Skip to contentSkip to conversation

Memory Tests in U-Boot

DISCUSSION [email protected] 4 participants 4 messages Nov 19, 2019 – Nov 23, 2019

lore
Share & tools
lore
#0 lore raw

Hi,

In U-Boot I found some generic memory tests commands like mtest and post tests. But I need complete DDR4 memory test with below algorithms:

* Checkerboard Test
* March C- Test
* Neighborhood Pattern Sensitive Fault

Can I get any reference code for these algorithms in U-Boot ? Implementation for these algorithms available in any of U-Boot version ?

Thanks and Regards,
Devendra

#1 lore raw
Quoted 10 lines · On 11/19/19 7:28 AM, [email protected] wrote:

Hi,

In U-Boot I found some generic memory tests commands like mtest and post tests. But I need complete DDR4 memory test with below algorithms:

* Checkerboard Test
* March C- Test
* Neighborhood Pattern Sensitive Fault

Can I get any reference code for these algorithms in U-Boot ? Implementation for these algorithms available in any of U-Boot version ?

I don't know if any of the (too many) versions of u-boot have that feature. If you are willing to test from userspace, there is memtester:

https://layers.openembedded.org/layerindex/recipe/863/

I don't think it has all of the tests you asked for but it would be good if you could take a look and report back here for those interested.

Here's a test run that a web search returned:
https://www.lightsoftai.com/?p=113

Also, the stress-ng has some memory tests including one that tests neighbour sensitivity:
https://layers.openembedded.org/layerindex/recipe/104982/

man stress-ng:

galpat-0

galloping pattern zeros. This sets all bits to 0 and flips just 1 in 4096 bits to 1. It then checks to see if the 1s are pulled down to 0 by their neighbours or of the neighbours have been pulled up to 1.

Good luck and please let us know what you find,

../Randy

Quoted 3 lines

Thanks and Regards,
Devendra

Signature · 2 lines
# Randy MacLeod
# Wind River Linux
#2 lore raw
In reply to [email protected]
Quoted 11 lines · On Tue, 19 Nov 2019, at 12:28, [email protected] wrote:

Hi,

In U-Boot I found some generic memory tests commands like mtest and post tests. But I need complete DDR4 memory test with below algorithms:

* Checkerboard Test
* March C- Test
* Neighborhood Pattern Sensitive Fault

Can I get any reference code for these algorithms in U-Boot ? Implementation for these algorithms available in any of U-Boot version ?

You may be better asking this on the u-boot list <[email protected]>.

Signature · 1 line
Paul Barker
#3 lore raw

Hello,

Quoted 11 lines · Paul Barker
Quoted 9 lines · On Tue, 19 Nov 2019, at 12:28, [email protected] wrote:

Hi,

In U-Boot I found some generic memory tests commands like mtest and post tests. But I need complete DDR4 memory test with below algorithms:

* Checkerboard Test
* March C- Test
* Neighborhood Pattern Sensitive Fault

We found stressapptest (by Google) the most reliable test for DDR calibration problems.

We have seen unreliable systems pass other memory tests such as in U-Boot.

Regards, Leon

Quoted 2 lines

--

Leon Woestenberg
[email protected]
T: +31 40 711 42 76
M: +31 6 472 30 372

Sidebranch
Embedded Systems
Eindhoven, The Netherlands
http://www.sidebranch.com