f2fs: delete duplicate information on sysfs nodes
Subsystems (2)
PATCH 1/2 f2fs: delete duplicate information on sysfs nodes
This patch merges the sysfs node documentation present in Documentation/filesystems/f2fs.txt and Documentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information from Documentation/filesystems/f2fs.txt. This is to prevent having to update both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes to Documentation/ABI/testing/sysfs-fs-f2fs.
--- Documentation/ABI/testing/sysfs-fs-f2fs | 220 ++++++++++++------------ Documentation/filesystems/f2fs.txt | 163 +----------------- 2 files changed, 113 insertions(+), 270 deletions(-)
Documentation/ABI/testing/sysfs-fs-f2fs +111 -109
@@ -1,253 +1,255 @@ What: /sys/fs/f2fs/<disk>/gc_max_sleep_time Date: July 2013 Contact: "Namjae Jeon" <[email protected]> -Description: - Controls the maximun sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the maximum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_min_sleep_time Date: July 2013 Contact: "Namjae Jeon" <[email protected]> -Description: - Controls the minimum sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the minimum sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_no_gc_sleep_time Date: July 2013 Contact: "Namjae Jeon" <[email protected]> -Description: - Controls the default sleep time for gc_thread. Time - is in milliseconds. +Description: Controls the default sleep time for gc_thread. Time + is in milliseconds. What: /sys/fs/f2fs/<disk>/gc_idle Date: July 2013 Contact: "Namjae Jeon" <[email protected]> -Description: - Controls the victim selection policy for garbage collection. +Description: Controls the victim selection policy for garbage collection. + Setting gc_idle = 0(default) will disable this option. Setting + gc_idle = 1 will select the Cost Benefit approach & setting + gc_idle = 2 will select the greedy approach. What: /sys/fs/f2fs/<disk>/reclaim_segments Date: October 2013 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the issue rate of segment discard commands. +Description: This parameter controls the number of prefree segments to be + reclaimed. If the number of prefree segments is larger than + the number of segments in the proportion to the percentage + over total volume size, f2fs tries to conduct checkpoint to + reclaim the prefree segments to free segments. + By default, 5% over total # of segments. What: /sys/fs/f2fs/<disk>/ipu_policy Date: November 2013 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the in-place-update policy. +Description: Controls the in-place-update policy. + There are five policies: + 0x01: F2FS_IPU_FORCE, 0x02: F2FS_IPU_SSR, + 0x04: F2FS_IPU_UTIL, 0x08: F2FS_IPU_SSR_UTIL, + 0x10: F2FS_IPU_FSYNC. What: /sys/fs/f2fs/<disk>/min_ipu_util Date: November 2013 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the FS utilization condition for the in-place-update - policies. +Description: Controls the FS utilization condition for the in-place-update + policies. It is used by F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. What: /sys/fs/f2fs/<disk>/min_fsync_blocks Date: September 2014 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the dirty page count condition for the in-place-update - policies. +Description: Controls the dirty page count condition for the in-place-update + policies. What: /sys/fs/f2fs/<disk>/min_seq_blocks Date: August 2018 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the dirty page count condition for batched sequential - writes in ->writepages. - +Description: Controls the dirty page count condition for batched sequential + writes in writepages. What: /sys/fs/f2fs/<disk>/min_hot_blocks Date: March 2017 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the dirty page count condition for redefining hot data. +Description: Controls the dirty page count condition for redefining hot data. What: /sys/fs/f2fs/<disk>/min_ssr_sections Date: October 2017 Contact: "Chao Yu" <[email protected]> -Description: - Controls the fee section threshold to trigger SSR allocation. +Description: Controls the free section threshold to trigger SSR allocation. + If this is large, SSR mode will be enabled early. What: /sys/fs/f2fs/<disk>/max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the issue rate of small discard commands. - -What: /sys/fs/f2fs/<disk>/discard_granularity -Date: July 2017 -Contact: "Chao Yu" <[email protected]> -Description: - Controls discard granularity of inner discard thread, inner thread +Description: Controls the issue rate of discard commands that consist of small + blocks less than 2MB. The candidates to be discarded are cached until + checkpoint is triggered, and issued during the checkpoint. + By default, it is disabled with 0. + +What: /sys/fs/f2fs/<disk>/discard_granularity +Date: July 2017 +Contact: "Chao Yu" <[email protected]> +Description: Controls discard granularity of inner discard thread. Inner thread will not issue discards with size that is smaller than granularity. - The unit size is one block, now only support configuring in range - of [1, 512]. + The unit size is one block(4KB), now only support configuring + in range of [1, 512]. Default value is 4(=16KB). -What: /sys/fs/f2fs/<disk>/umount_discard_timeout -Date: January 2019 -Contact: "Jaegeuk Kim" <[email protected]> -Description: - Set timeout to issue discard commands during umount. - Default: 5 secs +What: /sys/fs/f2fs/<disk>/umount_discard_timeout +Date: January 2019 +Contact: "Jaegeuk Kim" <[email protected]> +Description: Set timeout to issue discard commands during umount. + Default: 5 secs What: /sys/fs/f2fs/<disk>/max_victim_search Date: January 2014 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the number of trials to find a victim segment. +Description: Controls the number of trials to find a victim segment + when conducting SSR and cleaning operations. The default value + is 4096 which covers 8GB block address range. What: /sys/fs/f2fs/<disk>/migration_granularity Date: October 2018 Contact: "Chao Yu" <[email protected]> -Description: - Controls migration granularity of garbage collection on large - section, it can let GC move partial segment{s} of one section - in one GC cycle, so that dispersing heavy overhead GC to - multiple lightweight one. +Description: Controls migration granularity of garbage collection on large + section, it can let GC move partial segment{s} of one section + in one GC cycle, so that dispersing heavy overhead GC to + multiple lightweight one. What: /sys/fs/f2fs/<disk>/dir_level Date: March 2014 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the directory level for large directory. +Description: Controls the directory level for large directory. If a + directory has a number of files, it can reduce the file lookup + latency by increasing this dir_level value. Otherwise, it + needs to decrease this value to reduce the space overhead. + The default value is 0. What: /sys/fs/f2fs/<disk>/ram_thresh Date: March 2014 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the memory footprint used by f2fs. +Description: Controls the memory footprint used by free nids and cached + nat entries. By default, 10 is set, which indicates + 10 MB / 1 GB RAM. What: /sys/fs/f2fs/<disk>/batched_trim_sections Date: February 2015 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the trimming rate in batch mode. - <deprecated> +Description: Controls the trimming rate in batch mode. + <deprecated> What: /sys/fs/f2fs/<disk>/cp_interval Date: October 2015 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the checkpoint timing. +Description: Controls the checkpoint timing, set to 60 seconds by default. What: /sys/fs/f2fs/<disk>/idle_interval Date: January 2016 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls the idle timing for all paths other than - discard and gc path. +Description: Controls the idle timing for all paths other than + discard and gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/discard_idle_interval Date: September 2018 Contact: "Chao Yu" <[email protected]> Contact: "Sahitya Tummala" <[email protected]> -Description: - Controls the idle timing for discard path. +Description: Controls the idle timing for discard path. What: /sys/fs/f2fs/<disk>/gc_idle_interval Date: September 2018 Contact: "Chao Yu" <[email protected]> Contact: "Sahitya Tummala" <[email protected]> -Description: - Controls the idle timing for gc path. +Description: Controls the idle timing for gc path. Set to 5 seconds by default. What: /sys/fs/f2fs/<disk>/iostat_enable Date: August 2017 Contact: "Chao Yu" <[email protected]> -Description: - Controls to enable/disable IO stat. +Description: Controls to enable/disable IO stat. What: /sys/fs/f2fs/<disk>/ra_nid_pages Date: October 2015 Contact: "Chao Yu" <[email protected]> -Description: - Controls the count of nid pages to be readaheaded. +Description: Controls the count of nid pages to be readaheaded. + When building free nids, F2FS reads NAT blocks ahead for + speed up. Default is 0. What: /sys/fs/f2fs/<disk>/dirty_nats_ratio Date: January 2016 Contact: "Chao Yu" <[email protected]> -Description: - Controls dirty nat entries ratio threshold, if current - ratio exceeds configured threshold, checkpoint will - be triggered for flushing dirty nat entries. +Description: Controls dirty nat entries ratio threshold, if current + ratio exceeds configured threshold, checkpoint will + be triggered for flushing dirty nat entries. What: /sys/fs/f2fs/<disk>/lifetime_write_kbytes Date: January 2016 Contact: "Shuoran Liu" <[email protected]> -Description: - Shows total written kbytes issued to disk. +Description: Shows total written kbytes issued to disk. What: /sys/fs/f2fs/<disk>/features Date: July 2017 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Shows all enabled features in current device. +Description: Shows all enabled features in current device. What: /sys/fs/f2fs/<disk>/inject_rate Date: May 2016 Contact: "Sheng Yong" <[email protected]> -Description: - Controls the injection rate. +Description: Controls the injection rate of arbitrary faults. What: /sys/fs/f2fs/<disk>/inject_type Date: May 2016 Contact: "Sheng Yong" <[email protected]> -Description: - Controls the injection type. +Description: Controls the injection type of arbitrary faults. + +What: /sys/fs/f2fs/<disk>/dirty_segments +Date: October 2017 +Contact: "Jaegeuk Kim" <[email protected]> +Description: Shows the number of dirty segments. What: /sys/fs/f2fs/<disk>/reserved_blocks Date: June 2017 Contact: "Chao Yu" <[email protected]> -Description: - Controls target reserved blocks in system, the threshold - is soft, it could exceed current available user space. +Description: Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. What: /sys/fs/f2fs/<disk>/current_reserved_blocks Date: October 2017 Contact: "Yunlong Song" <[email protected]> Contact: "Chao Yu" <[email protected]> -Description: - Shows current reserved blocks in system, it may be temporarily - smaller than target_reserved_blocks, but will gradually - increase to target_reserved_blocks when more free blocks are - freed by user later. +Description: Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs/<disk>/gc_urgent Date: August 2017 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Do background GC agressively +Description: Do background GC agressively when set. When gc_urgent = 1, + background thread starts to do GC by given gc_urgent_sleep_time + interval. It is set to 0 by default. What: /sys/fs/f2fs/<disk>/gc_urgent_sleep_time Date: August 2017 Contact: "Jaegeuk Kim" <[email protected]> -Description: - Controls sleep time of GC urgent mode +Description: Controls sleep time of GC urgent mode. Set to 500ms by default. What: /sys/fs/f2fs/<disk>/readdir_ra Date: November 2017 Contact: "Sheng Yong" <[email protected]> -Description: - Controls readahead inode block in readdir. +Description: Controls readahead inode block in readdir. Enabled by default. + +What: /sys/fs/f2fs/<disk>/gc_pin_file_thresh +Date: January 2018 +Contact: Jaegeuk Kim <[email protected]> +Description: This indicates how many GC can be failed for the pinned + file. If it exceeds this, F2FS doesn't guarantee its pinning + state. 2048 trials is set by default. What: /sys/fs/f2fs/<disk>/extension_list Date: Feburary 2018 Contact: "Chao Yu" <[email protected]> -Description: - Used to control configure extension list: - - Query: cat /sys/fs/f2fs/<disk>/extension_list - - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list - - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list - - [h] means add/del hot file extension - - [c] means add/del cold file extension +Description: Used to control configure extension list: + - Query: cat /sys/fs/f2fs/<disk>/extension_list + - Add: echo '[h/c]extension' > /sys/fs/f2fs/<disk>/extension_list + - Del: echo '[h/c]!extension' > /sys/fs/f2fs/<disk>/extension_list + - [h] means add/del hot file extension + - [c] means add/del cold file extension What: /sys/fs/f2fs/<disk>/unusable Date April 2019 Contact: "Daniel Rosenberg" <[email protected]> -Description: - If checkpoint=disable, it displays the number of blocks that are unusable. - If checkpoint=enable it displays the enumber of blocks that would be unusable - if checkpoint=disable were to be set. +Description: If checkpoint=disable, it displays the number of blocks that are unusable. + If checkpoint=enable it displays the enumber of blocks that would be unusable + if checkpoint=disable were to be set.
