asha: use robust streaming connection parameters
RFC PATCH 1/1 asha: use robust streaming connection parameters
The tested renderer requests a six-second supervision timeout and latency of five events. Use these values instead of the one-second timeout and ten-event latency that accompanied link failures.
---
Submission review notes (not part of the commit message):
Local validation is for base 7428ca2df9356363079db0f48412c20cbdb9471f. Compatibility with newer upstream tips has not been verified locally. October 9 N8/UB500 trials independently restore timeout 1 s and latency
10. Completed HCI values change as intended; the variants have five and four supervision timeouts respectively. Restoring latency 5 / timeout 6 s restores short streaming. These are device-tested values, not universally optimal ASHA defaults. STATUS and the other downstream fixes stayed on.
profiles/audio/asha.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
profiles/audio/asha.c +5 -4
@@ -50,6 +50,9 @@#define ASHA_MIN_MTU 163/* The default of 672 does not work */ #define ASHA_CONNECTION_MTU 512 +#define ASHA_CONN_INTERVAL 0x0010/* 20 ms in 1.25 ms units */ +#define ASHA_CONN_LATENCY 0x0005 +#define ASHA_SUPERVISION_TIMEOUT 0x0258/* 6 s in 10 ms units */ struct bt_asha_device {struct bt_asha *asha;
@@ -162,10 +165,8 @@ unsigned int bt_asha_device_start(struct bt_asha_device *asha_dev,int ret;btd_device_set_conn_param (asha_dev->device, -0x0010 /* min interval = 1.25ms intervals => 20ms */ , -0x0010 /* max interval = 1.25ms intervals => 20ms */ , -0x000A /* 10 events' latency */ , -0x0064 /* 1s timeout */ ); +ASHA_CONN_INTERVAL ,ASHA_CONN_INTERVAL , +ASHA_CONN_LATENCY ,ASHA_SUPERVISION_TIMEOUT ); ret =asha_connect_socket (asha_dev, cb, user_data);
base-commit: 7428ca2df9356363079db0f48412c20cbdb9471f
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1184361/
---Test result---
Test Summary:
CheckPatch PASS 0.29 seconds GitLint PASS 0.21 seconds BuildEll PASS 19.27 seconds BluezMake PASS 292.49 seconds MakeCheck PASS 3.24 seconds MakeDistcheck PASS 140.71 seconds CheckValgrind PASS 150.03 seconds CheckSmatch PASS 289.97 seconds bluezmakeextell PASS 94.02 seconds TestFunctional FAIL 1155.62 seconds IncrementalBuild PASS 292.11 seconds ScanBuild PASS 1116.24 seconds
Details
##############################
Test: TestFunctional - FAIL
Desc: Run test-functional
Output:
FAIL functional.test_hog::test_hog[sci-hosts18-vm2]: pytest_bluezenv.rpc.RemoteTimeoutError: Connection recv timed out
https://github.com/bluez/bluez/pull/2667
---
Regards,
Linux Bluetooth
Could the failed TestFunctional CI check for this patch be reran? The matching checks pass locally.
CI: https://github.com/bluez/bluez/pull/2667
Quoted 48 lines · Kyle Pepper
The tested renderer requests a six-second supervision timeout and latency of five events. Use these values instead of the one-second timeout and ten-event latency that accompanied link failures.
Assisted-by OpenCode:gpt-6.1-sol---
Submission review notes (not part of the commit message):
Local validation is for base7428ca2df9356363079db0f48412c20cbdb9471f. Compatibility with newer upstream tips has not been verified locally. October 9 N8/UB500 trials independently restore timeout 1 s and latency
10. Completed HCI values change as intended; the variants have five and four supervision timeouts respectively. Restoring latency 5 / timeout 6 s restores short streaming. These are device-tested values, not universally optimal ASHA defaults. STATUS and the other downstream fixes stayed on.profiles/audio/asha.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)profiles/audio/asha.c +5
-4@@ -50,6 +50,9 @@#define ASHA_MIN_MTU 163/* The default of 672 does not work */ #define ASHA_CONNECTION_MTU 512 +#define ASHA_CONN_INTERVAL 0x0010/* 20 ms in 1.25 ms units */ +#define ASHA_CONN_LATENCY 0x0005 +#define ASHA_SUPERVISION_TIMEOUT 0x0258/* 6 s in 10 ms units */ struct bt_asha_device {struct bt_asha *asha;@@ -162,10 +165,8 @@ unsigned int bt_asha_device_start(struct bt_asha_device *asha_dev,int ret;btd_device_set_conn_param (asha_dev->device, -0x0010 /* min interval = 1.25ms intervals => 20ms */ , -0x0010 /* max interval = 1.25ms intervals => 20ms */ , -0x000A /* 10 events' latency */ , -0x0064 /* 1s timeout */ ); +ASHA_CONN_INTERVAL ,ASHA_CONN_INTERVAL , +ASHA_CONN_LATENCY ,ASHA_SUPERVISION_TIMEOUT ); ret =asha_connect_socket (asha_dev, cb, user_data);base-commit:
7428ca2df9356363079db0f48412c20cbdb9471f
This is an automated email and please do not reply to this email.
Dear Submitter,
This series was picked up by the CI more than 2 weeks ago and the pull request created for it is still open, which means the series was never applied to the tree.
Series: [RFC] asha: use robust streaming connection parameters
Pull Request: https://github.com/bluez/bluez/pull/2667
Created: 2026-10-13 04:00:24+00:00
The pull request has been closed and no further action is taken on this series.
If the change should still be considered, it must be resent to the Linux Bluetooth mailing list ([email protected]) so that it is picked up again.
---
Regards,
Linux Bluetooth