rteval: Add relative cpulists for loads
PATCH v2 1/1 rteval: Add relative cpulists for loads
From: Tomas Glozar <[email protected]>
Relative cpulists were added for measurements in 64ce7848 ("rteval: Add relative cpulists for measurements"). It was observed since that this feature would also be useful for load cpulists, for example when the measurements are performed externally and rteval is only used to run loads.
Add support for relative cpulists also for loads. This works the same way as for measurements using parse_cpulist_from_config, only difference is there is no --loads-run-on-isolcpus option. That is, --loads-cpulist now also takes lists with addition (+) and removal (-) of CPUs against the default list, e.g. +0,1,-7,8.
--- rteval-cmd | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
rteval-cmd +10 -7
@@ -339,29 +339,32 @@ if __name__ == '__main__': ldcfg = config.GetSection('loads') msrcfg = config.GetSection('measurement') + # Remember if cpulists were explicitly set by the user before running + # parse_cpulist_from_config, which generates default value for them msrcfg_cpulist_present = msrcfg.cpulist != "" - # Parse measurement cpulist using parse_cpulist_from_config to account for run-on-isolcpus - # and relative cpusets + ldcfg_cpulist_present = ldcfg.cpulist != "" + # Parse cpulists using parse_cpulist_from_config to account for + # run-on-isolcpus and relative cpusets cpulist = parse_cpulist_from_config(msrcfg.cpulist, msrcfg.run_on_isolcpus) if msrcfg_cpulist_present and not cpulist_utils.is_relative(msrcfg.cpulist) and msrcfg.run_on_isolcpus: logger.log(Log.WARN, "ignoring --measurement-run-on-isolcpus, since cpulist is specified") msrcfg.cpulist = collapse_cpulist(cpulist) - if ldcfg.cpulist: - ldcfg.cpulist = remove_offline(ldcfg.cpulist) + cpulist = parse_cpulist_from_config(ldcfg.cpulist) + ldcfg.cpulist = collapse_cpulist(cpulist) # if we only specified one set of cpus (loads or measurement) # default the other to the inverse of the specified list - if not ldcfg.cpulist and msrcfg_cpulist_present: + if not ldcfg_cpulist_present and msrcfg_cpulist_present: tmplist = expand_cpulist(msrcfg.cpulist) tmplist = SysTopology().invert_cpulist(tmplist) tmplist = cpulist_utils.online_cpulist(tmplist) ldcfg.cpulist = collapse_cpulist(tmplist) - if not msrcfg_cpulist_present and ldcfg.cpulist: + if not msrcfg_cpulist_present and ldcfg_cpulist_present: tmplist = expand_cpulist(ldcfg.cpulist) tmplist = SysTopology().invert_cpulist(tmplist) tmplist = cpulist_utils.online_cpulist(tmplist) msrcfg.cpulist = collapse_cpulist(tmplist) - if ldcfg.cpulist: + if ldcfg_cpulist_present: logger.log(Log.DEBUG, f"loads cpulist: {ldcfg.cpulist}") # if --onlyload is specified msrcfg.cpulist is unused if msrcfg_cpulist_present and not rtevcfg.onlyload:
Signature · 1 line
2.44.0
Quoted 54 lines · On Thu, 4 Apr 2024, [email protected] wrote:
From: Tomas Glozar <[email protected]>
Relative cpulists were added for measurements in
64ce7848("rteval: Add relative cpulists for measurements"). It was observed since that this feature would also be useful for load cpulists, for example when the measurements are performed externally and rteval is only used to run loads.Add support for relative cpulists also for loads. This works the same way as for measurements using
parse_cpulist_from_config, only difference is there is no --loads-run-on-isolcpus option. That is, --loads-cpulist now also takes lists with addition (+) and removal (-) of CPUs against the default list, e.g. +0,1,-7,8.Signed-off-by Tomas Glozar <[email protected]>--- rteval-cmd | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)rteval-cmd +9
-6@@ -339,29 +339,32 @@ if __name__ == '__main__': ldcfg = config.GetSection('loads') msrcfg = config.GetSection('measurement') + # Remember if cpulists were explicitly set by the user before running + # parse_cpulist_from_config, which generates default value for them msrcfg_cpulist_present = msrcfg.cpulist != "" - # Parse measurement cpulist using parse_cpulist_from_config to account for run-on-isolcpus - # and relative cpusets + ldcfg_cpulist_present = ldcfg.cpulist != "" + # Parse cpulists using parse_cpulist_from_config to account for + # run-on-isolcpus and relative cpusets cpulist = parse_cpulist_from_config(msrcfg.cpulist, msrcfg.run_on_isolcpus) if msrcfg_cpulist_present and not cpulist_utils.is_relative(msrcfg.cpulist) and msrcfg.run_on_isolcpus: logger.log(Log.WARN, "ignoring --measurement-run-on-isolcpus, since cpulist is specified") msrcfg.cpulist = collapse_cpulist(cpulist) - if ldcfg.cpulist: - ldcfg.cpulist = remove_offline(ldcfg.cpulist) + cpulist = parse_cpulist_from_config(ldcfg.cpulist) + ldcfg.cpulist = collapse_cpulist(cpulist) # if we only specified one set of cpus (loads or measurement) # default the other to the inverse of the specified list - if not ldcfg.cpulist and msrcfg_cpulist_present: + if not ldcfg_cpulist_present and msrcfg_cpulist_present: tmplist = expand_cpulist(msrcfg.cpulist) tmplist = SysTopology().invert_cpulist(tmplist) tmplist = cpulist_utils.online_cpulist(tmplist) ldcfg.cpulist = collapse_cpulist(tmplist) - if not msrcfg_cpulist_present and ldcfg.cpulist: + if not msrcfg_cpulist_present and ldcfg_cpulist_present:
rteval-cmd if __name__ == '__main__': · line 370
Quoted 10 lines
rteval-cmd +1
-1tmplist = expand_cpulist(ldcfg.cpulist) tmplist = SysTopology().invert_cpulist(tmplist) tmplist = cpulist_utils.online_cpulist(tmplist) msrcfg.cpulist = collapse_cpulist(tmplist) - if ldcfg.cpulist: + if ldcfg_cpulist_present: logger.log(Log.DEBUG, f"loads cpulist: {ldcfg.cpulist}") # if --onlyload is specified msrcfg.cpulist is unused if msrcfg_cpulist_present and not rtevcfg.onlyload: