Support PTR_MAYBE_NULL for struct_ops arguments.
Subsystems (5)
v4 cover Support PTR_MAYBE_NULL for struct_ops arguments.
From: Kui-Feng Lee <[email protected]>
With this RFC, I specifically need comments/feeback on the part 2. It extends PTR_TO_BTF_ID to support pointers to scalar types, enum types, pointer types and array types. The purpose of extending PTR_TO_BTF_ID is to support pointers to non-struct types as nullable arguments of BPF struct_ops programs. Is it a good way to do it? Other options?
Allow passing null pointers to the operators provided by a struct_ops object. This is an RFC to collect feedbacks/opinions.
The previous discussions against v1 came to the conclusion that the developer should did it in ".is_valid_access". However, recently, kCFI for struct_ops has been landed. We found it is possible to provide a generic way to annotate arguments by adding a suffix after argument names of stub functions. So, this RFC is resent to present the new idea.
The function pointers that are passed to struct_ops operators (the function pointers) are always considered reliable until now. They cannot be null. However, in certain scenarios, it should be possible to pass null pointers to these operators. For instance, sched_ext may pass a null pointer in the struct task type to an operator that is provided by its struct_ops objects.
The proposed solution here is to add PTR_MAYBE_NULL annotations to arguments and create instances of struct bpf_ctx_arg_aux (arg_info) for these arguments. These arg_infos will be installed at prog->aux->ctx_arg_info and will be checked by the BPF verifier when loading the programs. When a struct_ops program accesses arguments in the ctx, the verifier will call btf_ctx_access() (through bpf_verifier_ops->is_valid_access) to verify the access. btf_ctx_access() will check arg_info and use the information of the matched arg_info to properly set reg_type.
For nullable arguments, this patch sets an arg_info to label them with PTR_TO_BTF_ID | PTR_TRUSTED | PTR_MAYBE_NULL. This enforces the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before reading/writing the pointed memory.
The implementer of a struct_ops should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, for test_maybe_null of struct bpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function. Here is the example in bpf_testmod.c.
static int bpf_testmod_ops__test_maybe_null(int dummy,
struct task_struct *task__nullable,
u32 *scalar__nullable,
u32 (*ar__nullable)[2],
u32 (*ar2__nullable)[])
{
return 0;
}This means that the argument 1 (2nd) of bpf_testmod_ops->test_maybe_null, which is a function pointer that can be null. With this annotation, the verifier will understand how to check programs using this arguments. A BPF program that implement test_maybe_null should check the pointer to make sure it is not null before using it. For example,
if (task__nullable)
save_tgid = task__nullable->tgid
Without the check, the verifier will reject the program.
Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions without nullable arguments, stub functions are not necessary for the purpose of this patch.
---
Major changes from v3:
- Move the code collecting argument information to prepare_arg_info() called in the loop in bpf_struct_ops_desc_init().
- Simplify the memory allocation by having separated arg_info for each member of a struct_ops type.
- Extend PTR_TO_BTF_ID to pointers to scalar types and array types, not only to struct types.
Major changes from v2:
- Remove dead code.
- Add comments to explain the code itself.
Major changes from v1:
- Annotate arguments by suffixing argument names with "__nullable" at stub functions.
v3: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
Kui-Feng Lee (6):
bpf: Allow PTR_TO_BTF_ID even for pointers to int.
bpf: Extend PTR_TO_BTF_ID to handle pointers to scalar and array
types.
bpf: Remove an unnecessary check.
bpf: add btf pointer to struct bpf_ctx_arg_aux.
bpf: Create argument information for nullable arguments. selftests/bpf: Test PTR_MAYBE_NULL arguments of struct_ops operators.
include/linux/bpf.h | 18 ++ kernel/bpf/bpf_struct_ops.c | 185 ++++++++++++++++-- kernel/bpf/btf.c | 83 +++++++- kernel/bpf/verifier.c | 6 + .../selftests/bpf/bpf_testmod/bpf_testmod.c | 23 ++- .../selftests/bpf/bpf_testmod/bpf_testmod.h | 10 + .../prog_tests/test_struct_ops_maybe_null.c | 61 ++++++ .../bpf/progs/struct_ops_maybe_null.c | 41 ++++ .../bpf/progs/struct_ops_maybe_null_fail.c | 98 ++++++++++ 9 files changed, 500 insertions(+), 25 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/test_struct_ops_maybe_null.c create mode 100644 tools/testing/selftests/bpf/progs/struct_ops_maybe_null.c create mode 100644 tools/testing/selftests/bpf/progs/struct_ops_maybe_null_fail.c
Signature · 1 line
2.34.1
RFC v4 1/6 bpf: Allow PTR_TO_BTF_ID even for pointers to int.
From: Kui-Feng Lee <[email protected]>
Pointers to int are always accepted when checking accesses of a context in btf_ctx_access(). However, we are going to support pointers to scalar types with PTR_TO_BTF_ID. Changing the order of checking prog->aux->ctx_arg_info and checking is_int_ptr() enables the extension in the following patches.
--- kernel/bpf/btf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
kernel/bpf/btf.c +3 -3
@@ -6252,9 +6252,6 @@ bool btf_ctx_access(int off, int size, enum bpf_access_type type,*/ return true; -if (is_int_ptr (btf, t)) -return true; -/* this is a pointer to another type */ for (i =0 ; i < prog->aux->ctx_arg_info_size; i++) {const struct bpf_ctx_arg_aux *ctx_arg_info = &prog->aux->ctx_arg_info[i];
@@ -6272,6 +6269,9 @@ bool btf_ctx_access(int off, int size, enum bpf_access_type type, } } +if (is_int_ptr (btf, t)) +return true; + info->reg_type =PTR_TO_BTF_ID ;if (prog_args_trusted (prog)) info->reg_type |=PTR_TRUSTED ;
Signature · 1 line
2.34.1
RFC v4 2/6 bpf: Extend PTR_TO_BTF_ID to handle pointers to scalar and array types.
In reply to [email protected]From: Kui-Feng Lee <[email protected]>
The verifier calls btf_struct_access() to check the access for PTR_TO_BTF_ID. btf_struct_access() supported only pointer to struct types (including union). We add the support of scalar types and array types.
btf_reloc_array_access() is responsible for relocating the access from the whole array to an element in the array. That means to adjust the offset relatively to the start of an element and change the type to the type of the element. With this relocation, we can check the access against the element type instead of the array type itself.
After relocation, the struct types, including union types, will continue the loop of btf_struct_walk(). Other types are treated as scalar types, including pointers, and return from btf_struct_access().
--- kernel/bpf/btf.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)
kernel/bpf/btf.c +61 -0
@@ -6590,6 +6590,61 @@ static int btf_struct_walk(struct bpf_verifier_log *log, const struct btf *btf,return -EINVAL ; } +/* Relocate the access relatively to the beginning of an element in an +* array. +* +* The offset is adjusted relatively to the beginning of the element and the +* type is adjusted to the type of the element. +* +* Return NULL for scalar, enum, and pointer type. +* Return a btf_type pointer for struct and union. +*/ +static const struct btf_type * +btf_reloc_array_access (struct bpf_verifier_log *log,const struct btf *btf, +const struct btf_type *t,int *off,int size) +{ +const struct btf_type *rt, *elem_type; +u32 rt_size, elem_id, total_nelems, rt_id, elem_size; +u32 elem_idx; + + rt =__btf_resolve_size (btf, t, &rt_size, &elem_type, &elem_id, + &total_nelems, &rt_id); +if (IS_ERR (rt)) +return rt; +if (btf_type_is_array (rt)) { +if (*off >= rt_size) { +bpf_log (log,"access out of range of type %s with offset %d and size %u\n" , +__btf_name_by_offset (btf, t->name_off), *off, rt_size); +return ERR_PTR (-EACCES ); + } + +/* Multi-dimensional arrays are flattened by +* __btf_resolve_size(). Check the comment in +* btf_struct_walk(). +*/ + elem_size = rt_size / total_nelems; + elem_idx = *off / elem_size; +/* Relocate the offset relatively to the start of the +* element at elem_idx. +*/ + *off -= elem_idx * elem_size; + rt = elem_type; + rt_size = elem_size; + } + +if (btf_type_is_struct (rt)) +return rt; + +if (*off + size > rt_size) { +bpf_log (log,"access beyond the range of type %s with offset %d and size %d\n" , +__btf_name_by_offset (btf, rt->name_off), *off, size); +return ERR_PTR (-EACCES ); + } + +/* The access is accepted as a scalar. */ +return NULL ; +} + int btf_struct_access(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size, enum bpf_access_type atype __maybe_unused,
@@ -6625,6 +6680,12 @@ int btf_struct_access(struct bpf_verifier_log *log, } t =btf_type_by_id (btf, id); + t =btf_reloc_array_access (log, btf, t, &off, size); +if (IS_ERR (t)) +return PTR_ERR (t); +if (!t) +return SCALAR_VALUE ; + do { err = btf_struct_walk(log, btf, t, off, size, &id, &tmp_flag, field_name);
Signature · 1 line
2.34.1
Martin KaFai Lau
reviewerRe: [RFC bpf-next v4 2/6] bpf: Extend PTR_TO_BTF_ID to handle pointers to scalar and array types.
