Skip to contentSkip to conversation

tty/serial: atmel: Use uart_console() helper

PATCH In review Andy Shevchenko 2 participants 2 messages Mar 10, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tty/serial: atmel: Use uart_console() helper

Use uart_console() helper in instead of open coded variant.

Note, SERIAL_CORE_CONSOLE is selected by SERIAL_ATMEL_CONSOLE, thus no functional changes expected.

---
 drivers/tty/serial/atmel_serial.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
drivers/tty/serial/atmel_serial.c +5 -15
index 187987a5b707..53b1d135f53b 100644
@@ -2640,18 +2640,8 @@ static struct console atmel_console = {
 
 #define ATMEL_CONSOLE_DEVICE	(&atmel_console)
 
-static inline bool atmel_is_console_port(struct uart_port *port)
-{
-	return port->cons && port->cons->index == port->line;
-}
-
 #else
 #define ATMEL_CONSOLE_DEVICE	NULL
-
-static inline bool atmel_is_console_port(struct uart_port *port)
-{
-	return false;
-}
 #endif
 
 static struct uart_driver atmel_uart = {
@@ -2680,14 +2670,14 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_is_console_port(port) && console_suspend_enabled) {
+	if (uart_console(port) && console_suspend_enabled) {
 		/* Drain the TX shifter */
 		while (!(atmel_uart_readl(port, ATMEL_US_CSR) &
 			 ATMEL_US_TXEMPTY))
 			cpu_relax();
 	}
 
-	if (atmel_is_console_port(port) && !console_suspend_enabled) {
+	if (uart_console(port) && !console_suspend_enabled) {
 		/* Cache register values as we won't get a full shutdown/startup
 		 * cycle
 		 */
@@ -2723,7 +2713,7 @@ static int atmel_serial_resume(struct platform_device *pdev)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned long flags;
 
-	if (atmel_is_console_port(port) && !console_suspend_enabled) {
+	if (uart_console(port) && !console_suspend_enabled) {
 		atmel_uart_writel(port, ATMEL_US_MR, atmel_port->cache.mr);
 		atmel_uart_writel(port, ATMEL_US_IER, atmel_port->cache.imr);
 		atmel_uart_writel(port, ATMEL_US_BRGR, atmel_port->cache.brgr);
@@ -2877,7 +2867,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 		goto err_add_port;
 
 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
-	if (atmel_is_console_port(&atmel_port->uart)
+	if (uart_console(&atmel_port->uart)
 			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
 		/*
 		 * The serial core enabled the clock for us, so undo
@@ -2920,7 +2910,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	kfree(atmel_port->rx_ring.buf);
 	atmel_port->rx_ring.buf = NULL;
 err_alloc_ring:
-	if (!atmel_is_console_port(&atmel_port->uart)) {
+	if (!uart_console(&atmel_port->uart)) {
 		clk_put(atmel_port->clk);
 		atmel_port->clk = NULL;
 	}
Signature · 1 line
2.25.1
Acked-by on v1 1/1
#1 lore raw

Le 10/03/2020 à 14:30, Andy Shevchenko a écrit :

Quoted 6 lines

Use uart_console() helper in instead of open coded variant.

Note, SERIAL_CORE_CONSOLE is selected by SERIAL_ATMEL_CONSOLE, thus no functional changes expected.

Quoted 64 lines
---
 drivers/tty/serial/atmel_serial.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
drivers/tty/serial/atmel_serial.c +4 -14
index 187987a5b707..53b1d135f53b 100644
@@ -2640,18 +2640,8 @@ static struct console atmel_console = {
 
 #define ATMEL_CONSOLE_DEVICE	(&atmel_console)
 
-static inline bool atmel_is_console_port(struct uart_port *port)
-{
-	return port->cons && port->cons->index == port->line;
-}
-
 #else
 #define ATMEL_CONSOLE_DEVICE	NULL
-
-static inline bool atmel_is_console_port(struct uart_port *port)
-{
-	return false;
-}
 #endif
 
 static struct uart_driver atmel_uart = {
@@ -2680,14 +2670,14 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_is_console_port(port) && console_suspend_enabled) {
+	if (uart_console(port) && console_suspend_enabled) {
 		/* Drain the TX shifter */
 		while (!(atmel_uart_readl(port, ATMEL_US_CSR) &
 			 ATMEL_US_TXEMPTY))
 			cpu_relax();
 	}
 
-	if (atmel_is_console_port(port) && !console_suspend_enabled) {
+	if (uart_console(port) && !console_suspend_enabled) {
 		/* Cache register values as we won't get a full shutdown/startup
 		 * cycle
 		 */
@@ -2723,7 +2713,7 @@ static int atmel_serial_resume(struct platform_device *pdev)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	unsigned long flags;
 
-	if (atmel_is_console_port(port) && !console_suspend_enabled) {
+	if (uart_console(port) && !console_suspend_enabled) {
 		atmel_uart_writel(port, ATMEL_US_MR, atmel_port->cache.mr);
 		atmel_uart_writel(port, ATMEL_US_IER, atmel_port->cache.imr);
 		atmel_uart_writel(port, ATMEL_US_BRGR, atmel_port->cache.brgr);
@@ -2877,7 +2867,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 		goto err_add_port;
 
 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
-	if (atmel_is_console_port(&atmel_port->uart)
+	if (uart_console(&atmel_port->uart)
 			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
 		/*
 		 * The serial core enabled the clock for us, so undo

drivers/tty/serial/atmel_serial.c static int atmel_serial_probe(struct platform_device *pdev) · line 2916

Quoted 8 lines
drivers/tty/serial/atmel_serial.c +1 -1
@@ -2920,7 +2910,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	kfree(atmel_port->rx_ring.buf);
 	atmel_port->rx_ring.buf = NULL;
 err_alloc_ring:
-	if (!atmel_is_console_port(&atmel_port->uart)) {
+	if (!uart_console(&atmel_port->uart)) {
 		clk_put(atmel_port->clk);
 		atmel_port->clk = NULL;
 	}

Thanks !