Add Intel Agilex SoC support
Subsystems (3)
cover Add Intel Agilex SoC support
This patchset add Intel Agilex SoC[1] support.
Intel Agilex SoC is with a 64-bit quad core ARM Cortex-A53 MPCore hard processor system (HPS). New IPs in Agilex are CCU, clock manager and SDRAM, other IPs have minor changes compared to Stratix 10.
Intel Agilex HPS TRM:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/agilex/mnl-1100.pdf
[1]: https://www.intel.com/content/www/us/en/products/programmable/fpga/agilex.html
Ley Foon Tan (14):
arm: socfpga: agilex: Add base address for Intel Agilex SoC
arm: socfpga: Move firewall code to firewall file
arm: socfpga: Move Stratix10 and Agilex reset manager common code
arm: socfpga: agilex: Add reset manager support
arm: socfpga: Move Stratix10 and Agilex system manager common code
arm: socfpga: agilex: Add system manager support
arm: socfpga: agilex: Add clock manager support
arm: socfpga: agilex: Add CCU support for Agilex
ddr: altera: Restructure Stratix 10 SDRAM driver
ddr: altera: agilex: Add SDRAM driver for Agilex
board: intel: agilex: Add socdk board support for Intel Agilex SoC
arm: socfpga: agilex: Add SPL for Agilex SoC
arm: dts: agilex: Add base dtsi and devkit dts
arm: socfpga: agilex: Enable Agilex SoC build
arch/arm/Kconfig | 4 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/socfpga_agilex.dtsi | 459 ++++++++++++++
arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 59 ++
arch/arm/dts/socfpga_agilex_socdk.dts | 131 ++++
arch/arm/mach-socfpga/Kconfig | 13 +
arch/arm/mach-socfpga/Makefile | 18 +
arch/arm/mach-socfpga/ccu_agilex.c | 99 +++
arch/arm/mach-socfpga/clock_manager_agilex.c | 582 ++++++++++++++++++
arch/arm/mach-socfpga/firewall.c | 97 +++
.../include/mach/base_addr_agilex.h | 38 ++
.../mach-socfpga/include/mach/ccu_agilex.h | 67 ++
.../mach-socfpga/include/mach/clock_manager.h | 2 +
.../include/mach/clock_manager_agilex.h | 328 ++++++++++
.../mach/{firewall_s10.h => firewall.h} | 10 +-
.../mach-socfpga/include/mach/reset_manager.h | 29 +
.../include/mach/reset_manager_agilex.h | 38 ++
.../include/mach/reset_manager_s10.h | 80 ---
.../include/mach/system_manager.h | 53 ++
..._manager_s10.h => system_manager_agilex.h} | 89 +--
.../include/mach/system_manager_s10.h | 46 --
arch/arm/mach-socfpga/reset_manager.c | 9 +-
arch/arm/mach-socfpga/spl_agilex.c | 105 ++++
arch/arm/mach-socfpga/spl_s10.c | 84 +--
board/intel/agilex-socdk/MAINTAINERS | 7 +
board/intel/agilex-socdk/Makefile | 7 +
board/intel/agilex-socdk/socfpga.c | 7 +
configs/socfpga_agilex_defconfig | 57 ++
drivers/ddr/altera/Kconfig | 6 +-
drivers/ddr/altera/Makefile | 3 +-
drivers/ddr/altera/sdram_agilex.c | 158 +++++
drivers/ddr/altera/sdram_common.c | 308 +++++++++
.../altera/{sdram_s10.h => sdram_common.h} | 75 +--
drivers/ddr/altera/sdram_s10.c | 302 +--------
drivers/ddr/altera/sdram_s10.h | 148 -----
include/configs/socfpga_agilex_socdk.h | 220 +++++++
36 files changed, 2966 insertions(+), 773 deletions(-)
create mode 100644 arch/arm/dts/socfpga_agilex.dtsi
create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts
create mode 100644 arch/arm/mach-socfpga/ccu_agilex.c
create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c
create mode 100644 arch/arm/mach-socfpga/firewall.c
create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_agilex.h
create mode 100644 arch/arm/mach-socfpga/include/mach/ccu_agilex.h
create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
rename arch/arm/mach-socfpga/include/mach/{firewall_s10.h => firewall.h} (94%)
create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_agilex.h
copy arch/arm/mach-socfpga/include/mach/{system_manager_s10.h => system_manager_agilex.h} (51%)
create mode 100644 arch/arm/mach-socfpga/spl_agilex.c
create mode 100644 board/intel/agilex-socdk/MAINTAINERS
create mode 100644 board/intel/agilex-socdk/Makefile
create mode 100644 board/intel/agilex-socdk/socfpga.c
create mode 100644 configs/socfpga_agilex_defconfig
create mode 100644 drivers/ddr/altera/sdram_agilex.c
create mode 100644 drivers/ddr/altera/sdram_common.c
copy drivers/ddr/altera/{sdram_s10.h => sdram_common.h} (78%)
create mode 100644 include/configs/socfpga_agilex_socdk.hSignature · 1 line
2.19.0
PATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
Add base address for Intel Agilex SoC.
--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_agilex.h
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +38 -0
@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100 +#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000 +#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */
Signature · 1 line
2.19.0
Dinh Nguyen
maintainerPATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
Quoted 43 lines · Ley Foon Tan
Add base address for Intel Agilex SoC.
Signed-off-by Ley Foon Tan <[email protected]>--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_agilex.harch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +28
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h line 38
Quoted 10 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +10
-0+#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000 +#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */
All of these addresses are identical to the Stratix10, couldn't you just use the Stratix10 and any diffs, you can just use fdt?
Dinh
PATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
Am 10.05.2019 um 16:59 schrieb Dinh Nguyen:
Quoted 51 lines · Ley Foon Tan
Quoted 48 lines
Add base address for Intel Agilex SoC.
Signed-off-by Ley Foon Tan <[email protected]>--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+)create mode 100644
arch/arm/mach-socfpga/include/mach/base_addr_agilex.harch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +34
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100 +#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000
Quoted 8 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h line 38
Quoted 5 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +4
-0+#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */ All of these addresses are identical to the Stratix10, couldn't you just use the Stratix10 and any diffs, you can just use fdt?
Would it make sense to only add the addresses that are actually needed as constants? I'd expect that most (if not all) of them could come from devicetree?
Regards,
Simon
PATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
Quoted 62 lines · Simon Goldschmidt
Am 10.05.2019 um 16:59 schrieb Dinh Nguyen:
Quoted 51 lines · Ley Foon Tan
Quoted 48 lines
Add base address for Intel Agilex SoC.
Signed-off-by Ley Foon Tan <[email protected]>--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+)create mode 100644
arch/arm/mach-socfpga/include/mach/base_addr_agilex.harch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +34
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100 +#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000Quoted 8 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h line 38
Quoted 5 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +4
-0+#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */ All of these addresses are identical to the Stratix10, couldn't you just use the Stratix10 and any diffs, you can just use fdt?
Quoted 6 lines
Would it make sense to only add the addresses that are actually needed as constants? I'd expect that most (if not all) of them could come from devicetree?
Regards,
Simon
Yes, these are only the requires #define. Those components that can get from DT already remove, eg: SDRAM base etc.
Regards
Ley Foon
PATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
Quoted 65 lines · Ley Foon Tan
Quoted 62 lines · Simon Goldschmidt
Am 10.05.2019 um 16:59 schrieb Dinh Nguyen:
Quoted 59 lines · Ley Foon Tan
Quoted 43 lines
Add base address for Intel Agilex SoC.
Signed-off-by Ley Foon Tan <[email protected]>--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+)create mode 100644
arch/arm/mach-socfpga/include/mach/base_addr_agilex.harch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +28
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100arch/arm/mach-socfpga/include/mach/base_addr_agilex.h line 38
Quoted 10 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +10
-0+#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000 +#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */ All of these addresses are identical to the Stratix10, couldn't you just use the Stratix10 and any diffs, you can just use fdt?
Quoted 8 lines
Quoted 6 lines
Would it make sense to only add the addresses that are actually needed as constants? I'd expect that most (if not all) of them could come from devicetree?
Regards,
SimonYes, these are only the requires #define. Those components that can get from DT already remove, eg: SDRAM base etc.
Are these defines really all used in the code? I haven't seen that. But if it's so,
then it's probably ok... Although I would rather like to see more dm drivers...