Quoted 12 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
The verifier calls
btf_struct_access()to check the access forPTR_TO_BTF_ID.btf_struct_access()supported only pointer to struct types (including union). We add the support of scalar types and array types.
btf_reloc_array_access()is responsible for relocating the access from the whole array to an element in the array. That means to adjust the offset relatively to the start of an element and change the type to the type of the element. With this relocation, we can check the access against the element type instead of the array type itself.
Quoted 3 lines
After relocation, the struct types, including union types, will continue the loop of
btf_struct_walk(). Other types are treated as scalar types, including pointers, and return frombtf_struct_access().
Unless there is an immediate use case to support PTR_MAYBE_NULL on a non-struct pointer, I would suggest to separate the other pointer type support from the current PTR_MAYBE_NULL feature patchset. afaik, they are orthogonal.
Quoted 85 lines
Signed-off-by Kui-Feng Lee <[email protected]>--- kernel/bpf/btf.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)kernel/bpf/btf.c +61
-0@@ -6590,6 +6590,61 @@ static int btf_struct_walk(struct bpf_verifier_log *log, const struct btf *btf,return -EINVAL ; } +/* Relocate the access relatively to the beginning of an element in an +* array. +* +* The offset is adjusted relatively to the beginning of the element and the +* type is adjusted to the type of the element. +* +* Return NULL for scalar, enum, and pointer type. +* Return a btf_type pointer for struct and union. +*/ +static const struct btf_type * +btf_reloc_array_access (struct bpf_verifier_log *log,const struct btf *btf, +const struct btf_type *t,int *off,int size) +{ +const struct btf_type *rt, *elem_type; +u32 rt_size, elem_id, total_nelems, rt_id, elem_size; +u32 elem_idx; + + rt =__btf_resolve_size (btf, t, &rt_size, &elem_type, &elem_id, + &total_nelems, &rt_id); +if (IS_ERR (rt)) +return rt; +if (btf_type_is_array (rt)) { +if (*off >= rt_size) { +bpf_log (log,"access out of range of type %s with offset %d and size %u\n" , +__btf_name_by_offset (btf, t->name_off), *off, rt_size); +return ERR_PTR (-EACCES ); + } + +/* Multi-dimensional arrays are flattened by +* __btf_resolve_size(). Check the comment in +* btf_struct_walk(). +*/ + elem_size = rt_size / total_nelems; + elem_idx = *off / elem_size; +/* Relocate the offset relatively to the start of the +* element at elem_idx. +*/ + *off -= elem_idx * elem_size; + rt = elem_type; + rt_size = elem_size; + } + +if (btf_type_is_struct (rt)) +return rt; + +if (*off + size > rt_size) { +bpf_log (log,"access beyond the range of type %s with offset %d and size %d\n" , +__btf_name_by_offset (btf, rt->name_off), *off, size); +return ERR_PTR (-EACCES ); + } + +/* The access is accepted as a scalar. */ +return NULL ; +} + int btf_struct_access(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size, enum bpf_access_type atype __maybe_unused,@@ -6625,6 +6680,12 @@ int btf_struct_access(struct bpf_verifier_log *log, } t =btf_type_by_id (btf, id); + t =btf_reloc_array_access (log, btf, t, &off, size); +if (IS_ERR (t)) +return PTR_ERR (t); +if (!t) +return SCALAR_VALUE ; + do { err = btf_struct_walk(log, btf, t, off, size, &id, &tmp_flag, field_name);
Re: [RFC bpf-next v4 2/6] bpf: Extend PTR_TO_BTF_ID to handle pointers to scalar and array types.
Quoted 13 lines · Martin KaFai Lau
Quoted 12 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
The verifier calls
btf_struct_access()to check the access forPTR_TO_BTF_ID.btf_struct_access()supported only pointer to struct types (including union). We add the support of scalar types and array types.
btf_reloc_array_access()is responsible for relocating the access from the whole array to an element in the array. That means to adjust the offset relatively to the start of an element and change the type to the type of the element. With this relocation, we can check the access against the element type instead of the array type itself.
Quoted 5 lines
Quoted 3 lines
After relocation, the struct types, including union types, will continue the loop of
btf_struct_walk(). Other types are treated as scalar types, including pointers, and return frombtf_struct_access().Unless there is an immediate use case to support
PTR_MAYBE_NULLon a non-struct pointer, I would suggest to separate the other pointer type support from the currentPTR_MAYBE_NULLfeature patchset. afaik, they are orthogonal.
Totally agree!
Quoted 90 lines
Quoted 89 lines
Signed-off-by Kui-Feng Lee <[email protected]>---
kernel/bpf/btf.c| 61 ++++++++++++++++++++++++++++++++++++++++++++++++1 file changed, 61 insertions(+)kernel/bpf/btf.c +4
-0@@ -6590,6 +6590,61 @@ static int btf_struct_walk(struct bpf_verifier_log *log, const struct btf *btf, return -EINVAL; } +/* Relocate the access relatively to the beginning of an element in an +* array. +* +* The offset is adjusted relatively to the beginning of the element and the
+ * type is adjusted to the type of the element.
+ *
+ * Return NULL for scalar, enum, and pointer type.
+ * Return abtf_typepointer for struct and union.
+ */kernel/bpf/btf.c +2
-0+static const struct btf_type * +btf_reloc_array_access(struct bpf_verifier_log *log, const struct btf*btf,
+ const structbtf_type*t, int *off, int size)kernel/bpf/btf.c +12
-0+{ + const struct btf_type *rt, *elem_type; + u32 rt_size, elem_id, total_nelems, rt_id, elem_size; + u32 elem_idx; + + rt = __btf_resolve_size(btf, t, &rt_size, &elem_type, &elem_id, + &total_nelems, &rt_id); + if (IS_ERR(rt)) + return rt; + if (btf_type_is_array(rt)) { + if (*off >= rt_size) { + bpf_log(log, "access out of range of type %s with offset%d and size %u\n",
+__btf_name_by_offset(btf, t->name_off), *off,rt_size); + returnERR_PTR(-EACCES);
+ }kernel/bpf/btf.c +20
-0+ + /* Multi-dimensional arrays are flattened by + * __btf_resolve_size(). Check the comment in + * btf_struct_walk(). + */ + elem_size = rt_size / total_nelems; + elem_idx = *off / elem_size; + /* Relocate the offset relatively to the start of the + * element at elem_idx. + */ + *off -= elem_idx * elem_size; + rt = elem_type; + rt_size = elem_size; + } + + if (btf_type_is_struct(rt)) + return rt; + + if (*off + size > rt_size) { + bpf_log(log, "access beyond the range of type %s with offset%d and size %d\n",
+__btf_name_by_offset(btf, rt->name_off), *off, size); + returnERR_PTR(-EACCES);
+ }kernel/bpf/btf.c +5
-0+ + /* The access is accepted as a scalar. */ + return NULL; +} +int btf_struct_access(struct
bpf_verifier_log*log,
const structbpf_reg_state*reg,
int off, int size, enumbpf_access_typeatype__maybe_unused,kernel/bpf/btf.c +6
-0@@ -6625,6 +6680,12 @@ int btf_struct_access(struct bpf_verifier_log *log, } t = btf_type_by_id(btf, id); + t = btf_reloc_array_access(log, btf, t, &off, size); + if (IS_ERR(t)) + return PTR_ERR(t); + if (!t) + return SCALAR_VALUE; + do { err = btf_struct_walk(log, btf, t, off, size, &id, &tmp_flag, field_name);
RFC v4 3/6 bpf: Remove an unnecessary check.
In reply to [email protected]From: Kui-Feng Lee <[email protected]>
The "i" here is always equal to "btf_type_vlen(t)" since the "for_each_member()" loop never breaks.
--- kernel/bpf/bpf_struct_ops.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
kernel/bpf/bpf_struct_ops.c +9 -12
@@ -189,20 +189,17 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, } } -if (i ==btf_type_vlen (t)) { -if (st_ops->init (btf)) { -pr_warn ("Error in init bpf_struct_ops %s\n" , - st_ops->name); -return -EINVAL ; - }else { - st_ops_desc->type_id = type_id; - st_ops_desc->type = t; - st_ops_desc->value_id = value_id; - st_ops_desc->value_type =btf_type_by_id (btf, - value_id); - } +if (st_ops->init (btf)) { +pr_warn ("Error in init bpf_struct_ops %s\n" , + st_ops->name); +return -EINVAL ; } + st_ops_desc->type_id = type_id; + st_ops_desc->type = t; + st_ops_desc->value_id = value_id; + st_ops_desc->value_type =btf_type_by_id (btf, value_id); +return 0 ; }
Signature · 1 line
2.34.1
Martin KaFai Lau
reviewerRe: [RFC bpf-next v4 3/6] bpf: Remove an unnecessary check.
Quoted 4 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
The "i" here is always equal to "
btf_type_vlen(t)" since the "for_each_member()" loop never breaks.
It can be separated from the PTR_MAYBE_NULL support set. Please post this as its own patch without the RFC.
Quoted 39 lines
Signed-off-by Kui-Feng Lee <[email protected]>--- kernel/bpf/bpf_struct_ops.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)kernel/bpf/bpf_struct_ops.c +9
-12@@ -189,20 +189,17 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, } } -if (i ==btf_type_vlen (t)) { -if (st_ops->init (btf)) { -pr_warn ("Error in init bpf_struct_ops %s\n" , - st_ops->name); -return -EINVAL ; - }else { - st_ops_desc->type_id = type_id; - st_ops_desc->type = t; - st_ops_desc->value_id = value_id; - st_ops_desc->value_type =btf_type_by_id (btf, - value_id); - } +if (st_ops->init (btf)) { +pr_warn ("Error in init bpf_struct_ops %s\n" , + st_ops->name); +return -EINVAL ; } + st_ops_desc->type_id = type_id; + st_ops_desc->type = t; + st_ops_desc->value_id = value_id; + st_ops_desc->value_type =btf_type_by_id (btf, value_id); +return 0 ; }
Re: [RFC bpf-next v4 3/6] bpf: Remove an unnecessary check.
Quoted 7 lines · Martin KaFai Lau
Quoted 4 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
The "i" here is always equal to "
btf_type_vlen(t)" since the "for_each_member()" loop never breaks.It can be separated from the
PTR_MAYBE_NULLsupport set. Please post this as its own patch without the RFC.
Sure!
Quoted 38 lines
Quoted 37 lines
Signed-off-by Kui-Feng Lee <[email protected]>---
kernel/bpf/bpf_struct_ops.c| 21 +++++++++------------1 file changed, 9 insertions(+), 12 deletions(-)kernel/bpf/bpf_struct_ops.c +9
-12@@ -189,20 +189,17 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, } } - if (i == btf_type_vlen(t)) { - if (st_ops->init(btf)) { - pr_warn("Error in init bpf_struct_ops %s\n", - st_ops->name); - return -EINVAL; - } else { - st_ops_desc->type_id = type_id; - st_ops_desc->type = t; - st_ops_desc->value_id = value_id; - st_ops_desc->value_type = btf_type_by_id(btf, - value_id); - } + if (st_ops->init(btf)) { + pr_warn("Error in init bpf_struct_ops %s\n", + st_ops->name); + return -EINVAL; } + st_ops_desc->type_id = type_id; + st_ops_desc->type = t; + st_ops_desc->value_id = value_id; + st_ops_desc->value_type = btf_type_by_id(btf, value_id); + return 0; }
RFC v4 4/6 bpf: add btf pointer to struct bpf_ctx_arg_aux.
In reply to [email protected]From: Kui-Feng Lee <[email protected]>
Enable the providers to use types defined in a module instead of in the kernel (btf_vmlinux).
--- include/linux/bpf.h | 1 + kernel/bpf/btf.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
include/linux/bpf.h +1 -0
@@ -1416,6 +1416,7 @@ struct bpf_ctx_arg_aux {u32 offset;enum bpf_reg_type reg_type;u32 btf_id; +struct btf *btf; };struct btf_mod_pair {
kernel/bpf/btf.c +1 -1
@@ -6263,7 +6263,7 @@ bool btf_ctx_access(int off, int size, enum bpf_access_type type, } info->reg_type = ctx_arg_info->reg_type; - info->btf = btf_vmlinux; + info->btf = ctx_arg_info->btf ? ctx_arg_info->btf : btf_vmlinux; info->btf_id = ctx_arg_info->btf_id;return true; }
Signature · 1 line
2.34.1
RFC v4 5/6 bpf: Create argument information for nullable arguments.
In reply to [email protected]From: Kui-Feng Lee <[email protected]>
Collect argument information from the type information of stub functions to mark arguments of BPF struct_ops programs with PTR_MAYBE_NULL if they are nullable. A nullable argument is annotated by suffixing "__nullable" at the argument name of stub function.
For nullable arguments, this patch sets an arg_info to label their reg_type with PTR_TO_BTF_ID | PTR_TRUSTED | PTR_MAYBE_NULL. This makes the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before accessing the pointed memory.
The implementer of a struct_ops type should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, for test_maybe_null of struct bpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function.
Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions having not nullable arguments, stub functions are not necessary for the purpose of this patch.
This patch will prepare a list of struct bpf_ctx_arg_aux, aka arg_info, for each member field of a struct_ops type. "arg_info" will be assigned to "prog->aux->ctx_arg_info" of BPF struct_ops programs in check_struct_ops_btf_id() so that it can be used by btf_ctx_access() later to set reg_type properly for the verifier.
--- include/linux/bpf.h | 17 ++++ kernel/bpf/bpf_struct_ops.c | 166 ++++++++++++++++++++++++++++++++++-- kernel/bpf/btf.c | 14 +++ kernel/bpf/verifier.c | 6 ++ 4 files changed, 198 insertions(+), 5 deletions(-)
include/linux/bpf.h +17 -0
@@ -1709,6 +1709,19 @@ struct bpf_struct_ops {struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS ]; }; +/* Every member of a struct_ops type has an instance even the member is not +* an operator (function pointer). The "arg_info" field will be assigned to +* prog->aux->arg_info of BPF struct_ops programs to provide the argument +* information required by the verifier to verify the program. +* +* btf_ctx_access() will lookup prog->aux->arg_info to find the +* corresponding entry for an given argument. +*/ +struct bpf_struct_ops_member_arg_info { +struct bpf_ctx_arg_aux *arg_info; +u32 arg_info_cnt; +}; +struct bpf_struct_ops_desc {struct bpf_struct_ops *st_ops;
@@ -1716,6 +1729,10 @@ struct bpf_struct_ops_desc {const struct btf_type *value_type;u32 type_id;u32 value_id; + +/* Collection of argument information for each member */ +struct bpf_struct_ops_member_arg_info *member_arg_info; +u32 member_arg_info_cnt; };enum bpf_struct_ops_state {
kernel/bpf/bpf_struct_ops.c +161 -5
217 lines not on this page · raw message
kernel/bpf/btf.c +14 -0
@@ -1699,6 +1699,20 @@ static void btf_free_struct_meta_tab(struct btf *btf)static void btf_free_struct_ops_tab (struct btf *btf) {struct btf_struct_ops_tab *tab = btf->struct_ops_tab; +struct bpf_struct_ops_member_arg_info *ma_info; +int i, j; +u32 cnt; + +if (tab) +for (i =0 ; i < tab->cnt; i++) { + ma_info = tab->ops[i].member_arg_info; +if (ma_info) { + cnt = tab->ops[i].member_arg_info_cnt; +for (j =0 ; j < cnt; j++) +kfree (ma_info[j].arg_info); + } +kfree (ma_info); + }kfree (tab); btf->struct_ops_tab =NULL ;
kernel/bpf/verifier.c +6 -0
@@ -20373,6 +20373,12 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) } } +/* btf_ctx_access() used this to provide argument type info */ + prog->aux->ctx_arg_info = + st_ops_desc->member_arg_info[member_idx].arg_info; + prog->aux->ctx_arg_info_size = + st_ops_desc->member_arg_info[member_idx].arg_info_cnt; + prog->aux->attach_func_proto = func_proto; prog->aux->attach_func_name = mname; env->ops = st_ops->verifier_ops;
Signature · 1 line
2.34.1
Martin KaFai Lau
reviewerRe: [RFC bpf-next v4 5/6] bpf: Create argument information for nullable arguments.
Quoted 27 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
Collect argument information from the type information of stub functions to mark arguments of BPF
struct_opsprograms withPTR_MAYBE_NULLif they are nullable. A nullable argument is annotated by suffixing "__nullable" at the argument name of stub function.For nullable arguments, this patch sets an
arg_infoto label theirreg_typewithPTR_TO_BTF_ID|PTR_TRUSTED|PTR_MAYBE_NULL. This makes the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before accessing the pointed memory.The implementer of a
struct_opstype should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, fortest_maybe_nullof structbpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function.Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions having not nullable arguments, stub functions are not necessary for the purpose of this patch.
Quoted 5 lines
This patch will prepare a list of struct
bpf_ctx_arg_aux, akaarg_info, for each member field of astruct_opstype. "arg_info" will be assigned to "prog->aux->ctx_arg_info" of BPFstruct_opsprograms incheck_struct_ops_btf_id()so that it can be used bybtf_ctx_access()later to setreg_typeproperly for the verifier.
I looked at the high level. Some comments below.
