Skip to contentSkip to conversation

ARM: mm: Remove virtual address print from B15 RAC driver

PATCH Applied Florian Fainelli 1 participant 2 messages May 6, 2020 – May 10, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: mm: Remove virtual address print from B15 RAC driver

We would be trying to print the kernel virtual address of the base register address which is not very useful and is not displayed by default because of pointer restriction. Print the Device Tree node name instead which is what was originally intended.

---
Russell, if this is okay with you, I would like to carry this through the Broadcom ARM SoC pull request. Thank you

 arch/arm/mm/cache-b15-rac.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/mm/cache-b15-rac.c +1 -2
index 3471fc64a3ae..bdc07030997b 100644
@@ -358,8 +358,7 @@ static int __init b15_rac_init(void)
 	set_bit(RAC_ENABLED, &b15_rac_flags);
 	spin_unlock(&rac_lock);
 
-	pr_info("Broadcom Brahma-B15 readahead cache at: 0x%p\n",
-		b15_rac_base + RAC_CONFIG0_REG);
+	pr_info("%pOF: Broadcom Brahma-B15 readahead cache\n", dn);
 
 	goto out;
 
Signature · 1 line
2.17.1
author Applied
#1 lore raw
Quoted 6 lines · Florian Fainelli

We would be trying to print the kernel virtual address of the base register address which is not very useful and is not displayed by default because of pointer restriction. Print the Device Tree node name instead which is what was originally intended.

Applied to soc/next, thanks!

Signature · 1 line
Florian