Regards,
Simon
PATCH 1/14 arm: socfpga: agilex: Add base address for Intel Agilex SoC
In reply to Dinh NguyenQuoted 61 lines · Dinh Nguyen
Quoted 43 lines · Ley Foon Tan
Add base address for Intel Agilex SoC.
Signed-off-by Ley Foon Tan <[email protected]>--- .../include/mach/base_addr_agilex.h | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_agilex.harch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +28
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2016-2017 Intel Corporation <www.intel.com> +*/ + +#ifndef _SOCFPGA_AGILEX_BASE_HARDWARE_H_ +#define _SOCFPGA_AGILEX_BASE_HARDWARE_H_ + +#define SOCFPGA_CCU_ADDRESS 0xf7000000 +#define SOCFPGA_FW_MPU_DDR_SCR_ADDRESS 0xf8020200 +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_MAILBOX_ADDRESS 0xffa30000 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER1_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD1_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD2_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD3_ADDRESS 0xffd00500 +#define SOCFPGA_GTIMER_SEC_ADDRESS 0xffd01000 +#define SOCFPGA_GTIMER_NSEC_ADDRESS 0xffd02000 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_FIREWALL_L4_PER 0xffd21000 +#define SOCFPGA_FIREWALL_L4_SYS 0xffd21100arch/arm/mach-socfpga/include/mach/base_addr_agilex.h line 38
Quoted 10 lines
arch/arm/mach-socfpga/include/mach/base_addr_agilex.h new file +10
-0+#define SOCFPGA_FIREWALL_SOC2FPGA 0xffd21200 +#define SOCFPGA_FIREWALL_LWSOC2FPGA 0xffd21300 +#define SOCFPGA_FIREWALL_TCU 0xffd21400 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000 +#define GICD_BASE 0xfffc1000 +#define GICC_BASE 0xfffc2000 + +#endif /* _SOCFPGA_AGILEX_BASE_HARDWARE_H_ */ All of these addresses are identical to the Stratix10, couldn't you just use the Stratix10 and any diffs, you can just use fdt?
Quoted 1 line
Dinh
There is one different compare to S10.
Can reuse base_address_s10.h file, but filename remain _s10.h.
Regards
Ley Foon
PATCH 2/14 arm: socfpga: Move firewall code to firewall file
In reply to Ley Foon TanMove firewall related code new firewall.c in order to share code in Stratix 10 and Agilex.
No functional change.
---
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/firewall.c | 97 +++++++++++++++++++
.../mach/{firewall_s10.h => firewall.h} | 10 +-
arch/arm/mach-socfpga/spl_s10.c | 84 +---------------
drivers/ddr/altera/sdram_s10.c | 2 +-
5 files changed, 107 insertions(+), 87 deletions(-)
create mode 100644 arch/arm/mach-socfpga/firewall.c
rename arch/arm/mach-socfpga/include/mach/{firewall_s10.h => firewall.h} (94%)arch/arm/mach-socfpga/Makefile +1 -0
@@ -52,6 +52,7 @@ ifdef CONFIG_TARGET_SOCFPGA_ARRIA10 obj-y += spl_a10.o endif ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 +obj-y += firewall.o obj-y += spl_s10.o endif endif
arch/arm/mach-socfpga/firewall.c new file +97 -0
97 lines not on this page · raw message
arch/arm/mach-socfpga/include/mach/firewall.h renamed from arch/arm/mach-socfpga/include/mach/firewall_s10.h +6 -4
@@ -1,11 +1,11 @@/* SPDX-License-Identifier: GPL-2.0 * -* Copyright (C) 2017-2018 Intel Corporation <www.intel.com> +* Copyright (C) 2017-2019 Intel Corporation <www.intel.com> * */ -#ifndef _FIREWALL_S10_ -#define _FIREWALL_S10_ +#ifndef _FIREWALL_H_ +#define _FIREWALL_H_ struct socfpga_firwall_l4_per { u32 nand; /* 0x00 */
@@ -117,4 +117,6 @@ struct socfpga_firwall_l4_sys {#define FW_MPU_DDR_SCR_WRITEL (data, reg) \ writel(data, SOCFPGA_FW_MPU_DDR_SCR_ADDRESS + (reg)) -#endif /* _FIREWALL_S10_ */ +void firewall_setup (void ); + +#endif /* _FIREWALL_H_ */
arch/arm/mach-socfpga/spl_s10.c +2 -82
102 lines not on this page · raw message
drivers/ddr/altera/sdram_s10.c +1 -1
@@ -13,7 +13,7 @@#include <reset.h> #include "sdram_s10.h" #include <wait_bit.h> -#include <asm/arch/firewall_s10.h> +#include <asm/arch/firewall.h> #include <asm/arch/system_manager.h> #include <asm/arch/reset_manager.h> #include <asm/io.h>
Signature · 1 line
2.19.0
PATCH 3/14 arm: socfpga: Move Stratix10 and Agilex reset manager common code
In reply to Ley Foon TanMove Stratix10 and Agilex reset manager common code to reset.h.
Remove unused RSTMGR_XXX defines.
--- .../mach-socfpga/include/mach/reset_manager.h | 26 ++++++ .../include/mach/reset_manager_s10.h | 80 ------------------- 2 files changed, 26 insertions(+), 80 deletions(-)
arch/arm/mach-socfpga/include/mach/reset_manager.h +26 -0
@@ -36,6 +36,32 @@ void socfpga_per_reset_all(void);/* Create a human-readable reference to SoCFPGA reset. */ #define SOCFPGA_RESET (_name) RSTMGR_##_name +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) + +void reset_deassert_peripherals_handoff (void ); +int cpu_has_been_warmreset (void ); +void socfpga_bridges_reset (int enable); + +#define RSTMGR_MPUMODRST_CORE0 0 +#define RSTMGR_PER0MODRST_OCP_MASK 0x0020bf00 +#define RSTMGR_BRGMODRST_DDRSCH_MASK 0X00000040 +#define RSTMGR_BRGMODRST_FPGA2SOC_MASK 0x00000004 + +/* Watchdogs and MPU warm reset mask */ +#define RSTMGR_L4WD_MPU_WARMRESET_MASK 0x000F0F00 + +/* +* SocFPGA Stratix10 reset IDs, bank mapping is as follows: +* 0 ... mpumodrst +* 1 ... per0modrst +* 2 ... per1modrst +* 3 ... brgmodrst +*/ +#define RSTMGR_L4WD0 RSTMGR_DEFINE(2, 0) +#define RSTMGR_OSC1TIMER0 RSTMGR_DEFINE(2, 4) +#define RSTMGR_UART0 RSTMGR_DEFINE(2, 16) +#endif +#if defined(CONFIG_TARGET_SOCFPGA_GEN5 )#include <asm/arch/reset_manager_gen5.h> #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )
arch/arm/mach-socfpga/include/mach/reset_manager_s10.h +0 -80
90 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
In reply to Ley Foon TanAdd reset manager support for Agilex.
--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 9 +++-- 3 files changed, 48 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_agilex.h
arch/arm/mach-socfpga/include/mach/reset_manager.h +4 -1
@@ -36,7 +36,8 @@ void socfpga_per_reset_all(void);/* Create a human-readable reference to SoCFPGA reset. */ #define SOCFPGA_RESET (_name) RSTMGR_##_name -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )void reset_deassert_peripherals_handoff (void );int cpu_has_been_warmreset (void );
@@ -68,6 +69,8 @@ void socfpga_bridges_reset(int enable);#include <asm/arch/reset_manager_arria10.h> #elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10 )#include <asm/arch/reset_manager_s10.h> +#elif defined(CONFIG_TARGET_SOCFPGA_AGILEX ) +#include <asm/arch/reset_manager_agilex.h> #endif #endif /* _RESET_MANAGER_H_ */
arch/arm/mach-socfpga/include/mach/reset_manager_agilex.h new file +38 -0
@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#ifndef _RESET_MANAGER_AGILEX_ +#define _RESET_MANAGER_AGILEX_ + +struct socfpga_reset_manager { +u32 status; +u32 mpu_rst_stat; +u32 misc_stat; +u32 padding1; +u32 hdsk_en; +u32 hdsk_req; +u32 hdsk_ack; +u32 hdsk_stall; +u32 mpumodrst; +u32 per0modrst; +u32 per1modrst; +u32 brgmodrst; +u32 padding2; +u32 cold_mod_reset; +u32 padding3; +u32 dbg_mod_reset; +u32 padding4; +u32 padding5; +u32 padding6; +u32 brg_warm_mask; +u32 padding7[3 ]; +u32 tst_stat; +u32 padding8; +u32 hdsk_timeout; +u32 mpul2flushtimeout; +u32 dbghdsktimeout; +}; + +#endif /* _RESET_MANAGER_AGILEX_ */
arch/arm/mach-socfpga/reset_manager.c +6 -3
@@ -8,13 +8,15 @@#include <asm/io.h> #include <asm/arch/reset_manager.h> -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )#include <asm/arch/mailbox_s10.h> #endif DECLARE_GLOBAL_DATA_PTR ; -#if !defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if !defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) && \ + !defined(CONFIG_TARGET_SOCFPGA_AGILEX )static const struct socfpga_reset_manager *reset_manager_base = (void *)SOCFPGA_RSTMGR_ADDRESS ;#endif
@@ -25,7 +27,8 @@ static const struct socfpga_reset_manager *reset_manager_base =void reset_cpu (ulong addr) {/* request a warm reset */ -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )puts ("Mailbox: Issuing mailbox cmd REBOOT_HPS\n" );mbox_reset_cold ();#else
Signature · 1 line
2.19.0
Dinh Nguyen
maintainerPATCH 4/14 arm: socfpga: agilex: Add reset manager support
Quoted 6 lines · Ley Foon Tan
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++
AFAIK, there's really nothing different in Agilex reset manager from the Stratix10, can you just re-use the Stratix10?
Dinh
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
Quoted 11 lines · Dinh Nguyen
Quoted 6 lines · Ley Foon Tan
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++
Quoted 4 lines
AFAIK, there's really nothing different in Agilex reset manager from the Stratix10, can you just re-use the Stratix10?
Dinh
There are some changes on the register mapping.
Regards
Ley Foon
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
In reply to Ley Foon TanAm 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 7 lines
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 9 +++--
Have you seen my series that removes reset_manager.c and moves the code to drivers/sysreset instead? It's not accepted, yet, but I think agilex should use drivers/sysreset, too.
Regards,
Simon
Quoted 103 lines
3 files changed, 48 insertions(+), 4 deletions(-)create mode 100644
arch/arm/mach-socfpga/include/mach/reset_manager_agilex.harch/arm/mach-socfpga/include/mach/reset_manager.h +4
-1@@ -36,7 +36,8 @@ void socfpga_per_reset_all(void);/* Create a human-readable reference to SoCFPGA reset. */ #define SOCFPGA_RESET (_name) RSTMGR_##_name -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )void reset_deassert_peripherals_handoff (void );int cpu_has_been_warmreset (void );@@ -68,6 +69,8 @@ void socfpga_bridges_reset(int enable);#include <asm/arch/reset_manager_arria10.h> #elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10 )#include <asm/arch/reset_manager_s10.h> +#elif defined(CONFIG_TARGET_SOCFPGA_AGILEX ) +#include <asm/arch/reset_manager_agilex.h> #endif #endif /* _RESET_MANAGER_H_ */ arch/arm/mach-socfpga/include/mach/reset_manager_agilex.h new file +38
-0@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#ifndef _RESET_MANAGER_AGILEX_ +#define _RESET_MANAGER_AGILEX_ + +struct socfpga_reset_manager { +u32 status; +u32 mpu_rst_stat; +u32 misc_stat; +u32 padding1; +u32 hdsk_en; +u32 hdsk_req; +u32 hdsk_ack; +u32 hdsk_stall; +u32 mpumodrst; +u32 per0modrst; +u32 per1modrst; +u32 brgmodrst; +u32 padding2; +u32 cold_mod_reset; +u32 padding3; +u32 dbg_mod_reset; +u32 padding4; +u32 padding5; +u32 padding6; +u32 brg_warm_mask; +u32 padding7[3 ]; +u32 tst_stat; +u32 padding8; +u32 hdsk_timeout; +u32 mpul2flushtimeout; +u32 dbghdsktimeout; +}; + +#endif /* _RESET_MANAGER_AGILEX_ */ arch/arm/mach-socfpga/reset_manager.c +6
-3@@ -8,13 +8,15 @@#include <asm/io.h> #include <asm/arch/reset_manager.h> -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )#include <asm/arch/mailbox_s10.h> #endif DECLARE_GLOBAL_DATA_PTR ; -#if !defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if !defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) && \ + !defined(CONFIG_TARGET_SOCFPGA_AGILEX )static const struct socfpga_reset_manager *reset_manager_base = (void *)SOCFPGA_RSTMGR_ADDRESS ;#endif @@ -25,7 +27,8 @@ static const struct socfpga_reset_manager *reset_manager_base =void reset_cpu (ulong addr) {/* request a warm reset */ -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX )puts ("Mailbox: Issuing mailbox cmd REBOOT_HPS\n" );mbox_reset_cold ();#else
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
Quoted 10 lines · Simon Goldschmidt
Am 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 7 lines
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 9 +++--
Quoted 6 lines
Have you seen my series that removes
reset_manager.cand moves the code todrivers/sysresetinstead? It's not accepted, yet, but I think agilex should usedrivers/sysreset, too.Regards,
Simon
drivers/sysreset is only for system reset, right?
Most of our drivers use reset framework to reset, but we still using functions from reset_manager to reset watchdog and UART (when CONFIG_DEBUG_UART enabeld).
Regards
Ley Foon
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
Quoted 17 lines · Ley Foon Tan
Quoted 14 lines · Simon Goldschmidt
Am 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 7 lines
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 9 +++--Have you seen my series that removes
reset_manager.cand moves the code todrivers/sysresetinstead? It's not accepted, yet, but I think agilex should usedrivers/sysreset, too.
Quoted 6 lines
Quoted 2 lines
Regards,
Simon
drivers/sysresetis only for system reset, right?
Most of our drivers use reset framework to reset, but we still using functions fromreset_managerto reset watchdog and UART (whenCONFIG_DEBUG_UARTenabeld).
Right, but arch/arm/mach-socfpga/reset_manager.c only contains reset_cpu(), so drivers/sysreset is a direct replacement for this.
You're probably talking about reset_manager_s10.c. I know you still need that (although I'm trying to find a way to move that code to dm driver, too - at least for gen5 as a start).
Regards,
Simon
PATCH 4/14 arm: socfpga: agilex: Add reset manager support
Quoted 26 lines · Simon Goldschmidt
Quoted 17 lines · Ley Foon Tan
Quoted 14 lines · Simon Goldschmidt
Am 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 7 lines
Add reset manager support for Agilex.
Signed-off-by Ley Foon Tan <[email protected]>--- .../mach-socfpga/include/mach/reset_manager.h | 5 ++- .../include/mach/reset_manager_agilex.h | 38 +++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 9 +++--Have you seen my series that removes
reset_manager.cand moves the code todrivers/sysresetinstead? It's not accepted, yet, but I think agilex should usedrivers/sysreset, too.Quoted 6 lines
Quoted 2 lines
Regards,
Simon
drivers/sysresetis only for system reset, right?
Most of our drivers use reset framework to reset, but we still using functions fromreset_managerto reset watchdog and UART (whenCONFIG_DEBUG_UARTenabeld).
Quoted 7 lines
Right, but
arch/arm/mach-socfpga/reset_manager.conly containsreset_cpu(), sodrivers/sysresetis a direct replacement for this.You're probably talking about
reset_manager_s10.c. I know you still need that (although I'm trying to find a way to move that code to dm driver, too - at least for gen5 as a start).
Yes, I am talking about reset_manager_s10.c.
Regards
Ley Foon
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
In reply to Ley Foon TanMove Stratix10 and Agilex system manager common code to system_manager.h.
--- .../include/mach/system_manager.h | 47 +++++++++++++++++++ .../include/mach/system_manager_s10.h | 46 ------------------ 2 files changed, 47 insertions(+), 46 deletions(-)
arch/arm/mach-socfpga/include/mach/system_manager.h +47 -0
@@ -8,6 +8,53 @@#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 )#include <asm/arch/system_manager_s10.h> + +void sysmgr_pinmux_init (void ); +void populate_sysmgr_fpgaintf_module (void ); +void populate_sysmgr_pinmux (void ); +void sysmgr_pinmux_table_sel (const u32 **table,unsigned int *table_len); +void sysmgr_pinmux_table_ctrl (const u32 **table,unsigned int *table_len); +void sysmgr_pinmux_table_fpga (const u32 **table,unsigned int *table_len); +void sysmgr_pinmux_table_delay (const u32 **table,unsigned int *table_len); + +#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX BIT(0) +#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO BIT(1) +#define SYSMGR_ECC_OCRAM_EN BIT(0) +#define SYSMGR_ECC_OCRAM_SERR BIT(3) +#define SYSMGR_ECC_OCRAM_DERR BIT(4) +#define SYSMGR_FPGAINTF_USEFPGA 0x1 + +#define SYSMGR_FPGAINTF_NAND BIT(4) +#define SYSMGR_FPGAINTF_SDMMC BIT(8) +#define SYSMGR_FPGAINTF_SPIM0 BIT(16) +#define SYSMGR_FPGAINTF_SPIM1 BIT(24) +#define SYSMGR_FPGAINTF_EMAC0 BIT(0) +#define SYSMGR_FPGAINTF_EMAC1 BIT(8) +#define SYSMGR_FPGAINTF_EMAC2 BIT(16) + +#define SYSMGR_SDMMC_SMPLSEL_SHIFT 4 +#define SYSMGR_SDMMC_DRVSEL_SHIFT 0 + +/* EMAC Group Bit definitions */ +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2 + +#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0 +#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2 +#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3 + +#define SYSMGR_NOC_H2F_MSK 0x00000001 +#define SYSMGR_NOC_LWH2F_MSK 0x00000010 +#define SYSMGR_HMC_CLK_STATUS_MSK 0x00000001 + +#define SYSMGR_DMA_IRQ_NS 0xFF000000 +#define SYSMGR_DMA_MGR_NS 0x00010000 + +#define SYSMGR_DMAPERIPH_ALL_NS 0xFFFFFFFF + +#define SYSMGR_WDDBG_PAUSE_ALL_CPU 0x0F0F0F0F +#else #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX BIT(0)#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO BIT(1)
arch/arm/mach-socfpga/include/mach/system_manager_s10.h +0 -46
56 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>
This becomes quite a bit of ifdeffery . Why don't you have the system_manager.h include system_manager_$soc.h like e.g. here?
http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
Signature · 2 lines
Best regards, Marek Vasut
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 6 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>
Quoted 8 lines
This becomes quite a bit of ifdeffery . Why don't you have the
system_manager.hinclude system_manager_$soc.h like e.g. here?http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
--
Best regards,
Marek Vasut
We already have similar thing for Gen5. A10 and S10 includes. But, S10 and Agilex share some common defines/functions.
I can move S10 and Agilex common code to a separate file and include in their header file.
Regards
Ley Foon
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 12 lines · Ley Foon Tan
Quoted 11 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>This becomes quite a bit of ifdeffery . Why don't you have the
system_manager.hinclude system_manager_$soc.h like e.g. here?http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
Quoted 7 lines
Quoted 3 lines
--
Best regards,
Marek VasutWe already have similar thing for Gen5. A10 and S10 includes. But, S10 and Agilex share some common defines/functions.
I can move S10 and Agilex common code to a separate file and include in their header file.
I think that'd improve the code .
Signature · 2 lines
Best regards, Marek Vasut
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 17 lines · Marek Vasut
Quoted 15 lines · Ley Foon Tan
Quoted 14 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>This becomes quite a bit of ifdeffery . Why don't you have the
system_manager.hinclude system_manager_$soc.h like e.g. here?http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
--
Best regards,
Marek Vasut
Quoted 7 lines
Quoted 4 lines
We already have similar thing for Gen5. A10 and S10 includes. But, S10 and Agilex share some common defines/functions.
I can move S10 and Agilex common code to a separate file and include in their header file.I think that'd improve the code .
I am plan to use filename system_manager_s10_agilex_common.h, or you have better filename suggestion? :)
Regards
Ley Foon
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 23 lines · Ley Foon Tan
Quoted 22 lines · Marek Vasut
Quoted 19 lines · Ley Foon Tan
Quoted 6 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>Quoted 8 lines
This becomes quite a bit of ifdeffery . Why don't you have the
system_manager.hinclude system_manager_$soc.h like e.g. here?http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
--
Best regards,
Marek VasutWe already have similar thing for Gen5. A10 and S10 includes. But, S10 and Agilex share some common defines/functions.
I can move S10 and Agilex common code to a separate file and include in their header file.
Quoted 4 lines
Quoted 2 lines
I think that'd improve the code .
I am plan to use filename
system_manager_s10_agilex_common.h, or you have better filename suggestion? :)
Whatever looks consistent is fine.
Signature · 2 lines
Best regards, Marek Vasut
PATCH 5/14 arm: socfpga: Move Stratix10 and Agilex system manager common code
Quoted 25 lines · Marek Vasut
Quoted 23 lines · Ley Foon Tan
Quoted 22 lines · Marek Vasut
Quoted 19 lines · Ley Foon Tan
Quoted 6 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Move Stratix10 and Agilex system manager common code to
system_manager.h.Signed-off-by Ley Foon Tan <[email protected]>Quoted 8 lines
This becomes quite a bit of ifdeffery . Why don't you have the
system_manager.hinclude system_manager_$soc.h like e.g. here?http://git.denx.de/?p=u-boot.git;a=blob;f=arch/arm/mach-rmobile/include/mach/rmobile.h
--
Best regards,
Marek VasutWe already have similar thing for Gen5. A10 and S10 includes. But, S10 and Agilex share some common defines/functions.
I can move S10 and Agilex common code to a separate file and include in their header file.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
I think that'd improve the code .
I am plan to use filename
system_manager_s10_agilex_common.h, or you have better filename suggestion? :)Whatever looks consistent is fine.
--
Noted.
Thanks.
Regards
Ley Foon
PATCH 6/14 arm: socfpga: agilex: Add system manager support
In reply to Ley Foon TanAdd system manager support for Agilex.
--- .../include/mach/system_manager.h | 6 + .../include/mach/system_manager_agilex.h | 127 ++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_agilex.h
arch/arm/mach-socfpga/include/mach/system_manager.h +6 -0
@@ -6,8 +6,14 @@#ifndef _SYSTEM_MANAGER_H_#define _SYSTEM_MANAGER_H_ +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 ) || \ + defined(CONFIG_TARGET_SOCFPGA_AGILEX ) +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10 )#include <asm/arch/system_manager_s10.h> +#elif defined(CONFIG_TARGET_SOCFPGA_AGILEX ) +#include <asm/arch/system_manager_agilex.h> +#endif void sysmgr_pinmux_init (void );void populate_sysmgr_fpgaintf_module (void );
arch/arm/mach-socfpga/include/mach/system_manager_agilex.h new file +127 -0
127 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 7/14 arm: socfpga: agilex: Add clock manager support
In reply to Ley Foon TanAdd clock manager support for Agilex.
--- arch/arm/mach-socfpga/Makefile | 4 + arch/arm/mach-socfpga/clock_manager_agilex.c | 582 ++++++++++++++++++ .../mach-socfpga/include/mach/clock_manager.h | 2 + .../include/mach/clock_manager_agilex.h | 328 ++++++++++ 4 files changed, 916 insertions(+) create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
arch/arm/mach-socfpga/Makefile +4 -0
@@ -40,6 +40,10 @@ obj-y += wrap_pinmux_config_s10.o obj-y += wrap_pll_config_s10.o endif +ifdef CONFIG_TARGET_SOCFPGA_AGILEX +obj-y += clock_manager_agilex.o +endif + ifdef CONFIG_SPL_BUILD ifdef CONFIG_TARGET_SOCFPGA_GEN5 obj-y += spl_gen5.o
arch/arm/mach-socfpga/clock_manager_agilex.c new file +582 -0
582 lines not on this page · raw message
arch/arm/mach-socfpga/include/mach/clock_manager.h +2 -0
@@ -18,6 +18,8 @@ void cm_print_clock_quick_summary(void);#include <asm/arch/clock_manager_arria10.h> #elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10 )#include <asm/arch/clock_manager_s10.h> +#elif defined(CONFIG_TARGET_SOCFPGA_AGILEX ) +#include <asm/arch/clock_manager_agilex.h> #endif #endif /* _CLOCK_MANAGER_H_ */
arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h new file +328 -0
328 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 7/14 arm: socfpga: agilex: Add clock manager support
Quoted 4 lines · Ley Foon Tan
Add clock manager support for Agilex.
Signed-off-by Chee Hong Ang <[email protected]>Signed-off-by Ley Foon Tan <[email protected]>
Quoted 8 lines
--- arch/arm/mach-socfpga/Makefile | 4 + arch/arm/mach-socfpga/clock_manager_agilex.c | 582 ++++++++++++++++++ .../mach-socfpga/include/mach/clock_manager.h | 2 + .../include/mach/clock_manager_agilex.h | 328 ++++++++++ 4 files changed, 916 insertions(+) create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
Can this be in drivers/clk instead ?
Signature · 2 lines
Best regards, Marek Vasut
PATCH 7/14 arm: socfpga: agilex: Add clock manager support
Quoted 15 lines · Marek Vasut
Quoted 4 lines · Ley Foon Tan
Add clock manager support for Agilex.
Signed-off-by Chee Hong Ang <[email protected]>Signed-off-by Ley Foon Tan <[email protected]>Quoted 8 lines
--- arch/arm/mach-socfpga/Makefile | 4 + arch/arm/mach-socfpga/clock_manager_agilex.c | 582 ++++++++++++++++++ .../mach-socfpga/include/mach/clock_manager.h | 2 + .../include/mach/clock_manager_agilex.h | 328 ++++++++++ 4 files changed, 916 insertions(+) create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
Quoted 3 lines
Can this be in
drivers/clkinstead ?--
Yes, it can.
There is plan to move S10 clock driver to DM as well.
Regards
Ley Foon
PATCH 7/14 arm: socfpga: agilex: Add clock manager support
Quoted 17 lines · Ley Foon Tan
Quoted 15 lines · Marek Vasut
Quoted 12 lines · Ley Foon Tan
Add clock manager support for Agilex.
Signed-off-by Chee Hong Ang <[email protected]>Signed-off-by Ley Foon Tan <[email protected]>--- arch/arm/mach-socfpga/Makefile | 4 + arch/arm/mach-socfpga/clock_manager_agilex.c | 582 ++++++++++++++++++ .../mach-socfpga/include/mach/clock_manager.h | 2 + .../include/mach/clock_manager_agilex.h | 328 ++++++++++ 4 files changed, 916 insertions(+) create mode 100644 arch/arm/mach-socfpga/clock_manager_agilex.c create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_agilex.h
Quoted 5 lines
Quoted 3 lines
Can this be in
drivers/clkinstead ?--
Yes, it can.
There is plan to move S10 clock driver to DM as well.
That would indeed be a good plan! I'm working on a clock driver for gen5, currently...
Regards,
Simon
PATCH 8/14 arm: socfpga: agilex: Add CCU support for Agilex
In reply to Ley Foon TanAdd CCU support for Agilex.
--- arch/arm/mach-socfpga/Makefile | 3 + arch/arm/mach-socfpga/ccu_agilex.c | 99 +++++++++++++++++++ .../mach-socfpga/include/mach/ccu_agilex.h | 67 +++++++++++++ 3 files changed, 169 insertions(+) create mode 100644 arch/arm/mach-socfpga/ccu_agilex.c create mode 100644 arch/arm/mach-socfpga/include/mach/ccu_agilex.h
arch/arm/mach-socfpga/Makefile +3 -0
@@ -59,6 +59,9 @@ ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 obj-y += firewall.o obj-y += spl_s10.o endif +ifdef CONFIG_TARGET_SOCFPGA_AGILEX +obj-y += ccu_agilex.o +endif endif ifdef CONFIG_TARGET_SOCFPGA_GEN5
arch/arm/mach-socfpga/ccu_agilex.c new file +99 -0
99 lines not on this page · raw message
arch/arm/mach-socfpga/include/mach/ccu_agilex.h new file +67 -0
67 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 8/14 arm: socfpga: agilex: Add CCU support for Agilex
Am 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 1 line
Add CCU support for Agilex.
This description could be a bit longer: what's CCU, and why do you add it or when/by what will it be used.
Regards,
Simon
Quoted 203 lines
Signed-off-by Ley Foon Tan <[email protected]>--- arch/arm/mach-socfpga/Makefile | 3 + arch/arm/mach-socfpga/ccu_agilex.c | 99 +++++++++++++++++++ .../mach-socfpga/include/mach/ccu_agilex.h | 67 +++++++++++++ 3 files changed, 169 insertions(+)create mode 100644
arch/arm/mach-socfpga/ccu_agilex.ccreate mode 100644arch/arm/mach-socfpga/include/mach/ccu_agilex.harch/arm/mach-socfpga/Makefile +3
-0@@ -59,6 +59,9 @@ ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 obj-y += firewall.o obj-y += spl_s10.o endif +ifdef CONFIG_TARGET_SOCFPGA_AGILEX +obj-y += ccu_agilex.o +endif endif ifdef CONFIG_TARGET_SOCFPGA_GEN5arch/arm/mach-socfpga/ccu_agilex.c new file +99
-0@@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +* +*/ +#include <asm/io.h> +#include <wait_bit.h> +#include <asm/arch/ccu_agilex.h> + +static void ccu_init_dirs (void ) +{ +ulong i, f; +int ret; +u32 num_of_dirs; +u32 num_of_snoop_filters; +u32 reg; + + num_of_dirs =CSUIDR_NUMDIRUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + num_of_snoop_filters = +CSIDR_NUMSFS_GET (readl (CCU_REG_ADDR (CSIDR ))) +1 ; + +/* Initialize each snoop filter in each directory */ +for (f =0 ; f < num_of_snoop_filters; f++) { + reg = f <<DIRUSFMCR_SFID_SHIFT ; +for (i =0 ; i < num_of_dirs; i++) { +/* Initialize all entries */ +writel (reg,CCU_DIR_REG_ADDR (i,DIRUSFMCR )); + +/* Poll snoop filter maintenance operation active +* bit become 0. +*/ + ret =wait_for_bit_le32 ((const void *) +CCU_DIR_REG_ADDR (i,DIRUSFMAR ), +BIT (0 ), false,1000 , false); +if (ret) { +puts ("CCU: Directory initialization failed!\n" ); +hang (); + } + +/* Enable snoop filter, a bit per snoop filter */ +setbits_le32 ((ulong )CCU_DIR_REG_ADDR (i,DIRUSFER ), +BIT (f)); + } + } +} + +void ccu_init_coh_agent_intf (void ) +{ +u32 num_of_coh_agent_intf; +u32 num_of_dirs; +u32 reg; +u32 type; +u32 i, dir; + + num_of_coh_agent_intf = +CSUIDR_NUMCAIUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + num_of_dirs =CSUIDR_NUMDIRUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + +for (i =0 ; i < num_of_coh_agent_intf; i++) { + reg =readl ((ulong )CCU_CAIU_REG_ADDR (i,CAIUIDR )); +if (CAIUIDR_CA_GET (reg)) { +/* Caching agent bit is enabled, enable caching agent +* snoop in each directory +*/ +for (dir =0 ; dir < num_of_dirs; dir++) { +setbits_le32 ((ulong ) +CCU_DIR_REG_ADDR (dir,DIRUCASER0 ), +BIT (i)); + } + } + + type =CAIUIDR_TYPE_GET (reg); +if (type ==CAIUIDR_TYPE_ACE_CAI_DVM_SUPPORT || + type ==CAIUIDR_TYPE_ACELITE_CAI_DVM_SUPPORT ) { +/* DVM support is enabled, enable ACE DVM snoop*/ +setbits_le32 ((ulong)(CCU_REG_ADDR (CSADSER0 )), +BIT (i)); + } + } +} + +static void ocram_bypass_firewall (void ) +{ +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_01_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_02_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_03_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_04_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +} + +void ccu_init (void ) +{ +ccu_init_dirs (); +ccu_init_coh_agent_intf (); +ocram_bypass_firewall (); +}arch/arm/mach-socfpga/include/mach/ccu_agilex.h new file +67
-0@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#ifndef _CCU_AGILEX_H_ +#define _CCU_AGILEX_H_ + +/* Directory */ +#define DIRUSFER 0x80010 +#define DIRUCASER0 0x80040 +#define DIRUMRHER 0x80070 +#define DIRUSFMCR 0x80080 +#define DIRUSFMAR 0x80084 + +#define DIRUSFMCR_SFID_SHIFT 16 + +/* Coherent cache agent interface */ +#define CAIUIDR 0x00ffc + +#define CAIUIDR_CA_GET (v) (((v) & 0x00008000) >> 15) +#define CAIUIDR_TYPE_GET (v) (((v) & 0x000f0000) >> 16) +#define CAIUIDR_TYPE_ACE_CAI_DVM_SUPPORT 0 +#define CAIUIDR_TYPE_ACELITE_CAI_DVM_SUPPORT 1 + +/* Coherent subsystem */ +#define CSADSER0 0xff040 +#define CSUIDR 0xffff8 +#define CSIDR 0xffffc + +#define CSUIDR_NUMCAIUS_GET (v) (((v) & 0x0000007f) >> 0) +#define CSUIDR_NUMDIRUS_GET (v) (((v) & 0x003f0000) >> 16) +#define CSUIDR_NUMCMIUS_GET (v) (((v) & 0x3f000000) >> 24) + +#define CSIDR_NUMSFS_GET (v) (((v) & 0x007c0000) >> 18) + +#define DIR_REG_OFF 0x1000 +#define CAIU_REG_OFF 0x1000 +#define COHMEM_REG_OFF 0x1000 + +#define CCU_REG_ADDR (reg) \ + (SOCFPGA_CCU_ADDRESS + (reg)) + +#define CCU_DIR_REG_ADDR (dir, reg) \ + (CCU_REG_ADDR(reg) + ((dir) * DIR_REG_OFF)) + +#define CCU_CAIU_REG_ADDR (caiu, reg) \ + (CCU_REG_ADDR(reg) + ((caiu) * CAIU_REG_OFF)) + +/* Coherent CPU BYPASS OCRAM */ +#define COH_CPU0_BYPASS_OC_BASE (SOCFPGA_CCU_ADDRESS + 0x100200) + +#define OCRAM_BLK_CGF_01_REG 0x4 +#define OCRAM_BLK_CGF_02_REG 0x8 +#define OCRAM_BLK_CGF_03_REG 0xc +#define OCRAM_BLK_CGF_04_REG 0x10 +#define OCRAM_SECURE_REGIONS 4 + +#define OCRAM_PRIVILEGED_MASK BIT(29) +#define OCRAM_SECURE_MASK BIT(30) + +#define COH_CPU0_BYPASS_REG_ADDR (reg) \ + (COH_CPU0_BYPASS_OC_BASE + (reg)) + +void ccu_init (void ); + +#endif /* _CCU_AGILEX_H_ */
PATCH 8/14 arm: socfpga: agilex: Add CCU support for Agilex
Quoted 6 lines · Simon Goldschmidt
Am 10.05.2019 um 07:54 schrieb Ley Foon Tan:
Quoted 1 line
Add CCU support for Agilex.