Quoted 124 lines
Signed-off-by Kui-Feng Lee <[email protected]>--- include/linux/bpf.h | 17 ++++ kernel/bpf/bpf_struct_ops.c | 166 ++++++++++++++++++++++++++++++++++-- kernel/bpf/btf.c | 14 +++ kernel/bpf/verifier.c | 6 ++ 4 files changed, 198 insertions(+), 5 deletions(-)include/linux/bpf.h +17
-0@@ -1709,6 +1709,19 @@ struct bpf_struct_ops {struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS ]; }; +/* Every member of a struct_ops type has an instance even the member is not +* an operator (function pointer). The "arg_info" field will be assigned to +* prog->aux->arg_info of BPF struct_ops programs to provide the argument +* information required by the verifier to verify the program. +* +* btf_ctx_access() will lookup prog->aux->arg_info to find the +* corresponding entry for an given argument. +*/ +struct bpf_struct_ops_member_arg_info { +struct bpf_ctx_arg_aux *arg_info; +u32 arg_info_cnt; +}; +struct bpf_struct_ops_desc {struct bpf_struct_ops *st_ops;@@ -1716,6 +1729,10 @@ struct bpf_struct_ops_desc {const struct btf_type *value_type;u32 type_id;u32 value_id; + +/* Collection of argument information for each member */ +struct bpf_struct_ops_member_arg_info *member_arg_info; +u32 member_arg_info_cnt; };enum bpf_struct_ops_state {kernel/bpf/bpf_struct_ops.c +72
-0@@ -116,17 +116,148 @@ static bool is_valid_value_type(struct btf *btf, s32 value_id,return true; } +#define MAYBE_NULL_SUFFIX "__nullable" +#define MAX_STUB_NAME 128 + +static int match_nullable_suffix (const char *name) +{ +int suffix_len, len; + +if (!name) +return 0 ; + + suffix_len =sizeof (MAYBE_NULL_SUFFIX ) -1 ; + len =strlen (name); +if (len < suffix_len) +return 0 ; + +return !strcmp (name + len - suffix_len,MAYBE_NULL_SUFFIX ); +} + +/* Return the type info of a stub function, if it exists. +* +* The name of the stub function is made up of the name of the struct_ops +* and the name of the function pointer member, separated by "__". For +* example, if the struct_ops is named "foo_ops" and the function pointer +* member is named "bar", the stub function name would be "foo_ops__bar". +*/ +static const struct btf_type * +find_stub_func_proto (struct btf *btf,const char *st_op_name, +const char *member_name) +{ +char stub_func_name[MAX_STUB_NAME ]; +const struct btf_type *t, *func_proto; +s32 btf_id; + +snprintf (stub_func_name,MAX_STUB_NAME ,"%s__%s" , + st_op_name, member_name); + btf_id =btf_find_by_name_kind (btf, stub_func_name,BTF_KIND_FUNC ); +if (btf_id <0 ) +return NULL ; + t =btf_type_by_id (btf, btf_id); +if (!t) +return NULL ; + func_proto =btf_type_by_id (btf, t->type); + +return func_proto; +} + +/* Prepare argument info for every nullable argument of a member of a +* struct_ops type. +* +* Create and initialize a list of struct bpf_struct_ops_member_arg_info +* according to type info of the arguments of the stub functions. (Check +* kCFI for more information about stub functions.) +* +* Each member in the struct_ops type has a struct +* bpf_struct_ops_member_arg_info to provide an array of struct +* bpf_ctx_arg_aux, which in turn provides the information that used by the +* verifier to check the arguments of the BPF struct_ops program assigned +* to the member. Here, we only care about the arguments that are marked as +* __nullable. +* +* The array of struct bpf_ctx_arg_aux is eventually assigned to +* prog->aux->ctx_arg_info of BPF struct_ops programs and passed to the +* verifier. (See check_struct_ops_btf_id()) +*/ +static int prepare_arg_info (struct btf *btf, +const char *st_ops_name, +const char *member_name, +struct bpf_struct_ops_member_arg_info *member_arg_info) +{ +const struct btf_type *stub_func_proto, *ptr_type; +struct bpf_ctx_arg_aux *arg_info, *ai_buf =NULL ; +const struct btf_param *args;
kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 200
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+u32 nargs, arg_no =0 ; +const char *arg_name; +s32 arg_btf_id; + + stub_func_proto =find_stub_func_proto (btf, st_ops_name, member_name); +if (!stub_func_proto) +return 0 ; + + nargs =btf_type_vlen (stub_func_proto); +if (nargs >MAX_BPF_FUNC_REG_ARGS ) {
Checking MAX_BPF_FUNC_REG_ARGS on the stub_func_proto may not be the right check. It should have been done on the origin func_proto (i.e. non-stub) when preparing the func_model in btf_distill_func_proto(). Please double check.
If it needs to do sanity check on nargs of stub_func_proto, a better check is to ensure the narg of the stub_func_proto is the same as the orig_func_proto instead. This discrepancy probably should have been complained by the compiler already but does not harm to check (==) here in case the argument type is changed and a force cast is used (more below).
Quoted 7 lines
kernel/bpf/bpf_struct_ops.c +7
-0+pr_warn ("Cannot support #%u args in stub func %s_stub_%s\n" , + nargs, st_ops_name, member_name); +return -EINVAL ; + } + + ai_buf =kcalloc (nargs,sizeof (*ai_buf),GFP_KERNEL ); +if (!ai_buf)
kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 217
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+return -ENOMEM ; + + args =btf_params (stub_func_proto); +for (arg_no =0 ; arg_no < nargs; arg_no++) { +/* Skip arguments that is not suffixed with +* "__nullable". +*/ + arg_name =btf_name_by_offset (btf, + args[arg_no].name_off); +if (!match_nullable_suffix (arg_name))
I have a question/request.
On top of tagging nullable, can we extend the ctx_arg_info idea here to allow changing the pointer type?
In particular, take a stub function in bpf_tcp_ca.c:
static u32 bpf_tcp_ca_ssthresh(struct tcp_sock *tp)
{
return 0;
}Instead of the "struct sock *sk" argument as defined in the tcp_congestion_ops, the stub function uses "struct tcp_sock *tp'. If we can reuse the ctx_arg_info idea here, then it can remove the existing way of changing the pointer type from bpf_tcp_ca_is_valid_access.
Quoted 11 lines
kernel/bpf/bpf_struct_ops.c +11
-0+continue ; + +/* Should be a pointer to struct, array, scalar, or enum */ + ptr_type =btf_type_resolve_ptr (btf, args[arg_no].type, + &arg_btf_id); +if (!ptr_type || + (!btf_type_is_struct (ptr_type) && + !btf_type_is_array (ptr_type) && + !btf_type_is_scalar (ptr_type) && + !btf_is_any_enum (ptr_type))) { +kfree (ai_buf);
kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 238
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+return -EINVAL ; + } + +/* Fill the information of the new argument */ + arg_info = ai_buf + member_arg_info->arg_info_cnt++; + arg_info->reg_type = +PTR_TRUSTED |PTR_MAYBE_NULL |PTR_TO_BTF_ID ; + arg_info->btf_id = arg_btf_id; + arg_info->btf = btf; + arg_info->offset = arg_no *sizeof (u64);
I think for the current struct_ops users should be fine to assume sizeof(u64). The current struct_ops users should only have pointer/scalar argument (meaning there is no struct passed-by-value argument).
I still think it is better to get it correct for all trampoline supported argument here. Take a look at 720e6a435194 ("bpf: Allow struct argument in trampoline based programs") and get_ctx_arg_idx(). It may be easier (not sure if it is cleaner) to directly store the arg_no into arg_info here but arg_info only has offset now. Please think about what could be a cleaner way to do it.
Quoted 63 lines
kernel/bpf/bpf_struct_ops.c +23
-4+ } + +if (!member_arg_info->arg_info_cnt) +kfree (ai_buf); +else + member_arg_info->arg_info = ai_buf; + +return 0 ; +} +int bpf_struct_ops_desc_init (struct bpf_struct_ops_desc *st_ops_desc,struct btf *btf,struct bpf_verifier_log *log) { +struct bpf_struct_ops_member_arg_info *member_arg_info;struct bpf_struct_ops *st_ops = st_ops_desc->st_ops;const struct btf_member *member;const struct btf_type *t;s32 type_id, value_id;char value_name[128 ];const char *mname; -int i; +int i, err;if (strlen (st_ops->name) +VALUE_PREFIX_LEN >=sizeof (value_name)) {@@ -160,6 +291,11 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc,if (!is_valid_value_type (btf, value_id, t, value_name))return -EINVAL ; + member_arg_info =kcalloc (btf_type_vlen (t),sizeof (*member_arg_info), +GFP_KERNEL ); +if (!member_arg_info) +return -ENOMEM ; +for_each_member (i, t, member) {const struct btf_type *func_proto;@@ -167,13 +303,15 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc,if (!*mname) {pr_warn ("anon member in struct %s is not supported\n" , st_ops->name); -return -EOPNOTSUPP ; + err = -EOPNOTSUPP ; + goto errout; }if (__btf_member_bitfield_size (t, member)) {pr_warn ("bit field member %s in struct %s is not supported\n" , mname, st_ops->name); -return -EOPNOTSUPP ; + err = -EOPNOTSUPP ; + goto errout; } func_proto = btf_type_resolve_func_ptr(btf,@@ -185,14 +323,24 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, &st_ops->func_models[i])) {pr_warn ("Error in parsing func ptr %s in struct %s\n" , mname, st_ops->name); -return -EINVAL ; + err = -EINVAL ; + goto errout;
kernel/bpf/bpf_struct_ops.c int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, · line 337
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +7
-0} + + err =prepare_arg_info (btf, st_ops->name, mname, + member_arg_info + i); +if (err) + goto errout; } + st_ops_desc->member_arg_info = member_arg_info; + st_ops_desc->member_arg_info_cnt =btf_type_vlen (t);
It should be the same as btf_type_vlen(st_ops_desc->type). I would avoid this duplicated info within the same st_ops_desc.
