Skip to contentSkip to conversation

Some fixes and doc updates for virtio-user

PATCH Applied Tiwei Bie 2 participants 8 messages Sep 21, 2018 – Sep 27, 2018 Network drivers

lore
Share & tools
lore

Tiwei Bie

author
#0 lore raw

cover Some fixes and doc updates for virtio-user

This series consists of some fixes and doc updates for virtio-user.

Tiwei Bie (3):
net/virtio-user: fix multiple queue for vhost-kernel net/virtio: add the missing supported features
doc: update the doc for virtio-user

 doc/guides/contributing/documentation.rst     |  4 ++--
 .../howto/virtio_user_as_exceptional_path.rst | 23 +++++++++++--------
 .../virtio_user_for_container_networking.rst  |  2 +-
 drivers/net/virtio/virtio_ethdev.h            |  5 +++-
 .../net/virtio/virtio_user/virtio_user_dev.c  |  4 +---
 5 files changed, 21 insertions(+), 17 deletions(-)
Signature · 1 line
2.18.0
author
#1 lore raw

PATCH 1/3 net/virtio-user: fix multiple queue for vhost-kernel

The multiple queue support in vhost-kernel is broken because the dev->vhostfd is only available for vhost-user. We should always try to enable queue pairs when it's not in server mode.

Fixes 201a41651715 ("net/virtio-user: fix multiple queues fail in server mode")
---
 drivers/net/virtio/virtio_user/virtio_user_dev.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/virtio/virtio_user/virtio_user_dev.c +1 -3
index 869e96f87..55a82e4b0 100644
@@ -549,13 +549,11 @@ virtio_user_handle_mq(struct virtio_user_dev *dev, uint16_t q_pairs)
 	/* Server mode can't enable queue pairs if vhostfd is invalid,
 	 * always return 0 in this case.
 	 */
-	if (dev->vhostfd >= 0) {
+	if (!dev->is_server || dev->vhostfd >= 0) {
 		for (i = 0; i < q_pairs; ++i)
 			ret |= dev->ops->enable_qp(dev, i, 1);
 		for (i = q_pairs; i < dev->max_queue_pairs; ++i)
 			ret |= dev->ops->enable_qp(dev, i, 0);
-	} else if (!dev->is_server) {
-		ret = ~0;
 	}
 	dev->queue_pairs = q_pairs;
 
Signature · 1 line
2.18.0
Reviewed-by on v1 1/3
#2 lore raw

Re: [PATCH 1/3] net/virtio-user: fix multiple queue for vhost-kernel

Quoted 4 lines · Tiwei Bie

The multiple queue support in vhost-kernel is broken because the dev->vhostfd is only available for vhost-user. We should always try to enable queue pairs when it's not in server mode.

Quoted 8 lines
Fixes 201a41651715 ("net/virtio-user: fix multiple queues fail in server mode")
---
  drivers/net/virtio/virtio_user/virtio_user_dev.c | 4 +---
  1 file changed, 1 insertion(+), 3 deletions(-)

Thanks,
Maxime

author
#3 lore raw

PATCH 2/3 net/virtio: add the missing supported features

In reply to Tiwei Bie

The virtio features VIRTIO_NET_F_CSUM, VIRTIO_NET_F_HOST_TSO4 and VIRTIO_NET_F_HOST_TSO6 are supported by the virtio PMD. But they are missing in the supported feature set. And since below commit:

commit 4174a7b59d05 ("net/virtio: improve Tx offload features negotiation")

Virtio PMD will announce the Tx offloading capabilities based on the features read from the device. And virtio-user won't report the features which are not in virtio-PMD's supported feature set. So since that commit, virtio-user won't announce the DEV_TX_OFFLOAD_UDP_CKSUM, DEV_TX_OFFLOAD_TCP_CKSUM and DEV_TX_OFFLOAD_TCP_TSO offloading capabilities even if the vhost backend supports them.

This patch adds these missing features, and virtio-user will report them if the backend supports them.

Fixes 142678d42959 ("net/virtio-user: fix wrongly get/set features")
---
 drivers/net/virtio/virtio_ethdev.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/virtio/virtio_ethdev.h +4 -1
index b726ad108..e0f80e5a4 100644
@@ -40,7 +40,10 @@
 	(VIRTIO_PMD_DEFAULT_GUEST_FEATURES |	\
 	 1u << VIRTIO_NET_F_GUEST_CSUM	   |	\
 	 1u << VIRTIO_NET_F_GUEST_TSO4     |	\
-	 1u << VIRTIO_NET_F_GUEST_TSO6)
+	 1u << VIRTIO_NET_F_GUEST_TSO6     |	\
+	 1u << VIRTIO_NET_F_CSUM           |	\
+	 1u << VIRTIO_NET_F_HOST_TSO4      |	\
+	 1u << VIRTIO_NET_F_HOST_TSO6)
 
 /*
  * CQ function prototype
Signature · 1 line
2.18.0
Reviewed-by on v1 2/3
#4 lore raw

Re: [PATCH 2/3] net/virtio: add the missing supported features

Quoted 18 lines · Tiwei Bie

The virtio features VIRTIO_NET_F_CSUM, VIRTIO_NET_F_HOST_TSO4 and VIRTIO_NET_F_HOST_TSO6 are supported by the virtio PMD. But they are missing in the supported feature set. And since below commit:

commit 4174a7b59d05 ("net/virtio: improve Tx offload features negotiation")

Virtio PMD will announce the Tx offloading capabilities based on the features read from the device. And virtio-user won't report the features which are not in virtio-PMD's supported feature set. So since that commit, virtio-user won't announce the DEV_TX_OFFLOAD_UDP_CKSUM, DEV_TX_OFFLOAD_TCP_CKSUM and DEV_TX_OFFLOAD_TCP_TSO offloading capabilities even if the vhost backend supports them.

This patch adds these missing features, and virtio-user will report them if the backend supports them.

Quoted 7 lines
Fixes 142678d42959 ("net/virtio-user: fix wrongly get/set features")
---
  drivers/net/virtio/virtio_ethdev.h | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)
author
#5 lore raw

PATCH 3/3 doc: update the doc for virtio-user

In reply to Tiwei Bie

Update the doc for virtio-user to use the latest testpmd parameters and commands.

---
 doc/guides/contributing/documentation.rst     |  4 ++--
 .../howto/virtio_user_as_exceptional_path.rst | 23 +++++++++++--------
 .../virtio_user_for_container_networking.rst  |  2 +-
 3 files changed, 16 insertions(+), 13 deletions(-)
doc/guides/contributing/documentation.rst +2 -2
index 6a075553d..097575ad7 100644
@@ -297,8 +297,8 @@ Line Length
 
      testpmd -l 2-3 -n 4 \
              --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \
-             -- -i --txqflags=0x0 --enable-hw-vlan --enable-lro \
-             --enable-rx-cksum --txq=2 --rxq=2 --rxd=1024  --txd=1024
+             -- -i --tx-offloads=0x0000002c --enable-lro --txq=2 --rxq=2 \
+             --txd=1024 --rxd=1024
 
 
 Whitespace
doc/guides/howto/virtio_user_as_exceptional_path.rst +13 -10
index 6a13c761e..4910c12df 100644
@@ -57,8 +57,8 @@ compiling the kernel and those kernel modules should be inserted.
 
         $(testpmd) -l 2-3 -n 4 \
 		--vdev=virtio_user0,path=/dev/vhost-net,queue_size=1024 \
-		-- -i --txqflags=0x0 --enable-lro \
-		--enable-rx-cksum --rxd=1024 --txd=1024
+		-- -i --tx-offloads=0x0000002c --enable-lro \
+		--txd=1024 --rxd=1024
 
     This command runs testpmd with two ports, one physical NIC to communicate
     with outside, and one virtio-user to communicate with kernel.
@@ -69,11 +69,6 @@ compiling the kernel and those kernel modules should be inserted.
     VIRTIO_NET_F_GUEST_TSO6 feature so that large packets from kernel can be
     transmitted to DPDK application and further TSOed by physical NIC.
 
-* ``--enable-rx-cksum``
-
-    This is used to negotiate VIRTIO_NET_F_GUEST_CSUM so that packets from
-    kernel can be deemed as valid Rx checksumed.
-
 * ``queue_size``
 
     256 by default. To avoid shortage of descriptors, we can increase it to 1024.
@@ -86,9 +81,17 @@ compiling the kernel and those kernel modules should be inserted.
 
         $(testpmd) -l 2-3 -n 4 \
 		--vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \
-		-- -i --txqflags=0x0 --enable-lro \
-		--enable-rx-cksum --txq=2 --rxq=2 --rxd=1024 \
-		--txd=1024
+		-- -i --tx-offloads=0x0000002c --enable-lro \
+		--txq=2 --rxq=2 --txd=1024 --rxd=1024
+
+#. Enable Rx checksum offloads in testpmd:
+
+    .. code-block:: console
+
+        (testpmd) port stop 0
+        (testpmd) port config 0 rx_offload tcp_cksum on
+        (testpmd) port config 0 rx_offload udp_cksum on
+        (testpmd) port start 0
 
 #. Start testpmd:
 
doc/guides/howto/virtio_user_for_container_networking.rst +1 -1
index 476ce3a63..2313dc794 100644
@@ -96,7 +96,7 @@ some minor changes.
             dpdk-app-testpmd testpmd -l 6-7 -n 4 -m 1024 --no-pci \
             --vdev=virtio_user0,path=/var/run/usvhost \
             --file-prefix=container \
-            -- -i --txqflags=0xf00 --disable-hw-vlan
+            -- -i
 
 Note: If we run all above setup on the host, it's a shm-based IPC.
 
Signature · 1 line
2.18.0
Reviewed-by on v1 3/3
#6 lore raw

Re: [PATCH 3/3] doc: update the doc for virtio-user

Quoted 10 lines · Tiwei Bie

Update the doc for virtio-user to use the latest testpmd parameters and commands.

---
  doc/guides/contributing/documentation.rst     |  4 ++--
  .../howto/virtio_user_as_exceptional_path.rst | 23 +++++++++++--------
  .../virtio_user_for_container_networking.rst  |  2 +-
  3 files changed, 16 insertions(+), 13 deletions(-)

Thanks!
Maxime

#7 lore raw
In reply to Tiwei Bie
Quoted 8 lines · Tiwei Bie

This series consists of some fixes and doc updates for virtio-user.

Tiwei Bie (3):
net/virtio-user: fix multiple queue for vhost-kernel net/virtio: add the missing supported features
doc: update the doc for virtio-user

Quoted 7 lines
  doc/guides/contributing/documentation.rst     |  4 ++--
  .../howto/virtio_user_as_exceptional_path.rst | 23 +++++++++++--------
  .../virtio_user_for_container_networking.rst  |  2 +-
  drivers/net/virtio/virtio_ethdev.h            |  5 +++-
  .../net/virtio/virtio_user/virtio_user_dev.c  |  4 +---
  5 files changed, 21 insertions(+), 17 deletions(-)

Applied to dpdk-next-virtio/master.

Thanks,
Maxime