This description could be a bit longer: what's CCU, and why do you add it or when/by what will it be used.
Will update description.
Thanks.
Regards
Ley Foon
Quoted 208 lines
Regards,
SimonQuoted 203 lines
Signed-off-by Ley Foon Tan <[email protected]>--- arch/arm/mach-socfpga/Makefile | 3 + arch/arm/mach-socfpga/ccu_agilex.c | 99 +++++++++++++++++++ .../mach-socfpga/include/mach/ccu_agilex.h | 67 +++++++++++++ 3 files changed, 169 insertions(+)create mode 100644
arch/arm/mach-socfpga/ccu_agilex.ccreate mode 100644arch/arm/mach-socfpga/include/mach/ccu_agilex.harch/arm/mach-socfpga/Makefile +3
-0@@ -59,6 +59,9 @@ ifdef CONFIG_TARGET_SOCFPGA_STRATIX10 obj-y += firewall.o obj-y += spl_s10.o endif +ifdef CONFIG_TARGET_SOCFPGA_AGILEX +obj-y += ccu_agilex.o +endif endif ifdef CONFIG_TARGET_SOCFPGA_GEN5arch/arm/mach-socfpga/ccu_agilex.c new file +99
-0@@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +* +*/ +#include <asm/io.h> +#include <wait_bit.h> +#include <asm/arch/ccu_agilex.h> + +static void ccu_init_dirs (void ) +{ +ulong i, f; +int ret; +u32 num_of_dirs; +u32 num_of_snoop_filters; +u32 reg; + + num_of_dirs =CSUIDR_NUMDIRUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + num_of_snoop_filters = +CSIDR_NUMSFS_GET (readl (CCU_REG_ADDR (CSIDR ))) +1 ; + +/* Initialize each snoop filter in each directory */ +for (f =0 ; f < num_of_snoop_filters; f++) { + reg = f <<DIRUSFMCR_SFID_SHIFT ; +for (i =0 ; i < num_of_dirs; i++) { +/* Initialize all entries */ +writel (reg,CCU_DIR_REG_ADDR (i,DIRUSFMCR )); + +/* Poll snoop filter maintenance operation active +* bit become 0. +*/ + ret =wait_for_bit_le32 ((const void *) +CCU_DIR_REG_ADDR (i,DIRUSFMAR ), +BIT (0 ), false,1000 , false); +if (ret) { +puts ("CCU: Directory initialization failed!\n" ); +hang (); + } + +/* Enable snoop filter, a bit per snoop filter */ +setbits_le32 ((ulong )CCU_DIR_REG_ADDR (i,DIRUSFER ), +BIT (f)); + } + } +} + +void ccu_init_coh_agent_intf (void ) +{ +u32 num_of_coh_agent_intf; +u32 num_of_dirs; +u32 reg; +u32 type; +u32 i, dir; + + num_of_coh_agent_intf = +CSUIDR_NUMCAIUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + num_of_dirs =CSUIDR_NUMDIRUS_GET (readl (CCU_REG_ADDR (CSUIDR ))); + +for (i =0 ; i < num_of_coh_agent_intf; i++) { + reg =readl ((ulong )CCU_CAIU_REG_ADDR (i,CAIUIDR )); +if (CAIUIDR_CA_GET (reg)) { +/* Caching agent bit is enabled, enable caching agent +* snoop in each directory +*/ +for (dir =0 ; dir < num_of_dirs; dir++) { +setbits_le32 ((ulong ) +CCU_DIR_REG_ADDR (dir,DIRUCASER0 ), +BIT (i)); + } + } + + type =CAIUIDR_TYPE_GET (reg); +if (type ==CAIUIDR_TYPE_ACE_CAI_DVM_SUPPORT || + type ==CAIUIDR_TYPE_ACELITE_CAI_DVM_SUPPORT ) { +/* DVM support is enabled, enable ACE DVM snoop*/ +setbits_le32 ((ulong)(CCU_REG_ADDR (CSADSER0 )), +BIT (i)); + } + } +} + +static void ocram_bypass_firewall (void ) +{ +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_01_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_02_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_03_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +clrbits_le32 ((ulong)(COH_CPU0_BYPASS_REG_ADDR (OCRAM_BLK_CGF_04_REG )), +OCRAM_PRIVILEGED_MASK |OCRAM_SECURE_MASK ); +} + +void ccu_init (void ) +{ +ccu_init_dirs (); +ccu_init_coh_agent_intf (); +ocram_bypass_firewall (); +}arch/arm/mach-socfpga/include/mach/ccu_agilex.h new file +67
-0@@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +*/ + +#ifndef _CCU_AGILEX_H_ +#define _CCU_AGILEX_H_ + +/* Directory */ +#define DIRUSFER 0x80010 +#define DIRUCASER0 0x80040 +#define DIRUMRHER 0x80070 +#define DIRUSFMCR 0x80080 +#define DIRUSFMAR 0x80084 + +#define DIRUSFMCR_SFID_SHIFT 16 + +/* Coherent cache agent interface */ +#define CAIUIDR 0x00ffc + +#define CAIUIDR_CA_GET (v) (((v) & 0x00008000) >> 15) +#define CAIUIDR_TYPE_GET (v) (((v) & 0x000f0000) >> 16) +#define CAIUIDR_TYPE_ACE_CAI_DVM_SUPPORT 0 +#define CAIUIDR_TYPE_ACELITE_CAI_DVM_SUPPORT 1 + +/* Coherent subsystem */ +#define CSADSER0 0xff040 +#define CSUIDR 0xffff8 +#define CSIDR 0xffffc + +#define CSUIDR_NUMCAIUS_GET (v) (((v) & 0x0000007f) >> 0) +#define CSUIDR_NUMDIRUS_GET (v) (((v) & 0x003f0000) >> 16) +#define CSUIDR_NUMCMIUS_GET (v) (((v) & 0x3f000000) >> 24) + +#define CSIDR_NUMSFS_GET (v) (((v) & 0x007c0000) >> 18) + +#define DIR_REG_OFF 0x1000 +#define CAIU_REG_OFF 0x1000 +#define COHMEM_REG_OFF 0x1000 + +#define CCU_REG_ADDR (reg) \ + (SOCFPGA_CCU_ADDRESS + (reg)) + +#define CCU_DIR_REG_ADDR (dir, reg) \ + (CCU_REG_ADDR(reg) + ((dir) * DIR_REG_OFF)) + +#define CCU_CAIU_REG_ADDR (caiu, reg) \ + (CCU_REG_ADDR(reg) + ((caiu) * CAIU_REG_OFF)) + +/* Coherent CPU BYPASS OCRAM */ +#define COH_CPU0_BYPASS_OC_BASE (SOCFPGA_CCU_ADDRESS + 0x100200) + +#define OCRAM_BLK_CGF_01_REG 0x4 +#define OCRAM_BLK_CGF_02_REG 0x8 +#define OCRAM_BLK_CGF_03_REG 0xc +#define OCRAM_BLK_CGF_04_REG 0x10 +#define OCRAM_SECURE_REGIONS 4 + +#define OCRAM_PRIVILEGED_MASK BIT(29) +#define OCRAM_SECURE_MASK BIT(30) + +#define COH_CPU0_BYPASS_REG_ADDR (reg) \ + (COH_CPU0_BYPASS_OC_BASE + (reg)) + +void ccu_init (void ); + +#endif /* _CCU_AGILEX_H_ */
PATCH 9/14 ddr: altera: Restructure Stratix 10 SDRAM driver
In reply to Ley Foon TanRestructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex.