Quoted 67 lines
kernel/bpf/bpf_struct_ops.c +11
-1+if (st_ops->init (btf)) {pr_warn ("Error in init bpf_struct_ops %s\n" , st_ops->name); -return -EINVAL ; + err = -EINVAL ; + goto errout; } st_ops_desc->type_id = type_id;@@ -201,6 +349,14 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, st_ops_desc->value_type =btf_type_by_id (btf, value_id);return 0 ; + +errout: +while (i >0 ) +kfree (member_arg_info[--i].arg_info); +kfree (member_arg_info); + st_ops_desc->member_arg_info =NULL ; + +return err; } static int bpf_struct_ops_map_get_next_key(struct bpf_map *map, void *key,kernel/bpf/btf.c +14
-0@@ -1699,6 +1699,20 @@ static void btf_free_struct_meta_tab(struct btf *btf)static void btf_free_struct_ops_tab (struct btf *btf) {struct btf_struct_ops_tab *tab = btf->struct_ops_tab; +struct bpf_struct_ops_member_arg_info *ma_info; +int i, j; +u32 cnt; + +if (tab) +for (i =0 ; i < tab->cnt; i++) { + ma_info = tab->ops[i].member_arg_info; +if (ma_info) { + cnt = tab->ops[i].member_arg_info_cnt; +for (j =0 ; j < cnt; j++) +kfree (ma_info[j].arg_info); + } +kfree (ma_info); + }kfree (tab); btf->struct_ops_tab =NULL ;kernel/bpf/verifier.c +6
-0@@ -20373,6 +20373,12 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) } } +/* btf_ctx_access() used this to provide argument type info */ + prog->aux->ctx_arg_info = + st_ops_desc->member_arg_info[member_idx].arg_info; + prog->aux->ctx_arg_info_size = + st_ops_desc->member_arg_info[member_idx].arg_info_cnt; + prog->aux->attach_func_proto = func_proto; prog->aux->attach_func_name = mname; env->ops = st_ops->verifier_ops;
Re: [RFC bpf-next v4 5/6] bpf: Create argument information for nullable arguments.
Quoted 171 lines · Martin KaFai Lau
Quoted 27 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
Collect argument information from the type information of stub functions to mark arguments of BPF
struct_opsprograms withPTR_MAYBE_NULLif they are nullable. A nullable argument is annotated by suffixing "__nullable" at the argument name of stub function.For nullable arguments, this patch sets an
arg_infoto label theirreg_typewithPTR_TO_BTF_ID|PTR_TRUSTED|PTR_MAYBE_NULL. This makes the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before accessing the pointed memory.The implementer of a
struct_opstype should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, fortest_maybe_nullof structbpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function.Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions having not nullable arguments, stub functions are not necessary for the purpose of this patch.
Quoted 5 lines
This patch will prepare a list of struct
bpf_ctx_arg_aux, akaarg_info, for each member field of astruct_opstype. "arg_info" will be assigned to "prog->aux->ctx_arg_info" of BPFstruct_opsprograms incheck_struct_ops_btf_id()so that it can be used bybtf_ctx_access()later to setreg_typeproperly for the verifier.I looked at the high level. Some comments below.
Quoted 135 lines
Signed-off-by Kui-Feng Lee <[email protected]>---
include/linux/bpf.h | 17 ++++kernel/bpf/bpf_struct_ops.c| 166 ++++++++++++++++++++++++++++++++++-- kernel/bpf/btf.c | 14 +++ kernel/bpf/verifier.c | 6 ++4 files changed, 198 insertions(+), 5 deletions(-)include/linux/bpf.h +1
-0@@ -1709,6 +1709,19 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; }; +/* Every member of a struct_ops type has an instance even the member is not
+ * an operator (function pointer). The "arg_info" field will be assigned to
+ *prog->aux->arg_infoof BPFstruct_opsprograms to provide the argument
+ * information required by the verifier to verify the program.
+ *
+ *btf_ctx_access()will lookupprog->aux->arg_infoto find the
+ * corresponding entry for an given argument.
+ */include/linux/bpf.h +5
-0+struct bpf_struct_ops_member_arg_info { + struct bpf_ctx_arg_aux *arg_info; + u32 arg_info_cnt; +}; +struct
bpf_struct_ops_desc{
structbpf_struct_ops*st_ops;include/linux/bpf.h +4
-0@@ -1716,6 +1729,10 @@ struct bpf_struct_ops_desc { const struct btf_type *value_type; u32 type_id; u32 value_id; + + /* Collection of argument information for each member */ + struct bpf_struct_ops_member_arg_info *member_arg_info; + u32 member_arg_info_cnt; }; enum bpf_struct_ops_state {kernel/bpf/bpf_struct_ops.c +21
-0@@ -116,17 +116,148 @@ static bool is_valid_value_type(struct btf *btf, s32 value_id, return true; } +#define MAYBE_NULL_SUFFIX "__nullable" +#define MAX_STUB_NAME 128 + +static int match_nullable_suffix (const char *name) +{ + int suffix_len, len; + + if (!name) + return 0; + + suffix_len = sizeof(MAYBE_NULL_SUFFIX) - 1; + len = strlen(name); + if (len < suffix_len) + return 0; + + return !strcmp(name + len - suffix_len, MAYBE_NULL_SUFFIX); +} + +/* Return the type info of a stub function, if it exists. +* +* The name of the stub function is made up of the name of the
struct_ops
+ * and the name of the function pointer member, separated by "__". For
+ * example, if thestruct_opsis named "foo_ops" and the function pointer
+ * member is named "bar", the stub function name would be "foo_ops__bar".
+ */kernel/bpf/bpf_struct_ops.c +31
-0+static const struct btf_type * +find_stub_func_proto (struct btf *btf,const char *st_op_name, + const char *member_name) +{ + char stub_func_name[MAX_STUB_NAME]; + const struct btf_type *t, *func_proto; + s32 btf_id; + + snprintf(stub_func_name, MAX_STUB_NAME, "%s__%s", + st_op_name, member_name); + btf_id = btf_find_by_name_kind(btf, stub_func_name, BTF_KIND_FUNC); + if (btf_id < 0) + return NULL; + t = btf_type_by_id(btf, btf_id); + if (!t) + return NULL; + func_proto = btf_type_by_id(btf, t->type); + + return func_proto; +} + +/* Prepare argument info for every nullable argument of a member of a +* struct_ops type. +* +* Create and initialize a list of struct bpf_struct_ops_member_arg_info +* according to type info of the arguments of the stub functions. (Check +* kCFI for more information about stub functions.) +* +* Each member in the struct_ops type has a struct +* bpf_struct_ops_member_arg_info to provide an array of struct +* bpf_ctx_arg_aux, which in turn provides the information that used by the
+ * verifier to check the arguments of the BPFstruct_opsprogram assigned
+ * to the member. Here, we only care about the arguments that are marked as
+ *__nullable.
+ *
+ * The array of structbpf_ctx_arg_auxis eventually assigned to
+ *prog->aux->ctx_arg_infoof BPFstruct_opsprograms and passed to the
+ * verifier. (Seecheck_struct_ops_btf_id())
+ */kernel/bpf/bpf_struct_ops.c +13
-0+static int prepare_arg_info (struct btf *btf, + const char *st_ops_name, + const char *member_name, + struct bpf_struct_ops_member_arg_info *member_arg_info) +{ + const struct btf_type *stub_func_proto, *ptr_type; + struct bpf_ctx_arg_aux *arg_info, *ai_buf = NULL; + const struct btf_param *args; + u32 nargs, arg_no = 0; + const char *arg_name; + s32 arg_btf_id; + + stub_func_proto = find_stub_func_proto(btf, st_ops_name,
Quoted 8 lines
Quoted 6 lines
member_name);
+ if (!stub_func_proto)
+ return 0;
+
+ nargs =btf_type_vlen(stub_func_proto);
+ if (nargs >MAX_BPF_FUNC_REG_ARGS) {Checking
MAX_BPF_FUNC_REG_ARGSon thestub_func_protomay not be the right check. It should have been done on the originfunc_proto(i.e. non-stub) when preparing thefunc_modelinbtf_distill_func_proto(). Please double check.
Got it!
Quoted 2 lines
If it needs to do sanity check on nargs of
stub_func_proto, a better check is to ensure the narg of thestub_func_protois the same as theorig_func_protoinstead. This discrepancy probably should have been complained by the compiler already but does not harm to check (==) here in case the argument type is changed and a force cast is used (more below).
Yes, it should be complained by the compiler. However, we are not sure if the stub function found is the one assign to .cfi_stubs, or a random function happening to have a matched name.
Quoted 23 lines
Quoted 8 lines
+ pr_warn("Cannot support #%u args in stub func %s_stub_%s\n", + nargs,
st_ops_name,member_name);
+ return-EINVAL;
+ }kernel/bpf/bpf_struct_ops.c +3
-0+ + ai_buf = kcalloc(nargs, sizeof(*ai_buf), GFP_KERNEL); + if (!ai_buf)kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 217
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+ return -ENOMEM; + + args = btf_params(stub_func_proto); + for (arg_no = 0; arg_no < nargs; arg_no++) { + /* Skip arguments that is not suffixed with + * "__nullable". + */ + arg_name = btf_name_by_offset(btf, + args[arg_no].name_off); + if (!match_nullable_suffix(arg_name))I have a question/request.
