lirc-tools: new package
PATCH v3 1/1 lirc-tools: new package
1. What I was trying to say, that there is no point in using this package unless the lirc kernel package has been selected.
Should this be added as a dependency, rather than just on BR2_LINUX_KERNEL?
2. Noted re the personal notes.
3. I'll look at added the license details
4.
Quoted 1 line
Please remove this part
Is this the part you mean?
Quoted 2 lines
. > +# lcdproc
+#
Thanks
Rhys
----------------------------------------
From: "Baruch Siach" <[email protected]>
Sent: Tuesday, March 24, 2015 7:17 PM
To: "Rhys Williams" <[email protected]>
Subject: Re: [Buildroot] [PATCH v3] lirc-tools: new package
Hi Rhys,
Quoted 2 lines · Rhys Williams
This package adds the userspace tools LIRC - Linux remote control. The Kernel package will need to be selected.
In this case the package should depend on BR2_LINUX_KERNEL. But are you sure
of this? The text at http://www.lirc.org/html/install.html#compiling says:
As of 0.9.1+, lirc uses the kernel modules from the official kernel. Some
of these are formerly lirc modules which are now part of the kernel. Thus,
building lirc does not involve building kernel modules (as it used to
be).
Quoted 1 line
Thanks to Baruch for help so far.
This line should not be part of the commit log that is kept forever in the
Buildroot git history. You may add "personal" comments below the --- separator...
Quoted 2 lines
Signed-off-by Rhys Williams---
... here.
Quoted 3 lines
package/Config.in | 1 + package/lirc-tools/Config.in | 15 +++++++++++++++ package/lirc-tools/S25lircd | 38
++++++++++++++++++++++++++++++++++++++
Quoted 7 lines
package/lirc-tools/lirc-tools.hash | 2 ++ package/lirc-tools/lirc-tools.mk | 20 ++++++++++++++++++++ 5 files changed, 76 insertions(+) create mode 100644 package/lirc-tools/Config.in create mode 100755 package/lirc-tools/S25lircd create mode 100644 package/lirc-tools/lirc-tools.hash create mode 100644 package/lirc-tools/lirc-tools.mk
[...]
package/lirc-tools/lirc-tools.mk
Quoted 8 lines
package/lirc-tools/lirc-tools.mk new file +0
-0@@ -0,0 +1,20 @@
+###########################################################################
#####
package/lirc-tools/lirc-tools.mk line 3
Quoted 4 lines
package/lirc-tools/lirc-tools.mk new file +3
-0+# +# lirc-tools +#
+###########################################################################
#####
package/lirc-tools/lirc-tools.mk line 7
Quoted 4 lines
package/lirc-tools/lirc-tools.mk new file +4
-0+ +LIRC_TOOLS_VERSION = 0.9.2 +LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 +LIRC_TOOLS_SITE =
http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION)/
I forgot to mention that earlier, but please add license information here. See
the description of _LICENSE and _LICENSE_FILES in the manual at
http://nightly.buildroot.org/manual.html#_infrastructure_for_packages_with_specific_build_systems.
package/lirc-tools/lirc-tools.mk line 9
Quoted 2 lines
package/lirc-tools/lirc-tools.mk new file +2
-0+ +LIRC_TOOLS_CONF_OPTS = --without-x --enable-sandboxed
--with-driver=userspace
package/lirc-tools/lirc-tools.mk line 12
Quoted 3 lines
package/lirc-tools/lirc-tools.mk new file +3
-0+ +define LIRC_TOOLS_INSTALL_INIT_SYSV + $(INSTALL) -D -m 0755 package/lirc-tools/S25lircd
$(TARGET_DIR)/etc/init.d/
package/lirc-tools/lirc-tools.mk line 18
Quoted 6 lines
package/lirc-tools/lirc-tools.mk new file +6
-0+endef + +$(eval $(autotools-package)) +# +# lcdproc +#
Please remove this part.
baruch
Signature · 6 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open
Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH v3 1/1 lirc-tools: new package
Hi Rhys,
Quoted 2 lines · github at wilberforce.co.nz
1. What I was trying to say, that there is no point in using this package unless the lirc kernel package has been selected.
