Introduce per-task latency_nice for scheduler hints
v5 cover Introduce per-task latency_nice for scheduler hints
This is the 5th revision of the patch set to introduce latency_nice as a per task attribute.
The previous version can be found at:
v1: https://lkml.org/lkml/2019/11/25/151
v2: https://lkml.org/lkml/2019/12/8/10
v3: https://lkml.org/lkml/2020/1/16/319
v4: https://lkml.org/lkml/2020/2/24/216
Changes in this revision are:v4->v5:
- Added debugging prints in /proc/<pid>/sched for latency_nice ( based on suggestion from Pavan Kondeti )
- Initialized init_task with latency_nice = 0
- Collected review tag and added few minor fixes.v3->v4:
- Based on Chris's comment, added security check to refrain non-root user set lower value than the current latency_nice values.
v2 -> v3:
- This series changes the longer attribute name to "latency_nice" as per the comment from Dietmar Eggemann https://lkml.org/lkml/2019/12/5/394
v1 -> v2:
- Addressed comments from Qais Yousef
- As per suggestion from Dietmar, moved content from newly created include/linux/sched/latency_tolerance.h to kernel/sched/sched.h
- Extend sched_setattr() to support latency_tolerance in tools headers UAPI
Introduction:
==============
This patch series introduces a new per-task attribute latency_nice to provide the scheduler hints about the latency requirements of the task [1].
Latency_nice is a ranged attribute of a task with the value ranging from [-20, 19] both inclusive which makes it align with the task nice value.
The value should provide scheduler hints about the relative latency requirements of tasks, meaning the task with "latency_nice = -20" should have lower latency requirements than compared to those tasks with higher values. Similarly a task with "latency_nice = 19" can have higher latency and hence such tasks may not care much about latency.
The default value is set to 0. The usecases discussed below can use this range of [-20, 19] for latency_nice for the specific purpose. This patch does not implement any use cases for such attribute so that any change in naming or range does not affect much to the other (future) patches using this. The actual use of latency_nice during task wakeup and load-balancing is yet to be coded for each of those usecases.
As per my view, this defined attribute can be used in following ways for a some of the usecases:
1 Reduce search scan time for select_idle_cpu():
- Reduce search scans for finding idle CPU for a waking task with lower latency_nice values.
2 TurboSched:
- Classify the tasks with higher latency_nice values as a small background task given that its historic utilization is very low, for which the scheduler can search for more number of cores to do task packing. A task with a latency_nice >= some_threshold (e.g, == 19) and util <= 12.5% can be background tasks.
3 Optimize AVX512 based workload:
- Bias scheduler to not put a task having (latency_nice == -20) on a core occupying AVX512 based workload.
Series Organization:
====================
- Patch 1-3: Add support for latency_nice attr in the task struct using sched_{set,get}attr syscall
- Patch 4 : Add permission checks for setting the value.
The patch series can be applied on tip/sched/core at the
commit a0f03b617c3b ("sched/numa: Stop an exhastive search if a reasonable swap candidate or idle CPU is found")
References:
============
[1]. Usecases for the per-task latency-nice attribute,
https://lkml.org/lkml/2019/9/30/215 [2]. Task Latency-nice, "Subhra Mazumdar", https://lkml.org/lkml/2019/8/30/829 [3]. Introduce per-task latency_tolerance for scheduler hints, https://lkml.org/lkml/2019/12/8/10
Parth Shah (4):
sched: Introduce latency-nice as a per-task attribute sched/core: Propagate parent task's latency requirements to the child
task
sched: Allow sched_{get,set}attr to change latency_nice of the task sched/core: Add permission checks for setting the latency_nice value
include/linux/sched.h | 1 + include/uapi/linux/sched.h | 4 +++- include/uapi/linux/sched/types.h | 19 +++++++++++++++++++ init/init_task.c | 1 + kernel/sched/core.c | 26 ++++++++++++++++++++++++++ kernel/sched/debug.c | 1 + kernel/sched/sched.h | 18 ++++++++++++++++++ tools/include/uapi/linux/sched.h | 4 +++- 8 files changed, 72 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.2
PATCH v5 1/4 sched: Introduce latency-nice as a per-task attribute
Latency-nice indicates the latency requirements of a task with respect to the other tasks in the system. The value of the attribute can be within the range of [-20, 19] both inclusive to be in-line with the values just like task nice values.
latency_nice = -20 indicates the task to have the least latency as compared to the tasks having latency_nice = +19.
The latency_nice may affect only the CFS SCHED_CLASS by getting latency requirements from the userspace.
Additionally, add debugging bits for newly added latency_nice attribute.
--- include/linux/sched.h | 1 + kernel/sched/debug.c | 1 + kernel/sched/sched.h | 18 ++++++++++++++++++ 3 files changed, 20 insertions(+)
include/linux/sched.h +1 -0
@@ -679,6 +679,7 @@ struct task_struct {int static_prio;int normal_prio;unsigned int rt_priority; +int latency_nice;const struct sched_class *sched_class;struct sched_entity se;
kernel/sched/debug.c +1 -0
@@ -958,6 +958,7 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,#endif P (policy);P (prio); +P (latency_nice);if (task_has_dl_policy (p)) {P (dl.runtime);P (dl.deadline);
kernel/sched/sched.h +18 -0
@@ -101,6 +101,24 @@ extern long calc_load_fold_active(struct rq *this_rq, long adjust);*/ #define NS_TO_JIFFIES (TIME ) ((unsigned long)(TIME) / (NSEC_PER_SEC / HZ)) +/* +* Latency nice is meant to provide scheduler hints about the relative +* latency requirements of a task with respect to other tasks. +* Thus a task with latency_nice == 19 can be hinted as the task with no +* latency requirements, in contrast to the task with latency_nice == -20 +* which should be given priority in terms of lower latency. +*/ +#define MAX_LATENCY_NICE 19 +#define MIN_LATENCY_NICE -20 + +#define LATENCY_NICE_WIDTH \ + (MAX_LATENCY_NICE - MIN_LATENCY_NICE + 1) + +/* +* Default tasks should be treated as a task with latency_nice = 0. +*/ +#define DEFAULT_LATENCY_NICE 0 +/* * Increase resolution of nice-level calculations for 64-bit architectures. * The extra resolution improves shares distribution and load balancing of
Signature · 1 line
2.17.2
PATCH v5 2/4 sched/core: Propagate parent task's latency requirements to the child task
In reply to Parth ShahClone parent task's latency_nice attribute to the forked child task.
Reset the latency_nice value to default value when the child task is set to sched_reset_on_fork.
Also, initialize init_task.latency_nice value with DEFAULT_LATENCY_NICE value
--- init/init_task.c | 1 + kernel/sched/core.c | 4 ++++ 2 files changed, 5 insertions(+)
init/init_task.c +1 -0
@@ -69,6 +69,7 @@ struct task_struct init_task .prio = MAX_PRIO - 20, .static_prio = MAX_PRIO - 20, .normal_prio = MAX_PRIO - 20, + .latency_nice = 0, .policy = SCHED_NORMAL, .cpus_ptr = &init_task.cpus_mask, .cpus_mask = CPU_MASK_ALL,
kernel/sched/core.c +4 -0
@@ -2847,6 +2847,9 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p)*/ p->prio = current->normal_prio; +/* Propagate the parent's latency requirements to the child as well */ + p->latency_nice = current->latency_nice; +uclamp_fork (p);/*
@@ -2863,6 +2866,7 @@ int sched_fork(unsigned long clone_flags, struct task_struct *p) p->prio = p->normal_prio =__normal_prio (p);set_load_weight (p, false); + p->latency_nice =DEFAULT_LATENCY_NICE ;/* * We don't need the reset flag anymore after the fork. It has * fulfilled its duty:
Signature · 1 line
2.17.2
PATCH v5 3/4 sched: Allow sched_{get,set}attr to change latency_nice of the task
In reply to Parth ShahIntroduce the latency_nice attribute to sched_attr and provide a mechanism to change the value with the use of sched_setattr/sched_getattr syscall.
Also add new flag "SCHED_FLAG_LATENCY_NICE" to hint the change in latency_nice of the task on every sched_setattr syscall.
