Skip to contentSkip to conversation

Please update board-2.bin for QCA9888

DISCUSSION Ben Greear 3 participants 6 messages Mar 3, 2017 – Apr 20, 2017 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Newer 9886 (which use the 9888 firmware it seems) NICs will not boot unless you use the board-2.bin from the codeaura repo.

Kalle: Could you update your repo to the latest from codeaura so that it is easy to pull the latest board file into LEDE?

If you have reason not to, please let me know.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 7 lines · Ben Greear

Newer 9886 (which use the 9888 firmware it seems) NICs will not boot unless you use the board-2.bin from the codeaura repo.

Kalle: Could you update your repo to the latest from codeaura so that it is easy to pull the latest board file into LEDE?

If you have reason not to, please let me know.

I'm not involved with codeaurora repositories so I don't know what file you are talking about. What's the URL?

Signature · 5 lines
Kalle Valo
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author
#2 lore raw
Quoted 5 lines · Kalle
Quoted 3 lines · Ben Greear

Newer 9886 (which use the 9888 firmware it seems) NICs will not boot unless you use the board-2.bin from the codeaura repo.

Quoted 8 lines
Quoted 4 lines

Kalle: Could you update your repo to the latest from codeaura so that it is easy to pull the latest board file into LEDE?

If you have reason not to, please let me know.

I'm not involved with codeaurora repositories so I don't know what file you are talking about. What's the URL?

git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware

[greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin -rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin

[greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin 4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin

I actually tested an older version of that file, but I assume the more recent one works fine too. I don't have a 9886/8 system available for testing at the moment.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#3 lore raw
Quoted 20 lines · Ben Greear
Quoted 5 lines · Kalle
Quoted 3 lines · Ben Greear

Newer 9886 (which use the 9888 firmware it seems) NICs will not boot unless you use the board-2.bin from the codeaura repo.

Quoted 8 lines
Quoted 4 lines

Kalle: Could you update your repo to the latest from codeaura so that it is easy to pull the latest board file into LEDE?

If you have reason not to, please let me know.

I'm not involved with codeaurora repositories so I don't know what file you are talking about. What's the URL?

git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware

[greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin -rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin

Quoted 6 lines

[greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin 4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin

I actually tested an older version of that file, but I assume the more recent one works
fine too. I don't have a 9886/8 system available for testing at the moment.

Ok, thanks. I'll ask internally why nobody has submitted that to me.

Signature · 5 lines
Kalle Valo
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#4 lore raw

Hi,

Whilst you're at it, the DK07 2G/5G-low and DK07 5G-high/5G-high board values would be good to add too. They're the same bmi-id though; there's a jumper to select radio0 as "2G or 5G-high RF path". You'd have to add them as separate files that people can select at runtime. :)

I think there's also the file for the DK07+Cascade and DK07+Besra 5G-low NICs that aren't in there by default. Lemme go dig up which files to use from where.

Thanks!

-adrian

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#5 lore raw
In reply to Ben Greear
Quoted 20 lines · Ben Greear
Quoted 5 lines · Kalle
Quoted 3 lines · Ben Greear

Newer 9886 (which use the 9888 firmware it seems) NICs will not boot unless you use the board-2.bin from the codeaura repo.

Quoted 8 lines
Quoted 4 lines

Kalle: Could you update your repo to the latest from codeaura so that it is easy to pull the latest board file into LEDE?

If you have reason not to, please let me know.

I'm not involved with codeaurora repositories so I don't know what file you are talking about. What's the URL?

git://codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware

[greearb@ben-dt3 ath10k-firmware]$ ls -l ath10k/QCA9888/hw2.0/board-2.bin -rw-rw-r--. 1 greearb greearb 60660 Mar 2 16:20 ath10k/QCA9888/hw2.0/board-2.bin

Quoted 6 lines

[greearb@ben-dt3 ath10k-firmware]$ md5sum ath10k/QCA9888/hw2.0/board-2.bin 4fffcdf246cea4a4fd5ba67730262563 ath10k/QCA9888/hw2.0/board-2.bin

I actually tested an older version of that file, but I assume the more recent one works
fine too. I don't have a 9886/8 system available for testing at the moment.

I got some updated to ath10k-firmware.git some time ago. Please check and let me know if something is still missing.

Signature · 5 lines
Kalle Valo
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k