On top of tagging nullable, can we extend the
ctx_arg_infoidea here to allow changing the pointer type?
Quoted 8 lines
In particular, take a stub function in
bpf_tcp_ca.c:static u32
bpf_tcp_ca_ssthresh(struct tcp_sock *tp){
return 0;
}Instead of the "struct sock *sk" argument as defined in the
tcp_congestion_ops, the stub function uses "structtcp_sock*tp'. If we can reuse thectx_arg_infoidea here, then it can remove the existing way of changing the pointer type frombpf_tcp_ca_is_valid_access.
Yes, it can be. We need a way to annotate the argument we want to override/promote its type, or generate ctx_arg_info for each argument of a stub function.
Quoted 25 lines
Quoted 12 lines
+ continue;
kernel/bpf/bpf_struct_ops.c +10
-0+ + /* Should be a pointer to struct, array, scalar, or enum */ + ptr_type = btf_type_resolve_ptr(btf, args[arg_no].type, + &arg_btf_id); + if (!ptr_type || + (!btf_type_is_struct(ptr_type) && + !btf_type_is_array(ptr_type) && + !btf_type_is_scalar(ptr_type) && + !btf_is_any_enum(ptr_type))) { + kfree(ai_buf);kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 238
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+ return -EINVAL; + } + + /* Fill the information of the new argument */ + arg_info = ai_buf + member_arg_info->arg_info_cnt++; + arg_info->reg_type = + PTR_TRUSTED | PTR_MAYBE_NULL | PTR_TO_BTF_ID; + arg_info->btf_id = arg_btf_id; + arg_info->btf = btf; + arg_info->offset = arg_no * sizeof(u64);I think for the current
struct_opsusers should be fine to assume sizeof(u64). The currentstruct_opsusers should only have pointer/scalar argument (meaning there is no struct passed-by-value argument).
Quoted 1 line
I still think it is better to get it correct for all trampoline supported argument here. Take a look at
720e6a435194("bpf: Allow struct argument in trampoline based programs") andget_ctx_arg_idx(). It may be
I will add another function to translate arg_no to offset.
Quoted 1 line
easier (not sure if it is cleaner) to directly store the
arg_nointoarg_infohere butarg_infoonly has offset now. Please think about what could be a cleaner way to do it.
The offset here is an offset from the start of a context where the argument is. The BPF opcode access an argument with it's offset, so we eventually need to translate the arg_no into the offset. The difference is translating here or in btf_ctx_access().
The question here is "what is OFFSET for?" Without explanation, it is hard for people to tell what it is. Maybe, we need to change the its to ctx_offset or alike.
Quoted 66 lines
Quoted 66 lines
+ }
kernel/bpf/bpf_struct_ops.c +9
-0+ + if (!member_arg_info->arg_info_cnt) + kfree(ai_buf); + else + member_arg_info->arg_info = ai_buf; + + return 0; +} +int bpf_struct_ops_desc_init(struct
bpf_struct_ops_desc*st_ops_desc, struct btf *btf,
structbpf_verifier_log*log)
{
+ structbpf_struct_ops_member_arg_info*member_arg_info; structbpf_struct_ops*st_ops=st_ops_desc->st_ops; const structbtf_member*member;
const structbtf_type*t;
s32type_id,value_id;
char value_name[128];
const char *mname;
- int i;
+ int i, err;
if (strlen(st_ops->name)+VALUE_PREFIX_LEN>=sizeof(value_name)) {kernel/bpf/bpf_struct_ops.c +13
-3@@ -160,6 +291,11 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, if (!is_valid_value_type(btf, value_id, t, value_name)) return -EINVAL; + member_arg_info = kcalloc(btf_type_vlen(t),sizeof (*member_arg_info), + GFP_KERNEL); + if (!member_arg_info) + return -ENOMEM; + for_each_member(i, t, member) { const struct btf_type *func_proto;@@ -167,13 +303,15 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, if (!*mname) { pr_warn("anon member in struct %s is not supported\n", st_ops->name); - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + goto errout; } if (__btf_member_bitfield_size(t, member)) { pr_warn("bit field member %s in struct %s is not supported\n", mname, st_ops->name); - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + goto errout; } func_proto = btf_type_resolve_func_ptr(btf,@@ -185,14 +323,24 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, &st_ops->func_models[i])) { pr_warn("Error in parsing func ptr %s in struct %s\n", mname, st_ops->name); - return -EINVAL; + err = -EINVAL; + goto errout; } + + err = prepare_arg_info(btf, st_ops->name, mname,
Quoted 8 lines
kernel/bpf/bpf_struct_ops.c int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, · line 337
Quoted 6 lines
kernel/bpf/bpf_struct_ops.c +5
-0+ member_arg_info + i); + if (err) + goto errout; } + st_ops_desc->member_arg_info = member_arg_info; + st_ops_desc->member_arg_info_cnt = btf_type_vlen(t);It should be the same as
btf_type_vlen(st_ops_desc->type). I would avoid this duplicated info within the samest_ops_desc.
Will remove it.
Quoted 67 lines
Quoted 66 lines
kernel/bpf/bpf_struct_ops.c +11
-1+ if (st_ops->init(btf)) { pr_warn("Error in init bpf_struct_ops %s\n", st_ops->name); - return -EINVAL; + err = -EINVAL; + goto errout; } st_ops_desc->type_id = type_id;@@ -201,6 +349,14 @@ int bpf_struct_ops_desc_init(structbpf_struct_ops_desc *st_ops_desc, st_ops_desc->value_type = btf_type_by_id(btf, value_id); return 0; + +errout: + while (i > 0) + kfree(member_arg_info[--i].arg_info); + kfree(member_arg_info); + st_ops_desc->member_arg_info = NULL; + + return err; } static int bpf_struct_ops_map_get_next_key(struct bpf_map *map, void *key,kernel/bpf/btf.c +14
-0@@ -1699,6 +1699,20 @@ static void btf_free_struct_meta_tab(struct btf *btf) static void btf_free_struct_ops_tab(struct btf *btf) { struct btf_struct_ops_tab *tab = btf->struct_ops_tab; + struct bpf_struct_ops_member_arg_info *ma_info; + int i, j; + u32 cnt; + + if (tab) + for (i = 0; i < tab->cnt; i++) { + ma_info = tab->ops[i].member_arg_info; + if (ma_info) { + cnt = tab->ops[i].member_arg_info_cnt; + for (j = 0; j < cnt; j++) + kfree(ma_info[j].arg_info); + } + kfree(ma_info); + } kfree(tab); btf->struct_ops_tab = NULL;kernel/bpf/verifier.c +6
-0@@ -20373,6 +20373,12 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) } } + /* btf_ctx_access() used this to provide argument type info */ + prog->aux->ctx_arg_info = + st_ops_desc->member_arg_info[member_idx].arg_info; + prog->aux->ctx_arg_info_size = + st_ops_desc->member_arg_info[member_idx].arg_info_cnt; + prog->aux->attach_func_proto = func_proto; prog->aux->attach_func_name = mname; env->ops = st_ops->verifier_ops;
Re: [RFC bpf-next v4 5/6] bpf: Create argument information for nullable arguments.
Quoted 224 lines · Kui-Feng Lee
Quoted 173 lines · Martin KaFai Lau
Quoted 27 lines · On 2/2/24 2:05 PM, [email protected] wrote:
From: Kui-Feng Lee <[email protected]>
Collect argument information from the type information of stub functions to mark arguments of BPF
struct_opsprograms withPTR_MAYBE_NULLif they are nullable. A nullable argument is annotated by suffixing "__nullable" at the argument name of stub function.For nullable arguments, this patch sets an
arg_infoto label theirreg_typewithPTR_TO_BTF_ID|PTR_TRUSTED|PTR_MAYBE_NULL. This makes the verifier to check programs and ensure that they properly check the pointer. The programs should check if the pointer is null before accessing the pointed memory.The implementer of a
struct_opstype should annotate the arguments that can be null. The implementer should define a stub function (empty) as a placeholder for each defined operator. The name of a stub function should be in the pattern "<st_op_type>__<operator name>". For example, fortest_maybe_nullof structbpf_testmod_ops, it's stub function name should be "bpf_testmod_ops__test_maybe_null". You mark an argument nullable by suffixing the argument name with "__nullable" at the stub function.Since we already has stub functions for kCFI, we just reuse these stub functions with the naming convention mentioned earlier. These stub functions with the naming convention is only required if there are nullable arguments to annotate. For functions having not nullable arguments, stub functions are not necessary for the purpose of this patch.
Quoted 5 lines
This patch will prepare a list of struct
bpf_ctx_arg_aux, akaarg_info, for each member field of astruct_opstype. "arg_info" will be assigned to "prog->aux->ctx_arg_info" of BPFstruct_opsprograms incheck_struct_ops_btf_id()so that it can be used bybtf_ctx_access()later to setreg_typeproperly for the verifier.I looked at the high level. Some comments below.
