doc: fix references to driver-model
Subsystems (2)
PATCH 1/1 doc: fix references to driver-model
Fix some errors pointed out by 'make refcheckdocs'.
--- doc/README.drivers.eth | 2 +- doc/README.fdt-control | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/kona_i2c.c | 2 +- drivers/i2c/sh_i2c.c | 2 +- drivers/i2c/soft_i2c.c | 2 +- tools/dtoc/dtb_platdata.py | 4 ++-- tools/dtoc/dtoc.py | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
doc/README.drivers.eth +1 -1
@@ -2,7 +2,7 @@ This guide describes to the old way of doing things. No new Ethernet drivers should be implemented this way. All new drivers should be written against the -U-Boot core driver model. See doc/driver-model/README.txt +U-Boot core driver model. See doc/driver-model/index.rst. ----------------------- Ethernet Driver Guide
doc/README.fdt-control +1 -1
@@ -182,7 +182,7 @@ U-Boot can be divided into three phases: TPL, SPL and U-Boot proper. The full device tree is available to U-Boot proper, but normally only a subset (or none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and -'SPL Support' in doc/driver-model/README.txt for more details. +'SPL Support' in doc/driver-model/design.rst for more details. Using several DTBs in the SPL (CONFIG_SPL_MULTI_DTB)
drivers/i2c/davinci_i2c.c +1 -1
@@ -8,7 +8,7 @@* -------------------------------------------------------- * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h>
drivers/i2c/kona_i2c.c +1 -1
@@ -3,7 +3,7 @@* Copyright 2013 Broadcom Corporation. * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h>
drivers/i2c/sh_i2c.c +1 -1
@@ -4,7 +4,7 @@* Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <[email protected]> * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h>
drivers/i2c/soft_i2c.c +1 -1
@@ -12,7 +12,7 @@* Neil Russell. * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h>
tools/dtoc/dtb_platdata.py +2 -2
@@ -423,7 +423,7 @@ class DtbPlatdata(object): This writes out the body of a header file consisting of structure definitions for node in self._valid_nodes. See the documentation in - README.of-plat for more information. + doc/driver-model/of-plat.rst for more information. """ self.out_header() self.out('#include <stdbool.h>\n')
@@ -527,7 +527,7 @@ class DtbPlatdata(object): U_BOOT_DEVICE() declarations for each valid node. Where a node has multiple compatible strings, a #define is used to make them equivalent. - See the documentation in doc/driver-model/of-plat.txt for more + See the documentation in doc/driver-model/of-plat.rst for more information. """ self.out_header()
tools/dtoc/dtoc.py +1 -1
@@ -22,7 +22,7 @@ Dtoc produces two output files: This tool is used in U-Boot to provide device tree data to SPL without increasing the code size of SPL. This supports the CONFIG_SPL_OF_PLATDATA options. For more information about the use of this options and tool please -see doc/driver-model/of-plat.txt +see doc/driver-model/of-plat.rst """ from __future__ import print_function
--
2.25.0
PATCH 1/1 doc: fix references to driver-model
Quoted 4 lines · Heinrich Schuchardt
Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>
Quoted 10 lines
--- doc/README.drivers.eth | 2 +- doc/README.fdt-control | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/kona_i2c.c | 2 +- drivers/i2c/sh_i2c.c | 2 +- drivers/i2c/soft_i2c.c | 2 +- tools/dtoc/dtb_platdata.py | 4 ++-- tools/dtoc/dtoc.py | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)
PATCH 1/1 doc: fix references to driver-model
In reply to Heinrich SchuchardtHi Heinrich
Quoted 7 lines
From: U-Boot <[email protected]> On Behalf Of Heinrich Schuchardt
Sent: mardi 25 f?vrier 2020 21:36Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>---
I found also the same issue in
-------------------------------- doc/README.SPL -------------------------------- index 4e3478a13a..929b9672b0 100644
@@ -81,7 +81,7 @@ fdtgrep is also used to remove:
('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
All the nodes remaining in the SPL devicetree are bound
-(see driver-model/README.txt).
+(see driver-model/design.rst).
Debugging
---------
Quoted 17 lines
doc/README.drivers.eth | 2 +- doc/README.fdt-control | 2 +- drivers/i2c/davinci_i2c.c | 2 +- drivers/i2c/kona_i2c.c | 2 +- drivers/i2c/sh_i2c.c | 2 +- drivers/i2c/soft_i2c.c | 2 +- tools/dtoc/dtb_platdata.py | 4 ++-- tools/dtoc/dtoc.py | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)doc/README.drivers.eth index renamed from doc/README.drivers.eth +0
-0
1a9a23b51b..acaf11fea3100644doc/README.drivers.eth +0
-0@@ -2,7 +2,7 @@ This guide describes to the old way of doing things. No new Ethernet drivers
Quoted 3 lines
should be implemented this way. All new drivers should be written against the -U- Boot core driver model. See
doc/driver-model/README.txt
+U-Boot core driver model. Seedoc/driver-model/index.rst.
index.rst or design.rst as in the next file ?
doc/driver-model/README.txt is replaced by design.rst in commit ed205e677b6f ('doc: driver-model: Convert README.txt to rest')
Quoted 103 lines
-----------------------
Ethernet Driver Guidedoc/README.fdt-control index renamed from doc/README.fdt-control +0
-0
e53cf51875..424d13fc5b100644doc/README.fdt-control +0
-0@@ -182,7 +182,7 @@ U-Boot can be divided into three phases: TPL, SPL and U-Boot proper.
The full device tree is available to U-Boot proper, but normally only a subset (or
none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and -'SPL Support' indoc/driver-model/README.txtfor more details.
+'SPL Support' indoc/driver-model/design.rstfor more details.Using several DTBs in the SPL (
CONFIG_SPL_MULTI_DTB) diff --gita/drivers/i2c/davinci_i2c.cb/drivers/i2c/davinci_i2c.cindex2c77234c60..edc40f706c100644drivers/i2c/davinci_i2c.c +1
-1@@ -8,7 +8,7 @@* -------------------------------------------------------- * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h> drivers/i2c/kona_i2c.c index renamed from drivers/i2c/kona_i2c.c +0
-0
0726b4c956..8e31481c0f100644drivers/i2c/kona_i2c.c +1
-1@@ -3,7 +3,7 @@* Copyright 2013 Broadcom Corporation. * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h> drivers/i2c/sh_i2c.c index b69d213593..834f1f2179 renamed from drivers/i2c/sh_i2c.c +0
-0100644
drivers/i2c/sh_i2c.c +0
-0@@ -4,7 +4,7 @@* Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <[email protected]>
*
* NOTE: This driver should be converted to driver model before June 2017.
- * Please seedoc/driver-model/i2c-howto.txtfor instructions.
+ * Please seedoc/driver-model/i2c-howto.rstfor instructions. */#include <
common.h>drivers/i2c/soft_i2c.c index renamed from drivers/i2c/soft_i2c.c +0
-0
7f0303cc05..9ad1c281ff100644drivers/i2c/soft_i2c.c +1
-1@@ -12,7 +12,7 @@* Neil Russell. * * NOTE: This driver should be converted to driver model before June 2017. -* Please see doc/driver-model/i2c-howto.txt for instructions. +* Please see doc/driver-model/i2c-howto.rst for instructions. */ #include <common.h> tools/dtoc/dtb_platdata.py index renamed from tools/dtoc/dtb_platdata.py +0
-0
037e82c8bb..90a9e1a626100644tools/dtoc/dtb_platdata.py +1
-1@@ -423,7 +423,7 @@ class DtbPlatdata(object): This writes out the body of a header file consisting of structure definitions for node in self._valid_nodes. See the documentation in - README.of-plat for more information. + doc/driver-model/of-plat.rst for more information. """ self.out_header() self.out('#include <stdbool.h>\n') @@ -527,7 +527,7 @@ classDtbPlatdata(object):
U_BOOT_DEVICE()declarations for each valid node. Where a node has multiple compatible strings, a #define is used to make them equivalent.tools/dtoc/dtb_platdata.py +1
-1- See the documentation in doc/driver-model/of-plat.txt for more + See the documentation in doc/driver-model/of-plat.rst for more information. """ self.out_header()tools/dtoc/dtoc.py index b3596a5918..f31cba900e renamed from tools/dtoc/dtoc.py +0
