Regression: Backlight control broken on HP Omen 15‑ax246nf with kernel 7.0.0‑28‑generic
Subsystems (2)
Hello,
I would like to report a regression affecting backlight control on my HP Omen laptop when using kernel 7.0.0‑28‑generic (Ubuntu 24.04 base, Linux Mint 22.3 XFCE).
Summary of the issue:
With kernel 7.0, the screen backlight is stuck at maximum brightness. Brightness keys show the OSD and the slider moves, but the actual backlight does not change. With kernel 6.17, brightness works normally.
Hardware:
- HP Omen 15‑ax246nf
- Intel i5‑7300HQ
- Intel HD Graphics 630 (i915)
- Nvidia GTX 1050 Mobile (disabled via Optimus)
- Linux Mint 22.3 XFCE (Ubuntu 24.04 base)
Backlight controller:/sys/class/backlight/ → intel_backlight acpi_video0 is no longer present under kernel 7.0.
ACPI errors visible only with kernel 7.0:
ACPI BIOS Error (bug): Attempt to CreateField of length zero ACPI Error: Aborting method \_SB.WMID.WQBK
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT
ACPI Error: Aborting method \_SB.WMID.HWMC
ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
Kernel version:
Linux 7.0.0-28-generic #28~24.04.1-Ubuntu SMP PREEMPT_DYNAMIC Wed Jul 1 15:50:57 UTC 2024 x86_64 GNU/Linux
GPU information (inxi -Gxxx):
Device-1: Intel HD Graphics 630 driver: i915
Device-2: NVIDIA GTX 1050 Mobile driver: N/A (Optimus disabled)
Display: X11 driver: modesetting, iris
Monitor: eDP-1 1920x1080 LG Display
Hardware summary (lshw -short):
Intel(R) Core(TM) i5-7300HQ
HD Graphics 630
GeForce GTX 1050 Mobile (disabled)
16 GiB DDR4
Samsung NVMe SSD + 1TB HDD
Expected behavior:
Backlight should be adjustable via intel_backlight or acpi_video0, as in kernel 6.17.
Observed behavior:
Backlight remains at maximum brightness regardless of ACPI events or brightness keys.
Steps to reproduce:
1. Boot kernel 7.0.0‑28‑generic
2. Attempt to change brightness
3. Backlight does not change
This appears to be an ACPI/i915 regression introduced in kernel 7.0.
Thank you for your work.
Quoted 4 lines · harryblanc
I would like to report a regression affecting backlight control on my HP Omen laptop when using kernel 7.0.0‑28‑generic (Ubuntu 24.04 base, Linux Mint 22.3 XFCE).
Hi! Thx for your report. But this is a heavily patched vendor kernel and also a series that is EOL. Please test latest vanilla 7.2-rc or and report back. Ciao, Thorsten
Quoted 58 lines
Summary of the issue:
With kernel 7.0, the screen backlight is stuck at maximum brightness. Brightness keys show the OSD and the slider moves, but the actual backlight does not change.
With kernel 6.17, brightness works normally.Hardware:
- HP Omen 15‑ax246nf
- Intel i5‑7300HQ
- Intel HD Graphics 630 (i915)
- Nvidia GTX 1050 Mobile (disabled via Optimus)
- Linux Mint 22.3 XFCE (Ubuntu 24.04 base)Backlight controller:
/sys/class/backlight/→intel_backlightacpi_video0is no longer present under kernel 7.0.ACPI errors visible only with kernel 7.0:
ACPI BIOS Error (bug): Attempt to CreateField of length zero ACPI Error: Aborting method \_SB.WMID.WQBK
ACPI BIOS Error (bug):AE_AML_BUFFER_LIMIT
ACPI Error: Aborting method \_SB.WMID.HWMC
ACPI: video: [Firmware Bug]: ACPI(PEGP) defines_DODbut not_DOSKernel version:
Linux 7.0.0-28-generic #28~24.04.1-Ubuntu SMPPREEMPT_DYNAMICWed Jul 1 15:50:57 UTC 2024x86_64GNU/LinuxGPU information (inxi -Gxxx):
Device-1: Intel HD Graphics 630 driver: i915
Device-2: NVIDIA GTX 1050 Mobile driver: N/A (Optimus disabled)
Display: X11 driver: modesetting, iris
Monitor: eDP-1 1920x1080 LG DisplayHardware summary (lshw -short):
Intel(R) Core(TM) i5-7300HQ
HD Graphics 630
GeForce GTX 1050 Mobile (disabled)
16 GiB DDR4
Samsung NVMe SSD + 1TB HDDExpected behavior:
Backlight should be adjustable viaintel_backlightoracpi_video0, as in kernel 6.17.Observed behavior:
Backlight remains at maximum brightness regardless of ACPI events or brightness keys.Steps to reproduce:
1. Boot kernel 7.0.0‑28‑generic
2. Attempt to change brightness
3. Backlight does not changeThis appears to be an ACPI/i915 regression introduced in kernel 7.0.
Thank you for your work.
Rafael J. Wysocki (Intel)
maintainerQuoted 10 lines · Thorsten Leemhuis
Quoted 4 lines · harryblanc
I would like to report a regression affecting backlight control on my HP Omen laptop when using kernel 7.0.0‑28‑generic (Ubuntu 24.04 base, Linux Mint 22.3 XFCE).
Hi! Thx for your report. But this is a heavily patched vendor kernel and also a series that is EOL. Please test latest vanilla 7.2-rc or and report back. Ciao, Thorsten
I was about to ask for that too, so thanks for mentioning it.
Quoted 17 lines
Quoted 17 lines
Summary of the issue:
With kernel 7.0, the screen backlight is stuck at maximum brightness. Brightness keys show the OSD and the slider moves, but the actual backlight does not change.
With kernel 6.17, brightness works normally.Hardware:
- HP Omen 15‑ax246nf
- Intel i5‑7300HQ
- Intel HD Graphics 630 (i915)
- Nvidia GTX 1050 Mobile (disabled via Optimus)
- Linux Mint 22.3 XFCE (Ubuntu 24.04 base)Backlight controller:
/sys/class/backlight/→intel_backlightacpi_video0is no longer present under kernel 7.0.
Quoted 6 lines
Quoted 6 lines
ACPI errors visible only with kernel 7.0:
ACPI BIOS Error (bug): Attempt to CreateField of length zero ACPI Error: Aborting method \_SB.WMID.WQBK
ACPI BIOS Error (bug):AE_AML_BUFFER_LIMIT
ACPI Error: Aborting method \_SB.WMID.HWMC
ACPI: video: [Firmware Bug]: ACPI(PEGP) defines_DODbut not_DOS
So it looks like 7.0 uses a different ACPI object as the video bus representation.
Please send the output of "ls -l /sys/bus/auxiliary/devices/*/" from the failing kernel.
If you are still able to boot the 6.17-based kernel on the affected machine, please send the output of "ls -l /sys/bus/acpi/drivers/video/" obtained while it is running.
*Subject:* Re: Regression: Backlight control broken on HP Omen 15‑ax246nf with kernel 7.0.x
Hello Rafael, Thorsten,
Here are the outputs you requested, from both the working kernel (6.17.0‑42) and the failing one (7.0.0‑29).
For context:
*
Secure Boot is *disabled* on this machine.
*
GPU setup is *Optimus with NVIDIA GTX 1050 “on‑demand” mode* (Intel iGPU is primary).
*
These changes do not affect the issue: the backlight regression remains exactly the same on kernel 7.0.29.
*
Kernel 6.17.0‑42 (backlight working normally)
*
$ ls -l /sys/bus/acpi/drivers/video/ total 0 --w------- 1 root root 4096 août 18 14:50 bind lrwxrwxrwx 1 root root 0 août 18 14:50 LNXVIDEO:00 -> ../../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00 lrwxrwxrwx 1 root root 0 août 18 14:50 LNXVIDEO:01 -> ../../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01 lrwxrwxrwx 1 root root 0 août 18 14:43 module -> ../../../../module/video --w------- 1 root root 4096 août 18 14:50 uevent --w------- 1 root root 4096 août 18 14:50 unbind
*
The ACPI video driver attaches normally, and backlight control works as expected.
*
Kernel 7.0.0‑29 (backlight stuck at maximum)
*
$ ls -l /sys/bus/auxiliary/devices/*/
/sys/bus/auxiliary/devices/acpi.video_bus.0/:
driver -> ../../../../bus/auxiliary/drivers/video firmware_node -> ../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00 input/
power/
subsystem -> ../../../../bus/auxiliary
uevent
/sys/bus/auxiliary/devices/acpi.video_bus.1/:
driver -> ../../../bus/auxiliary/drivers/video firmware_node -> ../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01 input/
power/
subsystem -> ../../../bus/auxiliary
uevent
*
On kernel 7.0.x, the ACPI video devices are no longer bound under
|/sys/bus/acpi/drivers/video/|. Instead, they appear under the *auxiliary bus* (|acpi.video_bus.*|). As a result:
*
|acpi_video0| disappears
*
only |intel_backlight| remains
*
brightness keys move the slider, but the actual backlight does not change
*
ACPI errors appear in dmesg (CreateField length zero, AE_AML_BUFFER_LIMIT, WMID failures)
This matches the regression I initially reported.
If you need additional logs (ACPI, i915, auxiliary bus traces), I can provide them.
Best regards, Harry
*
Le 18/07/2026 à 11:05, harryblanc a écrit :
Quoted 58 lines
Hello,
I would like to report a regression affecting backlight control on my HP Omen laptop when using kernel 7.0.0‑28‑generic (Ubuntu 24.04 base, Linux Mint 22.3 XFCE).
Summary of the issue:
With kernel 7.0, the screen backlight is stuck at maximum brightness. Brightness keys show the OSD and the slider moves, but the actual backlight does not change. With kernel 6.17, brightness works normally.Hardware:
- HP Omen 15‑ax246nf
- Intel i5‑7300HQ
- Intel HD Graphics 630 (i915)
- Nvidia GTX 1050 Mobile (disabled via Optimus)
- Linux Mint 22.3 XFCE (Ubuntu 24.04 base)Backlight controller:
/sys/class/backlight/→intel_backlightacpi_video0is no longer present under kernel 7.0.ACPI errors visible only with kernel 7.0:
ACPI BIOS Error (bug): Attempt to CreateField of length zero ACPI Error: Aborting method \_SB.WMID.WQBK
ACPI BIOS Error (bug):AE_AML_BUFFER_LIMIT
ACPI Error: Aborting method \_SB.WMID.HWMC
ACPI: video: [Firmware Bug]: ACPI(PEGP) defines_DODbut not_DOSKernel version:
Linux 7.0.0-28-generic #28~24.04.1-Ubuntu SMPPREEMPT_DYNAMICWed Jul 1 15:50:57 UTC 2024x86_64GNU/LinuxGPU information (inxi -Gxxx):
Device-1: Intel HD Graphics 630 driver: i915
Device-2: NVIDIA GTX 1050 Mobile driver: N/A (Optimus disabled)
Display: X11 driver: modesetting, iris
Monitor: eDP-1 1920x1080 LG DisplayHardware summary (lshw -short):
Intel(R) Core(TM) i5-7300HQ
HD Graphics 630
GeForce GTX 1050 Mobile (disabled)
16 GiB DDR4
Samsung NVMe SSD + 1TB HDDExpected behavior:
Backlight should be adjustable viaintel_backlightoracpi_video0, as in kernel 6.17.Observed behavior:
Backlight remains at maximum brightness regardless of ACPI events or brightness keys.Steps to reproduce:
1. Boot kernel 7.0.0‑28‑generic
2. Attempt to change brightness
3. Backlight does not changeThis appears to be an ACPI/i915 regression introduced in kernel 7.0.
Thank you for your work.
Rafael J. Wysocki (Intel)
maintainerQuoted 75 lines · harryblanc
*Subject:* Re: Regression: Backlight control broken on HP Omen 15‑ax246nf with kernel 7.0.x
Hello Rafael, Thorsten,
Here are the outputs you requested, from both the working kernel (6.17.0‑42) and the failing one (7.0.0‑29).
For context:
*
Secure Boot is *disabled* on this machine.
*
GPU setup is *Optimus with NVIDIA GTX 1050 “on‑demand” mode* (Intel iGPU is primary).
*
These changes do not affect the issue: the backlight regression remains exactly the same on kernel 7.0.29.
*
Kernel 6.17.0‑42 (backlight working normally)
*
$ ls -l /sys/bus/acpi/drivers/video/ total 0 --w------- 1 root root 4096 août 18 14:50 bind lrwxrwxrwx 1 root root 0 août 18 14:50 LNXVIDEO:00 -> ../../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00 lrwxrwxrwx 1 root root 0 août 18 14:50 LNXVIDEO:01 -> ../../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01 lrwxrwxrwx 1 root root 0 août 18 14:43 module -> ../../../../module/video --w------- 1 root root 4096 août 18 14:50 uevent --w------- 1 root root 4096 août 18 14:50 unbind*
The ACPI video driver attaches normally, and backlight control works as expected.
*
Kernel 7.0.0‑29 (backlight stuck at maximum)
*
$ ls -l /sys/bus/auxiliary/devices/*//sys/bus/auxiliary/devices/acpi.video_bus.0/: driver -> ../../../../bus/auxiliary/drivers/video firmware_node -> ../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00 input/ power/ subsystem -> ../../../../bus/auxiliary uevent /sys/bus/auxiliary/devices/acpi.video_bus.1/: driver -> ../../../bus/auxiliary/drivers/video firmware_node -> ../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01 input/ power/ subsystem -> ../../../bus/auxiliary uevent*
Quoted 7 lines
On kernel 7.0.x, the ACPI video devices are no longer bound under |/sys/bus/acpi/drivers/video/|. Instead, they appear under the *auxiliary bus* (|acpi.video_bus.*|). As a result:
*
|acpi_video0| disappears
Well, this is not supposed to happen regardless.
The (auxiliary) video driver binds to both devices and it uses the same platform firmware interfaces as before.
It should register the backlight interface for one of them, but that doesn't happen for some reason, probably related to the ACPI error messages you see when running 7.0.x.
Quoted 12 lines
*
only |intel_backlight| remains
*
brightness keys move the slider, but the actual backlight does not change
*
Quoted 7 lines
ACPI errors appear in dmesg (CreateField length zero,
AE_AML_BUFFER_LIMIT, WMID failures)This matches the regression I initially reported.
If you need additional logs (ACPI, i915, auxiliary bus traces), I can provide them.
Please boot the working 6.17.0‑42 kernel again, do
$ ls -l /sys/class/backlight
while running it and send the output of that command.
Also please send boot logs (the output of dmesg after a fresh boot) from both the working (6.17.0‑42) and failing (7.0.0‑29) kernels.
Thanks!