shaping outbound ftp traffic
Quoted 3 lines
In theory yes, but it is shaping inbound transfers to my server.
YOu're not doing any other sort of Ingress filters are you??
No
Quoted 4 lines
I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason.
Could this be shaping on the ISP side?? What >happens when the tc rules are shut off??
No, everything works fine
Quoted 2 lines
Can you determine what ports are being used for >inbound data transfers? What makes you select those ports you defined as >the outbound??
Same ports, 50000-51000 and 65437.
I choose these ports because they are the ports that I have passive ftp traffic on and 65437 is the active ftp port.
I just dont understand why the inbound traffic is being limited. The outbound shaping works fine.
Script:
I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server.
Is there something I can change to make it not limit uploads to my server? #!/bin/bash
#shaping passive ftp traffic
# mark the outbound passive ftp packets on ports 50000-51000 iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > /dev/null iptables -t mangle -F MYSHAPER-OUT 2> /dev/null > /dev/null iptables -t mangle -X MYSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -N MYSHAPER-OUT
iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT
iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK --set-mark 20 iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK --set-mark 20 iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 26
# clear it tc qdisc del dev eth0 root
#add the root qdisk
tc qdisc add dev eth0 root handle 1: htb default 26
#add main rate limit class
tc class add dev eth0 parent 1: classid 1:1 htb rate 10000mbps
#add leaf classes
tc class add dev eth0 parent 1:1 classid 1:26 htb rate 10000mbps tc class add dev eth0 parent 1:1 classid 1:20 htb rate 39kbps
#filter traffic into classes
tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:20 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 26 fw flowid 1:26
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Yes, inbound is affected even though outbound transfers are suspended. The inbound in shaped to 39K. This is what totally confuses me. I thought with my script that only traffic leaving source ports 50000-51000 & 65437 should be shaped. But it is also shaping traffic entering my machine on the same ports.
.................
Is the inbound rate affected even if there are no outbound transfers? Is the speed actually being "limited" to a certain speed, or are you just noticing that the inbound/upload traffic is slower than it should be.
The reason I ask is because you're tagging all outbound ftp-data traffic (ports 50000:51000) and directing it to the class with 39kbps. If you have outbound/download transfers going, they may be using all the available outbound bandwidth for that class and causing outbound ACK packets (for the inbound/upload traffic) to queue and throttle the inbound speed.
Please don't flame me if I'm way off base...
Assumption:
- data connection is bi-directional. ie. the data connection is made on the specified PASV (server) ports (50000:51000) regardless of whether it's an upload or download.
Test:
- simply kill all downloads and see if the uploads are still affected.
- or you can tag oubound ACK packets and filter them into the faster class.
chris
Quoted 68 lines
Quoted 68 lines
Quoted 1 line
Quoted 1 line
Theory is.. You can only shape outbound traffic.
Inbound is via tcp windowshaping etc..
In theory yes, but it is shaping inbound transfers to my server.
Quoted 9 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK --set-mark 20
iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK --set-mark 20
iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 26Quoted 3 lines
Quoted 3 lines
Why do you care about destination port?
AFAIK, it shouldn't affect your wants since you're >not filtering on incoming trafficI dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason.
Quoted 1 line
Quoted 1 line
Is this legal?? 10000mbps?? Wow.. 10000*1E6?
I just did that to make sure lan traffic was not affected at all.
enire script for reference....
I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server.Is there something I can change to make it not limit uploads to my server? #!/bin/bash
#shaping passive ftp traffic# mark the outbound passive ftp packets on ports 50000-51000 iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > /dev/null iptables -t mangle -F MYSHAPER-OUT 2> /dev/null > /dev/null iptables -t mangle -X MYSHAPER-OUT 2> /dev/null > /dev/nulliptables -t mangle -N MYSHAPER-OUT
iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUTiptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK --set-mark 20
iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK --set-mark 20
iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 26# clear it tc qdisc del dev eth0 root#add the root qdisk
tc qdisc add dev eth0 root handle 1: htb default 26#add main rate limit class
tc class add dev eth0 parent 1: classid 1:1 htb rate 10000mbps#add leaf classes
tc class add dev eth0 parent 1:1 classid 1:26 htb rate 10000mbps tc class add dev eth0 parent 1:1 classid 1:20 htb rate 39kbps
Quoted 5 lines
Quoted 5 lines
#filter traffic into classes
tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:20
tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 26 fw flowid 1:26
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · On Fri, 2004-10-08 at 23:46, [email protected] wrote:
Yes, inbound is affected even though outbound transfers are suspended. The inbound in shaped to 39K. This is what totally confuses me. I thought with my script that only traffic leaving source ports 50000-51000 & 65437 should be shaped. But it is also shaping traffic entering my machine on the same ports.
Dude..
if TC is cleared, and I presume it _Is_ cleared of all rules, then there should _not_ be any limitation on inbound transfer rates. (neither will there be any outbound transfer rate problems either..
Please go to http://nyc.speakeasy.net/ and test your upload and download speeds
Signature · 7 lines
Ow Mun Heng Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel 2.6.7-2.jul1-interactive Neuromancer 11:01:52 up 1:45, 10 users, load average: 0.91, 0.89, 0.83 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · On Fri, 2004-10-08 at 23:46, [email protected] wrote:
Yes, inbound is affected even though outbound transfers are suspended. The inbound in shaped to 39K. This is what totally confuses me. I thought with my script that only traffic leaving source ports 50000-51000 & 65437 should be shaped. But it is also shaping traffic entering my machine on the same ports.
Dude..
if TC is cleared, and I presume it _Is_ cleared of all rules, then there should _not_ be any limitation on inbound transfer rates. (neither will there be any outbound transfer rate problems either..
Please go to http://nyc.speakeasy.net/ and test your upload and download speeds
Signature · 7 lines
Ow Mun Heng Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel 2.6.7-2.jul1-interactive Neuromancer 11:01:52 up 1:45, 10 users, load average: 0.91, 0.89, 0.83 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/