newbie about how to route
I have 2 linux boxes connected to a switch:
box1:
eth0 192.168.0.200/255.255.255.0
eth1 public address from ISP dhcp
box2:
eth0 192.168.0.35/255.255.255.0
box3:
eth0 192.168.1.3/255.255.255.0
I want box1 to act as a gateway to the internet (it is doing this now for box2),
but also want to communicate from box2 to box3 through box1, and that box3 can use the internet through box1.
how can I do this?
TIA,
--Nicolas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Nicolas Patik" <[email protected]>
To: "LARTC" <[email protected]>
Sent: Friday, December 24, 2004 6:39 AM
Subject: [LARTC] newbie about how to route
Quoted 11 lines
I have 2 linux boxes connected to a switch:
box1:
eth0 192.168.0.200/255.255.255.0
eth1 public address from ISP dhcpbox2:
eth0 192.168.0.35/255.255.255.0box3:
eth0 192.168.1.3/255.255.255.0
Why you don't put box3 into the same ip range of box1? then, the only thing to do is put the default gateway to 192.168.0.200 and do a iptables masquerade from eth0 to eth1 into box1 and enable ip_forward in /etc/network/options
Quoted 6 lines
I want box1 to act as a gateway to the internet (it is doing this now for box2),
but also want to communicate from box2 to box3 through box1, and that box3 can use the internet through box1.
Quoted 8 lines
how can I do this?
TIA,
--Nicolas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/