Quoted 137 lines
Signed-off-by Kui-Feng Lee <[email protected]>---
include/linux/bpf.h | 17 ++++kernel/bpf/bpf_struct_ops.c| 166 ++++++++++++++++++++++++++++++++++-- kernel/bpf/btf.c | 14 +++ kernel/bpf/verifier.c | 6 ++4 files changed, 198 insertions(+), 5 deletions(-)include/linux/bpf.h +1
-0@@ -1709,6 +1709,19 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; }; +/* Every member of a struct_ops type has an instance even the member is not
+ * an operator (function pointer). The "arg_info" field will be assigned to
+ *prog->aux->arg_infoof BPFstruct_opsprograms to provide the argument
+ * information required by the verifier to verify the program.
+ *
+ *btf_ctx_access()will lookupprog->aux->arg_infoto find the
+ * corresponding entry for an given argument.
+ */include/linux/bpf.h +5
-0+struct bpf_struct_ops_member_arg_info { + struct bpf_ctx_arg_aux *arg_info; + u32 arg_info_cnt; +}; +struct
bpf_struct_ops_desc{
structbpf_struct_ops*st_ops;include/linux/bpf.h +4
-0@@ -1716,6 +1729,10 @@ struct bpf_struct_ops_desc { const struct btf_type *value_type; u32 type_id; u32 value_id; + + /* Collection of argument information for each member */ + struct bpf_struct_ops_member_arg_info *member_arg_info; + u32 member_arg_info_cnt; }; enum bpf_struct_ops_state {kernel/bpf/bpf_struct_ops.c +21
-0@@ -116,17 +116,148 @@ static bool is_valid_value_type(struct btf *btf, s32 value_id, return true; } +#define MAYBE_NULL_SUFFIX "__nullable" +#define MAX_STUB_NAME 128 + +static int match_nullable_suffix (const char *name) +{ + int suffix_len, len; + + if (!name) + return 0; + + suffix_len = sizeof(MAYBE_NULL_SUFFIX) - 1; + len = strlen(name); + if (len < suffix_len) + return 0; + + return !strcmp(name + len - suffix_len, MAYBE_NULL_SUFFIX); +} + +/* Return the type info of a stub function, if it exists. +* +* The name of the stub function is made up of the name of the
struct_ops
+ * and the name of the function pointer member, separated by "__". For
+ * example, if thestruct_opsis named "foo_ops" and the function pointer
+ * member is named "bar", the stub function name would be "foo_ops__bar".
+ */kernel/bpf/bpf_struct_ops.c +25
-0+static const struct btf_type * +find_stub_func_proto (struct btf *btf,const char *st_op_name, + const char *member_name) +{ + char stub_func_name[MAX_STUB_NAME]; + const struct btf_type *t, *func_proto; + s32 btf_id; + + snprintf(stub_func_name, MAX_STUB_NAME, "%s__%s", + st_op_name, member_name); + btf_id = btf_find_by_name_kind(btf, stub_func_name, BTF_KIND_FUNC); + if (btf_id < 0) + return NULL; + t = btf_type_by_id(btf, btf_id); + if (!t) + return NULL; + func_proto = btf_type_by_id(btf, t->type); + + return func_proto; +} + +/* Prepare argument info for every nullable argument of a member of a +* struct_ops type. +* +* Create and initialize a list of struct
bpf_struct_ops_member_arg_info
+ * according to type info of the arguments of the stub functions. (Check
+ * kCFI for more information about stub functions.)
+ *
+ * Each member in thestruct_opstype has a struct
+ *bpf_struct_ops_member_arg_infoto provide an array of struct
+ *bpf_ctx_arg_aux, which in turn provides the information that used by the
+ * verifier to check the arguments of the BPFstruct_opsprogram assigned
+ * to the member. Here, we only care about the arguments that are marked as
+ *__nullable.
+ *
+ * The array of structbpf_ctx_arg_auxis eventually assigned to
+ *prog->aux->ctx_arg_infoof BPFstruct_opsprograms and passed to the
+ * verifier. (Seecheck_struct_ops_btf_id())
+ */kernel/bpf/bpf_struct_ops.c +13
-0+static int prepare_arg_info (struct btf *btf, + const char *st_ops_name, + const char *member_name, + struct bpf_struct_ops_member_arg_info *member_arg_info) +{ + const struct btf_type *stub_func_proto, *ptr_type; + struct bpf_ctx_arg_aux *arg_info, *ai_buf = NULL; + const struct btf_param *args; + u32 nargs, arg_no = 0; + const char *arg_name; + s32 arg_btf_id; + + stub_func_proto = find_stub_func_proto(btf, st_ops_name,Quoted 8 lines
Quoted 6 lines
member_name);
+ if (!stub_func_proto)
+ return 0;
+
+ nargs =btf_type_vlen(stub_func_proto);
+ if (nargs >MAX_BPF_FUNC_REG_ARGS) {Checking
MAX_BPF_FUNC_REG_ARGSon thestub_func_protomay not be the right check. It should have been done on the originfunc_proto(i.e. non-stub) when preparing thefunc_modelinbtf_distill_func_proto(). Please double check.Got it!
Quoted 2 lines
If it needs to do sanity check on nargs of
stub_func_proto, a better check is to ensure the narg of thestub_func_protois the same as theorig_func_protoinstead. This discrepancy probably should have been complained by the compiler already but does not harm to check (==) here in case the argument type is changed and a force cast is used (more below).Yes, it should be complained by the compiler. However, we are not sure if the stub function found is the one assign to .cfi_stubs, or a random function happening to have a matched name.
Quoted 30 lines
Quoted 8 lines
+ pr_warn("Cannot support #%u args in stub func %s_stub_%s\n", + nargs,
st_ops_name,member_name);
+ return-EINVAL;
+ }kernel/bpf/bpf_struct_ops.c +3
-0+ + ai_buf = kcalloc(nargs, sizeof(*ai_buf), GFP_KERNEL); + if (!ai_buf)kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 217
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+ return -ENOMEM; + + args = btf_params(stub_func_proto); + for (arg_no = 0; arg_no < nargs; arg_no++) { + /* Skip arguments that is not suffixed with + * "__nullable". + */ + arg_name = btf_name_by_offset(btf, + args[arg_no].name_off); + if (!match_nullable_suffix(arg_name))I have a question/request.
On top of tagging nullable, can we extend the
ctx_arg_infoidea here to allow changing the pointer type?In particular, take a stub function in
bpf_tcp_ca.c:static u32
bpf_tcp_ca_ssthresh(struct tcp_sock *tp){
return 0;
}
Quoted 5 lines
Quoted 1 line
Instead of the "struct sock *sk" argument as defined in the
tcp_congestion_ops, the stub function uses "structtcp_sock*tp'. If we can reuse thectx_arg_infoidea here, then it can remove the existing way of changing the pointer type frombpf_tcp_ca_is_valid_access.Yes, it can be. We need a way to annotate the argument we want to override/promote its type, or generate
ctx_arg_infofor each argument of a stub function.
By the way, should I support it with the "__override"/"__promote" suffix or any better one?
Quoted 185 lines
Quoted 26 lines
Quoted 13 lines
+ continue;
kernel/bpf/bpf_struct_ops.c +10
-0+ + /* Should be a pointer to struct, array, scalar, or enum */ + ptr_type = btf_type_resolve_ptr(btf, args[arg_no].type, + &arg_btf_id); + if (!ptr_type || + (!btf_type_is_struct(ptr_type) && + !btf_type_is_array(ptr_type) && + !btf_type_is_scalar(ptr_type) && + !btf_is_any_enum(ptr_type))) { + kfree(ai_buf);kernel/bpf/bpf_struct_ops.c static bool is_valid_value_type(struct btf *btf, s32 value_id, · line 238
Quoted 10 lines
kernel/bpf/bpf_struct_ops.c +10
-0+ return -EINVAL; + } + + /* Fill the information of the new argument */ + arg_info = ai_buf + member_arg_info->arg_info_cnt++; + arg_info->reg_type = + PTR_TRUSTED | PTR_MAYBE_NULL | PTR_TO_BTF_ID; + arg_info->btf_id = arg_btf_id; + arg_info->btf = btf; + arg_info->offset = arg_no * sizeof(u64);I think for the current
struct_opsusers should be fine to assume sizeof(u64). The currentstruct_opsusers should only have pointer/scalar argument (meaning there is no struct passed-by-value argument).Quoted 1 line
I still think it is better to get it correct for all trampoline supported argument here. Take a look at
720e6a435194("bpf: Allow struct argument in trampoline based programs") andget_ctx_arg_idx(). It may beI will add another function to translate
arg_noto offset.Quoted 1 line
easier (not sure if it is cleaner) to directly store the
arg_nointoarg_infohere butarg_infoonly has offset now. Please think about what could be a cleaner way to do it.The offset here is an offset from the start of a context where the argument is. The BPF opcode access an argument with it's offset, so we eventually need to translate the
arg_nointo the offset. The difference is translating here or inbtf_ctx_access().The question here is "what is OFFSET for?" Without explanation, it is hard for people to tell what it is. Maybe, we need to change the its to
ctx_offsetor alike.Quoted 66 lines
Quoted 66 lines
+ }
kernel/bpf/bpf_struct_ops.c +9
-0+ + if (!member_arg_info->arg_info_cnt) + kfree(ai_buf); + else + member_arg_info->arg_info = ai_buf; + + return 0; +} +int bpf_struct_ops_desc_init(struct
bpf_struct_ops_desc*st_ops_desc, struct btf *btf,
structbpf_verifier_log*log)
{
+ structbpf_struct_ops_member_arg_info*member_arg_info; structbpf_struct_ops*st_ops=st_ops_desc->st_ops; const structbtf_member*member;
const structbtf_type*t;
s32type_id,value_id;
char value_name[128];
const char *mname;
- int i;
+ int i, err;
if (strlen(st_ops->name)+VALUE_PREFIX_LEN>=sizeof(value_name)) {kernel/bpf/bpf_struct_ops.c +13
-3@@ -160,6 +291,11 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, if (!is_valid_value_type(btf, value_id, t, value_name)) return -EINVAL; + member_arg_info = kcalloc(btf_type_vlen(t),sizeof (*member_arg_info), + GFP_KERNEL); + if (!member_arg_info) + return -ENOMEM; + for_each_member(i, t, member) { const struct btf_type *func_proto;@@ -167,13 +303,15 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, if (!*mname) { pr_warn("anon member in struct %s is not supported\n", st_ops->name); - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + goto errout; } if (__btf_member_bitfield_size(t, member)) { pr_warn("bit field member %s in struct %s is not supported\n", mname, st_ops->name); - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + goto errout; } func_proto = btf_type_resolve_func_ptr(btf,@@ -185,14 +323,24 @@ int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, &st_ops->func_models[i])) { pr_warn("Error in parsing func ptr %s in struct %s\n", mname, st_ops->name); - return -EINVAL; + err = -EINVAL; + goto errout; } + + err = prepare_arg_info(btf, st_ops->name, mname,Quoted 8 lines
kernel/bpf/bpf_struct_ops.c int bpf_struct_ops_desc_init(struct bpf_struct_ops_desc *st_ops_desc, · line 337
Quoted 6 lines
kernel/bpf/bpf_struct_ops.c +5
-0+ member_arg_info + i); + if (err) + goto errout; } + st_ops_desc->member_arg_info = member_arg_info; + st_ops_desc->member_arg_info_cnt = btf_type_vlen(t);It should be the same as
btf_type_vlen(st_ops_desc->type). I would avoid this duplicated info within the samest_ops_desc.Will remove it.
