CONFIG_NOTHING
 		;;
-	rtl818x)
-		select_drivers		CONFIG_RTL8180 CONFIG_RTL8187
-		disable_staging
-		disable_var_02
-		;;
 	zd1211rw)
 		select_driver		CONFIG_ZD1211RW
 		disable_staging
@@ -375,6 +379,7 @@ case $1 in
 		disable_staging
 		disable_var_02
 		;;
+# Ethernet drivers
 	atl1)
 		enable_only_ethernet
 		echo -e "obj-\$(CONFIG_ATL1) += atlx/" > $DRIVERS_NET
@@ -391,6 +396,11 @@ case $1 in
 		enable_only_ethernet
 		echo -e "obj-\$(CONFIG_ATL1C) += atl1c/" > $DRIVERS_NET
 		;;
+	atlxx)
+		select_drivers		CONFIG_ATL1 CONFIG_ATL2 CONFIG_ATL1E CONFIG_ATL1C
+		enable_only_ethernet
+		disable_b44
+		;;
 	*)
 		echo "Unsupported driver"
 		exit

A message that is not in the archive (sent off-list or not yet received): [email protected]

#13 lore raw

Re: [PATCH] compat-wireless: introduce driver-select group for atlxx

Quoted 1 line · Walter Goldens

Hi, Luis. I take it you're not applying this patch?

I am, sorry I just missed it, feel free to remind me anytime if I miss a patch. I just totally missed it.

Lis

#14 lore raw

Re: [PATCH] compat-wireless: introduce driver-select group for atlxx

In reply to Walter Goldens
Quoted 8 lines · Walter Goldens

In this patch:
- fixed a description typo
- changed yellow to purple color in bash as it hurts the eye/hard to read in white background (gnome)
- placed "atl1 atl2 atl1e atl1c" on one line to preserve user space and visibility, this is after all a _wireless_ compat
- introduced "atlxx" group for atlx(x) Ethernet devices in "BLUE" for distinguishability
- sorted all module groups together

Applied, thanks!

Luis

#15 lore raw

PATCH v2 6/8 compat-wireless: Add warning if wext is deactivated

In reply to Hauke Mehrtens

Add a build warning if CONFIG_CFG80211_WEXT can not be activated.

wireless_handlers is only avaliable if the kernel was build with CONFIG_WIRELESS_EXT. Add a kernel log warning if CONFIG_CFG80211_WEXT is activated but we do not have CONFIG_WIRELESS_EXT, so we ware unable to attach the wireless_handlers for wext.

v2: use printk_once

---
 config.mk                                    |    2 ++
 patches/10-add-wext-handlers-to-netdev.patch |    9 ++++++++-
 2 files changed, 10 insertions(+), 1 deletions(-)
config.mk +2 -0
index b7ef1ce..464a769 100644
@@ -196,6 +196,8 @@ endif #CONFIG_PCMCIA
 # autoconf.h
 ifdef CONFIG_WIRELESS_EXT
  CONFIG_CFG80211_WEXT=y
+else #CONFIG_CFG80211_WEXT
+$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
 endif #CONFIG_WIRELESS_EXT
 
 ifneq ($(CONFIG_STAGING),)
patches/10-add-wext-handlers-to-netdev.patch +8 -1
index 8a5c6e5..f0df259 100644
@@ -29,12 +29,19 @@ CONFIG_WIRELESS_EXT in compat-wireless.
  	device_initialize(&rdev->wiphy.dev);
  	rdev->wiphy.dev.class = &ieee80211_class;
  	rdev->wiphy.dev.platform_data = rdev;
-@@ -712,6 +708,8 @@ static int cfg80211_netdev_notifier_call
+@@ -712,6 +708,15 @@ static int cfg80211_netdev_notifier_call
  		wdev->sme_state = CFG80211_SME_IDLE;
  		mutex_unlock(&rdev->devlist_mtx);
  #ifdef CONFIG_CFG80211_WEXT
++#ifdef CONFIG_WIRELESS_EXT
 +		if (!dev->wireless_handlers)
 +			dev->wireless_handlers = &cfg80211_wext_handler;
++#else
++		printk_once(KERN_WARNING "cfg80211: wext will not work because "
++			    "kernel was compiled with CONFIG_WIRELESS_EXT=n. "
++			    "Tools using wext interface, like iwconfig will "
++			    "not work.\n");
++#endif
  		wdev->wext.default_key = -1;
  		wdev->wext.default_mgmt_key = -1;
  		wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
Signature · 1 line
1.7.0.4
#16 lore raw

PATCH v2 7/8 compat-wireless: remove special handling for CONFIG_CFG80211_WEXT

In reply to Hauke Mehrtens

The special handling for CONFIG_CFG80211_WEXT is not needed any more, because it is only activated when CONFIG_WIRELESS_EXT is also set. Enabling this condition only for kernel <= 2.6.32 was wrong. In compat- wireless we are able to deactivate CONFIG_WIRELESS_EXT for every kernel. For activating it we need CONFIG_WIRELESS_EXT on every kernel. If kernel <= 2.6.31 was build with cfg80211 support CONFIG_WIRELESS_EXT was also selected, so it was activated in most cases for that kernel versions. But it is possible to build compat-wireless without having cfg80211 while building the kernel and that caused problems in the past.

---
 config.mk                      |   20 ++++++++------------
 scripts/gen-compat-autoconf.sh |    4 ----
 2 files changed, 8 insertions(+), 16 deletions(-)
config.mk +8 -12
index 464a769..f2c62ed 100644
@@ -183,19 +183,15 @@ CONFIG_BT_HCIBTUART=m
 endif #CONFIG_PCMCIA
 
 
-# CONFIG_CFG80211_WEXT will be resepected for
-# future kernels but for older kenrels we need
-# to enable it against the the old CONFIG_WIRELESS_EXT.
-# By using a space here we prevent scripts/gen-compat-autoconf.sh
-# from defining CONFIG_CFG80211_WEXT through its grep sweep for ^CONFIG
-# options, instead its handled specially there based on kernel revision.
-# using this logic: if you are on older kernel and have CONFIG_WIRELESS_EXT
-# defined we'll define it.
-#
-# For newer kernels we'll just respect your own kernel's
-# autoconf.h
+# We need CONFIG_WIRELESS_EXT for CONFIG_CFG80211_WEXT for every kernel 
+# version. The new way CONFIG_CFG80211_WEXT is called from the kernel 
+# does not work with compat-wireless because it calls some callback 
+# function on struct wiphy. This struct is shipped with compat-wireless 
+# and changes from kernel version to version. We are using the 
+# wireless_handlers attribute which will be activated by 
+# CONFIG_WIRELESS_EXT. 
 ifdef CONFIG_WIRELESS_EXT
- CONFIG_CFG80211_WEXT=y
+CONFIG_CFG80211_WEXT=y
 else #CONFIG_CFG80211_WEXT
 $(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
 endif #CONFIG_WIRELESS_EXT
scripts/gen-compat-autoconf.sh +0 -4
index 62aa890..9f6e6d2 100755
@@ -195,10 +195,6 @@ if [ -f $KLIB_BUILD/Makefile ]; then
 		echo CONFIG_NETDEVICES_MULTIQUEUE >> $MULT_DEP_FILE
 		define_config_multiple_deps CONFIG_MAC80211_QOS y $ALL_DEPS
 		rm -f $MULT_DEP_FILE
-		# Kernels >= 2.6.32 can disable WEXT :D
-		if [ $SUBLEVEL -le 32 ]; then
-			define_config_dep CONFIG_CFG80211_WEXT 1 CONFIG_WIRELESS_EXT
-		fi
 	fi
 fi
 echo "#endif /* COMPAT_AUTOCONF_INCLUDED */"
Signature · 1 line
1.7.0.4
#17 lore raw

PATCH v2 8/8 compat-wireless: add brcm80211 driver

In reply to Hauke Mehrtens

This driver was compile tested on kernel 2.6.29 to 2.6.36.

---
 Makefile                                     |    1 +
 config.mk                                    |    4 ++++
 patches/35-backport-brcm80211-Makefile.patch |   11 +++++++++++
 scripts/admin-update.sh                      |    1 +
 4 files changed, 17 insertions(+), 0 deletions(-)
 create mode 100644 patches/35-backport-brcm80211-Makefile.patch
Makefile +1 -0
index b590ca2..61adb0d 100644
@@ -39,6 +39,7 @@ obj-$(CONFIG_COMPAT_BLUETOOTH_MODULES) += drivers/bluetooth/
 
 ifeq ($(CONFIG_STAGING_EXCLUDE_BUILD),)
 obj-$(CONFIG_COMPAT_STAGING) += drivers/staging/ath6kl/
+obj-$(CONFIG_COMPAT_STAGING) += drivers/staging/brcm80211/
 endif
 
 
config.mk +4 -0
index f2c62ed..b61c318 100644
@@ -513,6 +513,10 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
 # CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m
+
+CONFIG_BRCM80211=m
+CONFIG_BRCM80211_PCI=y
+
 endif #CONFIG_WIRELESS_EXT
 endif #CONFIG_MMC
 