-0100755
tools/dtoc/dtoc.py +0
-0@@ -22,7 +22,7 @@ Dtoc produces two output files: This tool is used in U-Boot to provide device tree data to SPL without increasingthe code size of SPL. This supports the
CONFIG_SPL_OF_PLATDATAoptions. For more information about the use of this options and tool please -seedoc/driver-model/of-plat.txt
+seedoc/driver-model/of-plat.rst
"""
Quoted 3 lines
from
__future__importprint_function
--
2.25.0
Regards
Patrick
PATCH 1/1 doc: fix references to driver-model
Hi,
Quoted 16 lines
From: U-Boot <[email protected]> On Behalf Of Patrick DELAUNAY
Sent: vendredi 28 f?vrier 2020 14:49Hi Heinrich
Quoted 8 lines
From: U-Boot <[email protected]> On Behalf Of Heinrich Schuchardt
Sent: mardi 25 f?vrier 2020 21:36Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>---
I found also the same issue in
Quoted 8 lines
-------------------------------- doc/README.SPL -------------------------------- index
4e3478a13a..929b9672b0100644 @@ -81,7 +81,7 @@ fdtgrep is also used to remove:('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')All the nodes remaining in the SPL devicetree are bound -(see driver-
model/README.txt).
+(seedriver-model/design.rst).
Edit: need to add "doc/"
+( see doc/driver-model/design.rst)
Regards
Patrick
PATCH 1/1 doc: fix references to driver-model
Quoted 27 lines · Patrick DELAUNAY
Hi,
Quoted 16 lines
From: U-Boot <[email protected]> On Behalf Of Patrick DELAUNAY
Sent: vendredi 28 f?vrier 2020 14:49Hi Heinrich
Quoted 8 lines
From: U-Boot <[email protected]> On Behalf Of Heinrich Schuchardt
Sent: mardi 25 f?vrier 2020 21:36Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>---
I found also the same issue in
Quoted 8 lines
-------------------------------- doc/README.SPL -------------------------------- index
4e3478a13a..929b9672b0100644 @@ -81,7 +81,7 @@ fdtgrep is also used to remove:('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')All the nodes remaining in the SPL devicetree are bound -(see driver-
model/README.txt).
+(seedriver-model/design.rst).
Quoted 6 lines
Edit: need to add "doc/"
+( see
doc/driver-model/design.rst)Regards
Patrick
Please, create an additional patch.
Best regards
Heinrich
Quoted 1 line
PATCH 1/1 doc: fix references to driver-model
Hi Heinrich
Quoted 38 lines
From: Heinrich Schuchardt <[email protected]>
Sent: vendredi 28 f?vrier 2020 18:38Quoted 34 lines · Patrick DELAUNAY
Hi,
Quoted 22 lines
From: U-Boot <[email protected]> On Behalf Of Patrick DELAUNAY
Sent: vendredi 28 f?vrier 2020 14:49Hi Heinrich
Quoted 8 lines
From: U-Boot <[email protected]> On Behalf Of Heinrich Schuchardt
Sent: mardi 25 f?vrier 2020 21:36Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>---
I found also the same issue in
-------------------------------- doc/README.SPL -------------------------------- index
4e3478a13a..929b9672b0100644 @@ -81,7 +81,7 @@ fdtgrep is also used to
remove:Quoted 5 lines
('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')All the nodes remaining in the SPL devicetree are bound -(see
driver-model/README.txt).
+(seedriver-model/design.rst).Edit: need to add "doc/"
+( see
doc/driver-model/design.rst)
Quoted 8 lines
Quoted 2 lines
Regards
PatrickPlease, create an additional patch.
Best regards
Heinrich
FYI: done in http://patchwork.ozlabs.org/patch/1247524/
Regards
Patrick
PATCH 1/1 doc: fix references to driver-model
In reply to Heinrich SchuchardtQuoted 4 lines · Heinrich Schuchardt
Fix some errors pointed out by 'make refcheckdocs'.
Signed-off-by Heinrich Schuchardt <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200421/4e1fdf1c/attachment.sig>