Skip to contentSkip to conversation

mailbox: mtk-cmdq: fix runtime PM usage counter leak in cmdq_mbox_flush

PATCH Superseded Manush Prajwal 2 participants 2 messages Aug 24 – Aug 25

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mailbox: mtk-cmdq: fix runtime PM usage counter leak in cmdq_mbox_flush

cmdq_mbox_flush() calls pm_runtime_get_sync() and returns its error code directly on failure. Per Documentation/power/runtime_pm.rst, pm_runtime_get_sync() does not drop the usage counter on error, so the caller is expected to release the reference itself. The early return here skipped that, leaking a runtime PM usage count on cmdq->mbox.dev on every failed resume. v2 fixed this by switching to pm_runtime_resume_and_get(), which performs the get-and-put internally on failure.

Markus Elfring additionally pointed out that the "out:" and "wait:" labels duplicate the same pm_runtime_mark_last_busy() + pm_runtime_put_autosuspend() + return sequence. That duplication hides a second, separate leak: the "wait:" path's timeout branch (readl_poll_timeout_atomic() failing) returns -EFAULT directly, without ever calling pm_runtime_mark_last_busy() / pm_runtime_put_autosuspend(), so the pm_runtime reference taken at function entry is leaked on every polling timeout too.

Fix both by merging the two exit sequences into one common "out_pm:" label reached by both "out:" and "wait:", using "ret" to carry the return value. "ret" is explicitly reset to 0 on both success paths before reaching "out_pm:", since pm_runtime_resume_and_get() can return a positive value (e.g. 1) on success, not just 0, and that stale value must not leak into the function's return value.

---
v3: Fix the pm_runtime leak on the "wait:" timeout path found while
addressing Markus Elfring's duplicate-code comment, by merging the "out:" and "wait:" exit sequences into a single "out_pm:" label. Add Matthias Brugger and AngeloGioacchino Del Regno plus the linux-mediatek and linux-arm-kernel lists to Cc, per MAINTAINERS' "ARM/Mediatek SoC support" entry (matches any drivers/mailbox/mtk-*.c filename), per Markus Elfring's review.
v2: Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
plus a manual pm_runtime_put_noidle() on the error path, per Markus Elfring's review.

 drivers/mailbox/mtk-cmdq-mailbox.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/mailbox/mtk-cmdq-mailbox.c +7 -8
index e523c84b4..d4e5f6a7b 100644
@@ -565,7 +565,7 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 	int ret;
 
-	ret = pm_runtime_get_sync(cmdq->mbox.dev);
+	ret = pm_runtime_resume_and_get(cmdq->mbox.dev);
 	if (ret < 0)
 		return ret;
 
@@ -590,22 +590,21 @@ static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 	cmdq_thread_disable(cmdq, thread);
 
 out:
 	spin_unlock_irqrestore(&thread->chan->lock, flags);
-	pm_runtime_mark_last_busy(cmdq->mbox.dev);
-	pm_runtime_put_autosuspend(cmdq->mbox.dev);
-
-	return 0;
+	ret = 0;
+	goto out_pm;
 
 wait:
 	cmdq_thread_resume(thread);
 	spin_unlock_irqrestore(&thread->chan->lock, flags);
+	ret = 0;
 	if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_ENABLE_TASK,
 				      enable, enable == 0, 1, timeout)) {
 		dev_err(cmdq->mbox.dev, "Fail to wait GCE thread 0x%x done\n",
 			(u32)(thread->base - cmdq->base));
-
-		return -EFAULT;
+		ret = -EFAULT;
 	}
+
+out_pm:
 	pm_runtime_mark_last_busy(cmdq->mbox.dev);
 	pm_runtime_put_autosuspend(cmdq->mbox.dev);
-	return 0;

+ return ret;
}
--
2.46.2.windows.1

#1 lore raw
Quoted 2 lines

cmdq_mbox_flush() calls pm_runtime_get_sync() and returns its error code directly on failure. …

Can it be helpful to append parentheses also to a function name in the summary phrase?

Regards,
Markus