Quoted 67 lines
Quoted 66 lines
kernel/bpf/bpf_struct_ops.c +11
-1+ if (st_ops->init(btf)) { pr_warn("Error in init bpf_struct_ops %s\n", st_ops->name); - return -EINVAL; + err = -EINVAL; + goto errout; } st_ops_desc->type_id = type_id;@@ -201,6 +349,14 @@ int bpf_struct_ops_desc_init(structbpf_struct_ops_desc *st_ops_desc, st_ops_desc->value_type = btf_type_by_id(btf, value_id); return 0; + +errout: + while (i > 0) + kfree(member_arg_info[--i].arg_info); + kfree(member_arg_info); + st_ops_desc->member_arg_info = NULL; + + return err; } static int bpf_struct_ops_map_get_next_key(struct bpf_map *map, void *key,kernel/bpf/btf.c +14
-0@@ -1699,6 +1699,20 @@ static void btf_free_struct_meta_tab(struct btf *btf) static void btf_free_struct_ops_tab(struct btf *btf) { struct btf_struct_ops_tab *tab = btf->struct_ops_tab; + struct bpf_struct_ops_member_arg_info *ma_info; + int i, j; + u32 cnt; + + if (tab) + for (i = 0; i < tab->cnt; i++) { + ma_info = tab->ops[i].member_arg_info; + if (ma_info) { + cnt = tab->ops[i].member_arg_info_cnt; + for (j = 0; j < cnt; j++) + kfree(ma_info[j].arg_info); + } + kfree(ma_info); + } kfree(tab); btf->struct_ops_tab = NULL;kernel/bpf/verifier.c +6
-0@@ -20373,6 +20373,12 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) } } + /* btf_ctx_access() used this to provide argument type info */ + prog->aux->ctx_arg_info = + st_ops_desc->member_arg_info[member_idx].arg_info; + prog->aux->ctx_arg_info_size = + st_ops_desc->member_arg_info[member_idx].arg_info_cnt; + prog->aux->attach_func_proto = func_proto; prog->aux->attach_func_name = mname; env->ops = st_ops->verifier_ops;
Re: [RFC bpf-next v4 5/6] bpf: Create argument information for nullable arguments.
In reply to Martin KaFai LauQuoted 5 lines · Martin KaFai Lau
I have a question/request.
On top of tagging nullable, can we extend the
ctx_arg_infoidea here to allow changing the pointer type?
Quoted 9 lines
In particular, take a stub function in
bpf_tcp_ca.c:static u32
bpf_tcp_ca_ssthresh(struct tcp_sock *tp){
return 0;
}Instead of the "struct sock *sk" argument as defined in the
tcp_congestion_ops, the stub function uses "structtcp_sock*tp'. If we can reuse thectx_arg_infoidea here, then it can remove the existing way of changing the pointer type frombpf_tcp_ca_is_valid_access.
A question just come to me. Why doesn't just define the argument as a pointer to struct tpc_sock in the definition of the function pointer?
RFC v4 6/6 selftests/bpf: Test PTR_MAYBE_NULL arguments of struct_ops operators.
In reply to [email protected]From: Kui-Feng Lee <[email protected]>
Test if the verifier verifies nullable pointer arguments correctly for BPF struct_ops programs.
"test_maybe_null" in struct bpf_testmod_ops is the operator defined for the test cases here. It has several pointer arguments to various types. These pointers are majorly classified to 3 categories; pointers to struct types, pointers to scalar types, and pointers to array types. They are handled sightly differently.
A BPF program should check a pointer for NULL beforehand to access the value pointed by the nullable pointer arguments, or the verifier should reject the programs. The test here includes two parts; the programs checking pointers properly and the programs not checking pointers beforehand. The test checks if the verifier accepts the programs checking properly and rejects the programs not checking at all.
--- .../selftests/bpf/bpf_testmod/bpf_testmod.c | 23 ++++- .../selftests/bpf/bpf_testmod/bpf_testmod.h | 10 ++ .../prog_tests/test_struct_ops_maybe_null.c | 61 ++++++++++++ .../bpf/progs/struct_ops_maybe_null.c | 41 ++++++++ .../bpf/progs/struct_ops_maybe_null_fail.c | 98 +++++++++++++++++++ 5 files changed, 228 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/test_struct_ops_maybe_null.c create mode 100644 tools/testing/selftests/bpf/progs/struct_ops_maybe_null.c create mode 100644 tools/testing/selftests/bpf/progs/struct_ops_maybe_null_fail.c
tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.c +18 -5
@@ -556,7 +556,10 @@ static int bpf_dummy_reg(void *kdata)struct bpf_testmod_ops *ops = kdata;int r; - r = ops->test_2 (4 ,3 ); +if (ops->test_maybe_null) + r = ops->test_maybe_null (0 ,NULL ,NULL ,NULL ,NULL ); +else + r = ops->test_2 (4 ,3 );return 0 ; }
@@ -565,19 +568,29 @@ static void bpf_dummy_unreg(void *kdata) { } -static int bpf_testmod_test_1 (void ) +static int bpf_testmod_ops__test_1 (void ) {return 0 ; } -static int bpf_testmod_test_2 (int a,int b) +static int bpf_testmod_ops__test_2 (int a,int b) +{ +return 0 ; +} + +static int bpf_testmod_ops__test_maybe_null (int dummy, +struct task_struct *task__nullable, +u32 *scalar__nullable, +u32 (*ar__nullable)[2 ], +u32 (*ar2__nullable)[]) {return 0 ; }static struct bpf_testmod_ops __bpf_testmod_ops = { - .test_1 = bpf_testmod_test_1, - .test_2 = bpf_testmod_test_2, + .test_1 = bpf_testmod_ops__test_1, + .test_2 = bpf_testmod_ops__test_2, + .test_maybe_null = bpf_testmod_ops__test_maybe_null, };struct bpf_struct_ops bpf_bpf_testmod_ops = {
tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.h +10 -0
@@ -5,6 +5,8 @@#include <linux/types.h> +struct task_struct ; +struct bpf_testmod_test_read_ctx {char *buf;loff_t off;
@@ -28,9 +30,17 @@ struct bpf_iter_testmod_seq { int cnt; }; +typedef u32 (*ar_t )[2 ]; +typedef u32 (*ar2_t )[]; +struct bpf_testmod_ops {int (*test_1)(void );int (*test_2)(int a,int b); +/* Used to test nullable arguments. */ +int (*test_maybe_null)(int dummy,struct task_struct *task, +u32 *scalar, +ar_t ar, +ar2_t ar2); };#endif /* _BPF_TESTMOD_H */
tools/testing/selftests/bpf/prog_tests/test_struct_ops_maybe_null.c new file +61 -0
61 lines not on this page · raw message
tools/testing/selftests/bpf/progs/struct_ops_maybe_null.c new file +41 -0
41 lines not on this page · raw message
tools/testing/selftests/bpf/progs/struct_ops_maybe_null_fail.c new file +98 -0
98 lines not on this page · raw message
Signature · 1 line
2.34.1