Documentation/filesystems/f2fs.txt +2 -161
170 lines not on this page · raw message
Signature · 1 line
2.23.0.866.gb869b98d4c-goog
PATCH 2/2 f2fs: Add f2fs stats to sysfs
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
--- Documentation/ABI/testing/sysfs-fs-f2fs | 47 +++++++++++ fs/f2fs/debug.c | 2 +- fs/f2fs/f2fs.h | 2 + fs/f2fs/sysfs.c | 103 ++++++++++++++++++++++++ 4 files changed, 153 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-fs-f2fs +47 -0
@@ -253,3 +253,50 @@ Contact: "Daniel Rosenberg" <[email protected]> Description: If checkpoint=disable, it displays the number of blocks that are unusable. If checkpoint=enable it displays the enumber of blocks that would be unusable if checkpoint=disable were to be set. + +What: /sys/fs/f2fs/<disk>/free_segments +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of free segments in disk. + +What: /sys/fs/f2fs/<disk>/cp_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of checkpoint operations performed on demand. Available when + CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/cp_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of checkpoint operations performed in the background to + free segments. Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_foreground_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of garbage collection operations performed on demand. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/gc_background_calls +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of garbage collection operations triggered in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_foreground +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of blocks moved by garbage collection in foreground. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/moved_blocks_background +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Number of blocks moved by garbage collection in background. + Available when CONFIG_F2FS_STAT_FS=y. + +What: /sys/fs/f2fs/<disk>/avg_vblocks +Date: September 2019 +Contact: "Hridya Valsaraju" <[email protected]> +Description: Average number of valid blocks. + Available when CONFIG_F2FS_STAT_FS=y.
fs/f2fs/debug.c +1 -1
@@ -148,7 +148,7 @@ static void update_general_status(struct f2fs_sb_info *sbi)/* * This function calculates BDF of every segments */ -static void update_sit_info (struct f2fs_sb_info *sbi) +void update_sit_info (struct f2fs_sb_info *sbi) {struct f2fs_stat_info *si =F2FS_STAT (sbi);unsigned long long blks_per_sec, hblks_per_sec, total_vblocks;
fs/f2fs/f2fs.h +2 -0
@@ -3391,6 +3391,7 @@ int f2fs_build_stats(struct f2fs_sb_info *sbi);void f2fs_destroy_stats (struct f2fs_sb_info *sbi);void __init f2fs_create_root_stats (void );void f2fs_destroy_root_stats (void ); +void update_sit_info (struct f2fs_sb_info *sbi);#else #define stat_inc_cp_count (si) do { } while (0)#define stat_inc_bg_cp_count (si) do { } while (0)
@@ -3429,6 +3430,7 @@ static inline int f2fs_build_stats(struct f2fs_sb_info *sbi) { return 0; }static inline void f2fs_destroy_stats (struct f2fs_sb_info *sbi) { }static inline void __init f2fs_create_root_stats (void ) { }static inline void f2fs_destroy_root_stats (void ) { } +static inline void update_sit_info (struct f2fs_sb_info *sbi) {}#endif extern const struct file_operations f2fs_dir_operations;
fs/f2fs/sysfs.c +103 -0
137 lines not on this page · raw message
Signature · 1 line
2.23.0.866.gb869b98d4c-goog
Re: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thanks,
Re: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 7 lines · Chao Yu
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thank you for taking a look at the patch Chao. We will not be mounting debugfs for security reasons.
Regards,
Hridya
Quoted 2 lines
Thanks,
_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 11 lines · Hridya Valsaraju
Quoted 7 lines · Chao Yu
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thank you for taking a look at the patch Chao. We will not be mounting debugfs for security reasons.
Hi, Hridya,
May I ask is there any use case for those new entries?
So many sysfs entries exist, if there is real use case, how about backuping entire /d/f2fs/status entry into /proc/fs/f2fs/<dev>/ directory rather than adding some of stats as a single entry in sysfs directory?
Thanks,
Quoted 8 lines
Regards,
HridyaQuoted 2 lines
Thanks,
.
Jaegeuk Kim
maintainerRe: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 13 lines · Chao Yu
Quoted 11 lines · Hridya Valsaraju
Quoted 7 lines · Chao Yu
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thank you for taking a look at the patch Chao. We will not be mounting debugfs for security reasons.
Quoted 7 lines
Hi, Hridya,
May I ask is there any use case for those new entries?
So many sysfs entries exist, if there is real use case, how about backuping entire /d/f2fs/status entry into /proc/fs/f2fs/<dev>/ directory rather than adding some of stats as a single entry in sysfs directory?
These will be useful to keep a track on f2fs health status by one value per entry, which doesn't require user-land parsing stuff. Of course, Android can exploit them by IdleMaint, rollback feature, and so on.