---
drivers/ddr/altera/Makefile | 2 +-
drivers/ddr/altera/sdram_common.c | 307 ++++++++++++++++++
.../altera/{sdram_s10.h => sdram_common.h} | 74 +++--
drivers/ddr/altera/sdram_s10.c | 300 +----------------
drivers/ddr/altera/sdram_s10.h | 148 ---------
5 files changed, 348 insertions(+), 483 deletions(-)
create mode 100644 drivers/ddr/altera/sdram_common.c
copy drivers/ddr/altera/{sdram_s10.h => sdram_common.h} (79%)drivers/ddr/altera/Makefile +1 -1
@@ -9,5 +9,5 @@ ifdef CONFIG_$(SPL_)ALTERA_SDRAM obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o -obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_s10.o +obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_common.o sdram_s10.o endif
drivers/ddr/altera/sdram_common.c new file +307 -0
307 lines not on this page · raw message
drivers/ddr/altera/sdram_common.h renamed from drivers/ddr/altera/sdram_s10.h +38 -36
89 lines not on this page · raw message
drivers/ddr/altera/sdram_s10.c +2 -298
336 lines not on this page · raw message
drivers/ddr/altera/sdram_s10.h +0 -148
158 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 10/14 ddr: altera: agilex: Add SDRAM driver for Agilex
In reply to Ley Foon TanAdd SDRAM driver for Agilex SoC.
--- drivers/ddr/altera/Kconfig | 6 +- drivers/ddr/altera/Makefile | 1 + drivers/ddr/altera/sdram_agilex.c | 158 ++++++++++++++++++++++++++++++ drivers/ddr/altera/sdram_common.c | 1 + drivers/ddr/altera/sdram_common.h | 1 + 5 files changed, 164 insertions(+), 3 deletions(-) create mode 100644 drivers/ddr/altera/sdram_agilex.c
drivers/ddr/altera/Kconfig +3 -3
@@ -1,8 +1,8 @@ config SPL_ALTERA_SDRAM bool "SoCFPGA DDR SDRAM driver in SPL" depends on SPL - depends on TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 || TARGET_SOCFPGA_STRATIX10 - select RAM if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_STRATIX10 - select SPL_RAM if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_STRATIX10 + depends on TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 || TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX + select RAM if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX + select SPL_RAM if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX help Enable DDR SDRAM controller for the SoCFPGA devices.
drivers/ddr/altera/Makefile +1 -0
@@ -10,4 +10,5 @@ ifdef CONFIG_$(SPL_)ALTERA_SDRAM obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_common.o sdram_s10.o +obj-$(CONFIG_TARGET_SOCFPGA_AGILEX) += sdram_common.o sdram_agilex.o endif
drivers/ddr/altera/sdram_agilex.c new file +158 -0
158 lines not on this page · raw message
drivers/ddr/altera/sdram_common.c +1 -0
@@ -292,6 +292,7 @@ static struct ram_ops altera_sdram_ops = {static const struct udevice_id altera_sdram_ids[] = { { .compatible ="altr,sdr-ctl-s10" }, + { .compatible ="altr,sdr-ctl-agilex" }, {/* sentinel */ } };
drivers/ddr/altera/sdram_common.h +1 -0
@@ -69,6 +69,7 @@ struct altera_sdram_platdata {/* HMC MMR IO48 registers */ #define CTRLCFG0 0x28#define CTRLCFG1 0x2c +#define CTRLCFG3 0x34#define DRAMTIMING0 0x50#define CALTIMING0 0x7c#define CALTIMING1 0x80
Signature · 1 line
2.19.0
PATCH 10/14 ddr: altera: agilex: Add SDRAM driver for Agilex
Quoted 12 lines · Ley Foon Tan
Add SDRAM driver for Agilex SoC.
Signed-off-by Tien Fong Chee <[email protected]>Signed-off-by Ley Foon Tan <[email protected]>--- drivers/ddr/altera/Kconfig | 6 +- drivers/ddr/altera/Makefile | 1 + drivers/ddr/altera/sdram_agilex.c | 158 ++++++++++++++++++++++++++++++ drivers/ddr/altera/sdram_common.c | 1 + drivers/ddr/altera/sdram_common.h | 1 + 5 files changed, 164 insertions(+), 3 deletions(-) create mode 100644 drivers/ddr/altera/sdram_agilex.c
[...]
drivers/ddr/altera/sdram_agilex.c line 109
Quoted 5 lines
drivers/ddr/altera/sdram_agilex.c new file +5
-0+/* This enables nonsecure access to DDR */ +/* mpuregion0addr_limit */ +FW_MPU_DDR_SCR_WRITEL (gd->ram_size -1 , +FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT ); +FW_MPU_DDR_SCR_WRITEL (0x1F ,FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT );
Why is the function name in caps?
drivers/ddr/altera/sdram_agilex.c line 119
Quoted 10 lines
drivers/ddr/altera/sdram_agilex.c new file +10
-0+ +/* nonmpuregion0addr_limit */ +FW_MPU_DDR_SCR_WRITEL (gd->ram_size -1 , +FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT ); + +/* Enable mpuregion0enable and nonmpuregion0enable */ +FW_MPU_DDR_SCR_WRITEL (MPUREGION0_ENABLE |NONMPUREGION0_ENABLE , +FW_MPU_DDR_SCR_EN_SET ); + +u32 ctrlcfg1 =hmc_readl (plat,CTRLCFG1 );
Doesn't the C compiler warn about variable defined in the middle of code ?
[...]
Signature · 2 lines
Best regards, Marek Vasut
PATCH 10/14 ddr: altera: agilex: Add SDRAM driver for Agilex
Quoted 17 lines · Marek Vasut
Quoted 12 lines · Ley Foon Tan
Add SDRAM driver for Agilex SoC.
Signed-off-by Tien Fong Chee <[email protected]>Signed-off-by Ley Foon Tan <[email protected]>--- drivers/ddr/altera/Kconfig | 6 +- drivers/ddr/altera/Makefile | 1 + drivers/ddr/altera/sdram_agilex.c | 158 ++++++++++++++++++++++++++++++ drivers/ddr/altera/sdram_common.c | 1 + drivers/ddr/altera/sdram_common.h | 1 + 5 files changed, 164 insertions(+), 3 deletions(-) create mode 100644 drivers/ddr/altera/sdram_agilex.c[...]
Quoted 7 lines
drivers/ddr/altera/sdram_agilex.c line 109
Quoted 5 lines
drivers/ddr/altera/sdram_agilex.c new file +5
-0+/* This enables nonsecure access to DDR */ +/* mpuregion0addr_limit */ +FW_MPU_DDR_SCR_WRITEL (gd->ram_size -1 , +FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT ); +FW_MPU_DDR_SCR_WRITEL (0x1F ,FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT );Why is the function name in caps?
They are macros, not function.
