Skip to contentSkip to conversation

regulator: fixed, gpio: probe fails on unset regulator-name

bug Harald Geyer 2 participants 2 messages Mar 3, 2017 – Mar 6, 2017

lore
Share & tools
lore
#0 lore raw

Hi!

Documentation/devicetree/bindings/regulator/regulator.txt says that the regulator-name property is optional. However fixed and gpio regulators fail in probe with the following message, if the property is not present:

| reg-fixed-voltage regulators:sensor_supply: Failed to allocate supply name | reg-fixed-voltage: probe of regulators:sensor_supply failed with error -12

This is caused by the following code in both drivers:

        drvdata->desc.name = devm_kstrdup(&pdev->dev,
                                          config->supply_name,
                                          GFP_KERNEL);
        if (drvdata->desc.name == NULL) {
                dev_err(&pdev->dev, "Failed to allocate supply 
name\n");
                return -ENOMEM;
        }

If config->supply_name == NULL, then devm_kstrdup() also returns NULL.

I don't know whether the binding document or the implementation is wrong, so can't propose a fix for this. Sorry.

TIA,
Harald

Signature · 4 lines
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
or CLAM xASPBtezLNqj4cUe8MT5nZjthRSEjrRQXN
#1 lore raw
Quoted 2 lines · Harald Geyer

I don't know whether the binding document or the implementation is wrong, so can't propose a fix for this. Sorry.

The documentation for the fixed and GPIO regulators needs to be updated, it the property is optional for general regulators but required for them.