--- include/uapi/linux/sched.h | 4 +++- include/uapi/linux/sched/types.h | 19 +++++++++++++++++++ kernel/sched/core.c | 18 ++++++++++++++++++ tools/include/uapi/linux/sched.h | 4 +++- 4 files changed, 43 insertions(+), 2 deletions(-)
include/uapi/linux/sched.h +3 -1
@@ -127,6 +127,7 @@ struct clone_args {#define SCHED_FLAG_KEEP_PARAMS 0x10#define SCHED_FLAG_UTIL_CLAMP_MIN 0x20#define SCHED_FLAG_UTIL_CLAMP_MAX 0x40 +#define SCHED_FLAG_LATENCY_NICE 0x80#define SCHED_FLAG_KEEP_ALL (SCHED_FLAG_KEEP_POLICY | \ SCHED_FLAG_KEEP_PARAMS)
@@ -138,6 +139,7 @@ struct clone_args { SCHED_FLAG_RECLAIM | \ SCHED_FLAG_DL_OVERRUN | \ SCHED_FLAG_KEEP_ALL | \ - SCHED_FLAG_UTIL_CLAMP) + SCHED_FLAG_UTIL_CLAMP | \ + SCHED_FLAG_LATENCY_NICE)#endif /* _UAPI_LINUX_SCHED_H */
include/uapi/linux/sched/types.h +19 -0
@@ -10,6 +10,7 @@ struct sched_param {#define SCHED_ATTR_SIZE_VER0 48/* sizeof first published struct */ #define SCHED_ATTR_SIZE_VER1 56/* add: util_{min,max} */ +#define SCHED_ATTR_SIZE_VER2 60/* add: latency_nice */ /* * Extended scheduling parameters data structure.
@@ -96,6 +97,22 @@ struct sched_param {* on a CPU with a capacity big enough to fit the specified value. * A task with a max utilization value smaller than 1024 is more likely * scheduled on a CPU with no more capacity than the specified value. +* +* Latency Tolerance Attributes +* =========================== +* +* A subset of sched_attr attributes allows to specify the relative latency +* requirements of a task with respect to the other tasks running/queued in the +* system. +* +* @ sched_latency_nice task's latency_nice value +* +* The latency_nice of a task can have any value in a range of +* [LATENCY_NICE_MIN..LATENCY_NICE_MAX]. +* +* A task with latency_nice with the value of LATENCY_NICE_MIN can be +* taken for a task with lower latency requirements as opposed to the task with +* higher latency_nice. */ struct sched_attr {__u32 size;
@@ -118,6 +135,8 @@ struct sched_attr {__u32 sched_util_min;__u32 sched_util_max; +/* latency requirement hints */ + __s32 sched_latency_nice; };#endif /* _UAPI_LINUX_SCHED_TYPES_H */
kernel/sched/core.c +18 -0
@@ -4710,6 +4710,9 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); + +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) + p->latency_nice = attr->sched_latency_nice; }/* Actually do priority change: must hold pi & rq lock. */
@@ -4867,6 +4870,13 @@ static int __sched_setscheduler(struct task_struct *p,return retval; } +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) { +if (attr->sched_latency_nice >MAX_LATENCY_NICE ) +return -EINVAL ; +if (attr->sched_latency_nice <MIN_LATENCY_NICE ) +return -EINVAL ; + } +if (pi)cpuset_read_lock ();
@@ -4901,6 +4911,9 @@ static int __sched_setscheduler(struct task_struct *p, goto change;if (attr->sched_flags &SCHED_FLAG_UTIL_CLAMP ) goto change; +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE && + attr->sched_latency_nice != p->latency_nice) + goto change; p->sched_reset_on_fork = reset_on_fork; retval =0 ;
@@ -5149,6 +5162,9 @@ static int sched_copy_attr(struct sched_attr __user *uattr, struct sched_attr *a size < SCHED_ATTR_SIZE_VER1)return -EINVAL ; +if ((attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) && + size <SCHED_ATTR_SIZE_VER2 ) +return -EINVAL ;/* * XXX: Do we want to be lenient like existing syscalls; or do we want * to be strict and return an error on out-of-bounds values?
@@ -5378,6 +5394,8 @@ SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr,else kattr.sched_nice =task_nice (p); + kattr.sched_latency_nice = p->latency_nice; +#ifdef CONFIG_UCLAMP_TASK kattr.sched_util_min = p->uclamp_req[UCLAMP_MIN ].value; kattr.sched_util_max = p->uclamp_req[UCLAMP_MAX ].value;
tools/include/uapi/linux/sched.h +3 -1
@@ -127,6 +127,7 @@ struct clone_args {#define SCHED_FLAG_KEEP_PARAMS 0x10#define SCHED_FLAG_UTIL_CLAMP_MIN 0x20#define SCHED_FLAG_UTIL_CLAMP_MAX 0x40 +#define SCHED_FLAG_LATENCY_NICE 0X80#define SCHED_FLAG_KEEP_ALL (SCHED_FLAG_KEEP_POLICY | \ SCHED_FLAG_KEEP_PARAMS)
@@ -138,6 +139,7 @@ struct clone_args { SCHED_FLAG_RECLAIM | \ SCHED_FLAG_DL_OVERRUN | \ SCHED_FLAG_KEEP_ALL | \ - SCHED_FLAG_UTIL_CLAMP) + SCHED_FLAG_UTIL_CLAMP | \ + SCHED_FLAG_LATENCY_NICE)#endif /* _UAPI_LINUX_SCHED_H */
Signature · 1 line
2.17.2
Dietmar Eggemann
reviewerRe: [PATCH v5 3/4] sched: Allow sched_{get,set}attr to change latency_nice of the task
Quoted 9 lines · Parth Shah
Introduce the
latency_niceattribute tosched_attrand provide a mechanism to change the value with the use of sched_setattr/sched_getattr syscall.Also add new flag "
SCHED_FLAG_LATENCY_NICE" to hint the change inlatency_niceof the task on everysched_setattrsyscall.Signed-off-by Parth Shah <[email protected]>Reviewed-by Qais Yousef <[email protected]>
[...]
ndif /* _UAPI_LINUX_SCHED_TYPES_H */
kernel/sched/core.c static void __setscheduler_params(struct task_struct *p, · line 4716
Quoted 12 lines
kernel/sched/core.c +3
-0@@ -4710,6 +4710,9 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); + +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) + p->latency_nice = attr->sched_latency_nice; }
How do you make sure that p->latency_nice can be set independently from p->static_prio?
AFAICS, util_clamp achieves this by relying on SCHED_FLAG_KEEP_PARAMS, so completely bypassing __setscheduler_params() and using it's own __setscheduler_uclamp().
[...]
Re: [PATCH v5 3/4] sched: Allow sched_{get,set}attr to change latency_nice of the task
Quoted 30 lines · Dietmar Eggemann
Quoted 9 lines · Parth Shah
Introduce the
latency_niceattribute tosched_attrand provide a mechanism to change the value with the use of sched_setattr/sched_getattr syscall.Also add new flag "
SCHED_FLAG_LATENCY_NICE" to hint the change inlatency_niceof the task on everysched_setattrsyscall.Signed-off-by Parth Shah <[email protected]>Reviewed-by Qais Yousef <[email protected]>[...]
ndif /*
_UAPI_LINUX_SCHED_TYPES_H*/kernel/sched/core.c static void __setscheduler_params(struct task_struct *p, · line 4716
Quoted 12 lines
kernel/sched/core.c +3
-0@@ -4710,6 +4710,9 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); + +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) + p->latency_nice = attr->sched_latency_nice; }How do you make sure that
p->latency_nicecan be set independently fromp->static_prio?
Quoted 4 lines
AFAICS,
util_clampachieves this by relying onSCHED_FLAG_KEEP_PARAMS, so completely bypassing__setscheduler_params()and using it's own__setscheduler_uclamp().
Right. good catch.
Use of SCHED_FLAG_LATENCY_NICE/SCHED_FLAG_ALL is must to change latency_nice value, but currently setting latency_nice value also changes static_prio.
One possible solution here is to move the above code to _setscheduler():
kernel/sched/core.c +0 -3
@@ -4731,9 +4731,6 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); - -if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) - p->latency_nice = attr->sched_latency_nice; }/* Actually do priority change: must hold pi & rq lock. */
@@ -4749,6 +4746,13 @@ static void __setscheduler(struct rq *rq, struct
task_struct *p,
__setscheduler_params(p, attr);
+ /*
+ * Change latency_nice value only when SCHED_FLAG_LATENCY_NICE or + * SCHED_FLAG_ALL sched_flag is set. + */
+ if (attr->sched_flags & SCHED_FLAG_LATENCY_NICE)
+ p->latency_nice = attr->sched_latency_nice;
+
This should allow setting value only on above flags, also restricts setting the value when SCHED_FLAG_KEEP_PARAMS/SCHED_FLAG_KEEP_ALL is passed.
Thanks,
Parth
Re: [PATCH v5 3/4] sched: Allow sched_{get,set}attr to change latency_nice of the task
Quoted 72 lines · Parth Shah
Quoted 30 lines · Dietmar Eggemann
Quoted 9 lines · Parth Shah
Introduce the
latency_niceattribute tosched_attrand provide a mechanism to change the value with the use of sched_setattr/sched_getattr syscall.Also add new flag "
SCHED_FLAG_LATENCY_NICE" to hint the change inlatency_niceof the task on everysched_setattrsyscall.Signed-off-by Parth Shah <[email protected]>Reviewed-by Qais Yousef <[email protected]>[...]
ndif /*
_UAPI_LINUX_SCHED_TYPES_H*/kernel/sched/core.c static void __setscheduler_params(struct task_struct *p, · line 4716
Quoted 12 lines
kernel/sched/core.c +3
-0@@ -4710,6 +4710,9 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); + +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) + p->latency_nice = attr->sched_latency_nice; }How do you make sure that
p->latency_nicecan be set independently fromp->static_prio?Quoted 4 lines
AFAICS,
util_clampachieves this by relying onSCHED_FLAG_KEEP_PARAMS, so completely bypassing__setscheduler_params()and using it's own__setscheduler_uclamp().Right. good catch.
Use of SCHED_FLAG_LATENCY_NICE/SCHED_FLAG_ALL is must to changelatency_nicevalue, but currently settinglatency_nicevalue also changesstatic_prio.One possible solution here is to move the above code to
_setscheduler():kernel/sched/core.c +7
-3@@ -4731,9 +4731,6 @@ static void __setscheduler_params(struct task_struct *p, p->rt_priority = attr->sched_priority; p->normal_prio =normal_prio (p);set_load_weight (p, true); - -if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) - p->latency_nice = attr->sched_latency_nice; }/* Actually do priority change: must hold pi & rq lock. */ @@ -4749,6 +4746,13 @@ static void __setscheduler(struct rq *rq, structtask_struct *p,__setscheduler_params (p ,attr ); +/* +* Change latency_nice value only when SCHED_FLAG_LATENCY_NICE or +* SCHED_FLAG_ALL sched_flag is set. +*/ +if (attr->sched_flags &SCHED_FLAG_LATENCY_NICE ) + p->latency_nice = attr->sched_latency_nice; +
Quoted 2 lines
This should allow setting value only on above flags, also restricts setting the value when SCHED_FLAG_KEEP_PARAMS/SCHED_FLAG_KEEP_ALL is passed.
and also get rid of __setscheduler_params(p, attr) when attr->sched_flags == SCHED_FLAG_LATENCY_NICE
Other way is surely to bypass keep_param check just like UCLAMP.
Quoted 5 lines
Thanks,
Parth
PATCH v5 4/4 sched/core: Add permission checks for setting the latency_nice value
In reply to Parth ShahSince the latency_nice uses the similar infrastructure as NICE, use the already existing CAP_SYS_NICE security checks for the latency_nice. This should return -EPERM for the non-root user when trying to set the task latency_nice value to any lower than the current value.
