powerpc/perf/hv-gpci: Fix the logic to compute counter value from the hcall result buffer.
PATCH 1/1 powerpc/perf/hv-gpci: Fix the logic to compute counter value from the hcall result buffer.
H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in the result buffer. Result buffer has specific format defined in the PAPR specification. One of the field is counter offset and width of the counter data returned.
Counter data are returned in a unsigned char array. To
get the final counter data, these values should be left shifted byte at a time. But commit 220a0c609ad17 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface") made the shifting bitwise. Because of this, hcall counters values could end up in lower side, which messes the counter prev vs now calculation. This lead to huge counter value reporting
[command]#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
time counts unit events
1.000078854 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.000213293 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
3.000320107 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
4.000428392 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
5.000537864 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
6.000649087 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
7.000760312 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
8.000865218 16,448 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
9.000978985 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
10.001088891 16,384 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
11.001201435 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
12.001307937 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Patch here fixes the shifting logic to make is byte-wise with which no more the issue seen.
--- arch/powerpc/perf/hv-gpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/perf/hv-gpci.c +1 -1
@@ -175,7 +175,7 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,*/ count =0 ;for (i = offset; i < offset + length; i++) - count |= arg->bytes[i] << (i - offset); + count |= (u64)(arg->bytes[i]) << ((length -1 - (i - offset)) *8 ); *value = count; out:
Signature · 1 line
2.26.2
Quoted 29 lines · Kajol Jain
H_GetPerformanceCounterInfo(0xF080) hcall returns the counter data in the result buffer. Result buffer has specific format defined in the PAPR specification. One of the field is counter offset and width of the counter data returned.Counter data are returned in a unsigned char array. To
get the final counter data, these values should be left shifted byte at a time. But commit220a0c609ad17("powerpc/perf: Add support for the hv gpci (get performance counter info) interface") made the shifting bitwise. Because of this, hcall counters values could end up in lower side, which messes the counter prev vs now calculation. This lead to huge counter value reporting[command]#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
time counts unit events
1.000078854 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.000213293 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
3.000320107 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
4.000428392 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
5.000537864 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
6.000649087 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
7.000760312 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
8.000865218 16,448 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
9.000978985 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
10.001088891 16,384 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
11.001201435 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
12.001307937 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Quoted 5 lines
Patch here fixes the shifting logic to make is byte-wise with which no more the issue seen.
Fixes e4f226b1580b3 ("powerpc/perf/hv-gpci: Increase request buffer size")Reported-by Nageswara R Sastry<[email protected]>Signed-off-by Kajol Jain <[email protected]>
Now not seeing huge numbers.
# perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000
# time counts unit events
1.001023931 26,624
hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.002176767 0
hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
3.003296382 0
hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
4.004385311 33,280
hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/Quoted 18 lines
--- arch/powerpc/perf/hv-gpci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/powerpc/perf/hv-gpci.c +1
-1@@ -175,7 +175,7 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,*/ count =0 ;for (i = offset; i < offset + length; i++) - count |= arg->bytes[i] << (i - offset); + count |= (u64)(arg->bytes[i]) << ((length -1 - (i - offset)) *8 ); *value = count; out:
Signature · 2 lines
Thanks and Regards R.Nageswara Sastry
Michael Ellerman
AppliedQuoted 13 lines · Kajol Jain
H_GetPerformanceCounterInfo(0xF080) hcall returns the counter data in the result buffer. Result buffer has specific format defined in the PAPR specification. One of the field is counter offset and width of the counter data returned.Counter data are returned in a unsigned char array. To
get the final counter data, these values should be left shifted byte at a time. But commit220a0c609ad17("powerpc/perf: Add support for the hv gpci (get performance counter info) interface") made the shifting bitwise. Because of this, hcall counters values could end up in lower side, which messes the counter prev vs now calculation. This lead to huge counter value reporting
Quoted 1 line
[...]
Applied to powerpc/next.
[1/1] powerpc/perf/hv-gpci: Fix the logic to compute counter value from the hcall result buffer.
https://git.kernel.org/powerpc/c/f9addd85fbfacf0d155e83dbee8696d6df5ed0c7
cheers