So please add this note in the Config.in help section.
Quoted 1 line
Should this be added as a dependency, rather than just on
BR2_LINUX_KERNEL?
No need to add a dependency on BR2_LINUX_KERNEL, since the lirc package does not build kernel modules itself.
Quoted 10 lines
2. Noted re the personal notes.
3. I'll look at added the license details
4.
Quoted 1 line
Please remove this part
Is this the part you mean?
Quoted 2 lines
. > +# lcdproc
+#
Yes.
baruch
Quoted 94 lines
----------------------------------------
From: "Baruch Siach" <[email protected]>
Sent: Tuesday, March 24, 2015 7:17 PM
To: "Rhys Williams" <[email protected]>
Subject: Re: [Buildroot] [PATCH v3] lirc-tools: new packageHi Rhys,
Quoted 2 lines · Rhys Williams
This package adds the userspace tools LIRC - Linux remote control. The Kernel package will need to be selected.
In this case the package should depend on
BR2_LINUX_KERNEL. But are you sure
of this? The text at http://www.lirc.org/html/install.html#compiling says:As of 0.9.1+, lirc uses the kernel modules from the official kernel. Some
of these are formerly lirc modules which are now part of the kernel. Thus,
building lirc does not involve building kernel modules (as it used to
be).Quoted 1 line
Thanks to Baruch for help so far.
This line should not be part of the commit log that is kept forever in the
Buildroot git history. You may add "personal" comments below the --- separator...
Quoted 2 lines
Signed-off-by Rhys Williams---
... here.
Quoted 3 lines
package/Config.in | 1 + package/lirc-tools/Config.in | 15 +++++++++++++++ package/lirc-tools/S25lircd | 38++++++++++++++++++++++++++++++++++++++
Quoted 7 lines
package/lirc-tools/lirc-tools.hash | 2 ++ package/lirc-tools/lirc-tools.mk | 20 ++++++++++++++++++++ 5 files changed, 76 insertions(+) create mode 100644 package/lirc-tools/Config.in create mode 100755 package/lirc-tools/S25lircd create mode 100644 package/lirc-tools/lirc-tools.hash create mode 100644 package/lirc-tools/lirc-tools.mk[...]
package/lirc-tools/lirc-tools.mk
Quoted 8 lines
package/lirc-tools/lirc-tools.mk new file +0
-0@@ -0,0 +1,20 @@+###########################################################################
#####package/lirc-tools/lirc-tools.mk line 3
Quoted 4 lines
package/lirc-tools/lirc-tools.mk new file +3
-0+# +# lirc-tools +#+###########################################################################
#####package/lirc-tools/lirc-tools.mk line 7
Quoted 4 lines
package/lirc-tools/lirc-tools.mk new file +4
-0+ +LIRC_TOOLS_VERSION = 0.9.2 +LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 +LIRC_TOOLS_SITE =http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION)/
I forgot to mention that earlier, but please add license information here. See
the description of_LICENSEand_LICENSE_FILESin the manual at
http://nightly.buildroot.org/manual.html#_infrastructure_for_packages_with_specific_build_systems.package/lirc-tools/lirc-tools.mk line 9
Quoted 2 lines
package/lirc-tools/lirc-tools.mk new file +2
-0+ +LIRC_TOOLS_CONF_OPTS = --without-x --enable-sandboxed--with-driver=userspace
package/lirc-tools/lirc-tools.mk line 12
Quoted 3 lines
package/lirc-tools/lirc-tools.mk new file +3
-0+ +define LIRC_TOOLS_INSTALL_INIT_SYSV + $(INSTALL) -D -m 0755 package/lirc-tools/S25lircd$(TARGET_DIR)/etc/init.d/
package/lirc-tools/lirc-tools.mk line 18
Quoted 6 lines
package/lirc-tools/lirc-tools.mk new file +6
-0+endef + +$(eval $(autotools-package)) +# +# lcdproc +#Please remove this part.
baruch
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -