Skip to contentSkip to conversation

clk: rockchip: Fix video codec clocks on rk3288

PATCH In review Douglas Anderson 2 participants 2 messages Apr 11, 2019 – Apr 12, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 clk: rockchip: Fix video codec clocks on rk3288

It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around.

How do I know? Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked.
2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK.
3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested by Jonas Karlman. Prior to the same commit you could do clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu". That's because "aclk_vcodec" was a simple gate clock (always gets CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After that commit "aclk_vcodec_pre" gets in the way so we need to add CLK_SET_RATE_PARENT to it too.

[1] https://lkml.kernel.org/r/[email protected]

Fixes 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")

---

Changes in v2:
- Now also has CLK_SET_RATE_PARENT for "aclk_vcodec_pre"
- Added Suggested-by tags for prior work
- Added link to Elaine saying that this is indeed correct

 drivers/clk/rockchip/clk-rk3288.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/rockchip/clk-rk3288.c +2 -2
index 5a67b7869960..51e8e799debb 100644
@@ -219,7 +219,7 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vepu", "aclk_vdpu" };
+PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vdpu", "aclk_vepu" };
 PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
 				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
@@ -420,7 +420,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
 			RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 11, GFLAGS),
-	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, 0,
+	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, CLK_SET_RATE_PARENT,
 			RK3288_GRF_SOC_CON(0), 7, 1, MFLAGS),
 	GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vcodec_pre", 0,
 		RK3288_CLKGATE_CON(9), 0, GFLAGS),
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
maintainer
#1 lore raw

Am Donnerstag, 11. April 2019, 15:55:55 CEST schrieb Douglas Anderson:

Quoted 39 lines

It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around.

How do I know? Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked.
2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK.
3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested by Jonas Karlman. Prior to the same commit you could do clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu". That's because "aclk_vcodec" was a simple gate clock (always gets CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After that commit "aclk_vcodec_pre" gets in the way so we need to add CLK_SET_RATE_PARENT to it too.

Quoted 6 lines

[1] https://lkml.kernel.org/r/[email protected]

Fixes 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")

applied for 5.2

Thanks
Heiko