Quoted 13 lines
drivers/ddr/altera/sdram_agilex.c line 119
Quoted 11 lines
drivers/ddr/altera/sdram_agilex.c new file +10
-0+ +/* nonmpuregion0addr_limit */ +FW_MPU_DDR_SCR_WRITEL (gd->ram_size -1 , +FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT ); + +/* Enable mpuregion0enable and nonmpuregion0enable */ +FW_MPU_DDR_SCR_WRITEL (MPUREGION0_ENABLE |NONMPUREGION0_ENABLE , +FW_MPU_DDR_SCR_EN_SET ); + +u32 ctrlcfg1 =hmc_readl (plat,CTRLCFG1 );Doesn't the C compiler warn about variable defined in the middle of code ?
No compiler warning.
Regards
Ley Foon
PATCH 11/14 board: intel: agilex: Add socdk board support for Intel Agilex SoC
In reply to Ley Foon TanAdd socdk board support for Intel Agilex SoC
--- board/intel/agilex-socdk/MAINTAINERS | 7 +++++++ board/intel/agilex-socdk/Makefile | 7 +++++++ board/intel/agilex-socdk/socfpga.c | 7 +++++++ 3 files changed, 21 insertions(+) create mode 100644 board/intel/agilex-socdk/MAINTAINERS create mode 100644 board/intel/agilex-socdk/Makefile create mode 100644 board/intel/agilex-socdk/socfpga.c
board/intel/agilex-socdk/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SOCFPGA BOARD +M: Ley Foon Tan <[email protected]> +M: Chee Hong Ang <[email protected]> +S: Maintained +F: board/intel/agilex-socdk/ +F: include/configs/socfpga_agilex_socdk.h +F: configs/socfpga_agilex_defconfig
board/intel/agilex-socdk/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# +# Copyright (C) 2019 Intel Corporation <www.intel.com> +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := socfpga.o
board/intel/agilex-socdk/socfpga.c new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (C) 2019 Intel Corporation <www.intel.com> +* +*/ + +#include <common.h>
Signature · 1 line
2.19.0
PATCH 12/14 arm: socfpga: agilex: Add SPL for Agilex SoC
In reply to Ley Foon TanAdd SPL support for Agilex SoC.
--- arch/arm/mach-socfpga/Makefile | 1 + arch/arm/mach-socfpga/spl_agilex.c | 105 +++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+) create mode 100644 arch/arm/mach-socfpga/spl_agilex.c
arch/arm/mach-socfpga/Makefile +1 -0
@@ -61,6 +61,7 @@ obj-y += spl_s10.o endif ifdef CONFIG_TARGET_SOCFPGA_AGILEX obj-y += ccu_agilex.o +obj-y += spl_agilex.o endif endif
arch/arm/mach-socfpga/spl_agilex.c new file +105 -0
105 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 13/14 arm: dts: agilex: Add base dtsi and devkit dts
In reply to Ley Foon TanAdd device tree files for Agilex SoC platform.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_agilex.dtsi | 459 ++++++++++++++++++ arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi | 59 +++ arch/arm/dts/socfpga_agilex_socdk.dts | 131 +++++ 4 files changed, 650 insertions(+) create mode 100644 arch/arm/dts/socfpga_agilex.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_agilex_socdk.dts
arch/arm/dts/Makefile +1 -0
@@ -274,6 +274,7 @@ dtb-$(CONFIG_TI816X) += dm8168-evm.dtb dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ + socfpga_agilex_socdk.dtb \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_is1.dtb \
arch/arm/dts/socfpga_agilex.dtsi new file +459 -0
459 lines not on this page · raw message
arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi new file +59 -0
59 lines not on this page · raw message
arch/arm/dts/socfpga_agilex_socdk.dts new file +131 -0
131 lines not on this page · raw message
Signature · 1 line
2.19.0
PATCH 13/14 arm: dts: agilex: Add base dtsi and devkit dts
Quoted 3 lines · Ley Foon Tan
Add device tree files for Agilex SoC platform.
Signed-off-by Ley Foon Tan <[email protected]>
Are these from Linux ? If so, which version and commit ?
Signature · 2 lines
Best regards, Marek Vasut
PATCH 13/14 arm: dts: agilex: Add base dtsi and devkit dts
Quoted 9 lines · Marek Vasut
Quoted 3 lines · Ley Foon Tan
Add device tree files for Agilex SoC platform.
Signed-off-by Ley Foon Tan <[email protected]>Are these from Linux ? If so, which version and commit ?
--
Yes, but with minor changes.
It is from linux-next branch. Will add commit id.
Regards
Ley Foon
Regards
Ley Foon
PATCH 14/14 arm: socfpga: agilex: Enable Agilex SoC build
In reply to Ley Foon TanAdd build support for Agilex SoC.
--- arch/arm/Kconfig | 4 +- arch/arm/mach-socfpga/Kconfig | 13 ++ arch/arm/mach-socfpga/Makefile | 9 + configs/socfpga_agilex_defconfig | 57 +++++++ include/configs/socfpga_agilex_socdk.h | 220 +++++++++++++++++++++++++ 5 files changed, 301 insertions(+), 2 deletions(-) create mode 100644 configs/socfpga_agilex_defconfig create mode 100644 include/configs/socfpga_agilex_socdk.h
arch/arm/Kconfig +2 -2
@@ -815,7 +815,7 @@ config ARCH_SOCFPGA bool "Altera SOCFPGA family" select ARCH_EARLY_INIT_R select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 - select ARM64 if TARGET_SOCFPGA_STRATIX10 + select ARM64 if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 select DM select DM_SERIAL
@@ -827,7 +827,7 @@ config ARCH_SOCFPGA select SPL_LIBGENERIC_SUPPORT select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL - select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 + select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX select SPL_SERIAL_SUPPORT select SPL_WATCHDOG_SUPPORT select SUPPORT_SPL
arch/arm/mach-socfpga/Kconfig +13 -0
@@ -20,6 +20,12 @@ config SYS_TEXT_BASE default 0x01000040 if TARGET_SOCFPGA_ARRIA10 default 0x01000040 if TARGET_SOCFPGA_GEN5 +config TARGET_SOCFPGA_AGILEX + bool + select ARMV8_MULTIENTRY + select ARMV8_SET_SMPEN + select ARMV8_SPIN_TABLE + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
@@ -64,6 +70,10 @@ choice prompt "Altera SOCFPGA board select" optional +config TARGET_SOCFPGA_AGILEX_SOCDK + bool "Intel SOCFPGA SoCDK (Agilex)" + select TARGET_SOCFPGA_AGILEX + config TARGET_SOCFPGA_ARRIA10_SOCDK bool "Altera SOCFPGA SoCDK (Arria 10)" select TARGET_SOCFPGA_ARRIA10
@@ -120,6 +130,7 @@ config TARGET_SOCFPGA_TERASIC_SOCKIT endchoice config SYS_BOARD + default "agilex-socdk" if TARGET_SOCFPGA_AGILEX_SOCDK default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
@@ -135,6 +146,7 @@ config SYS_BOARD default "vining_fpga" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA config SYS_VENDOR + default "intel" if TARGET_SOCFPGA_AGILEX_SOCDK default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
@@ -151,6 +163,7 @@ config SYS_SOC default "socfpga" config SYS_CONFIG_NAME + default "socfpga_agilex_socdk" if TARGET_SOCFPGA_AGILEX_SOCDK default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
arch/arm/mach-socfpga/Makefile +9 -0
@@ -42,6 +42,14 @@ endif ifdef CONFIG_TARGET_SOCFPGA_AGILEX obj-y += clock_manager_agilex.o +obj-y += mailbox_s10.o +obj-y += misc_s10.o +obj-y += mmu-arm64_s10.o +obj-y += reset_manager_s10.o +obj-y += system_manager_s10.o +obj-y += timer_s10.o +obj-y += wrap_pinmux_config_s10.o +obj-y += wrap_pll_config_s10.o endif ifdef CONFIG_SPL_BUILD
@@ -61,6 +69,7 @@ obj-y += spl_s10.o endif ifdef CONFIG_TARGET_SOCFPGA_AGILEX obj-y += ccu_agilex.o +obj-y += firewall.o obj-y += spl_agilex.o endif endif
configs/socfpga_agilex_defconfig new file +57 -0
57 lines not on this page · raw message
include/configs/socfpga_agilex_socdk.h new file +220 -0
220 lines not on this page · raw message
Signature · 1 line
2.19.0