patches/35-backport-brcm80211-Makefile.patch new file +11 -0
new file mode 100644
index 0000000..2a94756
@@ -0,0 +1,11 @@
+--- a/drivers/staging/brcm80211/Makefile
++++ b/drivers/staging/brcm80211/Makefile
+@@ -15,7 +15,7 @@
+ # OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ 
+-EXTRA_CFLAGS := -DBCMDBG -DWLC_HIGH -DSTA -DWME -DWL11N -DDBAND -DBCMDMA32 -DBCMNVRAMR -Idrivers/staging/brcm80211/sys -Idrivers/staging/brcm80211/phy -Idrivers/staging/brcm80211/util -Idrivers/staging/brcm80211/include -Wall -Wstrict-prototypes -Werror -Wmissing-prototypes
++EXTRA_CFLAGS := -DBCMDBG -DWLC_HIGH -DSTA -DWME -DWL11N -DDBAND -DBCMDMA32 -DBCMNVRAMR -I$(obj)/sys -I$(obj)/phy -I$(obj)/util -I$(obj)/include -Wall -Wstrict-prototypes -Werror -Wmissing-prototypes
+ 
+ PCI_CFLAGS := -DWLC_LOW
+ 
scripts/admin-update.sh +1 -0
index e000faf..6ef281d 100755
@@ -212,6 +212,7 @@ DRIVERS="$DRIVERS drivers/net/wireless/orinoco"
 
 # Staging drivers
 STAGING_DRIVERS="drivers/staging/ath6kl"
+STAGING_DRIVERS="$STAGING_DRIVERS drivers/staging/brcm80211"
 
 # Ethernet drivers
 DRIVERS="$DRIVERS drivers/net/atl1c"
Signature · 1 line
1.7.0.4
#18 lore raw

Re: [PATCH 8/8] compat-wireless: add brcm80211 driver

Umm... do we accept staging drivers in compat-wireless?

Quoted 75 lines · Hauke Mehrtens

This driver was compile tested on kernel 2.6.29 to 2.6.36.

---
 Makefile                                     |    1 + config.mk                                    |    4 ++++ patches/35-backport-brcm80211-Makefile.patch |   11 +++++++++++ scripts/admin-update.sh                      |    1 +

 4 files changed, 17 insertions(+), 0 deletions(-)

 create mode 100644 patches/35-backport-brcm80211-Makefile.patch

Makefile +0 -0
index b590ca2..61adb0d 100644
@@ -39,6 +39,7 @@ obj-$(CONFIG_COMPAT_BLUETOOTH_MODULES) += drivers/bluetooth/
 
  ifeq ($(CONFIG_STAGING_EXCLUDE_BUILD),)

 obj-$(CONFIG_COMPAT_STAGING) += drivers/staging/ath6kl/ +obj-$(CONFIG_COMPAT_STAGING) += drivers/staging/brcm80211/ endif

config.mk +0 -0
index f2c62ed..b61c318 100644
@@ -513,6 +513,10 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
  # CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set

 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m

config.mk +4 -0
+
+CONFIG_BRCM80211=m
+CONFIG_BRCM80211_PCI=y
+

 endif #CONFIG_WIRELESS_EXT
 endif #CONFIG_MMC

patches/35-backport-brcm80211-Makefile.patch new file +11 -0
new file mode 100644
index 0000000..2a94756
@@ -0,0 +1,11 @@
+--- a/drivers/staging/brcm80211/Makefile
++++ b/drivers/staging/brcm80211/Makefile
+@@ -15,7 +15,7 @@
+ # OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+-EXTRA_CFLAGS := -DBCMDBG -DWLC_HIGH -DSTA -DWME -DWL11N -DDBAND -DBCMDMA32 -DBCMNVRAMR -Idrivers/staging/brcm80211/sys -Idrivers/staging/brcm80211/phy -Idrivers/staging/brcm80211/util -Idrivers/staging/brcm80211/include -Wall -Wstrict-prototypes -Werror -Wmissing-prototypes
++EXTRA_CFLAGS := -DBCMDBG -DWLC_HIGH -DSTA -DWME -DWL11N -DDBAND -DBCMDMA32 -DBCMNVRAMR -I$(obj)/sys -I$(obj)/phy -I$(obj)/util -I$(obj)/include -Wall -Wstrict-prototypes -Werror -Wmissing-prototypes
+
+ PCI_CFLAGS := -DWLC_LOW
+
scripts/admin-update.sh +0 -0
index e000faf..6ef281d 100755
@@ -212,6 +212,7 @@ DRIVERS="$DRIVERS drivers/net/wireless/orinoco"
 
  # Staging drivers

 STAGING_DRIVERS="drivers/staging/ath6kl" +STAGING_DRIVERS="$STAGING_DRIVERS drivers/staging/brcm80211"

 # Ethernet drivers
 DRIVERS="$DRIVERS drivers/net/atl1c"
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signature · 1 line
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
#19 lore raw

Re: [PATCH 8/8] compat-wireless: add brcm80211 driver

Quoted 1 line · Gábor Stefanik

Umm... do we accept staging drivers in compat-wireless?

Why shouldn't we accept them in compat?

Signature · 1 line
Greetings Michael.
#20 lore raw

Re: [PATCH 8/8] compat-wireless: add brcm80211 driver

Quoted 9 lines · Michael Büsch
Quoted 1 line · Gábor Stefanik

Umm... do we accept staging drivers in compat-wireless?

Why shouldn't we accept them in compat?

--
Greetings Michael.

Dunno, just given the general hostility of the wireless team towards staging drivers.

Signature · 1 line
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
#21 lore raw

Re: [PATCH 8/8] compat-wireless: add brcm80211 driver

Quoted 6 lines · Gábor Stefanik
Quoted 5 lines · Michael Büsch
Quoted 1 line · Gábor Stefanik

Umm... do we accept staging drivers in compat-wireless?

Why shouldn't we accept them in compat?

Quoted 7 lines
Quoted 4 lines

--
Greetings Michael.

Dunno, just given the general hostility of the wireless team towards staging drivers.

The idea is to enable users, so I'll gladly accept them, thanks haukes, I'll apply after first reviewing your other series.

Luis

#22 lore raw

Re: [PATCH 8/8] compat-wireless: add brcm80211 driver

Quoted 13 lines · Luis R. Rodriguez
Quoted 11 lines · Gábor Stefanik
Quoted 9 lines · Michael Büsch
Quoted 1 line · Gábor Stefanik

Umm... do we accept staging drivers in compat-wireless?

Why shouldn't we accept them in compat?

--
Greetings Michael.

Quoted 6 lines
Quoted 2 lines

Dunno, just given the general hostility of the wireless team towards staging drivers.

The idea is to enable users, so I'll gladly accept them, thanks haukes, I'll apply after first reviewing your other series.

I was going to try and figure out the compat-wireless changes needed to enable brcm80211 myself, so the quick contribution on this is much appreciated by me if nobody else.

- Henry

#23 lore raw
In reply to Hauke Mehrtens
Quoted 34 lines · Hauke Mehrtens

This series contains some fixes for the ath6kl driver, the compat_autoconf.h file now contains most of the conditions from config.mk and some fixes for CONFIG_WIRELESS_EXT=n were added.

This patch series was build tested with kernel 2.6.24 to 2.6.37. It was build tested with kernel config:
 * CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=n
 * CONFIG_WIRELESS_EXT=n + CONFIG_CFG80211_WEXT=y
 * CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=n
 * CONFIG_WIRELESS_EXT=y + CONFIG_CFG80211_WEXT=y

v1 -> v2:
 * split "add conditions form config into compat_autoconf.h"
 * reorder patches
 * add brcm80211 driver

Hauke Mehrtens (8):
 compat-wireless: handle depending on something build as module
 compat-wireless: make atk6kl build with older kernels
 compat-wireless: fix for CONFIG_WIRELESS_EXT=n
 compat-wireless: build if kernel does not have mac80211
 compat-wireless: add conditions form config into compat_autoconf.h
 compat-wireless: Add warning if wext is deactivated
 compat-wireless: remove special handling for CONFIG_CFG80211_WEXT
 compat-wireless: add brcm80211 driver

 Makefile                                     |    1 +
 config.mk                                    |  139 ++++++++++++++------------ patches/10-add-wext-handlers-to-netdev.patch |    8 ++- patches/33-autoconf.patch                    |   15 +++ patches/34-backport-bin_attribute.patch      |   47 +++++++++ patches/35-backport-brcm80211-Makefile.patch |   11 ++ scripts/admin-update.sh                      |    1 + scripts/gen-compat-autoconf.sh               |    8 +-

Quoted 4 lines
 8 files changed, 161 insertions(+), 69 deletions(-)

 create mode 100644 patches/33-autoconf.patch
 create mode 100644 patches/34-backport-bin_attribute.patch create mode 100644 patches/35-backport-brcm80211-Makefile.patch

Great stuff, this makes life so much easier, thanks a lot for all this work! Applied and pushed out. Think it'll get sucked in, in time for the next tarball.

Luis