neigh: Support filtering neighbours for L3 slave
Subsystems (2)
PATCH 1/1 neigh: Support filtering neighbours for L3 slave
Currently there's support for filtering neighbours for interfaces which are in a specific VRF (passing the VRF interface in 'NDA_MASTER'), but there's not support for filtering interfaces which are not in an L3 domain (the "default VRF").
This means userspace is unable to show/flush neighbours in the default VRF (in contrast to a "real" VRF - Using "ip neigh show vrf <vrf_dev>").
Therefore for userspace to be able to do so, it must manually iterate over all the interfaces, check each one if it's in the default VRF, and if so send the matching flush/show message.
This patch adds the ability to do so easily, by passing a dummy value as the 'NDA_MASTER' ('NDV_NOT_L3_SLAVE').
Note that 'NDV_NOT_L3_SLAVE' is a negative number, meaning it is not a valid ifindex, so it doesn't break existing programs.
I have a patch for iproute2 ready for adding this support in userspace.
--- include/uapi/linux/neighbour.h | 2 ++ net/core/neighbour.c | 3 +++ 2 files changed, 5 insertions(+)
include/uapi/linux/neighbour.h +2 -0
@@ -196,4 +196,6 @@ enum { };#define NFEA_MAX (__NFEA_MAX - 1) +#define NDV_NOT_L3_SLAVE (-10) +#endif
net/core/neighbour.c +3 -0
@@ -2529,6 +2529,9 @@ static bool neigh_master_filtered(struct net_device *dev, int master_idx) {struct net_device *master; +if (master_idx ==NDV_NOT_L3_SLAVE ) +return netif_is_l3_slave (dev); +if (!master_idx)return false;
Signature · 1 line
2.17.1
Quoted 45 lines · Lahav Schlesinger
Currently there's support for filtering neighbours for interfaces which are in a specific VRF (passing the VRF interface in '
NDA_MASTER'), but there's not support for filtering interfaces which are not in an L3 domain (the "default VRF").This means userspace is unable to show/flush neighbours in the default VRF (in contrast to a "real" VRF - Using "ip neigh show vrf <
vrf_dev>").Therefore for userspace to be able to do so, it must manually iterate over all the interfaces, check each one if it's in the default VRF, and if so send the matching flush/show message.
This patch adds the ability to do so easily, by passing a dummy value as the '
NDA_MASTER' ('NDV_NOT_L3_SLAVE').
Note that 'NDV_NOT_L3_SLAVE' is a negative number, meaning it is not a valid ifindex, so it doesn't break existing programs.I have a patch for iproute2 ready for adding this support in userspace.
Signed-off-by Lahav Schlesinger <[email protected]>Cc David S. Miller <[email protected]>Cc Jakub Kicinski <[email protected]>Cc David Ahern <[email protected]>--- include/uapi/linux/neighbour.h | 2 ++ net/core/neighbour.c | 3 +++ 2 files changed, 5 insertions(+)include/uapi/linux/neighbour.h +2
-0@@ -196,4 +196,6 @@ enum { };#define NFEA_MAX (__NFEA_MAX - 1) +#define NDV_NOT_L3_SLAVE (-10) +#endif net/core/neighbour.c +0
-0
net/core/neighbour.c static bool neigh_master_filtered(struct net_device *dev, int master_idx) · line 2537
Quoted 9 lines
net/core/neighbour.c +3
-0@@ -2529,6 +2529,9 @@ static bool neigh_master_filtered(struct net_device *dev, int master_idx) {struct net_device *master; +if (master_idx ==NDV_NOT_L3_SLAVE ) +return netif_is_l3_slave (dev); +if (!master_idx)return false;
you can not special case VRFs like this, and such a feature should apply to links and addresses as well.
One idea is to pass "*_MASTER" as -1 (use "none" keyword for iproute2) and then update kernel side to only return entries if the corresponding device is not enslaved to another device. Unfortunately since I did not check that _MASTER was non-zero in the current code, we can not use 0 as a valid flag for "not enslaved". Be sure to document why -1 is used.
Quoted 48 lines · David Ahern
Quoted 47 lines · Lahav Schlesinger
Currently there's support for filtering neighbours for interfaces which are in a specific VRF (passing the VRF interface in '
NDA_MASTER'), but there's not support for filtering interfaces which are not in an L3 domain (the "default VRF").This means userspace is unable to show/flush neighbours in the default VRF (in contrast to a "real" VRF - Using "ip neigh show vrf <
vrf_dev>").Therefore for userspace to be able to do so, it must manually iterate over all the interfaces, check each one if it's in the default VRF, and if so send the matching flush/show message.
This patch adds the ability to do so easily, by passing a dummy value as the '
NDA_MASTER' ('NDV_NOT_L3_SLAVE').
Note that 'NDV_NOT_L3_SLAVE' is a negative number, meaning it is not a valid ifindex, so it doesn't break existing programs.I have a patch for iproute2 ready for adding this support in userspace.
Signed-off-by Lahav Schlesinger <[email protected]>Cc David S. Miller <[email protected]>Cc Jakub Kicinski <[email protected]>Cc David Ahern <[email protected]>--- include/uapi/linux/neighbour.h | 2 ++ net/core/neighbour.c | 3 +++ 2 files changed, 5 insertions(+)include/uapi/linux/neighbour.h +2
-0@@ -196,4 +196,6 @@ enum { };#define NFEA_MAX (__NFEA_MAX - 1) +#define NDV_NOT_L3_SLAVE (-10) +#endif net/core/neighbour.c +0
-0@@ -2529,6 +2529,9 @@ static bool neigh_master_filtered(struct net_device *dev, int master_idx) {struct net_device *master;
Quoted 10 lines
net/core/neighbour.c static bool neigh_master_filtered(struct net_device *dev, int master_idx) · line 2537
Quoted 7 lines
net/core/neighbour.c +3
-0+if (master_idx ==NDV_NOT_L3_SLAVE ) +return netif_is_l3_slave (dev); +if (!master_idx)return false;you can not special case VRFs like this, and such a feature should apply to links and addresses as well.
Understandable, I'll change it.
In this case though, how would you advice to efficiently filter neighbours for interfaces in the default VRF in userspace (without quering the master of every interface that is being dumped)? I reckoned that because there's support in iproute2 for filtering based on a specific VRF, filtering for the default VRF is a natural extension
Quoted 6 lines
One idea is to pass "
*_MASTER" as -1 (use "none" keyword for iproute2) and then update kernel side to only return entries if the corresponding device is not enslaved to another device. Unfortunately since I did not check that_MASTERwas non-zero in the current code, we can not use 0 as a valid flag for "not enslaved". Be sure to document why -1 is used.
Do you mean the command will look like "ip link show master none"? If so, wouldn't this cause an ambiguity if an interface names "none" is present?
Quoted 60 lines · Lahav Schlesinger
Quoted 48 lines · David Ahern
Quoted 47 lines · Lahav Schlesinger
Currently there's support for filtering neighbours for interfaces which are in a specific VRF (passing the VRF interface in '
NDA_MASTER'), but there's not support for filtering interfaces which are not in an L3 domain (the "default VRF").This means userspace is unable to show/flush neighbours in the default VRF (in contrast to a "real" VRF - Using "ip neigh show vrf <
vrf_dev>").Therefore for userspace to be able to do so, it must manually iterate over all the interfaces, check each one if it's in the default VRF, and if so send the matching flush/show message.
This patch adds the ability to do so easily, by passing a dummy value as the '
NDA_MASTER' ('NDV_NOT_L3_SLAVE').
Note that 'NDV_NOT_L3_SLAVE' is a negative number, meaning it is not a valid ifindex, so it doesn't break existing programs.I have a patch for iproute2 ready for adding this support in userspace.
Signed-off-by Lahav Schlesinger <[email protected]>Cc David S. Miller <[email protected]>Cc Jakub Kicinski <[email protected]>Cc David Ahern <[email protected]>--- include/uapi/linux/neighbour.h | 2 ++ net/core/neighbour.c | 3 +++ 2 files changed, 5 insertions(+)include/uapi/linux/neighbour.h +2
-0@@ -196,4 +196,6 @@ enum { };#define NFEA_MAX (__NFEA_MAX - 1) +#define NDV_NOT_L3_SLAVE (-10) +#endif net/core/neighbour.c +0
-0@@ -2529,6 +2529,9 @@ static bool neigh_master_filtered(struct net_device *dev, int master_idx) {struct net_device *master;Quoted 10 lines
net/core/neighbour.c static bool neigh_master_filtered(struct net_device *dev, int master_idx) · line 2537
Quoted 7 lines
net/core/neighbour.c +3
-0+if (master_idx ==NDV_NOT_L3_SLAVE ) +return netif_is_l3_slave (dev); +if (!master_idx)return false;you can not special case VRFs like this, and such a feature should apply to links and addresses as well.
Quoted 6 lines
Understandable, I'll change it.
In this case though, how would you advice to efficiently filter neighbours for interfaces in the default VRF in userspace (without quering the master of every interface that is being dumped)? I reckoned that because there's support in iproute2 for filtering based on a specific VRF, filtering for the default VRF is a natural extension
iproute2 has support for a link database (ll_cache). You would basically have to expand the cache to track any master device a link is associated with and then fill the cache with a link dump first. It's expensive at scale; the "no stats" filter helps a bit.
This is the reason for kernel side filtering on primary attributes (coarse grain filtering at reasonable cost).
Quoted 11 lines
Quoted 7 lines
One idea is to pass "
*_MASTER" as -1 (use "none" keyword for iproute2) and then update kernel side to only return entries if the corresponding device is not enslaved to another device. Unfortunately since I did not check that_MASTERwas non-zero in the current code, we can not use 0 as a valid flag for "not enslaved". Be sure to document why -1 is used.Do you mean the command will look like "ip link show master none"? If so, wouldn't this cause an ambiguity if an interface names "none" is present?
You could always detect "none" as a valid device name and error out or use "nomaster" as a way to say "show all devices not enslaved to a bridge or VRF.
Quoted 68 lines · David Ahern
Quoted 60 lines · Lahav Schlesinger
Quoted 48 lines · David Ahern
Quoted 47 lines · Lahav Schlesinger
Currently there's support for filtering neighbours for interfaces which are in a specific VRF (passing the VRF interface in '
NDA_MASTER'), but there's not support for filtering interfaces which are not in an L3 domain (the "default VRF").This means userspace is unable to show/flush neighbours in the default VRF (in contrast to a "real" VRF - Using "ip neigh show vrf <
vrf_dev>").Therefore for userspace to be able to do so, it must manually iterate over all the interfaces, check each one if it's in the default VRF, and if so send the matching flush/show message.
This patch adds the ability to do so easily, by passing a dummy value as the '
NDA_MASTER' ('NDV_NOT_L3_SLAVE').
Note that 'NDV_NOT_L3_SLAVE' is a negative number, meaning it is not a valid ifindex, so it doesn't break existing programs.I have a patch for iproute2 ready for adding this support in userspace.
Signed-off-by Lahav Schlesinger <[email protected]>Cc David S. Miller <[email protected]>Cc Jakub Kicinski <[email protected]>Cc David Ahern <[email protected]>--- include/uapi/linux/neighbour.h | 2 ++ net/core/neighbour.c | 3 +++ 2 files changed, 5 insertions(+)include/uapi/linux/neighbour.h +2
-0@@ -196,4 +196,6 @@ enum { };#define NFEA_MAX (__NFEA_MAX - 1) +#define NDV_NOT_L3_SLAVE (-10) +#endif net/core/neighbour.c +0
-0@@ -2529,6 +2529,9 @@ static bool neigh_master_filtered(struct net_device *dev, int master_idx) {struct net_device *master;Quoted 10 lines
net/core/neighbour.c static bool neigh_master_filtered(struct net_device *dev, int master_idx) · line 2537
Quoted 7 lines
net/core/neighbour.c +3
-0+if (master_idx ==NDV_NOT_L3_SLAVE ) +return netif_is_l3_slave (dev); +if (!master_idx)return false;you can not special case VRFs like this, and such a feature should apply to links and addresses as well.
Quoted 6 lines
Understandable, I'll change it.
In this case though, how would you advice to efficiently filter neighbours for interfaces in the default VRF in userspace (without quering the master of every interface that is being dumped)? I reckoned that because there's support in iproute2 for filtering based on a specific VRF, filtering for the default VRF is a natural extension
Quoted 8 lines
iproute2 has support for a link database (
ll_cache). You would basically have to expand the cache to track any master device a link is associated with and then fill the cache with a link dump first. It's expensive at scale; the "no stats" filter helps a bit.This is the reason for kernel side filtering on primary attributes (coarse grain filtering at reasonable cost).
Nice, didn't know about the ll_cache.
Does filtering based on being in the default VRF is something you think can be merged into iproute2 (say with "novrf" keyword, following the "nomaster" convention below - e.g. "ip link show novrf")?
If so I'll add it as a patch to iproute2.
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
One idea is to pass "
*_MASTER" as -1 (use "none" keyword for iproute2) and then update kernel side to only return entries if the corresponding device is not enslaved to another device. Unfortunately since I did not check that_MASTERwas non-zero in the current code, we can not use 0 as a valid flag for "not enslaved". Be sure to document why -1 is used.
Quoted 7 lines
Quoted 3 lines
Do you mean the command will look like "ip link show master none"? If so, wouldn't this cause an ambiguity if an interface names "none" is present?
You could always detect "none" as a valid device name and error out or use "nomaster" as a way to say "show all devices not enslaved to a bridge or VRF.
I think "nomaster" sounds reasonable, especially since it's already has a meaning with "ip link set".
Quoted 19 lines · Lahav Schlesinger
Quoted 10 lines
Quoted 9 lines
Quoted 2 lines
you can not special case VRFs like this, and such a feature should apply to links and addresses as well.
Understandable, I'll change it.
In this case though, how would you advice to efficiently filter neighbours for interfaces in the default VRF in userspace (without quering the master of every interface that is being dumped)? I reckoned that because there's support in iproute2 for filtering based on a specific VRF, filtering for the default VRF is a natural extensionQuoted 8 lines
iproute2 has support for a link database (
ll_cache). You would basically have to expand the cache to track any master device a link is associated with and then fill the cache with a link dump first. It's expensive at scale; the "no stats" filter helps a bit.This is the reason for kernel side filtering on primary attributes (coarse grain filtering at reasonable cost).
Quoted 5 lines
Nice, didn't know about the
ll_cache.
Does filtering based on being in the default VRF is something you think can be merged into iproute2 (say with "novrf" keyword, following the "nomaster" convention below - e.g. "ip link show novrf")?
If so I'll add it as a patch to iproute2.
yes. There is also an outstanding request to show the vrf of neighbor entries (e.g., add a new column at the end with vrf) when doing a full dump.