--- kernel/sched/core.c | 4 ++++ 1 file changed, 4 insertions(+)
kernel/sched/core.c +4 -0
@@ -4875,6 +4875,10 @@ static int __sched_setscheduler(struct task_struct *p,return -EINVAL ;if (attr->sched_latency_nice <MIN_LATENCY_NICE )return -EINVAL ; +/* Use the same security checks as NICE */ +if (attr->sched_latency_nice < p->latency_nice && + !capable (CAP_SYS_NICE )) +return -EPERM ; }if (pi)
Signature · 1 line
2.17.2
Quoted 97 lines · Parth Shah
This is the 5th revision of the patch set to introduce
latency_niceas a per task attribute.The previous version can be found at:
v1: https://lkml.org/lkml/2019/11/25/151
v2: https://lkml.org/lkml/2019/12/8/10
v3: https://lkml.org/lkml/2020/1/16/319
v4: https://lkml.org/lkml/2020/2/24/216Changes in this revision are:
v4->v5:
- Added debugging prints in /proc/<pid>/sched forlatency_nice( based on suggestion from Pavan Kondeti )
- Initializedinit_taskwithlatency_nice= 0
- Collected review tag and added few minor fixes.v3->v4:
- Based on Chris's comment, added security check to refrain non-root user set lower value than the currentlatency_nicevalues.
v2 -> v3:
- This series changes the longer attribute name to "latency_nice" as per the comment from Dietmar Eggemann https://lkml.org/lkml/2019/12/5/394
v1 -> v2:
- Addressed comments from Qais Yousef
- As per suggestion from Dietmar, moved content from newly createdinclude/linux/sched/latency_tolerance.htokernel/sched/sched.h
- Extendsched_setattr()to supportlatency_tolerancein tools headers UAPIIntroduction:
==============
This patch series introduces a new per-task attributelatency_niceto provide the scheduler hints about the latency requirements of the task [1].
Latency_niceis a ranged attribute of a task with the value ranging from [-20, 19] both inclusive which makes it align with the task nice value.The value should provide scheduler hints about the relative latency requirements of tasks, meaning the task with "
latency_nice= -20" should have lower latency requirements than compared to those tasks with higher values. Similarly a task with "latency_nice= 19" can have higher latency and hence such tasks may not care much about latency.The default value is set to 0. The usecases discussed below can use this range of [-20, 19] for
latency_nicefor the specific purpose. This patch does not implement any use cases for such attribute so that any change in naming or range does not affect much to the other (future) patches using this. The actual use oflatency_niceduring task wakeup and load-balancing is yet to be coded for each of those usecases.As per my view, this defined attribute can be used in following ways for a some of the usecases:
1 Reduce search scan time forselect_idle_cpu():
- Reduce search scans for finding idle CPU for a waking task with lowerlatency_nicevalues.2 TurboSched:
- Classify the tasks with higherlatency_nicevalues as a small background task given that its historic utilization is very low, for which the scheduler can search for more number of cores to do task packing. A task with alatency_nice>=some_threshold(e.g, == 19) and util <= 12.5% can be background tasks.3 Optimize AVX512 based workload:
- Bias scheduler to not put a task having (latency_nice== -20) on a core occupying AVX512 based workload.Series Organization:
====================
- Patch 1-3: Add support forlatency_niceattr in the task struct using sched_{set,get}attr syscall
- Patch 4 : Add permission checks for setting the value.The patch series can be applied on tip/sched/core at the
commita0f03b617c3b("sched/numa: Stop an exhastive search if a reasonable swap candidate or idle CPU is found")References:
============
[1]. Usecases for the per-task latency-nice attribute,https://lkml.org/lkml/2019/9/30/215 [2]. Task Latency-nice, "Subhra Mazumdar", https://lkml.org/lkml/2019/8/30/829 [3]. Introduce per-task latency_tolerance for scheduler hints, https://lkml.org/lkml/2019/12/8/10Parth Shah (4):
sched: Introduce latency-nice as a per-task attribute sched/core: Propagate parent task's latency requirements to the child
task
sched: Allow sched_{get,set}attr to changelatency_niceof the task sched/core: Add permission checks for setting thelatency_nicevalue
Quoted 9 lines
include/linux/sched.h | 1 + include/uapi/linux/sched.h | 4 +++- include/uapi/linux/sched/types.h | 19 +++++++++++++++++++ init/init_task.c | 1 + kernel/sched/core.c | 26 ++++++++++++++++++++++++++ kernel/sched/debug.c | 1 + kernel/sched/sched.h | 18 ++++++++++++++++++ tools/include/uapi/linux/sched.h | 4 +++- 8 files changed, 72 insertions(+), 2 deletions(-)
I've now had a chance to test and play with this a fair amount. It looks good, meets the need. Thanks Parth.
-chrish