Quoted 11 lines
Thanks,
Quoted 8 lines
Regards,
HridyaQuoted 2 lines
Thanks,
.
Re: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 18 lines · Jaegeuk Kim
Quoted 17 lines · Chao Yu
Quoted 11 lines · Hridya Valsaraju
Quoted 7 lines · Chao Yu
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thank you for taking a look at the patch Chao. We will not be mounting debugfs for security reasons.
Hi, Hridya,
May I ask is there any use case for those new entries?
Quoted 7 lines
Quoted 3 lines
So many sysfs entries exist, if there is real use case, how about backuping entire /d/f2fs/status entry into /proc/fs/f2fs/<dev>/ directory rather than adding some of stats as a single entry in sysfs directory?
These will be useful to keep a track on f2fs health status by one value per entry, which doesn't require user-land parsing stuff. Of course, Android can exploit them by IdleMaint, rollback feature, and so on.
Alright, I suggest to add a sub-directory for those statistic entries, we can manage them more easily isolated from those existed switch entries.
Thanks,
Quoted 14 lines
Quoted 12 lines
Thanks,
Quoted 8 lines
Regards,
HridyaQuoted 2 lines
Thanks,
.
.
Re: [PATCH 2/2] f2fs: Add f2fs stats to sysfs
Quoted 24 lines · Chao Yu
Quoted 22 lines · Jaegeuk Kim
Quoted 20 lines · Chao Yu
Quoted 11 lines · Hridya Valsaraju
Quoted 7 lines · Chao Yu
Quoted 3 lines · Hridya Valsaraju
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted.
Why don't we mount debugfs first?
Thank you for taking a look at the patch Chao. We will not be mounting debugfs for security reasons.
Hi, Hridya,
May I ask is there any use case for those new entries?
So many sysfs entries exist, if there is real use case, how about backuping entire /d/f2fs/status entry into /proc/fs/f2fs/<dev>/ directory rather than adding some of stats as a single entry in sysfs directory?
Quoted 6 lines
Quoted 3 lines
These will be useful to keep a track on f2fs health status by one value per entry, which doesn't require user-land parsing stuff. Of course, Android can exploit them by IdleMaint, rollback feature, and so on.
Alright, I suggest to add a sub-directory for those statistic entries, we can manage them more easily isolated from those existed switch entries.
Thank you Chao and Jaegeuk. I will make this change and send out a new version.
Regards,
Hridya
Quoted 17 lines
Thanks,
Quoted 14 lines
Quoted 12 lines
Thanks,
Quoted 8 lines
Regards,
HridyaQuoted 2 lines
Thanks,
.
.
Quoted 8 lines · Hridya Valsaraju
This patch merges the sysfs node documentation present in
Documentation/filesystems/f2fs.txtandDocumentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information fromDocumentation/filesystems/f2fs.txt. This is to prevent having to update both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes toDocumentation/ABI/testing/sysfs-fs-f2fs.
Jaegeuk, any particular reason to add duplicated description on f2fs.txt previously?
Thanks,
Jaegeuk Kim
maintainerQuoted 11 lines · Chao Yu
Quoted 8 lines · Hridya Valsaraju
This patch merges the sysfs node documentation present in
Documentation/filesystems/f2fs.txtandDocumentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information fromDocumentation/filesystems/f2fs.txt. This is to prevent having to update both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes toDocumentation/ABI/testing/sysfs-fs-f2fs.Jaegeuk, any particular reason to add duplicated description on f2fs.txt previously?
Not at all, thus, I asked Hridya to consolidate them. :P
Quoted 2 lines
Thanks,
Chao Yu
Reviewed-byQuoted 11 lines · Jaegeuk Kim
Quoted 10 lines · Chao Yu
Quoted 8 lines · Hridya Valsaraju
This patch merges the sysfs node documentation present in
Documentation/filesystems/f2fs.txtandDocumentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information fromDocumentation/filesystems/f2fs.txt. This is to prevent having to update both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes toDocumentation/ABI/testing/sysfs-fs-f2fs.
Quoted 3 lines
Quoted 1 line
Jaegeuk, any particular reason to add duplicated description on f2fs.txt previously?
Not at all, thus, I asked Hridya to consolidate them. :P
Alright...
Thanks,
Quoted 5 lines
Quoted 3 lines
Thanks,
.