ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
PATCH 1/1 ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be used e.g. to detect cable insertion and removal.
Signed-off-by Marek Vasut <[email protected]>
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>
--- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +2 -0
@@ -126,6 +126,8 @@ phy0: ethernet-phy@1 { reg = <1>; + interrupt-parent = <&gpioi>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; };
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Marek
Quoted 21 lines · Marek Vasut
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be used e.g. to detect cable insertion and removal.
Signed-off-by Marek Vasut <[email protected]>Cc Alexandre Torgue <[email protected]>Cc Maxime Coquelin <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 2 ++ 1 file changed, 2 insertions(+)arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +0
-0
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi line 133
Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +2
-0@@ -126,6 +126,8 @@ phy0: ethernet-phy@1 { reg = <1>; + interrupt-parent = <&gpioi>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; };
Applied on stm32-next.
Thanks.
Alex
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel