Problem using unix source in do_compile
A message that is not in the archive (sent off-list or not yet received): 1946107905.7106433.1448198721454.JavaMail.yahoo.ref@mail.yahoo.com
Hi all,I am trying to use run the bitbake on a recipe that in the do_compile uses the unix command source.This is the error that I am getting. Log data follows:| DEBUG: Executing shell function do_compile
| /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: source: not found | WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At github I have the original inc file that is used by the recipe fpga-image-adi.bb
87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard_yocto/commits/master/fpga-image.inc
I made some changes which allows me to manually run the Xilinx commands and then re-run the bitbake fpga-image-adithe version e199e9ce0806dc257fcafdda26de29f4cd443e24regards, Edward Vidal Jr. e-mail [email protected] 915-595-1613
Hi Edward,
Quoted 14 lines · On Sunday 22 November 2015 13:25:21 Edward Vidal wrote:
Hi all,I am trying to use run the bitbake on a recipe that in the
do_compileuses the unix command source.This is the error that I am getting. Log data follows:| DEBUG: Executing shell functiondo_compile| /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: | source: not found WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At | github I have the original inc file that is used by the recipe | fpga-image-adi.bb
Quoted 4 lines
87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard _yocto/commits/master/fpga-image.inc I made some changes which allows me to manually run the Xilinx commands and then re-run the bitbake fpga-image-adithe version
e199e9ce0806dc257fcafdda26de29f4cd443e24
If I had to guess I'd say you're on Ubuntu or another system where /bin/sh is dash and not bash, is that correct? If so, "source" is a bash-specific command
- the POSIX standard equivalent is '.' (without quotes), so you'll need to use that instead.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Hello Paul,
Thanks for your quick rely.
Yes, I am running "ubuntu 12.04 x86_64".
In a shell before or after running ". oe-init-build-env" either of these 2 commands below work okay."source /opt/Xilinx/14.6/ISE_DS/settings64.sh" or ". /opt/Xilinx/14.6/ISE_DS/settings64.sh"
I am able to run (Xilinx Platform Studio) "xps" okay.
I replaced 4 of source cmds with '.'
Now I get the following error when I execute "bitbake fpga-image-adi"
ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830)
ERROR: Logfile of failure stored in: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830 Log data follows:
| DEBUG: Executing shell function do_compile | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 12: [: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: unexpected operator | . /opt/Xilinx/14.6/ISE_DS/common/.settings64.sh /opt/Xilinx/14.6/ISE_DS/common | . /opt/Xilinx/14.6/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.6/ISE_DS/EDK | . /opt/Xilinx/14.6/ISE_DS/PlanAhead/.settings64.sh /opt/Xilinx/14.6/ISE_DS/PlanAhead | . /opt/Xilinx/14.6/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.6/ISE_DS/ISE | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 113: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: xps: not found | WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830)
ERROR: Task 6 (/home/vidal/POKY/dora_build/poky/meta-topic/recipes-bsp/fpga/fpga-image-adi.bb, do_compile) failed with exit code '1' What is the unexpected operator?I am attaching the log file. Thanks in advance for any and all help.Regards,
Edward Vidal Jr. e-mail [email protected] 915-595-1613
On Sunday, November 22, 2015 3:35 PM, Paul Eggleton <[email protected]> wrote:
Hi Edward,
Quoted 14 lines · On Sunday 22 November 2015 13:25:21 Edward Vidal wrote:
Hi all,I am trying to use run the bitbake on a recipe that in the
do_compileuses the unix command source.This is the error that I am getting. Log data follows:| DEBUG: Executing shell functiondo_compile| /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: 112: | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: | source: not found WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.25492)At | github I have the original inc file that is used by the recipe | fpga-image-adi.bb
Quoted 4 lines
87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboard _yocto/commits/master/fpga-image.inc I made some changes which allows me to manually run the Xilinx commands and then re-run the bitbake fpga-image-adithe version
e199e9ce0806dc257fcafdda26de29f4cd443e24
If I had to guess I'd say you're on Ubuntu or another system where /bin/sh is dash and not bash, is that correct? If so, "source" is a bash-specific command
- the POSIX standard equivalent is '.' (without quotes), so you'll need to use that instead.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Quoted 23 lines · On Monday 23 November 2015 19:08:27 Edward Vidal wrote:
Edward Vidal Jr. e-mail [email protected] 915-595-1613 wrote:
On Sunday, November 22, 2015 3:35 PM, Paul EggletonQuoted 20 lines · <[email protected]> wrote:
Quoted 19 lines · On Sunday 22 November 2015 13:25:21 Edward Vidal wrote:
Hi all,I am trying to use run the bitbake on a recipe that in the
do_compileuses the unix command source.This is the error that I am getting. Log data follows:| DEBUG: Executing shell functiondo_compile| /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux- | gnue | ab/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.25492: | 112: /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky- | linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858- | r0/temp/run.do_compile.25492: | source: not found WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux- | gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858- | r0/temp/log.do_compile.25492) | At github I have the original inc file that is used by the recipe | fpga-image-adi.bb
87a75850b6f36bf1f09ac0f071587629ba630c1ehttps://github.com/develone/zedboa
Quoted 49 lines
Quoted 8 lines
Quoted 3 lines
rd _yocto/commits/master/fpga-image.inc I made some changes which allows me to manually run the Xilinx commands and then re-run the bitbake fpga-image-adithe version
e199e9ce0806dc257fcafdda26de29f4cd443e24If I had to guess I'd say you're on Ubuntu or another system where
/bin/shis dash and not bash, is that correct? If so, "source" is a bash-specific command - the POSIX standard equivalent is '.' (without quotes), so you'll need to use that instead.Yes, I am running "ubuntu 12.04
x86_64".In a shell before or after running ". oe-init-build-env" either of these 2 commands below work okay."source
/opt/Xilinx/14.6/ISE_DS/settings64.sh" or "./opt/Xilinx/14.6/ISE_DS/settings64.sh"I am able to run (Xilinx Platform Studio) "xps" okay.
I replaced 4 of source cmds with '.'
Now I get the following error when I execute "bitbake fpga-image-adi"
ERROR: Function failed:
do_compile(log file is located at/home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830) ERROR:
Logfile of failure stored in:/home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueabi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830 Log data follows:| DEBUG: Executing shell function do_compile | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnueab | i/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 12: [: | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: | unexpected operator | . /opt/Xilinx/14.6/ISE_DS/common/.settings64.sh | /opt/Xilinx/14.6/ISE_DS/common . | /opt/Xilinx/14.6/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.6/ISE_DS/EDK . | /opt/Xilinx/14.6/ISE_DS/PlanAhead/.settings64.sh | /opt/Xilinx/14.6/ISE_DS/PlanAhead . | /opt/Xilinx/14.6/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.6/ISE_DS/ISE | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: 113: | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/run.do_compile.12830: | xps: not found | WARNING: exit code 127 from a shell command. | ERROR: Function failed: do_compile (log file is located at | /home/vidal/POKY/dora_build/poky/build/tmp/work/zedboard-poky-linux-gnuea | bi/fpga-image-adi/1.AUTOINC-3e6cfd4858-r0/temp/log.do_compile.12830)
Quoted 4 lines
ERROR: Task 6 (
/home/vidal/POKY/dora_build/poky/meta-topic/recipes-bsp/fpga/fpga-image-adi.bb,do_compile) failed with exit code '1' What is the unexpected operator?
No idea I'm afraid. You are putting just one . <scriptfile> on the same line right?
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre